Stability between single and segmental maxillary osteotomies in bimaxillary surgery for cleft-associated class III deformity: a CBCT study.

OBJECTIVE: Segmental Le Fort I osteotomy through the cleft is a common strategy to narrow the alveolar cleft in adults. This study compared skeletal stability between single and segmental Le Fort I osteotomies in patients with unilateral cleft lip and palate (UCLP). MATERIALS AND METHODS: This retrospective analysis examined 45 adults with complete UCLP-associated class III deformities who underwent bimaxillary surgery with either single (n = 30) or segmental (n = 15) Le Fort I advancement. Cone beam computed tomography (CBCT) scans of the facial skeleton were acquired before surgery, 1-week postsurgery, and at follow-up. Measures of landmarks from the CBCT images for the two treatment groups were compared for translation (left/right, posterior/anterior, superior/inferior) and rotation (yaw, roll, pitch). RESULTS: Postsurgery, the downward movement of the maxilla was larger in the segmental group than the single group. At follow-up, the maxilla moved backward in both groups, and upward in the segmental group. The mandible moved forward and upward and rotated upward in both groups. The amount of upward movement and rotation was larger in the segmental group than the single group. CONCLUSIONS: Two years after bimaxillary surgery in patients with UCLP-associated class III deformity, greater relapse was found after segmental Le Fort I osteotomies in vertical translation of the maxilla and mandible, and pitch rotation of the mandible compared with single Le Fort I osteotomies. CLINICAL RELEVANCE: The vertical relapse of the maxilla was larger after segmental Le Fort I advancement compared with single Le Fort I advancement in clefts.

Skeletal and upper airway stability following modified maxillomandibular advancement for treatment of obstructive sleep apnea in skeletal class I or II deformity.

OBJECTIVES: Maxillomandibular advancement (MMA) is an effective short-term treatment for obstructive sleep apnea (OSA). This study aimed to evaluate the long-term stability of the facial skeleton, upper airway, and its surrounding structures, as well as improvement in OSA following MMA. MATERIALS AND METHODS: Thirty-one adults with moderate-to-severe OSA underwent surgery-first modified MMA as primary surgery. Polysomnography and cone-beam computed tomography were obtained pre-surgery, early post-surgery, and at follow-up (i.e., ≥ 2 years post-surgery). Image analysis software assessed the facial skeleton, upper airway, and its surrounding structures. RESULTS: Early post-surgery, apnea-hypopnea index (AHI) had decreased significantly (p < 0.001) and the minimum oxygen saturation (MSAT) increased (p = 0.001), indicating significant improvement in OSA. At follow-up, the AHI and MSAT remained stable. However, the anterior maxilla, soft palate, and tongue moved backward while the hyoid moved downward. There was also a significant decrease in the minimal cross-sectional area of the oropharynx. The reduction in AHI was significantly related to the anterior movement of the anterior maxilla and tongue, inferior movement of the posterior maxilla, and superior movement of the soft palate tip. CONCLUSIONS: The improvement of OSA after modified MMA remained stable for at least 2 years following treatment, despite the relapse of the facial skeleton, upper airway, and its surrounding structures. The reduction of AHI was not related to changes in the caliber of the upper airway but to the movement of the maxilla, soft palate, and tongue. Clinical relevance Modified MMA is clinically effective for long-term treatment of patients with moderate-to-severe OSA.

Comparison of stability and outcomes of surgery-first bimaxillary surgery for skeletal class III deformity between unilateral and bilateral cleft lip and palate.

