Multiple fluorescence polymer dots-based differential array sensors for highly efficient heavy metal ions detection.

Water pollution caused by harmful heavy metal ions (HMIs) can significantly impact aquatic ecosystems and pose a high risk to human health. In this work, equipped with ultra-high fluorescence brightness, efficient energy transfer, and environmentally friendly performance, polymer dots (Pdots) were employed to construct a pattern recognition fluorescent HMIs detection platform. A single-channel unary Pdots differential sensing array was first developed to identify multiple HMIs with 100% classification accuracy. Then an "all-in-one" multiple Förster resonance energy transfer (FRET) Pdots differential sensing platform was constructed to discriminate HMIs in the artificial polluted water samples and actual water samples, exhibiting high classification accuracy in distinguishing HMIs. The proposed strategy leverages the compounded cumulative differential variation of diverse sensing channels for analytes, which is anticipated to find extensive applications in other fields for detection purposes.

Subjective and objective analysis of orthodontic expert consensus on the assessment of orthodontic treatment outcomes.

OBJECTIVE: The objective of the study was to explore and validate the consensus of orthodontic experts on the assessment of orthodontic treatment outcomes based on subjective and objective analysis. MATERIALS AND METHODS: The research consisted of two parts: the exploration and verification of expert consensus. First, a sample of 108 cases randomly selected from six dental schools in China were evaluated by 69 orthodontic experts and measured by researchers based on post-treatment study casts and lateral cephalograms, respectively. Then, through statistical analysis, the objective indicators significantly correlated with experts' subjective evaluations were selected, their weights were determined, and the critical values of satisfactory, acceptable and unacceptable grades were screened. Subsequently, another sample of 72 cases were evaluated by another 36 orthodontic experts, and the subjective evaluation results were compared with the objective measurement results. RESULTS: There were six model indicators and seven cephalometric indicators being significantly correlated with the experts' subjective evaluations, including occlusal contact, overjet, midline, interproximal contact, alignment, occlusal relationship, L1/NB, ANB, SN/OP, U1/SN, LL-EP, Cm-Sn-UL and Ns-Prn-Pos, with a cumulative R2 of 0.704. In the verification part, the correlation coefficient between the 36 experts' subjective scores and objective regression scores was 0.716 (P < .001); the correlation coefficient between the 36 experts' subjective grades and objective grades was 0.757 (P < .001). CONCLUSIONS: Orthodontic experts had good consistency in the subjective evaluation of the combined records of post-treatment study casts and lateral cephalograms. The objective indicators selected from subjective and objective analysis had good reliability and validity and could further improve the existing occlusal indices.

Orthodontic treatment of substituting third molars for missing permanent molars.

INTRODUCTION: This study aimed to evaluate the orthodontic effect and efficiency of substituting third molars for missing first or second permanent molars systematically. METHODS: Forty-six patients (69 third molars total) with missing permanent molars replaced by third molars were selected. The angulation, crown-to-root ratio, and periodontal condition of the third molars before and after treatment were compared. The American Board of Orthodontics Objective Grading System was used to evaluate the alignment and occlusion of third molars after treatment. The duration of orthodontic treatment and third molar replacement therapy were also recorded. RESULTS: The average orthodontic treatment time was 33.9 ± 5.6 months, and the average angulation change of third molars during treatment was 49.8 ± 29.8°. The average height of mesial alveolar bone increased by 4.8 ± 0.5 mm in patients whose third molars were mesially inclined or horizontally impacted. The root length of adult patients decreased by 0.72 ± 0.02 mm on average, and the average gingival recession was 0.10 mm, both of which were not statistically significant. The average score for each third molar evaluated by the American Board of Orthodontics Objective Grading System was 1.8 ± 0.5 points. CONCLUSIONS: If the indications and timing of treatment were well-controlled, third molars would be excellent substitutes for missing first or second permanent molars through the orthodontic method.

Natural reference structures for three-dimensional maxillary regional superimposition in growing patients.

