Effect of varying auxiliaries on maxillary incisor torque control with clear aligners: A finite element analysis.

INTRODUCTION: This study aimed to evaluate the effects of varying auxiliaries on tooth movement and stress distribution when maxillary central incisors were torqued 1° with a clear aligner through finite element analysis. METHODS: Three-dimensional finite element models, including maxillary alveolar bone, periodontal ligament, dentition, and clear aligner, were constructed. According to the auxiliaries designed on the maxillary central incisor, 5 models were created: (1) without auxiliaries (control model), (2) with the power ridge, (3) with the semi-ellipsoid attachment, (4) with the horizontal rectangular attachment, and (5) with the horizontal cylinder attachment. The tooth movement and periodontal ligament stress distribution after a palatal root torque of 1° were analyzed for each of the 5 models. RESULTS: With 1° torque predicted, the maxillary central incisor without auxiliaries showed a tendency of labial tipping, mesial tipping, and intrusion. The rotation center moved occlusally in the power ridge model. The labiolingual inclination variation increased in the semi-ellipsoid attachment model but decreased in the power ridge model. The maxillary central incisor is twisted in the distal direction in the power ridge model. The maxillary central incisor of the horizontal rectangular attachment and the horizontal cylinder attachment model behaved similarly to the control model. Periodontal stresses were concentrated in the cervical and apical areas. The maximum von Mises stresses were 11.6, 12.4, 3.81, 1.14, and 11.0 kPa in the 5 models. The semi-ellipsoid attachment model exhibited a more uniform stress distribution than the other models. CONCLUSIONS: Semi-ellipsoid attachment performed better efficacy on labiolingual inclination, and power ridge performed better efficacy on root control. However, a distal twist of maxillary incisors could be generated by the power ridge.

Efficacy of upper-incisor torque control with clear aligners: a retrospective study using cone-beam computed tomography.

OBJECTIVES: The objectives of this retrospective clinical study were to evaluate the efficacy of clear aligners on upper-incisor torque control, with the expectation of providing guidance for clinics. MATERIALS AND METHODS: Pretreatment (T0) and posttreatment (T1) cone-beam computed tomography (CBCT) scans of 47 patients with a nonextraction treatment using clear aligners were obtained and 120 upper-incisors with torque ≥5° were selected. Voxel-based superimpositions were performed using Dolphin imaging software and achieved movements were then measured. Difference between achieved and predicted movement (DAPM) and the efficiency for upper-incisor torque were used to evaluate the torque control efficacy. RESULTS: The achieved torque movement with clear aligners was lower than predicted significantly, as the mean efficiency was 46.81±33.95%. Additionally, the achieved incisor movement of the crown and root differed significantly from the predicted movement, especially root movement. CONCLUSIONS: Clear aligners struggle to control upper-incisor torque, particularly root movement. In that case, overcorrection is necessary to prevent torque loss. CLINICAL RELEVANCE: Clear aligners remain a limitation on torque control and overcorrection should be considered.

Prevalence of Oral Exostoses in Northern China During the Past Six Millennia-From a Sex and Age Perspective.

This study is intended to investigate oral exostoses of 5 sample populations, spanning over 6000 years, from the same region of Northern China, to determine the significance of sex and age on the development of oral exostoses during each time period. The samples analyzed were 306 dry jaws from human skeletons, which were excavated from 4 archeological sites: Banpo (6700-5600 y BP), Shaolingyuan (3000 y BP), Shanren (2200 y BP), and Chang'an (1000-1300 y BP), as well as the modern Xi'an district. The sex and the age of the samples at death were estimated. The degree of buccal exostosis (BE), torus mandibularis (TM), and torus palatinus (TP) and the TP shape were recorded. The results showed BEs in the Banpo and Chang'an regions, TMs in the Banpo region were more often diagnosed in males than in females. Conversely, females in Shaolingyuan showed a higher prevalence and severity of TM than that in males. The occurrence of BEs in the Shanren and Xi'an regions, TMs in the Banpo, Chang'an, and Xi'an regions, as well as TPs in the Banpo region significantly increased with age at death. In conclusion, sex differences and increasing trends with age in relation to oral exostoses were found in samples from Northern China during the past six millennia.

Correction of the transverse discrepancy-induced spontaneous mandibular protrusion in Class II Division 1 adolescent patients.

