Bioinspired Polydopamine/Polyzwitterion Coatings for Underwater Anti-Oil and -Freezing Surfaces.

Zwitterionic polymers are continually suggested as promising alternatives to tune the surface/interface properties of materials in many fields because of their unique molecular structures. Tremendous efforts have been devoted to immobilizing zwitterionic polymers (polyzwitterions, PZIs) on the material surfaces. However, these efforts usually suffer from cumbersome and time-consuming procedures. Herein we report a one-step strategy to facilely achieve the bioinspired polydopamine/polyzwitterion (PDA/PZI) coatings on various substrates. It requires only 30 min to form PDA/PZI coatings by mixing oxidant, dopamine, and zwitterionic monomers, including carboxybetaine methacrylate (CBMA), sulfobetaine methacrylate (SBMA), and 2-methacryloxyethyl phosphorylcholine (MPC). These bioinspired coatings display multifunctional properties such as underwater antioil-adhesion and antifreezing thanks to their high hydrophilicity and underwater superoleophobicity. The coatings even show the antiadhesion property for crude oil with high viscosity. Therefore, the PDA/PZI-coated meshes are efficient for separating both light oil and crude oil from oil/water mixtures. All these results demonstrate that the one-step strategy is a facile approach to design and exploit the bioinspired PDA/PZI coatings for diverse applications.

Growth and metabolism characteristics of anaerobic ammonium-oxidizing bacteria aggregates.

The present study reported the growth and metabolism characteristics of anaerobic ammonium-oxidizing (anammox) bacteria aggregates in an expanded granular sludge bed (EGSB). The results showed that the anammox bacteria aggregates presented starvation, growth, and inhibition phase along with the increase of substrate supply. The substrate conversion rates for survival were 0.05 kgNH4(+)-N/(kgVSS·day), 0.07 kgNO2(-)-N/(kgVSS·day), and 0.12 kgN/(kgVSS·day); the substrate conversion rates for maximum growth were 0.21 kgNH4(+)-N/(kgVSS·day), 0.24 kgNH4(+)-N/(kgVSS·day), and 0.45 kgNH4(+)-N/(kgVSS·day), respectively. In the growth phase, the yield of anammox bacteria aggregates was 0.14 gVSS/(gNH4(+)-N), 0.12 gVSS/(gNO2(-)-N), and 0.70 gVSS/(gNO3(-)-N); the yield of extracellular polymeric substances (EPS) was 0.11 gEPS/(gNH4(+)-N), 0.09 gEPS/(gNO2(-)-N), and 0.55 gEPS/(gNO3(-)-N), respectively. The EPS contents in anammox bacteria aggregates were high compared to that in anaerobic granular sludge. Speculated from the cell yield, the energy for anammox bacteria growth was not only from nitrite oxidation, but also from anammox reaction.

Plastic responses of fine root morphology and architecture traits to nitrogen addition in ectomycorrhizal and arbuscular mycorrhizal tree species in an evergreen broadleaved forest.

We measured the morphology traits (specific root length, specific root surface area, root tissue density, average root diameter) and architecture traits (root fork, root fork ratio, increase rate of root length, root tip density, root fork density) of fine roots in two mycorrhiza tree species, Castanopsis faberi (ectomycorrhizal) and Schima superba (arbuscular mycorrhizal), in an evergreen broadleaved forest in the middle subtropical zone. Root bags method was used in an in situ nitrogen deposition experiment. The aim of this study was to reveal the differences in the plastic responses of fine root morphology and architecture traits to nitrogen deposition between the different mycorrhizal trees. The plastic responses of specific root length, specific root surface area and root fork to nitrogen addition decreased from the first-order root to the fourth-order root, while root tissue density showed an opposite pattern. Such a result indicated a trade-off between nutrient acquisition and resource maintenance of different fine root orders. Different mycorrhizal tree species adopted diffe-rent adaptation strategies to the variations of soil nitrogen availability. C. faberi adopted an opportuni-stic strategy, which relied on fine root to improve nutrient absorption efficiency, enhanced the capacity of space expansion and in-situ nutrient absorption to focus on rapid nutrient absorption strategy. S. superba did not change fine root morphological traits through the trade-off between nutrient absorption efficiency and root construction cost, but relied more on the complementarity between mycorrhizal fungi and fine root architecture traits for nutrient acquisition. The differences in the cost of maintaining and constructing fine root C between different mycorrhizal trees led to fine root adopting the most suitable nutrient capture strategy.