BACKGROUND: Assessment of growth-related or treatment-related changes in the maxilla requires a reliable method of superimposition. Such methods are well established for two-dimensional (2D) cephalometric images but not yet for three-dimensions (3D). The aims of this study were to identify natural reference structures (NRS) for the maxilla in growing patients in 3D, opportunistically using orthodontic mini-screws as reference; and to test the applicability of the proposed NRS for maxillary superimposition by assessing the concordance of this approach with Björk's 'stable reference structures' in lateral projection. METHODS: The stability of the mini-screws was tested on longitudinal pairs of pre- and post-orthodontic cone-beam computed tomography (CBCT) images by measuring the distance changes between screws. After verifying the stability of the mini-screws, rigid registration was performed for aligning the stable mini-screws. Then, non-rigid registration was used to establish the dense voxel-correspondence among CBCT images and calculate the displacement of each voxel belonging to the maxilla relative to the mini-screws. The displacement vectors were transformed to a standardized maxillary template to categorize the stability of the internal structures statistically. Those voxels that displaced less relative to the mini-screws were considered as the natural reference structures (NRS) for the maxilla. Test samples included another dataset of longitudinal CBCT scans. They were used to evaluate the applicability of the proposed NRS for maxillary superimposition. We assessed whether aligning the maxilla with proposed NRS is in concordance with the maxillary internal reference structures superimposition in the traditional 2D lateral view as suggested by Björk. This was quantitively assessed by comparing the mean sagittal and vertical tooth movements for both superimposition methods. RESULTS: The stability of the mini-screws was tested on 10 pairs of pre- and post-orthodontic cone-beam computed tomography (CBCT) images (T1: 12.9 ± 0.8 yrs, T2: 14.8 ± 0.7 yrs). Both the loaded and the unloaded mini-screws were shown to be stable during orthodontic treatment, which indicates that they can be used as reference points. By analyzing the deformation map of the maxilla, we confirmed that the infraorbital rims, maxilla around the piriform foramen, the infrazygomatic crest and the hard palate (palatal vault more than  1 cm distal to incisor foramen except the palatal suture) were stable during growth. Another dataset of longitudinal CBCT scans (T1: 12.2 ± 0.63 yrs, T2: 15.2 ± 0.96 yrs) was used to assess the concordance of this approach with Björk's 'stable reference structures'. The movement of the maxillary first molar and central incisor showed no statistically significant difference when superimposing the test images with the proposed NRS or with the classic Björk maxillary superimposition in the lateral view. CONCLUSIONS: The infraorbital rims, maxilla around the piriform foramen, the infrazygomatic crest and the hard palate (palatal vault more than 1 cm posterior to incisal foramen except the palatal suture) were identified as stable regions in the maxilla. These stable structures can be used for maxillary superimposition in 3D and generate comparable results to Björk superimposition in the lateral view.

Engineering of Portable Smartphone Integrated with Liposome-Encapsulated Curcumin for Onsite Visual Ratiometric Fluorescence Imaging of Hypochlorite.

Precisely onsite monitoring of hypochlorite (ClO- ) is of great significance to guide its rational use, reducing/avoiding its potential threat toward food safety and human health. Considering ClO- could quench fluorescence of curcumin (CCM) by oxidizing the o-methoxyphenol of CCM into benzoquinone, a portable ratiometric fluorescence sensor integrated with smartphone was designed for realizing the visual point-of-care testing (POCT) of ClO- . The amphiphilic phospholipid polymer was used as carrier to wrap curcumin, forming a novel liposome-encapsulated CCM, which provided a scaffold to bind with [Ru(bpy)3 ]2+ through electrostatic interaction, thus assembling [Ru(bpy)3 ]2+ -functionalized liposome-encapsulated CCM ([Ru(bpy)3 ]2+ @CCM-NPs). Further integrated with smartphone, visual imaging of [Ru(bpy)3 ]2+ @CCM-NPs could be achieved and the accurate onsite detection of ClO- could be realized with a detection limit of 66.31 nM and a linear range of 0.2210 to 80.0 µM. In addition, the sensor could monitor ClO- in real samples with an onsite detection time of ∼154.0 s.

Effect of zirconia surface modification using dopamine polymerisation on the shear bond strength of resin cement.

This study evaluated the influence of polydopamine treatment on the surface properties and bond strength of yttria-stabilised tetragonal zirconia polycrystal (Y-TZP). Sixty-three zirconia blocks (10 × 10 × 2 mm) were randomly divided into three groups defined by surface treatment: (i) control group (C), (ii) grit-blasted with 110 µm alumina particles (GB), and (iii) polydopamine (PDA) coating. The surfaces of specimens subjected to different treatments were investigated by X-ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM), and water contact angle measurements. After the surface treatments, the specimens were cemented to resin composite cylinders. After bonding, the shear bond strength of the ceramic to the resin was measured, and the failure mode of each specimen was analysed using a stereomicroscope. The results indicated that the shear bond strength is highest for the GB treatment and lowest for the controls. However, the difference between groups GB and PDA was not statistically significant. In the control group, adhesive failure was predominant, whereas in the treatment groups, mixed mode failure was predominant. The pre-treatment of Y-TZP ceramic with the polydopamine coating might improve the bond strength of the resin cement to the zirconia ceramic.

