RESUMO
STATEMENT OF PROBLEM: The introduction of computer-aided design and computer-aided manufacturing (CAD-CAM) technology for complete denture fabrication may have improved clinical outcomes compared with conventional techniques. However, systematic reviews comparing these techniques are lacking. PURPOSE: The purpose of this systematic review was to identify, compare, and synthesize the outcomes of published clinical studies related to complete denture fabrication, with respect to the differences between CAD-CAM technology and conventional techniques. MATERIAL AND METHODS: A comprehensive search of studies published up to March 16, 2020, was conducted by using the PubMed/MEDLINE, Web of Science, Cochrane Library, SciELO, and Embase databases according to the Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) statement criteria and was registered in the International Prospective Register of Systematic Reviews (PROSPERO ID 42020202614). The population, intervention, comparison, and outcome (PICO) question was: Do CAD-CAM complete dentures have a similar functional performance to those fabricated by conventional techniques? The quality of publications was appraised by using the Critical Appraisal Skills Program (CASP) checklists. RESULTS: Of the 1232 titles, 6 articles were selected. The studies reported better retention of digitally manufactured complete dentures without denture adhesives than that of conventional complete dentures with or without denture adhesives. Other studies reported that dentures manufactured with digital systems were better adapted to tissue surfaces, required less clinical time, were lower in cost, and provided better experience and satisfaction to patients. CONCLUSIONS: The assessment of CAD-CAM planning and manufacturing through clinical studies is ongoing. However, preliminary results indicate better clinical performance and lower overall costs of digital complete dentures than conventional dentures.
Assuntos
Planejamento de Dentadura , Prótese Total , Humanos , Planejamento de Dentadura/métodos , Desenho Assistido por Computador , TecnologiaRESUMO
STATEMENT OF PROBLEM: A consensus that establishes the indications and clinical performance of removable partial denture (RPD) frameworks designed and manufactured with computer-aided design and computer-aided manufacturing (CAD-CAM) systems is lacking. PURPOSE: The purpose of this systematic review and meta-analysis was to evaluate the currently published literature investigating different CAD-CAM methods and techniques for RPD manufacturing and their clinical performance. MATERIAL AND METHODS: A comprehensive search of studies published up to September 2019 was performed in PubMed/MEDLINE, Web of Science, Cochrane Library, and SciELO databases according to the Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA Statement) criteria and was registered and approved in the International Prospective Register of Systematic Reviews (PROSPERO: CRD42020152197). The population, intervention, comparison, outcome (PICO) question was "Do the CAD-CAM frameworks have similar performances to those fabricated by conventional techniques?" The meta-analysis included clinical and in vitro studies based on the effect size and test of Null (2-Tail) with 95% confidence interval (CI). Clinical and in vitro studies were selected and analyzed separately. RESULTS: A total of 15 articles out of 358 were selected. For clinical studies, quantitative analysis with a sample of 25 participants showed a mean discrepancy between occlusal rests and rest seats of 184.91 µm (95% CI: 152.6 µm-217.15 µm) and heterogeneity (I2) of 0%. Clinical data considered that frameworks were acceptable for continuity of treatment. The predominant materials were cobalt-chromium (Co-Cr) and polyetheretherketone (PEEK), and studies using Co-Cr reported that the structure required adjustments. In addition, it has been reported that the indirect technique was time-consuming and selective laser melting (SLM) can be costly. PEEK structures have been more widely accepted because of improved esthetics. Quantitative data from the in vitro studies revealed that the additive manufacturing technique (2.006 mm: 95% CI: -2.021 mm to 6.032 mm) was not significantly different from the indirect technique (0.026 mm; P=.455; random: I2: 98.402%). CONCLUSIONS: Clinical studies and in vitro research on CAD-CAM planning and manufacturing of removable prosthesis frameworks are still sparse. However, preliminary data indicate a similar fit and esthetic improvement when compared with the conventional technique.
