Microbiota profiles in the saliva, cancerous tissues and its companion paracancerous tissues among Chinese patients with lung cancer.

BACKGROUND: Despite the growing interest in the impact of the gut microbiome on cancer, the relationship between the lung microbiome and lung cancer has received limited investigation. Additionally, the composition of the oral microbiome was found to differ from that of individuals with lung cancer, indicating that these microorganisms may serve as potential biomarkers for the detection of lung cancer. METHODS: Forty-three Chinese lung cancer patients were enrolled in the current retrospective study and 16 S rRNA sequencing was performed on saliva, cancerous tissue (CT) and paracancerous tissue (PT) samples. RESULTS: Diversity and species richness were significantly different between the oral and lung microbiota. Lung microbiota were largely composed of the phyla Proteobacteria, Firmicutes, Bacteroidetes and Actinobacteria. The relative abundance of Promicromonosporacea and Chloroflexi increased in CT, while Enterococcaceae and Enterococcus were enriched in PT (p<0.05). A cancer-related microbiota model was constructed and produced an area under the curve of 0.74 in the training set, indicating discrimination between subjects with and without cancer. CONCLUSIONS: Characterization of microbiota in saliva, CT and PT from Chinese lung cancer patients revealed little difference between CT and PT, indicating that the tumor and its microenvironment might influence the local microbiome. A model to distinguish between CT and PT was constructed, which has the potential to enhance our comprehension of the involvement of microbiota in the pathogenesis of lung cancer and identify novel therapeutic targets.

Molecular Origin of the Biologically Accelerated Mineralization of Hydroxyapatite on Bacterial Cellulose for More Robust Nanocomposites.

Biomineralization generates hierarchically structured minerals with vital biological functions in organisms. This strategy has been adopted to construct complex architectures to achieve similar functionalities, mostly under chemical environments mimicking biological components. The molecular origin of the biofacilitated mineralization process is elusive. Herein, we describe the mineralization of hydroxyapatite (HAp) accompanying the biological secretion of nanocellulose by Acetobacter xylinum. In comparison with mature cellulose, the newly biosynthesized cellulose molecules greatly accelerate the nucleation rate and facilitate the uniform distribution of HAp crystals, thereby generating composites with a higher Young modulus. Both simulations and experiments indicate that the biological metabolism condition allows the easier capture of calcium ions by the more abundant hydroxyl groups on the glucan chain before the formation of hydrogen bonding, for the subsequent growth of HAp crystals. Our work provides more insights into the biologically accelerated mineralization process and presents a different methodology for the generation of biomimetic nanocomposites.

Shape-programmable magneto-active elastomer composites for curve and biomimetic behavior imitation.

A programming methodology, which can be applied to soft-magnetic-material-based magneto-active elastomers (MAEs), to catch the predefined specific objective curves is proposed in this study. The objective curves have been equally separated into a couple of segments, which will be filled by the designed MAE elements. Furthermore, the designed MAE segments with different chain angles, in which the deformation orientation of each element under applied homogeneous magnetic fields has been investigated based on the designed experimental setup, are arrayed based on the proposed programming methodology to constitute the MAE composite to catch the orientation of the objective curve. The experimental results show that based on the proposed programming methodology, the MAE composites can describe different curves, which include harmonic, tangential and arc tangential functions under applied homogeneous magnetic fields with good agreement. Furthermore, on the basis of the proposed programming methodology, the MAE composites are utilized to mimic the typical biomimetic behavior (the peeking-up behavior of snakes and the flapping behavior of birds) with smooth curvature properties, in which the dynamic procedures present continuous curves.

Multibuilding Block Janus Synthesized by Seed-Mediated Self-Assembly for Enhanced Photothermal Effects and Colored Brownian Motion in an Optical Trap.

The asymmetrical features and unique properties of multibuilding block Janus nanostructures (JNSs) provide superior functions for biomedical applications. However, their production process is very challenging. This problem has hampered the progress of JNS research and the exploration of their applications. In this study, an asymmetrical multibuilding block gold/iron oxide JNS has been generated to enhance photothermal effects and display colored Brownian motion in an optical trap. JNS is formed by seed-mediated self-assembly of nanoparticle-loaded thermocleavable micelles, where the hydrophobic backbones of the polymer are disrupted at high temperatures, resulting in secondary self-assembly and structural rearrangement. The JNS significantly enhances photothermal effects compared to their homogeneous counterpart after near-infrared (NIR) light irradiation. The asymmetrical distribution of gold and iron oxide within JNS also generates uneven thermophoretic force to display active colored Brownian rotational motion in a single-beam gradient optical trap. These properties indicate that the asymmetrical JNS could be employed as a strong photothermal therapy mediator and a fuel-free nanoscale Janus motor under NIR light.