Biodegradable phosphorylcholine copolymer for cardiovascular stent coating.

Phosphorylcholine (PC) based polymer coatings with excellent biocompatibility have shown successful commercialization in drug-eluting stents. However, poor degradability represents a challenge in the application of biodegradable stents. Herein, a biodegradable phosphorylcholine copolymer is developed based on one-step radical ring-opening polymerization (RROP). This copolymer was synthesized by copolymerization of a PC unit, degradable ester (2-methylene-1,3-dioxepane, MDO) unit and non-degradable butyl methacrylate (BMA) unit, which showed ratio controllability by changing the monomer ratio during polymerization. We demonstrated that the copolymer with the ratio of 34% MDO, 19% MPC and 47% BMA could form a stable coating by ultrasonic spray, and showed good blood compatibility, anti-adhesion properties, biodegradability, and rapamycin eluting capacity. In vivo study revealed its promising application as a biodegradable stent coating. This work provides a facile path to add biodegradability into PC based polymers for further bio-applications.

[Plastic responses of fine root morphological traits of Castanopsis fabri and Castanopsis carlesii to short-term nitrogen addition]. / ç½—æµ®æ ²å’Œç±³æ§ ç»†æ ¹å½¢æ€åŠŸèƒ½æ€§çŠ¶å¯¹çŸ­æœŸæ°®æ·»åŠ çš„å¯å¡‘æ€§å“åº”.

Nitrogen deposition will affect the morphology of fine roots and its absorption of nutrien-ts, resulting in changes nutrient cycling in terrestrial ecosystems. In order to understand the effects of nitrogen deposition on fine root morphological traits of Castanopsis fabri and C. carlesii, two ectomycorrhizas tree species, we carried out in situ experiment using the root bags method in an evergreen broadleaved forest in the subtropical zone. The results showed that the plastic responses of specific root length and specific root surface area of low-order roots (first to third order) to nitrogen addition was higher than that of high-order roots (fourth order). The plastic responses of root tissue density to nitrogen addition increased from the first-order to the fourth-order, while the average root diameter of each order had no significant plastic responses to nitrogen addition. There was a certain synergistic change between the plastic response of specific root length and specific surface area in the low order fine root and the plastic response of tissue density in the high order fine root. The specific root length, specific root surface area and root tissue density of the two species showed opposite plastic responses to nitrogen addition, indicating that different ectomycorrhizal tree species had different nutrient foraging strategies. C. fabri adopted rapid absorption strategy by increasing specific root length, specific root surface area, and proliferation rate of fine root length, while C. carlesii adopted a relatively conservative resource absorption strategy by increasing tissue density of fine roots.

Photothermal-assisted surface-mediated gene delivery for enhancing transfection efficiency.

The development of gene therapy puts forward the requirements for efficient delivery of genetic information into diverse cells. However, in some cases of transfection, especially those for transfecting some primary cells and for delivering large size plasmid DNA (pDNA), the existing conventional transfection methods show poor efficiency. How to further improve transfection efficiency in these hard-to-achieve issues remains a crucial challenge. Here, we report a photothermal-assisted surface-mediated gene delivery based on a polydopamine-polyethylenimine (PDA-PEI) surface. The PDA-PEI surface was prepared through PEI-accelerated dopamine polymerization, which showed efficiency in the immobilization of PEI/pDNA polyplexes and remarkable photothermal properties. Upon IR irradiation, we observed improved transfection efficiencies of two important hard-to-achieve transfection issues, namely the transfection of primary endothelial cells, which are kinds of typical hard-to-transfect cells, and the transfection of cells with large-size pDNA. We demonstrate that the increases of transfection efficiency were due to the hyperthermia-induced pDNA release, the local cell membrane disturbance, and the polyplex internalization. This work highlights the importance of local immobilization and release of pDNA to gene deliveries, showing great potential applications in medical devices in the field of gene therapy.