Assuntos
Prótese Parcial Removível , Benzofenonas , Cromo , Cobalto , Desenho Assistido por Computador , Computadores , Estética Dentária , Humanos , Polímeros , TecnologiaRESUMO
OBJECTIVE: To systematically evaluate the effect of microwave disinfection on the dimensional stability of denture base acrylic resins. BACKGROUND: Microwave disinfection has been considered as an alternative method for disinfecting complete dentures to help prevent and treat denture stomatitis. However, data on the impact of microwave disinfection on the dimensional stability of acrylic resins are still scarce. METHODS: The PubMed/Medline, SCOPUS and EMBASE databases were searched in order to assess articles published in English up to January 2021 (CRD42021212267). We included studies that have assessed the effect of microwave disinfection, on the dimensional stability of acrylic resins, comparing them with negative or positive controls. RESULTS: A total of seven in vitro studies were included. The qualitative synthesis demonstrated that, in general, microwave disinfection produced more distortion on the materials than do immersion in sodium hypochlorite, chloride solution, chlorhexidine, and water immersion. However, considering the dimensional stability of the specimens, microwave disinfection at 500 W for 3 minutes, and at 450 W for 5 minutes, produced similar or better outcomes than did control groups. CONCLUSION: In general, microwave disinfection promotes changes in the dimensional stability of denture base acrylic resins, and should thus be used with caution. However, microwave disinfection protocols at lower power settings (500 and 450 W) and exposure times (3 and 5 minutes) produces similar or less distortion than chemical disinfection. More studies are still required in order to evaluate the clinical and long-term implications of microwave disinfection.
Assuntos
Resinas Acrílicas , Bases de Dentadura , Humanos , Desinfecção/métodos , Teste de Materiais , Micro-Ondas/uso terapêuticoRESUMO
AIM: The aim of this study was to evaluate the stress distribution of a planned removable partial denture (RPD) using new proposals for calibrated gauges of 0.3 mm and 0.35 mm undercuts through the three-dimensional (3D) finite element methodology, and compare them with 0.25 mm and 0.5 mm gauges that are already existing in clinical practice. MATERIALS AND METHODS: Kennedy class-I edentulous 3D models and their respective RPDs (InVesalius software; Rhinoceros and SolidWorks CAD) were created and exported to the finite element program HyperMesh 2019 for mesh configuration. In the following steps, axial loading (0º) of 40 N per point was performed, with 3 points on the molars and 2 points on the premolars, totaling 280 N unilaterally. The model was processed by the OptiStruct 2019 software and imported into the HyperView 2019 software to obtain the stress maps (MPa). RESULTS: The use of 0.30 and 0.35 mm calibrated gauges presented tensions similar to those with the 0.25 mm gauge (gold standard) and caused no significant damage to biological structures. The use of a 0.5 mm undercut caused greater traction force in the periodontal ligament of the abutments. CONCLUSIONS: The 0.35 mm undercut seems promising as it presented more favorable results in this simulation, on the other hand, a 0.5 mm undercut is greater than that necessary for retainers made of CoCr. CLINICAL SIGNIFICANCE: This study aims to measure a new undercut gauge (0.35 mm) to increase the retention area in abutment teeth of removable partial dentures.
Assuntos
Prótese Parcial Removível , Análise de Elementos Finitos , Planejamento de Dentadura , Ligamento Periodontal , Dente Pré-Molar , Retenção de Dentadura , Dente SuporteRESUMO
PURPOSE: To analyze the effect of disinfectants on the roughness and mechanical properties of CAD/ CAM polymethylmethacrylate (PMMA) dentures. MATERIALS AND METHODS: Two groups of denture base resins were tested-heat-polymerized and milled blocks. For each resin, 120 specimens were produced for flexural strength (FS) and flexural modulus (FM) analyses (total: 240 specimens), and 40 were produced for microhardness and surface roughness evaluations (total: 80 specimens). They were categorized into the following groups based on immersion: control (deionized water); H1 (1% sodium hypochlorite); H05 (0.5% sodium hypochlorite); and C2 (2% chlorhexidine) groups. The immersion periods were 0 (T0), 130 (T1), and 260 (T2) cycles. Statistical analyses were performed for flexural properties using threeway ANOVA. Microhardness (KHN) and surface roughness (Ra) were analyzed using repeated-measures ANOVA. A significance level of 5% was set. RESULTS: CAD/CAM PMMA showed higher FS (P = .001) and FM (P < .001) than conventional PMMA. The KHN value was superior to the conventional PMMA (P < .001). The chemical solution affected the surface roughness of both resins (P = .007). The CAD/ CAM PMMA block showed increased Ra values when H1 was used. Cycling separately increased the FS of conventional PMMA (T1 vs baseline; P < .05). However, the FM of CAD/CAM PMMA was higher (T1 and T2 vs baseline; P < .05). The time factor increased the microhardness of both resins (T2 vs baseline; P < .05). CONCLUSIONS: The CAD/CAM resin showed higher values compared to conventional PMMA in all tests, regardless of the chemical solution used; however, the values obtained for both resins were clinically acceptable.