Noninvasive fluorescence resonance energy transfer imaging of in vivo premature drug release from polymeric nanoparticles.

Understanding in vivo drug release kinetics is critical for the development of nanoparticle-based delivery systems. In this study, we developed a fluorescence resonance energy transfer (FRET) imaging approach to noninvasively monitor in vitro and in vivo cargo release from polymeric nanoparticles. The FRET donor dye (DiO or DiD) and acceptor dye (DiI or DiR) were individually encapsulated into poly(ethylene oxide)-b-polystyrene (PEO-PS) nanoparticles. When DiO (donor) nanoparticles and DiI (acceptor) nanoparticles were coincubated with cancer cells for 2 h, increased FRET signals were observed from cell membranes, suggesting rapid release of DiO and DiI to cell membranes. Similarly, increased FRET ratios were detected in nude mice after intravenous coadministration of DiD (donor) nanoparticles and DiR (acceptor) nanoparticles. In contrast, another group of nude mice i.v. administrated with DiD/DiR coloaded nanoparticles showed decreased FRET ratios. Based on the difference in FRET ratios between the two groups, in vivo DiD/DiR release half-life from PEO-PS nanoparticles was determined to be 9.2 min. In addition, it was observed that the presence of cell membranes facilitated burst release of lipophilic cargos while incorporation of oleic acid-coated iron oxide into PEO-PS nanoparticles slowed the release of DiD/DiR to cell membranes. The developed in vitro and in vivo FRET imaging techniques can be used to screening stable nanoformulations for lipophilic drug delivery.

'Living' PEGylation on gold nanoparticles to optimize cancer cell uptake by controlling targeting ligand and charge densities.

We report and demonstrate biomedical applications of a new technique--'living' PEGylation--that allows control of the density and composition of heterobifunctional PEG (HS-PEG-R; thiol-terminated poly(ethylene glycol)) on gold nanoparticles (AuNPs). We first establish 'living' PEGylation by incubating HS-PEG5000-COOH with AuNPs (∼20 nm) at increasing molar ratios from zero to 2000. This causes the hydrodynamic layer thickness to differentially increase up to 26 nm. The controlled, gradual increase in PEG-COOH density is revealed after centrifugation, based on the ability to re-suspend the pellet and increase the AuNP absorption. Using a fluorescamine-based assay we quantify differential HS-PEG5000-NH2 binding to AuNPs, revealing that it is highly efficient until AuNP saturation is reached. Furthermore, the zeta potential incrementally changes from -44.9 to +52.2 mV and becomes constant upon saturation. Using 'living' PEGylation we prepare AuNPs with different ratios of HS-PEG-RGD (RGD: Arg-Gly-Asp) and incubate them with U-87 MG (malignant glioblastoma) and non-target cells, demonstrating that targeting ligand density is critical to maximizing the efficiency of targeting of AuNPs to cancer cells. We also sequentially control the HS-PEG-R density to develop multifunctional nanoparticles, conjugating positively charged HS-PEG-NH2 at increasing ratios to AuNPs containing negatively charged HS-PEG-COOH to reduce uptake by macrophage cells. This ability to minimize non-specific binding/uptake by healthy cells could further improve targeted nanoparticle efficacy.

Electricity production performance enhancement of microbial fuel cells with double-layer sodium alginate hydrogel bioanodes driven by high-salinity waste leachate.

The poor bacterial loading capacity and biocompatibility of the anode lead to weak electricity production performance of microbial fuel cells (MFCs). Inspired by kelp, we developed a double-layer hydrogel bioanode based on sodium alginate (SA). The inner hydrogel layer of encapsulated Fe3O4 and electroactive microorganisms (EAMs) was used as the bioelectrochemical catalytic layer. The outer hydrogel layer formed by cross-linking SA with polyvinyl alcohol (PVA) was used as the protective layer. The 3D porous structure of the inner hydrogel formed based on Fe3O4 facilitated the electroactive bacteria colonization and electron transfer, while the high structural toughness, salt-resistance and antibacterial properties of the outer highly cross-linked hydrogel served to protect the catalytic layer for stable electricity production. When high-salt waste leachate was used as the nutrient, the amazing open-circuit voltage (OCV) of 1.17 V and the operating voltage of 781 mV were brought by the double-layer hydrogel bioanode PVA@SA&Fe3O4/EAMs@SA.