Purification of inclusion bodies using PEG precipitation under denaturing conditions to produce recombinant therapeutic proteins from Escherichia coli.

It has been documented that the purification of inclusion bodies from Escherichia coli by size exclusion chromatography (SEC) may benefit subsequent refolding and recovery of recombinant proteins. However, loading volume and the high cost of the column limits its application in large-scale manufacturing of biopharmaceutical proteins. We report a novel process using polyethylene glycol (PEG) precipitation under denaturing conditions to replace SEC for rapid purification of inclusion bodies containing recombinant therapeutic proteins. Using recombinant human interleukin 15 (rhIL-15) as an example, inclusion bodies of rhIL-15 were solubilized in 7 M guanidine hydrochloride, and rhIL-15 was precipitated by the addition of PEG 6000. A final concentration of 5% (w/v) PEG 6000 was found to be optimal to precipitate target proteins and enhance recovery and purity. Compared to the previously reported S-200 size exclusion purification method, PEG precipitation was easier to scale up and achieved the same protein yields and quality of the product. PEG precipitation also reduced manufacturing time by about 50 and 95% of material costs. After refolding and further purification, the rhIL-15 product was highly pure and demonstrated a comparable bioactivity with a rhIL-15 reference standard. Our studies demonstrated that PEG precipitation of inclusion bodies under denaturing conditions holds significant potential as a manufacturing process for biopharmaceuticals from E. coli protein expression systems.

Polydopamine-based nanozyme with dual-recognition strategy-driven fluorescence-colorimetric dual-mode platform for Listeria monocytogenes detection.

Development of a simple and efficient dual-mode analytical technique with the built-in cross reference correction feature is benefit to achieve the highly accurate detection of the target pollutants and avoid the false-positive outputs in environmental media. Here, we synthesized a Fe-doped polydopamine (Fe@PDA)-based nanozyme with prominent peroxide-mimetic enzyme activity and high fluorescence emission ability. On this basis, we designed a dual-recognition strategy-driven fluorescence-colorimetric dual-mode detection platform, consisting of Listeria monocytogenes (L. monocytogenes) recognition aptamer-modified Fe@PDA (apt/Fe@PDA) and vancomycin-functionalized Fe3O4 (van/Fe3O4), for L. monocytogenes. Owing to van/Fe3O4-powered magnetic separation, there was a L. monocytogenes concentration-dependent fluorescence enhancement of apt/Fe@PDA for performing fluorescence assay in the precipitate. In this case, the prominent peroxide-mimetic enzyme activity of the residual apt/Fe@PDA in the precipitation could catalyze H2O2 to further oxidate colorless 3,3',5,5'-tetramethylbenzidine (TMB) into blue oxTMB, which displayed a L. monocytogenes concentration-dependent absorbance enhancement for carrying out colorimetric assay as well. As a result, a fluorescence-colorimetric dual-mode analytical platform was proposed to successfully detect the residual L. monocytogenes in real environmental media with acceptable results. This work showed the great prospects by integrating dual-recognition strategy into fluorescence nanozyme to develop efficient and reliable dual-mode analytical platforms for safeguarding environmental health.

Nano-Based Drug Delivery Systems for Periodontal Tissue Regeneration.

Periodontitis is a dysbiotic biofilm-induced and host-mediated inflammatory disease of tooth supporting tissues that leads to progressive destruction of periodontal ligament and alveolar bone, thereby resulting in gingival recession, deep periodontal pockets, tooth mobility and exfoliation, and aesthetically and functionally compromised dentition. Due to the improved biopharmaceutical and pharmacokinetic properties and targeted and controlled drug release, nano-based drug delivery systems have emerged as a promising strategy for the treatment of periodontal defects, allowing for increased efficacy and safety in controlling local inflammation, establishing a regenerative microenvironment, and regaining bone and attachments. This review provides an overview of nano-based drug delivery systems and illustrates their practical applications, future prospects, and limitations in the field of periodontal tissue regeneration.

Monolithic osmotic tablet containing solid dispersion of 10-hydroxycamptothecin.