BACKGROUND: A Class Il malocclusion is the most frequent sagittal skeletal disharmony presenting for orthodontic treatment. A transverse interarch discrepancy ITID) may be considered as a possible functional cause of a Class 11 relationship. OBJECTIVE: The purpose of the present study was to determine transverse interarch width dimensions before and after orthodontic therapy and their possible relationship with increased mandibular projection following treatment. METHODS: The sample included 40 adolescent patients who were divided into two groups, one possessing and one without a transverse discrepancy. Interarch width differences (including ICWD, IPWD, IMWD, IAWD) were measured before and after treatment, and Pogonion (Pog) to Nasion (NJ perpendicular was similarly measured in each group. RESULTS: The differences in arch and alveolar width dimensions between the two groups (including ICWD, IPWDI, IPWDII, IMWD, IAWD) before treatment were statistically significant (p < 0.05). A comparison of Pog to N perpendicular between the two groups showed that mandibular protrusion after treatment in the transverse discrepancy group was 2.6 ± 1.3 mm, while mandibular protrusion after treatment in the group without a transverse discrepancy was 0.6 ±0.3 mm. The statistical comparison showed that the differences were significant (p < 0.01). CONCLUSION: A transverse interarch discrepancy may have a functional relationship with mandible retrusion. If a transverse discrepancy is corrected via orthodontic treatment, the mandible may spontaneously protrude.

Regulation of OPG and RANKL expressed by human dental follicle cells in osteoclastogenesis.

We investigate whether the expression of the receptor activator of nuclear factor kappa-B ligand (RANKL) and osteoprotegerin (OPG) in human dental follicle cells (HDFCs) regulated by colony stimulating factor 1 (CSF-1), parathyroid hormone-related protein (PTHrP) and bone morphogenetic protein-2 (BMP-2) contributes to osteoclastogenesis. Adolescent human impacted third mandibular molars were used to separate HDFCs. These cells were incubated with PTHrP (10 ng/ml), CSF-1 (25 ng/ml), or BMP-2 (100 ng/ml) for 0.5, 1, 3, 6 and 12 h. The expression of OPG and RANKL was investigated by immunohistochemistry and reverse transcription polymerase chain reaction (RT-PCR). Two co-culture systems and tartrate-resistant acid phosphatase (TRAP) staining were used to examine osteoclast formation. Scanning electron microscopy was utilized for the resorption pit assay. RANKL and OPG were expressed innately in HDFCs. Exogenous PTHrP, CSF-1 and BMP-2 chronologically regulated the expression of RANKL and OPG in HDFCs. PTHrP and CSF-1 had similar regulative patterns leading to the up-regulated expression of RANKL and the down-regulated expression of OPG and opposite for BMP-2. The number of TRAP-positive peripheral blood mononuclear cells (PBMCs) slightly increased in contacted co-culture of HDFCs and PBMCs, whereas secreted OPG from HDFCs inhibited osteoclastogenesis in the transwell co-culture system. Contacted co-culture of HDFCs and PBMCs exhibited small and shallow resorption pits, whereas in the transwell co-culture system, secreted OPG from HDFCs reduced the resorption pits, reflecting the difference in osteoclast production. Collectively, we found a dual action of HDFCs in osteoclastogenesis; moreover, PTHrP, CSF-1 and BMP-2 might influence osteoclastogenesis by regulating the expression of RANKL and OPG in HDFCs.

Quantitative evaluation of maxillary interradicular bone with cone-beam computed tomography for bicortical placement of orthodontic mini-implants.

INTRODUCTION: The purpose of this study was to propose a protocol for safe bicortical placement of mini-implants by measuring the interradicular spaces of the maxillary teeth and the bone quality. METHODS: Cone-beam computed tomography data were obtained from 50 adults. Three-dimensional reconstructions and measurements were made with SimplantPro software (Materialise, Leuven, Belgium). For each interradicular site, the bone thicknesses and interradicular distances at the planes 1.5, 3, 6, and 9 mm above the cementoenamel junction were measured. Standard bone units were defined to evaluate the influences of bone density and the different placement patterns on the stability of the mini-implants. RESULTS: The safe interradicular sites in the maxilla for bicortical placement of 1.5-mm-diameter mini-implants were in all planes between the first and second premolars, and between the second premolar and the first molar. The safe palatal sites were between the first and second molars, and the safe labial sites of the 9-mm plane were between the central incisors, and between the lateral incisor and the canine. The safe buccal sites of the 6- and 9-mm planes were between the first and second molars, and the safe buccal sites of the 3-, 6-, and 9-mm planes were between the canine and the first premolar. Most bone thicknesses were from 8 to 12 mm. The optimal placement angle between the second premolar and the first molar was 58°. Bicortical placement could have more standard bone units than unicortical placement in the maxilla. CONCLUSIONS: Bicortical placement would be more stable in the maxilla. For the site between the molars, special care should be taken at a plane higher than 6 mm to prevent maxillary sinus penetration. The most favorable interradicular area in the maxilla was between the second premolar and the first molar.

A real-time interactive restoration system for intraoral digital videos using segment anything model.