Precursor structure-determined fluorescence labeling for mesenchymal stem cells among four polyethylenimine-based carbon quantum dots.

A series of polyethylenimine (PEI)-based CQDs have been synthesized via a hydrothermal method by mixing linear PEI with linear citric acid (CA with COOH groups, PEICA), linear glucose (G with OH groups, PEIG), cyclic hyaluronic acid (HA with COOH groups, PEIHA) and cyclic boron nitride (BN with OH groups, PEIBN). PEICA had the best labeling effect (100.00 ± 0.26%) and the lowest cytotoxicity (100.89 ± 18.00%) for mesenchymal stem cells (MSCs), followed by PEIG (91.83 ± 7.60%; 92.84 ± 5.56%), PEIHA (84.34 ± 7.87%; 61.27 ± 11.34%) and PEIBN (1.33 ± 0.84%; 22.72 ± 11.47%). The labeling effect of PEIHA for MSCs is lower than that of PEIG because the surface potential of PEIHA (6.58 mV) is higher than that of PEIG (0.50 mV). For PEIBN, it is likely that the precursor (BN) is less biocompatible than CA, HA and glucose. Thus, the linear acid (CA) is more appropriate to react with PEI for synthesizing CQDs with high labeling performance for MSCs. The control experimental results show that factors (such as surface potential, aromatic component, etc.) may all contribute to MSC labeling by PEICA. This work is helpful to design CQDs with high MSC labeling efficiency.

Surface Stability and Morphology of Calcium Phosphate Tuned by pH Values and Lactic Acid Additives: Theoretical and Experimental Study.

The ubiquitous mineralization of calcium phosphate (CaP) facilitates biological organisms to produce hierarchically structured minerals. The coordination number and strength of Ca2+ ions with phosphate species, oxygen-containing additives, and solvent molecules played a crucial role in tuning nucleation processes and the surface stability of CaP under the simulated body fluid (SBF) or aqueous solutions upon the addition of oligomeric lactic acid (LACn, n = 1, 8) and changing pH values. As revealed by ab initio molecular dynamics (AIMD), density functional theory (DFT), and molecular dynamics (MD) simulations as well as high-throughput experimentation (HTE), the binding of LAC molecules with Ca2+ ions and phosphate species could stabilize both the pre-nucleation clusters and brushite (DCPD, CaHPO4·2H2O) surface through intermolecular electrostatic and hydrogen bonding interactions. When the concentration of Ca2+ ions ([Ca2+]) is very low, the amount of the formed precipitation decreased with the addition of LAC based on UV-vis spectroscopic analysis due to the reduced chance for the LAC capped Ca2+ ions to coordinate with phosphates and the increased solubility in the acid solution. With the increasing [Ca2+] concentration, the kinetically stable DCPD precipitation was obtained with high Ca2+ coordination number and low surface energy. Morphologies of DCPD precipitation are in plate, needle, or rod, depending on the initial pH values that were tuned by adding NH3·H2O, HCl, or CH3COOH. The prepared samples at pH ≈ 7.4 with different Ca/P ratios exhibited negative zeta potential values, which were correlated with the surface electrostatic potential distributions and potential biological applications.

Antibiotic-Loaded MMT/PLL-Based Coating on the Surface of Endosseous Implants to Suppress Bacterial Infections.

