Surfactant-free poly(lactide-co-glycolide) honeycomb films for tissue engineering: relating solvent, monomer ratio and humidity to scaffold structure.

One-step surfactant-free, water-droplet templating has been developed as a fabrication method for a poly(lactide-co-glycolide) (PLGA) film that can be used as a model to investigate the relationship between solvent, monomer ratio, polymer concentration and humidity on its structure. The resulting material is a honeycomb-structured film. Formation of this structure was highly sensitive to solvent, monomer ratio, polymer concentration and humidity. Surfactant-free, water-droplet templating thus allows investigation of fabrication parameters and that PLGA monomer ratio selection is important for scaffold structure but not for MG63 cell attachment and proliferation.

Post-culture treatment protocols for PLGA membrane scaffolds.

The interactions of post-culture treatments reagents used for fixing, lysing and cell quantification on poly(lactide-co-glycolide) (PLGA) flat sheet membrane scaffolds are presented. Lysing with Alkaline buffer solution/Triton X-100/MilliQ water (ATM) and fixing with 10% Neutral Buffered Formalin (10% NBF) had no affect on membrane structure while fixing with 95% ethanol caused smoothing of the surface, shrinkage and a reduction in surface area of 55, 48 and 33, for 100:0, 75:25 and 50:50 (PLA:PGA), respectively. PicoGreen assay was selected for cell (560pZIPv.neo) quantification since the background noise would not affect readings for cell numbers over 3,000 cells/cm(2), while the background reading was too high for MTT and Methylene Blue (MB). MB at 0.5% (w/v) was, however, deemed suitable for visualising cell morphology on the membranes. Furthermore ATM buffer was suitable for the PicoGreen assay, which allows the same samples to be used for quantification of alkaline phosphatase activity.

Human bone derived cell culture on PLGA flat sheet membranes of different lactide:glycolide ratio.

Providing a scaffold that can supply nutrients on a large scale (several cubic centimeters) is the key to successfully regenerating vascularized tissue: biodegradable membranes are a promising new scaffold suited to this purpose. Poly(lactic-co-glycolic-acid) (PLGA) flat sheet membranes of different lactide:glycolide ratios, prepared by phase inversion using 1-methyl-2-pyrrolidinone (NMP) as the solvent and water as the nonsolvent, were compared by assessing attachment, proliferation and osteogenic function of human bone derived cells (HBDC). Three different lactide:glycolide ratios, 50:50, 75:25, and 100:0, were compared to tissue culture polystyrene (TCPS). For attachment, 50:50 and 75:25 had similar numbers to TCPS but 100:0 had significantly fewer cells than TCPS. 50:50 and 75:25 had significantly lower HBDC numbers after 7 days but 100:0 had similar numbers compared to TCPS. For proliferation the cell number on the membranes were similar to each other. After 3 weeks, osteoblastic function of the HBDC, shown by mineralization and alkaline phosphatase activity, was present but was significantly lower compared to the TCPS control but similar when the membranes were compared. PLGA membranes fabricated from a range of ratios support HBDC culture so the optimum scaffold composition can be selected based on other factors, such as degradation rate.

Expansion of human bone marrow stromal cells on poly-(DL-lactide-co-glycolide) (PDL LGA) hollow fibres designed for use in skeletal tissue engineering.

Strategies to expand human bone marrow stromal cells (HBMSC) for bone tissue engineering are a key to revolutionising the processes involved in three-dimensional skeletal tissue reconstruction. To facilitate this process we believe the use of biodegradable porous poly(DL-lactide-co-glycolide) (PDL LGA) hollow fibres as a scaffold used in combination with HBMSC to initiate natural bone repair and regeneration offers a potential solution. In this study, the biocompatibility of 75:25 PDL LGA fibres with HBMSC and the capacity of a PDL LGA fibre-associated HBMSC-monolayer to establish an osteogenic phenotype in vivo was examined. A high proportion of HBMSC survived when expanded on PDL LGA fibres for 6 days, with only 10% of the propidium iodide (pI)-labelled population represented in the sub-G1 DNA peak on analysis by flow cytometry. Tracking carboxy-fluorescein diacetate, succinimidyl ester (CFSE)-labelled HBMSC by flow cytometry indicated that HBMSC attachment to the P(DL)LGA fibres does not interfere with their rate of proliferation. Furthermore, in response to osteogenic stimuli, HBMSC expanded on PDL LGA fibres can differentiate, as expected, along the osteogenic lineage with associated alkaline phosphatase activity. Following implantation into SCID mice, osteogenic-conditioned PDL LGA fibre-HBMSC graft resulted in type I collagen deposition and associated bone mineralisation and osteoid formation, as evidenced by immunohistochemistry and histology. These studies provide evidence that porous PDL LGA hollow fibre-HBMSC graft is an innovative biomaterial that offers new approaches to mesenchymal cell expansion, which could be utilised as a scaffold for skeletal tissue generation.

Effects of common sterilization methods on the structure and properties of poly(D,L lactic-co-glycolic acid) scaffolds.