Overproduction of Bioactive Algal Chrysolaminarin by the Critical Carbon Flux Regulator Phosphoglucomutase.

Chrysolaminarin, the primary polysaccharide reservoir in some marine algae, has attracted much attention due to its broad health properties. However, its biosynthetic pathway and regulation mechanisms have rarely been reported which hinders the improvement of production efficiency. Therefore, this study aims to identify key metabolic nodes in the chrysolaminarin biosynthetic pathway. A phosphoglucomutase (PGM) in the model microalga Phaeodactylum tricornutum, revealing its critical role in chrysolaminarin biosynthesis is identified. PGM overexpression significantly elevates chrysolaminarin content by 2.54-fold and reaches 25.6% of cell dry weight; while algal growth and photosynthesis are not impaired. Besides, PGM overexpression up- and down-regulates the expression of chrysolaminarin and lipid biosynthetic genes, respectively. Microscopic analysis of aniline blue stained cells reveals that overproduced chrysolaminarin localized predominantly in vacuoles. Lipidomic analyses reveal that PGM overexpression significantly reduces the lipid content. The findings reveal the critical role of PGM in regulating the carbon flux between carbohydrate and lipid biosynthesis in microalgae, and provide a promising candidate for high efficiency production of chrysolaminarin.

Dopamine-Triggered One-Step Polymerization and Codeposition of Acrylate Monomers for Functional Coatings.

Surface modification has been well recognized as a promising strategy to design and exploit diversified functional materials. However, conventional modification strategies usually suffer from complicated manufacture procedures and lack of universality. Herein, a facile, robust, and versatile approach is proposed to achieve the surface functionalization using dopamine and acrylate monomers via a one-step polymerization and codeposition process. The gel permeation chromatography, proton nuclear magnetic resonance, liquid chromatography-mass spectrometry, and UV-visible spectra results indicate that dopamine possesses the capability of triggering the polymerization of acrylate monomers into high-molecular-weight products, and the inherent adhesive ability of polydopamine can assist the polymerized products to deposit on various substrates. Besides, protein-resistant, antibacterial, and cell adhesion-resistant surfaces can be easily fabricated via the finely designed integration of corresponding acrylate monomers into the codeposition systems. This approach of in situ polymerization and codeposition significantly simplifies the fabrication process and provides more manifold choices for surface modification, which will open a new door for broadening the applications of polydopamine-based coatings.

MnO2-induced synthesis of fluorescent polydopamine nanoparticles for reduced glutathione sensing in human whole blood.

Polydopamine (PDA) nanoparticles, as a kind of popular polymer material, have attracted a great deal of attention from various areas including materials science, biomedicine, energy, environmental science and so on owing to their striking physicochemical properties. Herein, we reported for the first time the synthesis of intrinsic fluorescent PDA nanoparticles using MnO2 as an oxidant. In the presence of MnO2, dopamine was quickly oxidized into its quinone derivative, and autopolymerized into fluorescent PDA nanoparticles. Using fluorescent PDA nanoparticles as a fluorescence signal indicator, we further established a cost-effective sensor for rapid, sensitive and selective sensing of reduced glutathione (GSH) based on the redox reaction between MnO2 and GSH, and the key role of MnO2 in the formation of fluorescent PDA nanoparticles. GSH has the capability of reducing MnO2 into Mn(2+), which inhibited the formation of the fluorescent PDA nanoparticles. Thus, the concentration of GSH was directly related to the decreased fluorescence signal intensity of the PDA nanoparticles. The sensor showed good sensing performance for GSH detection with high sensitivity and desirable selectivity over other potential interfering species. Additionally, the sensor exhibited excellent practical applications for GSH detection in human whole blood samples, which presents potential applications in biological detection and clinical diagnosis.