BACKGROUND: Bone infections remain one of the most common and serious complications of orthopedic surgery, posing a tremendous economic burden to society and patients. This is because bacteria colonize and multiply on the surface of the implant. The (MMT/PLL)8 multilayer films have been shown to effectively release antibiotics depending on the changes in the microenvironment. Here, vancomycin was loaded into the (MMT/PLL)8 multilayer films, which were prepared to be used as a local delivery system for the treatment of bone infections. METHODS: We used the layer-by-layer self-assembly method to prepare VA-loaded coatings (MMT/PLL-VA)8 consisting of montmorillonite (MMT), poly-L-lysine (PLL), and VA. The thickness and surface morphology of coatings were characterized using spectroscopic ellipsometry and scanning electron microscopy (SEM). In order to evaluate the drug release behavior from coatings in different media, we measured the size of the zone of inhibition. Additionally, in vitro antibacterial activity was assessed using the shake-flask culture method and SEM images, while that of in vivo was evaluated by establishing an animal model of bone infection. RESULTS: Our findings revealed that small-molecule antibiotics were successfully loaded into the (MMT/PLL-VA)8 multilayer film structure during the hierarchical self-assembly process and subsequently the multilayer film structure depicted linear growth behavior. The PLL in the multilayer films was progressively degraded which triggered the VA release when contacted with CMS or bacterial infections. The release of VA from multilayer film structure depends on the concentration changes of CMS. Notably, the multilayer films presented great in vitro cell compatibility. Moreover, the prepared antibacterial multilayer films showed excellent antibacterial property by killing more than 99.99% of S. aureus in 24 h. More importantly, we found that multilayer film exhibits good sterilization effect and biocompatibility under the stimulation of bacterial liquid both in vitro and in vivo antibacterial ability tests. CONCLUSION: Altogether, this study shows that (MMT/PLL-VA)8 multilayer films containing CMS and bacteria-responsive drug release properties posess high bactericidal activity and good biocompatibility. This finding provides a novel strategy for the treatment of bone infections.

Rapid and sensitive determination of four bisphosphonates in rat plasma after MTBSTFA derivatization using liquid chromatography-mass spectrometry.

Bisphosphonates (BPs) have broad medical applications against osteoporosis, bone metastasis and Paget's disease. The BP-related jaw osteonecrosis limits their use extensively and has a causal relationship with the process of drug disposition, such as deposition on bone and slow elimination rate. Thus it is imperative to accurately determine BP levels in either clinical or pharmacological/toxicological studies. The ability of trimethylsilyl diazomethane (TMSD) to alkylate the hydroxyls in phosphoric groups is an advantage in terms of decreasing polarity and enhancing mass response of BPs. There are, however, practical limitations to the cumbersome sample preparation procedure, the prolonged reaction time, the by-products and the obstacle to ionization. To overcome these disadvantages, a simplified and rapid precolumn derivatization method with N-(tert-Butyldimethylsilyl)-N-methyl-trifluoroacetamide (MTBSTFA) to quantify etidronate, clodronate, alendronate and zoledronate BPs in rat plasma was established in this work. The derivatization reaction was conducted within 2 min at room temperature, and the unitary di-tert-butyldimethylsilyl (di-tBDMS) derivative was obtained for each BP. Derivatives were separated on a XTerra® MS C8 column (2.1 × 50 mm, 3.5 µm) with the mobile phase of 5 mM ammonium acetate buffer (pH 8.5) and acetonitrile, then detected using electrospray ionization tandem mass spectrometry in negative mode. An easy extraction process instead of the time-consuming solid-phase extraction (SPE) was employed for plasma treatment. The proposed method showed good linearity for BPs over the range of 2-500 ng/mL in 20 µL plasma and high sensitivity owing to the larger molecular ions, higher ionization capacity and more stable fragments of di-tBDMS derivatives. The intra- and inter-batch precision were <13.1 %, and the accuracy ranged within ±10 %. The extraction recovery varied from 75.4 to 88.0 %. The optimized method was successfully applied to characterize the pharmacokinetic profile of zoledronate in rats. Moreover, it is a promising approach for the determination of other phosphoric acid-containing metabolites.

Transplantation of dental tissue-derived mesenchymal stem cells ameliorates nephritis in lupus mice.