OBJECTIVES: Some adults with cleft lip and palate (CLP) require orthognathic surgery due to skeletal deformity. This prospective study aimed to (1) compare skeletal stability following bimaxillary surgery for correction of class III deformity between patients with unilateral CLP (UCLP) and bilateral CLP (BCLP), and (2) identify risk factors of stability. MATERIALS AND METHODS: Adults with CLP and skeletal class III deformities who underwent surgery-first bimaxillary surgery were divided into two groups according to cleft type: UCLP (n = 30) and BCLP (n = 30). Skeletal stability was assessed with measures from cone beam computed tomography images of the maxilla and mandible taken before treatment, 1-week and ≥ 1 year postsurgery for translation (left/right, posterior/anterior, superior/inferior) and rotation (yaw, roll, pitch); multiple regression analysis examined risk factors. RESULTS: At follow-up, the maxilla moved upwards in both groups, and backwards in the UCLP group. The mandible moved forward and upward, shifted to the cleft (deviated) side, and rotated upward in both groups. The amount of surgical advancement was a risk factor for sagittal stability in the maxilla (ß = -0.14, p < 0.05). The mandible had three risk factors for sagittal stability: age (ß = -0.23, p < 0.05), surgical team (ß = -1.83, p < 0.05), and amount of surgical setback (ß = -0.32, p = 0.001). CONCLUSIONS: Two years after bimaxillary surgery, patients with UCLP had a higher sagittal relapse of the maxilla compared with patients with BCLP, which was due to a greater surgical advancement in the patients with UCLP. CLINICAL RELEVANCE: Surgery-first bimaxillary surgery results in favorable treatment outcomes for correction of cleft-related class III deformity. Severity of jaw discrepancy and surgeons should be considered in the surgical design of overcorrection.

The Relationship Between Inter-canthal Distance and Implant Height in Asian Rhinoplasty.

Augmentation rhinoplasty is one of the top three anesthetic surgeries in Asia. I-shaped silicone-polytetrafluoroethylene composite implants are feasible for both primary and secondary augmentation rhinoplasty in Asians. This series was to analyze and evaluated the effect of the rhinoplasty to the intercanthal distance and to compare the height of the implantation with those differences in ICD before and after rhinoplasty. We retrospectively reviewed data from a single medical center via a single surgeon (Hsiao YC), at Chang Gung Memorial Hospital, between 2011 and 2017 with follow-up through 2018. There were 223 patients who received augmentation rhinoplasty with an I-shaped composite silicone-polytetrafluoroethylene ePTFE-lined silicone dorsal composite implant (Implantech, Ventura, CA) with a glabellar component (chimeric technique) or without a glabellar component. There were 169 patients with the height of the I-shaped composite implant over 3 mm, and 15 patients were less than 3 mm. There was no distribution significance between two groups even in gender, age, type of surgery, or indication. The paired difference of ICD/IPD ratio was statistically significant in the group with the height of composite implant over 3 mm (1.04% ± 0.11, p < 0.005, 95%). The normalized ratio of the ICD to IPD is estimated to decrease by 1-2%. Appropriate candidates including those with a wide ICD should be informed about these data during preoperative decision-making.Level of Evidence V This journal requires that authors assign a level of evidence to each article. For a full description of these Evidence-Based Medicine ratings, please refer to the Table of Contents or the online Instructions to Authors www.springer.com/00266 .

Simultaneous Fat Injection for Nasal Contouring in Orthognathic Patients.

BACKGROUND: Augmentation rhinoplasty with autologous fat grafting is a useful procedure to meet the demand for facial harmonization in the Asian population. We used this procedure during orthognathic surgery to address inadequate dorsum projection. This prospective study was conducted to determine the fat retention rate in patients undergoing simultaneous autologous fat injection augmentation rhinoplasty and orthognathic surgery. METHODS: Nineteen patients were treated with simultaneous bimaxillary orthognathic surgery and autologous fat grafting of the nasal dorsum and tip. The paired t test was used to compare the nasal volumes before and at least 6 months after surgery measured by 3-dimensional computer tomography scans. All measurements were performed twice by the same evaluator at least 2 weeks apart for intrarater consistency. RESULTS: Seventeen patients completed the study. The volume means before and after surgery were 22.3 ± 4.6 cm3 and 23.3 ± 4.7 cm3, respectively, with a mean difference of 1.0 ± 0.3 cm3 (P < .001). The mean retention rate was calculated to be 50.5% ± 7.0% (range: 40.5%-64.7%). Intrarater consistency was high with a Cronbach α of .97 (P < .001) and .98 (P < .001), respectively. CONCLUSION: This prospective study provides objective graft retention measurements for fat injection augmentation rhinoplasty combined with orthognathic surgery. All patients were satisfied with the results and no complications or additional morbidity was noted in the postoperative course. We consider this procedure to be a safe, reliable, and powerful adjunct to improve the aesthetic results of orthognathic surgery.