While methods for the production of scaffolds with the appropriate mechanical properties and architecture for tissue engineering are attracting much attention, the effects of subsequent sterilization processes on the scaffold properties have often been overlooked. This study sought to determine the effects of sterilization with ethanol, peracetic acid, ultraviolet irradiation, and antibiotic solution on the structure of 50:50 (mol:mol) 65:35, and 85:15 poly(D,L-lactic-co-glycolic acid [PLGA]) flat-sheet and hollow-fiber scaffolds. All methods resulted in scaffold sterilization, but scanning electron microscopy revealed deformations to the scaffold surface for all treatments. The extent of surface damage increased with treatment duration. This was further investigated by measurement of pore sizes, water flux, breaking strain, and Young's modulus. External pore size and water flux was found to be increased by all treatments in the following order: ethanol (largest), antibiotics, ultraviolet light, and peracetic acid. Pore sizes were 0.25 to 0.17 microm and water flux ranged from 0.01 kg x m(-2) x s(-1) to 3.34 kg x m(-2) x s(-1). For all samples, the Young's modulus was 1.0 to 31.1 MPa and breaking strain was 1.2 to 2.4 MPa. The results of this study suggest that antibiotic treatment shows the most potential to sterilize PLGA hollow fibers for tissue engineering.

Strategies to promote chondrogenesis and osteogenesis from human bone marrow cells and articular chondrocytes encapsulated in polysaccharide templates.

The aim of this study was to synthesize functional in vitro and in vivo 3-dimensional (3D) constructs using a mix of human mesenchymal populations and articular chondrocytes encapsulated in biomineralized polysaccharide templates. Single-cell-type populations or mixtures of both cell types were encapsulated in alginate/chitosan and cultured within a rotating-bioreactor, perfused bioreactor system, or static conditions for 28 days. Within single cell-type populations, type II collagen immunopositive cells were present within lacunae in rotating-bioreactor capsules, with an increased proportion of metabolically active cells compared with perfused and static constructs. Biochemical analysis indicated significantly increased ( p < 0.05) DNA and protein in rotating-bioreactor conditions compared with perfused or static. However, in coculture samples, DNA and protein was significantly increased in static cultures owing to the formation of large regions of partially mineralized osteoid. This osteoid was found only in static cultures and when the ratio of human bone marrow cells to chondrocytes was 2:1 or, to a lesser extent, 5:1 ratio capsules. Subcutaneous implantation of capsules into immunocompromised mice also showed optimal osteoid formation when the ratio was 2:1. The current studies demonstrate the pivotal role of robust 3D biomimetic microenvironments and indicate the potential to harness the interactions between different cell types to create specific tissues.

Preparation of porcine carotid arteries for vascular tissue engineering applications.

Biomaterials derived from tissue continue to offer viable alternatives to synthetic materials when autologous materials are unavailable for transplantation due to their unique chemical and mechanical properties. Tissue processing aims to stabilize the material against host degradation and render it immunologically inert by removing cellular material and crosslinking the structural proteins. It is clear that different approaches taken to achieve these goals have very different chemical and mechanical effects on the material. We describe herein the development of a tissue processing methodology to generate acellular scaffolds for tissue engineering small-diameter vascular grafts. Carotid arteries were isolated from Great White pigs and exposed to various solvent treatments, xylene, butanol, and ethanol to determine optimal parameters for the extraction of host lipids. The tissue was then exposed to a limited proteolysis with trypsin to disrupt cellular protein. This resulted in a controlled digestion that disrupted porcine nuclear DNA and cleared bulk cellular protein, leaving the more resistant structural proteins largely intact and retaining the bulk mechanical properties of the matrix. Histological analysis and scanning electron microscopy illustrated the complete removal of intact cells and nuclear material. The decellularized graft was stabilized by crosslinking with the photooxidative dye methylene green in the presence of 30,000 LUX of broad-band light energy. High-performance liquid chromatography analysis showed that the crosslinked tissue yielded 78.6% less hydroxyproline, compared with control tissue, after 20 h incubation with pepsin. Analysis of the crosslinked vessels' burst-pressure and stress-strain characteristics have shown comparable mechanical properties to those of control vessels. Assessment of in vitro cell adhesion and compatibility was conducted by seeding primary human umbilical vein endothelial cells and adult human vascular smooth muscle cells onto the lumenal and ablumenal surfaces, respectively; these cells were shown to adhere and proliferate under traditional static culture conditions.

Effect of column dimensions and flow rates on size-exclusion refolding of beta-lactamase.