BACKGROUND: Recently, clinical studies have suggested that transplantation of umbilical cord mesenchymal stem cells (UC-MSCs) were able to alleviate clinical symptoms of refractory systemic lupus erythematosus (SLE). Although dental tissue derived MSCs, including dental pulp stem cells (DPSCs) and periodontal ligament stem cell (PDLSCs), have been reported to possess immunomodulatory functions, whether they can ameliorate SLE symptoms as UC-MSCs remains to be elucidated. METHODS: We assessed the abilities of DPSCs and PDLSCs to treat SLE, cells were transferred intravenously to 28-week old B6/lpr mice. Ten weeks later, mice were sacrificed. Serum anti-dsDNA antibodies and anti-nuclear antibodies (ANA) were measured by ELISA. Renal pathology was analyzed by H&E, PAS and MASSON staining. Aggregation of IgG and IgM in the glomerulus was examined by immunofluorescence. Frequencies of Th1, Th2, Treg, Th17, Tfh, and plasma cells were determined by surface and intracellular staining. Serum IL-6, IL-10, IL-17 and MCP-1 were measured by Milliplex® MAP technology. RESULTS: Same as UC-MSCs, both DPSCs and PDLSCs could efficiently downregulate 24-h proteinuria, anti-dsDNA antibodies and glomerular IgG/IgM in B6/lpr mice. However, DPSCs but not PDLSCs could ameliorate the glomerular lesion in B6/lpr mice. Compared to the phosphate buffered saline (PBS) group, percentages of Th1 (CD4+IFNγ+) cells and plasma (B220-CD138+) cells in the spleen were significantly decreased in DPSCs and PDLSCs groups. There was no significant difference in Th2 (CD4+IL4+), Th17 (CD4+IL17+), Tfh (CD4+PD-1+CXCR5+) and Treg (CD4+CD25+Foxp3+) cells. Serum IL-6, IL-10, IL-17 and MCP-1 levels didn't change after MSCs transplantation. CONCLUSIONS: Our results show that both DPSCs and PDLSCs can alleviate the disease symptoms of lupus-prone B6/lpr mice. DPSCs are also effective in reducing kidney glomerular lesion and perivascular inflammation infiltration as well as UC-MSCs, suggesting that DPSCs might be another choice for SLE treatment.

Self-Assembled Au@Fe Core/Satellite Magnetic Nanoparticles for Versatile Biomolecule Functionalization.

Although the functionalization of magnetic nanoparticles (MNPs) with biomolecules has been widely explored for various biological applications, achieving efficient bioconjugations with a wide range of biomolecules through a single, universal, and versatile platform remains a challenge, which may significantly impact their applications' outcomes. Here, we report a novel MNP platform composed of Au@Fe core/satellite nanoparticles (CSNPs) for versatile and efficient bioconjugations. The engineering of the CSNPs is facilely formed through the self-assembly of ultrasmall gold nanoparticles (AuNPs, 2-3 nm in diameter) around MNPs with a polysiloxane-containing polymer coating. The formation of the hybrid magnetic nanostructure is revealed by absorption spectroscopy, dynamic light scattering (DLS), transmission electron microscopy (TEM), element analysis using atomic absorption spectroscopy, and vibrating sample magnetometer. The versatility of biomolecule loading to the CSNP is revealed through the bioconjugation of a wide range of relevant biomolecules, including streptavidin, antibodies, peptides, and oligonucleotides. Characterizations including DLS, TEM, lateral flow strip assay, fluorescence assay, giant magnetoresistive nanosensor array, high-performance liquid chromatography, and absorption spectrum are performed to further confirm the efficiency of various bioconjugations to the CSNP. In conclusion, this study demonstrates that the CSNP is a novel MNP-based platform that offers versatile and efficient surface functionalization with various biomolecules.

Facile Fabrication of Near-Infrared-Resonant and Magnetic Resonance Imaging-Capable Nanomediators for Photothermal Therapy.

Although many techniques exist for fabricating near-infrared (NIR)-resonant and magnetic resonance imaging (MRI)-capable nanomediators for photothermal cancer therapy, preparing them in an efficient and scalable process remains a significant challenge. In this report, we exploit one-step siloxane chemistry to facilely conjugate NIR-absorbing satellites onto a well-developed polysiloxane-containing polymer-coated iron oxide nanoparticle (IONP) core to generate dual functional core-satellite nanomediators for photothermal therapy. An advantage of this nanocomposite design is the variety of potential satellites that can be simply attached to impart NIR resonance, which we demonstrate using NIR-resonant gold sulfide nanoparticles (Au2SNPs) and the NIR dye IR820 as two example satellites. The core-satellite nanomediators are fully characterized by using absorption spectra, dynamic light scattering, ζ potential measurements, and transmission electron microscopy. The enhanced photothermal effect under the irradiation of NIR laser light is identified through in vitro solutions and in vivo mice studies. The MRI capabilities as contrast agents are demonstrated in mice. Our data suggest that polysiloxane-containing polymer-coated IONPs can be used as a versatile platform to build such dual functional nanomediators for translatable, MRI-guided photothermal cancer therapy.