The willingness to attend the first dental visit within 1 year of age: An analysis applying Andersen's behavioral model of health service utilization.

BACKGROUND: The first dental visit (FDV) within 1 year of age is important for establishing good oral health behaviors for young children, but delayed FDVs are common. AIM: This study aimed to investigate the predisposing, enabling, and need factors of maternal willingness to attend the FDV for infants. DESIGN: A cross-sectional survey was conducted among mothers of infants aged 11-14 months. A questionnaire was developed based on Andersen's behavioral model of health service utilization. Data regarding the FDV, FDV willingness, and reasons for not attending the FDV were collected. Logistic regression models were used to investigate the associated factors. RESULTS: Of 658 infants, only 2.7% (18) had a Thirty percent (191/640) of mothers reported their willingness to attend the FDV in the next 3 months. Nearly two-thirds of mothers reported not attending the FDV since their children's teeth were healthy. Maternal perceptions of their infants' oral health status were negatively associated with willingness to undergo the FDV, whereas family social support was positively associated with willingness to undergo the FDV. CONCLUSIONS: Need factors play a key role in the utilization of FDV. Improving parental awareness of FDV might help parents voluntarily attend the FDV, and offering support from the family and healthcare system levels enables access to paediatric dental care.

Patient satisfaction and quality of life after orthodontic treatment for cleft lip and palate deformity.

OBJECTIVES: Patients with cleft lip-cleft palate (CLP) often require orthodontic treatment, with or without orthognathic surgery. Patient satisfaction is the most important outcome parameter in orthodontic treatment. This study aimed to (1) determine patient satisfaction and quality of life (QoL) after orthodontic treatment and (2) identify associated factors. MATERIAL AND METHODS: This prospective cross-sectional study recruited patients with CLP who had completed orthodontic treatment at a craniofacial center in Taiwan. Participants (N=213) had received treatment for unilateral CLP (n=99), bilateral CLP (n=50), cleft lip and alveolus (n=39), and isolated cleft palate (n=25). Self-report questionnaires evaluated satisfaction with appearance and QoL; multiple regression analysis examined associated factors. Participants' expectations of treatment results were also reported. RESULTS: Participants reported moderate satisfaction with facial appearance and QoL. Satisfaction with treatment was lower or much lower than expected for 13% of participants. Treatment for bilateral CLP was associated with the lowest satisfaction with overall appearance (r = -8.123, P < 0.05); participants who had received orthognathic surgery had the highest satisfaction (r = 5.534, P < 0.05). Treatment for unilateral and bilateral CLP was associated with low QoL for smile (both P < 0.05). CONCLUSIONS: Orthodontic treatment had a positive effect on facial appearance and quality of life in patients with CLP. Type of cleft and orthognathic surgery significantly influenced satisfaction with facial appearance. CLINICAL RELEVANCE: Efforts must be taken to modify treatment strategies for patients with bilateral CLP in order to improve satisfaction with appearance following treatment.

Comparative stability and outcomes of two surgical approaches for correction of class III asymmetry with lip or occlusal cant.

OBJECTIVES: To assess and compare the stability and outcomes of the two surgical approaches for patients with roll asymmetry. MATERIALS AND METHODS: A total of 50 adult patients were consecutively recruited for this prospective study. Patients with class III asymmetry and lip or occlusal cant who underwent bimaxillary surgery were grouped according to surgical approach: asymmetric posterior impaction on both sides (API, n = 31) and posterior impaction on one side and posterior extrusion on the other side (PIE, n = 19). Postsurgical stability and outcomes between groups were determined with cone-beam computed tomography for facial midline, lip, and occlusal cant at 1 week (T1), and at least 12-month postsurgery (T2, completion of orthodontic treatment). RESULTS: Presurgery, the upper anterior occlusal cant and lip cant were significantly greater for the PIE group (p < 0.05). Postsurgery (T2), the mandible moved upward and rotated upward in both groups. However, the upward rotation was significantly greater in the PIE group compared with the API group. Although the two approaches resulted in significant improvements in facial symmetry, the deviation in the facial midline remained under-corrected for most API patients. CONCLUSIONS: Patient outcomes for mandibular stability and facial symmetry differed between the two surgical approaches for correction of class III asymmetry with lip or occlusal cant. CLINICAL RELEVANCE: The findings of this study suggest that planned over-correction is a reasonable option for the approach of asymmetric posterior impaction on both sides.

