Physicochemical properties and osteogenic activity of radiopaque calcium silicate-gelatin cements.

The purpose of this study is to evaluate the physicochemical properties and in vitro osteogenic activity of radiopaque calcium silicate-gelatin cements. The radiopacity, setting time, working time, flow, diametral tensile strength, pH value, washout resistance and morphology of the cements with gelatin (0, 5 and 10% by weight) were measured, which compared to a popular endodontic material, ProRoot white-colored mineral trioxide aggregate (WMTA). The cell morphology, cell attachment and proliferation, alkaline phosphatase and osteocalcin levels on the cements were measured by culturing the specimens with dental pulp cells. The results indicated that the presence of gelatin significantly (P < 0.05) reduced radiopacity and diametral tensile strength and prolonged setting time. Nevertheless, the 5 wt% gelatin cement had a radiopacity (5.1 mm of Al thickness) higher than ISO 6876:2001 standards (3 mm of Al thickness). The setting time (33 min), working time (9 min) and flow value (17.4 mm) of the 5 wt% gelatin cement were significantly (P < 0.05) better than those of WMTA (corresponding 165, 6 min and 14.2 mm). The fresh WMTA completely degraded after soaking in a physiological solution for 1 h, while the gelatin cements resisted washout, showing no noticeable breakdown even after 1 day of soaking. The gelatin cement enhanced the higher expression of cell attachment, proliferation and differentiation as compared to WMTA. It was concluded that the 5 wt% gelatin-calcium silicate hybrid cement appears to be promising as a radiopaque biomaterial for medical applications such as endodontics and vertebroplasty.

Biopolymer coated gold nanocrystals prepared using the green chemistry approach and their shape-dependent catalytic and surface-enhanced Raman scattering properties.

This study deals with the preparation of multi-shaped nanoscale gold crystals under synthetically simple, green, and efficient conditions using a seed-mediated growth approach in the presence of hyaluronic acid (HA). These highly biocompatible multi-shaped gold nanocrystals were examined to evaluate their catalytic and surface enhanced Raman scattering (SERS) properties. The results show that the size and shape of the nanocrystals are mainly correlated to the amount of seed, seed size, HA concentration, and reaction temperature. Gold seeds accelerate the reduction of the gold precursor to form gold nanocrystals using HA. The HA serves as a reducing agent and a growth template for the reduction of Au(III) and nanocrystal stabilization. The multi-shaped gold nanocrystals showed superior catalytic properties and higher SERS performance. The simple, green approach efficiently controls the nanocrystals and creates many opportunities for future applications.

Electroosmotic flow control in microfluidic chips using a self-assembled monolayer as the insulator of a flow field-effect transistor.

A novel concept for electroosmotic flow (EOF) control in a microfluidic chip is presented by using a self-assembled monolayer as the insulator of a flow field-effect transistor. Bidirectional EOF control with mobility values of 3.4 × 10(-4) and -3.1 × 10(-4) cm(2)/V s can be attained, corresponding to the applied gate voltage at -0.8 and 0.8 V, respectively, without the addition of buffer additives. A relatively high control factor (approximately 400 × 10(-6) cm(2)/V(2) s) can be obtained. The method presented in this study offers a simple strategy to control the EOF.

Entrapment and measurement of a biologically functionalized microbead with a microwell electrode.

A chip with integrated electrophoretic and electrochemical systems was developed to manipulate either an individual microbead or a cell inside a microwell electrode (MWE) for electrochemical measurement. The optimal MWE geometry (30 microm diameter and 25 microm depth) was designed to accommodate the micro particles according to the simulated results. A chip device was sequentially built from a slide patterned with Pt electrodes, an adhesive tape defined with a flow channel (200 microm in width and 25 microm in height), and an indium tin oxide (ITO) cover. The MWE not only generated an active electrophoretic force to trap the particle but also provided a low flow velocity area (LFVA) to stabilize the trapped bead or cell in a continuous flow. Scanning electrochemical microscopy (SECM) theory was employed to explain the electrochemical behaviors of the MWE. An enhanced current was confirmed as the redox recycling effect on the conductive ITO cover. The catalytic reaction of an individual alkaline phosphatase coated microbead (ALP-bead) was electrochemically detected with the MWE after being trapped. The ALP on the trapped ALP-bead catalyzed the hydrolysis of p-aminophenylphosphate (PAPP) to p-aminophenol (PAP), and then a decaying amperogram (+0.3 V vs. Ag/AgCl) due to a tiny PAP quantity around the MWE was observed.

A continuous high-throughput bioparticle sorter based on 3D traveling-wave dielectrophoresis.

We present a high throughput (maximum flow rate approximately 10 microl/min or linear velocity approximately 3 mm/s) continuous bio-particle sorter based on 3D traveling-wave dielectrophoresis (twDEP) at an optimum AC frequency of 500 kHz. The high throughput sorting is achieved with a sustained twDEP particle force normal to the continuous through-flow, which is applied over the entire chip by a single 3D electrode array. The design allows continuous fractionation of micron-sized particles into different downstream sub-channels based on differences in their twDEP mobility on both sides of the cross-over. Conventional DEP is integrated upstream to focus the particles into a single levitated queue to allow twDEP sorting by mobility difference and to minimize sedimentation and field-induced lysis. The 3D electrode array design minimizes the offsetting effect of nDEP (negative DEP with particle force towards regions with weak fields) on twDEP such that both forces increase monotonically with voltage to further increase the throughput. Effective focusing and separation of red blood cells from debris-filled heterogeneous samples are demonstrated, as well as size-based separation of poly-dispersed liposome suspensions into two distinct bands at 2.3 to 4.6 microm and 1.5 to 2.7 microm, at the highest throughput recorded in hand-held chips of 6 microl/min.