[A three dimensional finite element analysis on en-masse retraction of maxillary anterior teeth by rocking-chair archwire in sliding mechanics].

OBJECTIVE: To investigate the effect of en-masse retraction of maxillary anterior teeth by rocking-chair archwire (RCA) in sliding mechanics. METHODS: The three dimensional finite element model of maxillary teeth was created based on spiral CT data of a patient by ANSYS software. The forces on each tooth and the torques on the six center of resistance (CR) of the anterior teeth induced by the deformation of RCA with different depth and anterior retraction hook (ARH) with different height were calculated when retracted from a mini-implant between the first molar and the second premolar. The movements of anterior teeth were observed combining different depth of RCA with different height of ARH. RESULTS: The clockwise torque in sliding mechanics to realize en-masse retraction of the anterior teeth could be counterbalanced by RCA of certain depth. The combination of 7.2 mm ARH and 2 mm RCA can be used to intrude and retract maxillary anterior teeth under the condition of applying mini-implant. CONCLUSION: The excessive retraction that usually exists in traditional treatments can be avoided by RCA in sliding mechanics and intrusion and torque control during anterior segment retraction can also be achieved by this method.

Ultrafine sulfur nanoparticles in conducting polymer shell as cathode materials for high performance lithium/sulfur batteries.

We report the synthesis of ultrafine S nanoparticles with diameter 10 ~ 20 nm via a membrane-assisted precipitation technique. The S nanoparticles were then coated with conducting poly (3,4-ethylenedioxythiophene) (PEDOT) to form S/PEDOT core/shell nanoparticles. The ultrasmall size of S nanoparticles facilitates the electrical conduction and improves sulfur utilization. The encapsulation of conducting PEDOT shell restricts the polysulfides diffusion, alleviates self-discharging and the shuttle effect, and thus enhances the cycling stability. The resulting S/PEDOT core/shell nanoparticles show initial discharge capacity of 1117 mAh g(-1) and a stable capacity of 930 mAh g(-1) after 50 cycles.

Anti-HER2 antibody and ScFvEGFR-conjugated antifouling magnetic iron oxide nanoparticles for targeting and magnetic resonance imaging of breast cancer.

Antifouling magnetic iron oxide nanoparticles (IONPs) coated with block copolymer poly(ethylene oxide)-block-poly(γ-methacryloxypropyltrimethoxysilane) (PEO-b-PγMPS) were investigated for improving cell targeting by reducing nonspecific uptake. Conjugation of a HER2 antibody, Herceptin®, or a single chain fragment (ScFv) of antibody against epidermal growth factor receptor (ScFvEGFR) to PEO-b-PγMPS-coated IONPs resulted in HER2-targeted or EGFR-targeted IONPs (anti-HER2-IONPs or ScFvEGFR-IONPs). The anti-HER2-IONPs bound specifically to SK-BR-3, a HER2-overexpressing breast cancer cell line, but not to MDA-MB-231, a HER2-underexpressing cell line. On the other hand, the ScFvEGFR-IONPs showed strong reactivity with MDA-MB-231, an EGFR-positive human breast cancer cell line, but not with MDA-MB-453, an EGFR-negative human breast cancer cell line. Transmission electron microscopy revealed internalization of the receptor-targeted nanoparticles by the targeted cancer cells. In addition, both antibody-conjugated and non-antibody-conjugated IONPs showed reduced nonspecific uptake by RAW264.7 mouse macrophages in vitro. The developed IONPs showed a long blood circulation time (serum half-life 11.6 hours) in mice and low accumulation in both the liver and spleen. At 24 hours after systemic administration of ScFvEGFR-IONPs into mice bearing EGFR-positive breast cancer 4T1 mouse mammary tumors, magnetic resonance imaging revealed signal reduction in the tumor as a result of the accumulation of the targeted IONPs.

Nitrification performance and microbial ecology of nitrifying bacteria in a full-scale membrane bioreactor treating TFT-LCD wastewater.