The Upper Buccal Musculomucosal Flap for Nasal Lining and Columellar Defect Reconstruction.

ABSTRACT: Restoring the nasal lining is a great challenge in the reconstruction of nasal defects. In this series, the authors present our experience in using the upper buccal musculomucosal (UBMM) flap for the reconstruction of full thickness columellar or nasal lining defects. Ten patients who underwent UBMM flap reconstruction of columellar or nasal lining defects, with or without composite grafting, were identified between December of 2014 and February of 2017. The records were retrospectively reviewed to determine the demographics, nasal deformity etiology, surgical technique, complications, flap survival rate and duration of follow-up. Of these ten patients, three were men, and seven were women; the average age was 48.1 years (range, 34-66 years). Four patients underwent bilateral UBMM flaps, and 6 patients underwent unilateral UBMM flap reconstruction. All of the donor sites were closed without complications, except for one small granuloma that occurred 8 months later. Of the total 14 flaps, 7 healed well, 6 healed well after minimal debridement in the clinic, and one failed and was replaced with a contralateral UBMM flap. The average follow-up time was 20.1 months (range, 8-38 months). All patients had satisfactory aesthetic and functional outcomes. Due to the limited availability of healthy local tissue for nasal lining reconstruction after multiple surgeries, the UBMM flap serves as an applicable choice to restore columellar or nasal lining defects, with minimal donor site morbidity and no visible external scarring.

Association of siblings' presence and oral health-related quality of life among children: a cross-sectional study.

BACKGROUND: The quantity-quality trade-off theory indicates that an increase in siblings might decrease a child's well-being, but little is known about the impacts of sibling number on children's oral health-related quality of life (OHRQoL). This study aims to investigate the effects of presence of siblings on children's OHRQoL, and to further test whether there is an interaction effect between siblings' presence and locations on children's OHRQoL. METHODS: Data were obtained from an oral-health survey of 12-year-old children in Beijing, China, which was a part of the 4th National Oral Health Survey in the Mainland of China (2015-2016). This study included 2158 children data for analysis. OHRQoL was assessed by the child's Oral Impacts on Daily Performance (OIDP). OIDP prevalence served as an indicator of OHRQoL. Children with and without siblings were recorded as non-single and single children, respectively. Dental variables, including active caries, gingival bleeding, and calculus, were reported. A logistic regression model was applied to investigate the association of siblings' presence and OIDP prevalence. A synergy index was used to assess the possible interaction effect between siblings' presence and location on OIDP prevalence. RESULTS: Sixty percent of Chinese children reported suffering OIDP in the previous six months. OIDP prevalence for non-single and single children were 68.3% and 56.9%, respectively. The adjusted odds ratio (OR) of OIDP for non-single children was 1.31 (95% CI: 1.05, 1.63), and the adjusted OR of OIDP for non-single and rural children was 2.03 (95% CI: 1.47, 2.81). The synergy index between siblings' presence and location on OIDP was 2.18 (85% CI: 1.30, 3.67), which indicates that an excessive risk increase for OIDP was observed among non-single and rural children. CONCLUSIONS: Children with siblings are more likely to report OIDP and have lower OHRQoL, especially those from rural areas. These findings indicate that oral-health interventions should be given priority for non-single and rural children.

Geometric accuracy of an acrylonitrile butadiene styrene canine tibia model fabricated using fused deposition modelling and the effects of hydrogen peroxide gas plasma sterilisation.