Assuntos
Desenho Assistido por Computador , Resistência à Flexão , Teste de Materiais , Polimetil Metacrilato , Propriedades de Superfície , Polimetil Metacrilato/química , Dureza , Bases de Dentadura , Desinfecção/métodos , Clorexidina/química , Hipoclorito de Sódio/químicaRESUMO
Currently, there is no consensus on the indications and clinical performance of implant-supported overdentures (IODs) involving computer-aided design and manufacturing (CAD-CAM) bars. OBJECTIVE: To evaluate the performance of IODs involving CAD-CAM bars. METHODOLOGY: A comprehensive search of studies published until May 2023 was conducted in many databases, including PubMed/MEDLINE, Web of Science, Cochrane Library, and SciELO, following the Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA). The population, intervention, comparison, outcome (PICO) question was: "How do IODs retained by bars fabricated by CAD-CAM technology perform in daily clinical practice?" The meta-analysis included clinical studies based on effect size and a two-tailed null test with a 95% confidence interval (CI). RESULTS: Ten studies were included in the meta-analysis. Among them, nine reported a 100% implant survival rate for all CAD-CAM milled bars. Complications were reported in two studies with CAD/CAM-milled titanium bars, and one study reported more fractures in soldered gold bars used in maxillary rehabilitation. However, no fractures were observed in IODs retained by PEEK and zirconia bars. According to six studies, biological complications, including peri-implantitis, were minimal in the BioHPP and PEEK bar groups, while no cases were reported in the titanium or zirconia bar groups. CAD-CAM-milled zirconia bars had higher plaque and bleeding indices compared with titanium bars, as evidenced by findings from five studies. All four studies that evaluated Oral Health Impact Profile (OHIP) scores showed a positive effect of IODs retained by CAD-CAM milled titanium bars on quality of life. Patient satisfaction and acceptance by prosthodontists were significantly high, according to the results of five studies. CONCLUSION: Overdentures retained with CAD-CAM milled titanium bars show great potential for use in daily clinical practice. Moreover, patient and practitioner satisfaction was very high when this method was used.
Assuntos
Revestimento de Dentadura , Qualidade de Vida , Humanos , Titânio , Desenho Assistido por ComputadorRESUMO
The characteristics of the denture base surface, in combination with the oral environment, promote the colonization and development of Candida albicans biofilm, which is the main cause of denture stomatitis. This study evaluated the effectiveness of fibrin biopolymer with digluconate chlorhexidine or Punica granatum alcoholic extract to prevent C. albicans biofilm. Conventional heat polymerized and pre-polymerized poly(methyl methacrylate) (PMMA) circular specimens (10 × 2 mm) were fabricated (n = 504) and randomly divided into groups: no treatment (control-CT), fibrin biopolymer coating (FB), fibrin biopolymer with P. granatum (FBPg), or digluconate of chlorhexidine (FBCh) coating. The specimens were inoculated with C. albicans SC5314 (1 × 107 cells/mL) and incubated for 24, 48, and 72 h. Crystal violet and colony-forming unit assays were used to quantify the total biofilm biomass and biofilm-living cells. A qualitative analysis was performed using confocal laser scanning microscopy. Data obtained are expressed as means and standard deviations and were statistically analyzed using a three-way analysis of variance (α = 0.05). The FBPg and FBCh groups inhibited the growth of C. albicans biofilm in both PMMA materials analyzed, with FBCh performing better in all periods evaluated (p < 0.0001). The colony forming unit (CFU) assay showed that the FB group favored the C. albicans biofilm growth at 24 h and 48 h (p < 0.0001), with no differences with CT group at 72 h (p = 0.790). All groups showed an enhancement in biofilm development up to 72 h (p < 0.0001), except the FBCh group (p = 0.100). No statistical differences were found between the PMMA base materials (p > 0.050), except in the FB group (p < 0.0001). Fibrin biopolymer, albeit a scaffold for the growth of C. albicans, when combined with chlorhexidine digluconate or P. granatum, demonstrated excellent performance as a drug delivery system, preventing and controlling the formation of denture biofilm.