This study investigated nitrification performance and nitrifying community in one full-scale membrane bioreactor (MBR) treating TFT-LCD wastewater. For the A/O MBR system treating monoethanolamine (MEA) and dimethyl sulfoxide (DMSO), no nitrification was observed, due presumably to high organic loading, high colloidal COD, low DO, and low hydraulic retention time (HRT) conditions. By including additional A/O or O/A tanks, the A/O/A/O MBR and the O/A/O MBR were able to perform successful nitrification. The real-time PCR results for quantification of nitrifying populations showed a high correlation to nitrification performance, and can be a good indicator of stable nitrification. Terminal restriction fragment length polymorphism (T-RFLP) results of functional gene, amoA, suggest that Nitrosomonas oligotropha-like AOB seemed to be important to a good nitrification in the MBR system. In the MBR system, Nitrobacter- and Nitrospira-like NOB were both abundant, but the low nitrite environment is likely to promote the growth of Nitrospira-like NOB.

Reducing non-specific binding and uptake of nanoparticles and improving cell targeting with an antifouling PEO-b-PgammaMPS copolymer coating.

One of the major limitations impeding the sensitivity and specificity of biomarker targeted nanoparticles is non-specific binding by biomolecules and uptake by the reticuloendothelial system (RES). We report the development of an antibiofouling polysiloxane containing amphiphilic diblock copolymer, poly(ethylene oxide)-block-poly(gamma-methacryloxypropyl trimethoxysilane) (PEO-b-PgammaMPS), for coating and functionalizing high quality hydrophobic nanocrystals such as iron oxide nanoparticles and quantum dots. These PEO-b-PgammaMPS-coated nanocrystals were colloidally stable in biological medium and showed low non-specific binding by macromolecules after incubation with 100% fetal bovine serum. Both in vitro experiments with macrophages and in vivo biodistribution studies in mice revealed that PEO-b-PgammaMPS copolymer-coated nanocrystals have an antibiofouling effect that reduces non-specific cell and RES uptake. Surface functionalization with amine groups was accomplished through co-crosslinking the polysiloxane coating layer and (3-Aminopropyl)trimethoxysilane in aqueous solution. Tumor integrin alpha(v)beta(3) targeting peptide cyclo-RGD ligands were conjugated on the nanoparticles through a heterobifunctional linker. The resulting integrin alpha(v)beta(3) targeting nanoparticle conjugates showed improved cancer cell targeting with a stronger affinity to U87MG glioma cells, which have a high expression of alpha(v)beta(3) integrins, but minimal binding to MCF-7 breast cancer cells with low expression of alpha(v)beta(3) integrins.

Biocompatible polysiloxane-containing diblock copolymer PEO-b-PgammaMPS for coating magnetic nanoparticles.

We report a biocompatible polysiloxane containing amphiphilic diblock copolymer, poly(ethylene oxide)-block-poly(gamma-methacryloxypropyltrimethoxysilane) (PEO-b-PgammaMPS), for coating and stabilizing nanoparticles for biomedical applications. Such an amphiphilic diblock copolymer that comprises both a hydrophobic segment with "surface anchoring moiety" (silane group) and a hydrophilic segment with PEO (M(n) = 5000 g/mol) was obtained by the reversible addition-fragmentation chain transfer (RAFT) polymerization using the PEO macromolecular chain transfer agent. When used for coating paramagnetic iron oxide nanoparticles (IONPs), copolymers were mixed with hydrophobic oleic acid coated core size uniformed IONPs (D = 13 nm) in cosolvent tetrahydrofuran. After being aged over a period of time, resulting monodispersed IONPs can be transferred into aqueous medium. With proper PgammaMPS block length (M(n) = 10 000 g/mol), polysiloxane containing diblock copolymers formed a thin layer of coating (approximately 3 nm) around monocrystalline nanoparticles as measured by transmission electron microscopy (TEM). Magnetic resonance imaging (MRI) experiments showed excellent T(2) weighted contrast effect from coated IONPs with a transverse relaxivity r(2) = 98.6 mM(-1) s(-1) (at 1.5 T). Such thin coating layer has little effect on the relaxivity when compared to that of IONPs coated with conventional amphiphilic copolymer. Polysiloxane containing diblock copolymer coated IONPs are stable without aggregation or binding to proteins in serum when incubated for 24 h in culture medium containing 10% serum. Furthermore, a much lower level of intracellular uptake by macrophage cells was observed with polysiloxane containing diblock copolymers coated IONPs, suggesting the reduction of nonspecific cell uptakes and antibiofouling effect.