BACKGROUND: Three-dimensional (3D) printing techniques have been used to produce anatomical models and surgical guiding instruments in orthopaedic surgery. The geometric accuracy of the 3D printed replica may affect surgical planning. This study assessed the geometric accuracy of an acrylonitrile butadiene styrene (ABS) canine tibia model printed using fused deposition modelling (FDM) and evaluated its morphological change after hydrogen peroxide (H2O2) gas plasma sterilisation. The tibias of six canine cadavers underwent computed tomography for 3D reconstruction. Tibia models were fabricated from ABS on a 3D printer through FDM. Reverse-engineering technology was used to compare morphological errors (root mean square; RMS) between the 3D-FDM models and virtual models segmented from original tibia images (3D-CT) and between the models sterilised with H2O2 gas plasma (3D-GAS) and 3D-FDM models on tibia surface and in cross-sections at: 5, 15, 25, 50, 75, 85, and 95% of the tibia length. RESULTS: The RMS mean ± standard deviation and average positive and negative deviation values for all specimens in EFDM-CT (3D-FDM vs. 3D-CT) were significantly higher than those in EGAS-FDM (3D-GAS vs. 3D-FDM; P < 0.0001). Mean RMS values for EFDM-CT at 5% bone length (proximal tibia) were significantly higher than those at the other six cross-sections (P < 0.0001). Mean RMS differences for EGAS-FDM at all seven cross-sections were nonsignificant. CONCLUSIONS: The tibia models fabricated on an FDM printer had high geometric accuracy with a low RMS value. The surface deviation in EFDM-CT indicated that larger errors occurred during manufacturing than during sterilisation. Therefore, the model may be used for surgical rehearsal and further clinically relevant applications in bone surgery.

History and Evolution of Orthognathic Surgery at Chang Gung Craniofacial Center: Lessons Learned From 35-Year Experience.

BACKGROUND: Modern orthognathic surgery (OGS) was established on the basis of contributions from multidisciplinary centers worldwide. This study reports the history and evolution of OGS at the Chang Gung Craniofacial Center (CGCC) and identifies the lessons learned from 35 years of experience. METHODS: The total number of OGS procedures managed by the CGCC multidisciplinary team between 1981 and 2016 was determined. The database of the senior author (Y.-R.C.) was reviewed for consecutive OGS procedures performed between 2003 and 2016. A literature review was also performed to retrieve the contributions from the total CGCC team. RESULTS: The 35 years of experience at a single center and 13-year experience of a single surgeon corresponded to 8073 and 2883 OGS procedures, respectively. Moreover, 53 peer-reviewed articles were reviewed. Teamwork (plastic surgeons, orthodontists, and anesthetists) ensured an optimal balance between occlusion functional and facial aesthetic outcomes, with patient safety ensured and a minimum of OGS-related complications. Progression from the conventional orthodontics-first approach to the surgery-first OGS approach decreased the overall treatment time. Transition from 1-jaw to 2-jaw surgery enabled more consistent aesthetic outcomes to be achieved. Conversion from the 2-splint to the single-splint technique enabled development of a more precise tridimensional simulation plan and surgical execution, including in challenging scenarios such as malocclusion associated with facial asymmetry. Clockwise pitch rotation of the maxillomandibular complex has been designed for facial aesthetic purposes in class III malocclusion, whereas counterclockwise pitch rotation of the maxillomandibular complex improves airway function in those with sleep apnea. CONCLUSIONS: The lessons learned from experience and outcome-based articles reveal that OGS has successfully evolved at the CGCC, with a balance being achieved between functional and aesthetic outcomes and effective decreases in the burden of care (ie, morbidity, complications, and treatment time).

Enhancement of PVDF Sensing Characteristics by Retooling the Near-Field Direct-Write Electrospinning System.