A novel monolithic osmotic tablet composed of solid dispersion of water-insoluble 10-hydroxycamptothecin (HCPT) was prepared. The tablet core was made of a suspending agent, polyethylene oxide, an osmotic agent, sodium chloride, and a solid dispersion consisting of polyethylene glycol 6000 and HCPT. Optimized formulation was able to deliver HCPT at the constant rate of 1.21 mg/hour for 12 hours with cumulative release above 90% in vitro, independent of environmental media and stirring rate, and the release rate is co-controlled by osmotic pressure, suspending effect, and drug solubility in solid dispersion. The monolithic osmotic tablet containing solid dispersion has great potential in the controlled delivery of water-insoluble drugs.

Transplantation of neural scaffolds consisting of dermal fibroblast-reprogrammed neurons and 3D silk fibrous materials promotes the repair of spinal cord injury.

Transplantation of tissue-engineered neural scaffolds bears great potential for reconstructing neural circuits after spinal cord injury (SCI). In this study, a 3D porous silk fibrous scaffold (3D-SF) with biomimetic interconnected micro- to nanofibrous structure and good biocompatibility is fabricated. Then, a small-molecule combination CFLSSVY (CHIR99021, Forskolin, LDN193189, SB431542, SP600125, VPA, and Y27632) that efficiently reprograms rat dermal fibroblasts into neurons is screened, and these chemically induced neurons (CiNs) are shown to readily communicate on the 3D-SF and form neural scaffolds. After transplantation of these silk-based neural scaffolds into the stumps of transected spinal cords in rats, the damaged tissue is repaired significantly, as indicated by the reduced cavity areas, decreased GFAP expression, and improved axonal regeneration and myelination in the injury site. Moreover, the hindlimb movement and motor-nerve conductivity are greatly improved as indicated by the elevated BBB score, the alternate movement of two hindlimbs during the 45° inclined grid test, and the shortened latency and enhanced amplitude in cMEP detection. Together, these results demonstrate that transplantation of neural scaffolds consisting of 3D-SF and dermal fibroblast-reprogrammed neurons leads to significant nerve regeneration and functional recovery, providing a promising therapeutic strategy for SCI.

Sialoblastoma in chin and management of treatment.

OBJECTIVE: Sialoblastoma is a rare salivary gland tumor mainly located in parotid. In this article, we aimed to review the clinical manifestations and treatments of sialoblastoma, especially to provide effective chemotherapy regimens to instruct internal medicine therapy for unresectable or recurrent tumors. METHOD: We reported a 1-year old girl who presented a left-sided firm facial mass and subsequently diagnosed as sialoblastoma. Afterwards, we reviewed and analyzed relevant literatures. RESULTS: Sixty-four cases of pediatric sialoblastoma were reviewed. Of them, surgical excision was the basic treatment, 17 cases received chemotherapy, and 15 cases got good response. Lung metastasis was reported in six patients, all of whom had good response to chemotherapy. CONCLUSION: Chemotherapy may play an important role in residual, extensive, metastatic and relapsed cases. In addition, lung metastasis was unlikely to exert a significant effect on prognosis.

A Zn(II) coordination polymer and its photocycloaddition product: syntheses, structures, selective luminescence sensing of iron(III) ions and selective absorption of dyes.

One coordination polymer [Zn2(L)2(bpe)2(H2O)2] (1) (L = 4,4'-((1,2-phenylenebis(methylene))bis(oxy))dibenzoic acid; bpe = (E)-1,2-di(pyridin-4-yl)ethene) was prepared and structurally determined. Compound 1 has a chain structure in which its pair of bpe ligands is arranged in a head-to-tail manner with their C=C bonds being close enough for a [2 + 2] cycloaddition reaction. Upon exposure to UV light, compound 1 undergoes a single-crystal-to-single-crystal (SCSC) [2 + 2] photodimerization to generate one 2D coordination polymer [Zn(L)(rctt-tpcb)0.5(H2O)] (1a) (rctt (regio cis, trans, trans)-tpcb = tetrakis(4-pyridyl)cyclobutane). The tpcb ligands in the crystals of 1a show an intriguing in situ thermal isomerisation. The nanospheres of 1 can be obtained by recrystallization in DMSO/alcohol. The nanospheres of 1a can also be readily produced from the corresponding nanospheres of 1 by the photocyclodimerization method. Compared with those of 1a, the nanospheres of 1 display highly selective sensing of Fe(3+) ions over mixed metal ions through fluorescence quenching. Moreover, the nanospheres of 1a can rapidly adsorb CR (congo red), MB (methylene blue) or RhB (rhodamine B) over MO (methyl orange) from aqueous solutions. This work offers a new photoinduced post-synthetic method for the synthesis of multifunctional MOFs, which show luminescence sensing of Fe(3+) ions and dye adsorption properties.