We have investigated the effect of changing the column diameter and length on the size exclusion chromatography (SEC) refolding of beta-lactamase from Escherichia coli-derived inclusion bodies (IBs). Inclusion bodies were recovered and solubilised in 6 M GdnHCl and 5 mM DTT. Up to 16 mg of denatured, solubilised beta-lactamase was loaded onto size exclusion columns packed with Sephacryl S-300 media (fractionation range: 10(4)-1.5 x 10(6) Da). beta-Lactamase was refolded by eluting the loaded sample with 1 M urea in 0.05 M phosphate buffer, pH 7 at 23 degrees C. The following columns were studied: 26 x 400, 16 x 400 and 26 x 200 mm, with a range of mobile phase flow rates from 0.33 to 4.00 ml/min. beta-Lactamase was successfully refolded in all three columns and at all flow rates studied. The beta-lactamase activity peak coincided with the major protein peak. Reducing the column diameter had little effect on refolding performance. The enzyme activity recovered was relatively independent of the mobile phase linear velocity. Reducing the column length gave a poorer resolution of the protein peaks, but the enzyme activity peaks were well resolved. Calculation of the partition coefficients for beta-lactamase activity showed that the 26 x 400 column gave the greatest refolding performance.

Formation of a human-derived fat tissue layer in P(DL)LGA hollow fibre scaffolds for adipocyte tissue engineering.

Development of adipose tissue-engineering strategies, where human bone marrow stromal cells (HBMSC) are combined with three-dimensional scaffolds, is likely to prove valuable for soft tissue restoration. In this study, we assessed the function of poly(DL-lactide-co-glycolide) (P(DL)LGA) hollow fibres in facilitating the development of HBMSC-derived adipocytes for advancement of an associated adipocyte layer. The large surface area of 75:25 P(DL)LGA fibres facilitated the rapid generation of extensive adipocyte aggregates from an undifferentiated HBMSC monolayer, where the fat-laden cells stained positive with Oil Red O and expressed the adipocyte marker, fatty acid binding protein 3 (FABP3). Following implantation subcutaneously in severely compromised immunodeficient mice, the adipogenic phenotype of the PLGA-adipocyte graft was maintained for up to 56 days. Confocal microscopy showed associated LipidTOX Deep Red neutral lipid staining in an (FL)P(DL)LGA fibre-adipocyte graft after 56 days, critical evidence demonstrating maintenance of the adipocyte phenotype in the subcutaneous graft. To support adipose tissue advancement in a defined volume, the P(DL)LGA-adipocyte scaffold was encapsulated within alginate/chitosan hydrogel capsules (typical diameters, 4.0 mm). In a 28-day in vivo trial in immunodeficient mice, clusters of the capsules were maintained at the subcutaneous site. An adipocyte tissue layer advancing within the surrounding hydrogel was demonstrated.

Poly(lactic-co-glycolic acid) hollow fibre membranes for use as a tissue engineering scaffold.

Mass transfer limitations of scaffolds are currently hindering the development of 3-dimensional, clinically viable, tissue engineered constructs. We have developed a poly(lactide-co-glycolide) (PLGA) hollow fibre membrane scaffold that will provide support for cell culture, allow psuedovascularisation in vitro and provide channels for angiogenesis in vivo. We produced P(DL)LGA flat sheet membranes using 1, 4-dioxane and 1-methyl-2-pyrrolidinone (NMP) as solvents and water as the nonsolvent, and hollow fibre membranes, using NMP and water, by dry/wet- and wet-spinning. The resulting fibres had an outer diameter of 700 micro m and an inner diameter of 250 micro m with 0.2-1.0 micro m pores on the culture surface. It was shown that varying the air gap and temperature when spinning changed the morphology of the fibres. The introduction of a 50 mm air gap caused a dense skin of 5 micro m thick to form, compared to a skin of 0.5 micro m thick without an air gap. Spinning at 40 degrees C produced fibres with a more open central section in the wall that contained more, larger macrovoids compared to fibres spun at 20 degrees C. Culture of the immortalised osteogenic cell line 560pZIPv.neo (pZIP) was carried out on the P(DL)LGA flat sheets in static culture and in a P(DL)LGA hollow fibre bioreactor under counter-current flow conditions. Attachment and proliferation was statistically similar to tissue culture polystyrene on the flat sheets and was also successful in the hollow fibre bioreactor. The P(DL)LGA hollow fibres are a promising scaffold to address the size limitations currently seen in tissue engineered constructs.

Porcine collagen crosslinking, degradation and its capability for fibroblast adhesion and proliferation.

Porcine dermal collagen permanently crosslinked with hexamethylene diisocyanate was investigated for its suitability as a dermal tissue engineering matrix. It was found that the chemically crosslinked collagen had far fewer free lysine groups per collagen molecule than did the uncrosslinked matrix. The ability of the matrix to support human primary fibroblast outgrowth from explants was compared for matrices that had been presoaked in various solutions, including fibroblast media, cysteine and phosphate buffered saline (PBS). It was found that superior cell outgrowth was obtained after soaking with fibroblast media and PBS. The fibroblast attachment properties of the matrix were compared against tissue culture plastic and PET. The collagen matrix showed the least amount of cell retention compared to the other to matrices, however, the general trends were similar for all three scaffolds. Longer term cultures on the collagen showed fibroblasts covering the matrix stacking up on each other and bridging natural hair follicles. However, it was also observed that the fibroblasts were not able to penetrate into the matrix structure. This was believed to result from the chemical crosslinking, as shown by the resistance of the matrix to degradation by collagenases.