This research aimed to develop a direct-write near-field electrospinning system (DW-NFES) with three-axis positioning of controllable speed, torque and position to produce sizable and high-quality piezoelectric fibers for sensing purposes. Sensor devices with high electrical response signals were developed and tested. To achieve DW-NFES purpose, a servo motor controller was designed to develop a high response rate, accurate positioning, and stable mobile device through the calculation of bandwidth and system time delay. With this retooled system of DW-NFES, controllable and uniform size fibers in terms of diameters, stretching force, and interspaces can be obtained. Sensor devices can be made selectively without a complicated lithography process. The characteristics of this DW-NFES platform were featured by high response rate, accurate positioning, and stable movement to make fibers with high piezoelectric property. In this study, polyvinylidene fluoride (PVDF) was used to explore and enhance their sensing quality through the platform. The parametric study of the process factors on piezoelectric sensing signals mainly included the concentration of electrospinning PVDF solution, high voltage electric field, and collection speed. Finally, the surface morphology and piezoelectric properties of the as-electrospun PVDF fibers were examined by scanning electron microscopy (SEM) and characterized by electrical response measurement techniques. The results showed that the fiber spinning speed of the DW-NFES system could be increased to ~125 from ~20 mm/s and the accuracy precision was improved to ~1 from ~50 µm, compared to conventional step motor system. The fiber diameter reached ~10 µm, and the electrospinning pitch reached to as small as ~10 µm. The piezoelectric output voltage of the electrospun fibers was increased ~28.6% from ~97.2 to ~125 mV; the current was increased ~27.6% from ~163 to ~208 nA, suggesting that the piezoelectric signals can be enhanced significantly by using this retooled system. Finally, an external control module (Arduino-MAGE) was introduced to control the PVDF piezoelectric fiber sensors integrated as a sensing array. The behavior of long-term sedentary patients can be successfully detected by this module system to prevent the patients from the bedsores.

Facile one-step targeted immobilization of an enzyme based on silane emulsion self-assembled molecularly imprinted polymers for visual sensors.

Immobilized enzymes play significant roles in many practical applications. However, the enzymes need to be purified before immobilization by conventional immobilizing methods, and the purification process is expensive, laborious, complicated and results in a decrease of the enzymatic activity. So, we present a novel method by a facile one-step targeted immobilization of an enzyme without a purification process from complex samples. For this purpose, a novel molecularly imprinted polymer was prepared via a silane emulsion self-assembly method using boric acid-modified Fe3O4 nanoparticles as magnetic nuclei, horseradish peroxidase as a template, 3-aminopropyltriethoxysilane as a functional monomer and tetraethyl orthosilicate as a crosslinking agent. The molecularly imprinted polymers were characterized using a scanning electron microscope, X-ray photoelectron spectroscope, vibrating sample magnetometer and X-ray diffractometer. The as-prepared and characterized materials were employed to immobilize horseradish peroxidase from a crude extract of horseradish. Moreover, the immobilized horseradish peroxidase was employed to develop visual sensors for the detection of glucose and sarcosine. This study demonstrated that the molecularly imprinted polymers prepared via the silane emulsion self-assembly method can facilely immobilize horseradish peroxidase from a crude extract of horseradish without any purification process. The developed visual method based on the immobilized horseradish peroxidase shows great potential applications for the visual detection of glucose and sarcosine.

Molecularly imprinted polymer solid-phase microextraction coupled with ultra high performance liquid chromatography and tandem mass spectrometry for rapid analysis of pyrrolizidine alkaloids in herbal medicine.

Pyrrolizidine alkaloids are the most widely distributed natural toxins, and pyrrolizidine alkaloid-containing herbal medicines are probably the most common poisonous plants affecting humans. We reported pyrrolizidine alkaloid-molecularly imprinted polymer solid-phase microextraction for the selective adsorption of toxic pyrrolizidine alkaloids from herbal medicine. A sulfonic compound, sodium allylsulfonate, was chosen as the functional monomer to interact with pyrrolizidine alkaloids through strong ionic interaction. To avoid template leakage and for the aim of cost saving, a relatively cheap dummy template was used for the fabrication of molecularly imprinted polymer-solid-phase microextraction fibers. The obtained fibers showed selective adsorption ability for four pyrrolizidine alkaloids, including europine, echimidine, lasiocarpine, and heliotrine. The extraction parameters, such as extraction time, extraction temperature, shaking speed, elution solvent and elution time, were optimized. Then ultra high performance liquid chromatography with mass spectrometry coupled with molecularly imprinted polymer-solid-phase microextraction method was developed for the fast and efficient analysis of four pyrrolizidine alkaloids from the model herbal plant Farfarae Flos. The established method was validated and exhibited satisfactory accuracy and precision. The present method provides an innovative and fast analytical strategy for the determination of trace toxic pyrrolizidine alkaloids in complicated samples.