Characterization of the elastic and viscoelastic properties of dentin by a nanoindentation creep test.

Dentin is the main supporting structure of teeth, but its mechanical properties may be adversely affected by pathological demineralization. The purposes of this study were to develop a quantitative approach to characterize the viscoelastic properties of dentin after de- and re-mineralization, and to examine the elastic properties using a nanoindentation creep test. Dentin specimens were prepared to receive both micro- and nano-indentation tests at wet and dry states. These tests were repeatedly performed after demineralization (1% citric acid for 3 days) and remineralization (artificial saliva immersion for 28 days). The nanoindentation test was executed in a creep mode, and the resulting displacement-time responses were disintegrated into primary (transient) and secondary (viscous) creep. The structural changes and mineral densities of dentin were also examined under SEM and microCT, respectively. The results showed that demineralization removed superficial minerals of dentin to the depth of 400 µm, and affected its micro- and nano-hardness, especially in the hydrate state. Remineralization only repaired the minerals at the surface layer, and partially recovered the nanohardness. Both the primary the secondary creep increased in the demineralized dentin, while the hydration further enhanced creep deformation of untreated and remineralized dentin. Remineralization reduced the primary creep of dentin, but did not effectively increase the viscosity. In conclusion, water plasticization increases the transient and viscous creep strains of demineralized dentin and reduces load sustainability. The nanoindentation creep test is capable of analyzing the elastic and viscoelastic properties of dentin, and reveals crucial information about creep responses.

Monitoring perspiration from palms of hypohidrosis patients with a stopped-flow conductometric mini-system.

BACKGROUND: Sensitive and real-time methods are required to characterize the symptoms and resolve the complicated pathology of hypohidrosis. METHOD: We constructed a conductometric humidity sensor and a stopped-flow manifold with suitable dynamic range for monitoring impaired perspiration. The mini-sensor was coated with a water-absorbing polymer of poly-(2-acrylamido-2-methylpropane sulfonate). RESULTS: Perspiration from palms of normal individuals and hypohidrosis patients were monitored and compared. Tangent slopes of the sensorograms were capable of discriminating hypohidrosis patients from normal individuals. CONCLUSION: The conductometric min-sensor and the stopped-flow manifold were proven to be useful as a diagnostic tool for hypohidrosis.

Composition-dependent protein secretion and integrin level of osteoblastic cell on calcium silicate cements.

The purpose of this study was to investigate the responses of the human osteosarcoma cell line MG63 to calcium silicate cements with different Si/Ca molar ratios and different surface roughness. In particular, the study evaluated integrin subunit levels, phosphor-focal adhesion kinase (pFAK) levels and protein production at the cell attachment stage. The results indicated that the surface roughness (variations within a factor of 10) of the cements did not play a prominent role in cell attachment and proliferation, but the effect of composition was highlighted. Increased pFAK and total integrin levels and promoted cell attachment and cell cycle progression were observed upon an increase in cement Si content. Cement with a higher Si content was beneficial for collagen Type I (COL I) adsorption, COL I secretion, and αlibß3 subintegrin expression, whereas cement with a higher Ca content increased fibronectin (FN) adsorption, FN secretion, and enhanced αvß1 subintegrin levels. These results establish composition-dependent differences in integrin binding as a mechanism regulating cellular responses to biomaterial surfaces.

TiO2 nanowire FET device: encapsulation of biomolecules by electro polymerized pyrrole propylic acid.

Silane-based methods have become the standards for the conjugation of biomolecules, especially for the preparation of one-dimensional nanomaterial biosensors. However, the specific binding of those target molecules might raise problems with regard to the sensing and non-sensing regions, which may contaminate the sensing devices and decrease their sensitivity. This paper attempts to explore the encapsulation of biomolecules on a one-dimensional nanomaterial field effect transistor (FET) biosensor using polypyrrole propylic acid (PPa). Specifically, the encapsulation of biomolecules via the electropolymerization of pyrrole propylic acid (Pa), a self-made low-conductivity polymer, on TiO(2)-nanowire (NW)-based FETs is presented. The energy dispersive spectrum (EDS) was obtained and electrical analysis was conducted to investigate PPa entrapping anti-rabbit IgG (PPa/1°Ab) on a composite film. The specificity, selectivity and sensitivity of the sensor were analyzed in order to determine the immunoreaction of PPa/1°Ab immobilized NW biosensors. Our results show that PPa/1°Ab achieved high specificity immobilization on NWs under the EDS analysis. Furthermore, the TiO(2)-NW FET immunosensor developed in this work successfully achieved specificity, selectivity and sensitivity detection for the target protein rabbit IgG at the nano-gram level. The combination of PPa material and the electropolymerization method may provide an alternative method to immobilize biomolecules on a specific surface, such as NWs.