Simultaneous Surgical Correction of Skeletal Class III Dentofacial Deformity During Acute Management of Facial Fractures: Patient Selection and Surgical Technique.

BACKGROUND: Mandibular prognathism is a common dentofacial deformity in Asia. Treatment of such condition may vary from orthodontic camouflage to surgical orthodontics with orthognathic surgery depending on the severity of the condition. Because of the prominent position of the mandible, fractures involving different locations of the mandible commonly occur in maxillofacial trauma. Anatomical reduction of maxillofacial fractures and restoration of the pretraumatic occlusion are the primary goals of acute management of facial fractures. In patients with dentofacial deformity, simultaneous surgical correction of their malocclusion and improvement of their facial aesthetics while providing open treatment to the maxillofacial fractures are rarely reported in the literature. PATIENTS AND METHODS: We reported 3 cases with combined open reduction and internal fixation and surgery-first orthognathic surgery principles to correct class III malocclusion with mandibular prognathism during acute management of maxillofacial fractures. Computer-assisted surgical simulation was used in surgical planning and fabrication of surgical splint. RESULTS: Two patients underwent mandibular osteotomies in addition to open reduction and internal fixation of maxillofacial fractures. One patient had both maxillary and mandibular osteotomies during facial fracture repair. Class I occlusion with satisfactory facial profile was achieved in all 3 cases. CONCLUSIONS: Careful patient selection with presurgical planning using computer-assisted surgical simulation is essential in achieving successful outcomes in correcting dentofacial deformities while managing maxillofacial fractures. This combined technique is a viable option in the surgical management of facial fractures in patients with dentofacial deformities.

The association between clinical diagnostic factors and the prevalence of vertical root fracture in endodontic surgery.

BACKGROUND/PURPOSE: Diagnosis of vertical root fractures (VRFs) can often be challenging due to the similarity of signs and symptoms with other common dental infectious diseases. This study was aimed at evaluating the potential relationship between VRFs and commonly used clinical diagnostic factors. METHODS: 330 root-filled teeth with endodontic failures were subjected to endodontic microsurgery over a six-year period. VRFs were identified in 61 teeth. A randomly age- and sex-matched retrospective case-control study was conducted on a subset of 59 root-filled teeth with VRFs (cases) and 177 root-filled teeth without VRFs (controls). The strength of association between preoperative signs and radiographic findings and VRFs was evaluated using logistic regression model. RESULTS: Sinus tract, periodontal pocket depth ≥5 mm, periodontal swelling or abscess, and radiological image of J-shaped or "halo" radiolucency were significantly more frequent in cases than in controls (p < 0.05). With regard to logistic regression analysis, J-shaped or "halo" radiolucency demonstrated the greatest association with VRF, followed by periodontal pocket depth ≥5 mm, sinus tract, and periodontal swelling or abscess. Approximately 70% of cases manifested themselves as combinations of at least two of these factors. Teeth having two and three or four of these factors had 3.14 times and 11.64 times higher risks for the presentations of VRFs, respectively (p < 0.001). CONCLUSION: The major risk for VRFs was represented by those presenting radiological image of J-shaped or "halo" radiolucency, periodontal pocket depth ≥5 mm, sinus tract, and periodontal swelling or abscess simultaneously.

Onlay Fascial Grafts to Silicone-Polytetrafluorethylene Composite Implants in Augmentation Rhinoplasty: A Retrospective Study of 241 Cases.

BACKGROUND: Silicone-polytetrafluoroethylene composite implants are fast gaining popularity in Asian rhinoplasty. Nonetheless, implant displacement, erythematous reactions, and infections still occur in the authors' patient group during long-term follow-up. OBJECTIVES: The authors reported successful experience of combining the utilization of silicone-polytetrafluoroethylene composite implants with onlay temporal fascial grafts to circumvent these complications. METHODS: Sixty-four patients of Asian ethnicity underwent augmentation rhinoplasty utilizing an I-shaped composite implant with an onlay fascial graft from January 2015 to June 2018, with a mean follow-up period of 13.5 months. This patient group was compared with a control group of 177 Asian patients who underwent augmentation rhinoplasty utilizing the same composite implant but without the addition of a fascial graft; the control group was treated from February 2012 to June 2015, with a mean follow-up of 42.0 months. Complications were compared between these 2 patient groups, specifically focusing on malposition/deviations, erythema, and infections. RESULTS: There was a marked decrease in complication rates with the addition of an onlay temporal fascial graft to cover the composite implant in augmentation rhinoplasty (7.8% vs 14.7%) as well as the rate of erythematous reactions (0% vs 6.2%, P = 0.04), infection (1.6% vs 1.1%), and implant malposition/deviation (0% vs 4.5%). Harvesting the temporal fascia and fashioning the onlay graft added an additional 33 minutes on average per procedure. No donor site morbidity was encountered. CONCLUSIONS: Although the operative time increased, the benefits of adding onlay fascial grafts to silicone-polytetrafluoroethylene implants in alloplastic augmentation rhinoplasty outweigh the drawbacks, as evidenced by the decrease in erythematous reactions.

Facile preparation of magnetic molecularly imprinted polymers for the selective extraction and determination of dexamethasone in skincare cosmetics using HPLC.

Dexamethasone-imprinted polymers were fabricated by reversible addition-fragmentation chain transfer polymerization on the surface of magnetic nanoparticles under mild polymerization conditions, which exhibited a narrow polydispersity and high selectivity for dexamethasone extraction. The dexamethasone-imprinted polymers were characterized by scanning electron microscopy, transmission electron microscope, Fourier transform infrared spectroscopy, X-ray diffraction, energy dispersive spectrometry, and vibrating sample magnetometry. The adsorption performance was evaluated by static adsorption, kinetic adsorption and selectivity tests. The results confirmed the successful construction of an imprinted polymer layer on the surface of the magnetic nanoparticles, which benefits the characteristics of high adsorption capacity, fast mass transfer, specific molecular recognition, and simple magnetic separation. Combined with high-performance liquid chromatography, molecularly imprinted polymers as magnetic extraction sorbents were used for the rapid and selective extraction and determination of dexamethasone in skincare cosmetic samples, with the accuracies of the spiked samples ranging from 93.8 to 97.6%. The relative standard deviations were less than 2.7%. The limit of detection and limit of quantification were 0.05 and 0.20 µg/mL, respectively. The developed method was simple, fast and highly selective and could be a promising method for dexamethasone monitoring in cosmetic products.

Facile preparation of polydopamine-coated imprinted polymers on the surface of SiO2 for estrone capture in milk samples.

Estrone molecularly imprinted polymers were synthesized through the self-polymerization of dopamine on the surface of silica gels, which had the characteristics of mild polymerization conditions, simple reaction procedure and good specific recognition ability for estrone. The estrone molecularly imprinted polymers were characterized by scanning electron microscopy, Fourier transform infrared spectroscopy, thermogravimetric analysis, elemental analysis and nitrogen adsorption-desorption tests. The characterization confirmed that the imprinted polymers were successfully grafted on the surface of silica gels. Through investigating the adsorption performance, the prepared estrone molecularly imprinted polymers exhibited high adsorption capacity, fast mass transfer, as well as excellent selectivity toward estrone. The estrone molecularly imprinted polymers as the solid-phase extraction adsorbent coupled with high-performance liquid chromatography was developed to determine estrone from the milk samples. The developed estrone molecularly imprinted polymer solid-phase extraction with high-performance liquid chromatography method exhibited satisfactory specificity, precision, accuracy and good linearity relationship in the range of 0.2-20 µg/mL. The developed method is simple, fast, effective and high specificity method and it provides a new method to detect the residues of estrone in animal foods.