Objective: Poor conditions in the intraoral environment often lead to low-quality photos and videos, hindering further clinical diagnosis. To restore these digital records, this study proposes a real-time interactive restoration system using segment anything model. Methods: Intraoral digital videos, obtained from the vident-lab dataset through an intraoral camera, serve as the input for interactive restoration system. The initial phase employs an interactive segmentation module leveraging segment anything model. Subsequently, a real-time intraframe restoration module and a video enhancement module were designed. A series of ablation studies were systematically conducted to illustrate the superior design of interactive restoration system. Our quantitative evaluation criteria contain restoration quality, segmentation accuracy, and processing speed. Furthermore, the clinical applicability of the processed videos was evaluated by experts. Results: Extensive experiments demonstrated its performance on segmentation with a mean intersection-over-union of 0.977. On video restoration, it leads to reliable performances with peak signal-to-noise ratio of 37.09 and structural similarity index measure of 0.961, respectively. More visualization results are shown on the https://yogurtsam.github.io/iveproject page. Conclusion: Interactive restoration system demonstrates its potential to serve patients and dentists with reliable and controllable intraoral video restoration.

Development of a novel three-dimensional injection guide for trigeminal ganglia.

BACKGROUND: Trigeminal ganglion (TG) plays an important role in the process of orthodontic pain. It's necessary to design an accurate, precise and minimally invasive trigeminal ganglion injection guide plate to study TG. METHODS: Micro-CT was used to obtain the Dicom format data, and three-dimensional (3D) software (mimics and magics23.03) was used to reconstruct 3D head models. Design and modifications of the TG injection guide plate were performed in Magic 23.03 software, and the guide plate was produced by a 3D stereolithography printer. X-ray, micro-CT, Evans blue, and virus transduction were used to demonstrate the accuracy of the guide-assisted injection. Pain levels were evaluated after using the injection guide by a bite force test and Von Frey test. RESULTS: X-ray and micro-CT tests confirmed that the injection needle reached the bilateral trigeminal ganglia fossa. The Evans blue test and virus transduction proved that the injected drug could be accurately injected into the bilateral trigeminal ganglion and the lentivirus could be successfully transfected. The percentage of accurate injection was 10/10 (bilateral trigeminal ganglia). Orofacial pain induced by the trigeminal ganglion injection was mild and returned to baseline within seven days. CONCLUSION: The injection guide described in this study is viable and reliable for the delivery of drugs and virus transduction into the trigeminal ganglia.

Semi or fully automatic tooth segmentation in CBCT images: a review.

Cone beam computed tomography (CBCT) is widely employed in modern dentistry, and tooth segmentation constitutes an integral part of the digital workflow based on these imaging data. Previous methodologies rely heavily on manual segmentation and are time-consuming and labor-intensive in clinical practice. Recently, with advancements in computer vision technology, scholars have conducted in-depth research, proposing various fast and accurate tooth segmentation methods. In this review, we review 55 articles in this field and discuss the effectiveness, advantages, and disadvantages of each approach. In addition to simple classification and discussion, this review aims to reveal how tooth segmentation methods can be improved by the application and refinement of existing image segmentation algorithms to solve problems such as irregular morphology and fuzzy boundaries of teeth. It is assumed that with the optimization of these methods, manual operation will be reduced, and greater accuracy and robustness in tooth segmentation will be achieved. Finally, we highlight the challenges that still exist in this field and provide prospects for future directions.

Abnormal dental follicle cells: A crucial determinant in tooth eruption disorders (Review).

The dental follicle (DF) plays an indispensable role in tooth eruption by regulating bone remodeling through their influence on osteoblast and osteoclast activity. The process of tooth eruption involves a series of intricate regulatory mechanisms and signaling pathways. Disruption of the parathyroid hormone­related protein (PTHrP) in the PTHrP­PTHrP receptor signaling pathway inhibits osteoclast differentiation by DF cells (DFCs), thus resulting in obstructed tooth eruption. Furthermore, parathyroid hormone receptor­1 mutations are linked to primary tooth eruption failure. Additionally, the Wnt/ß­catenin, TGF­ß, bone morphogenetic protein and Hedgehog signaling pathways have crucial roles in DFC involvement in tooth eruption. DFC signal loss or alteration inhibits osteoclast differentiation, affects osteoblast and cementoblast differentiation, and suppresses DFC proliferation, thus resulting in failed tooth eruptions. Abnormal tooth eruption is also associated with a range of systemic syndromes and genetic diseases, predominantly resulting from pathogenic gene mutations. Among these conditions, the following disorders arise due to genetic mutations that disrupt DFCs and impede proper tooth eruption: Cleidocranial dysplasia associated with Runt­related gene 2 gene mutations; osteosclerosis caused by CLCN7 gene mutations; mucopolysaccharidosis type VI resulting from arylsulfatase B gene mutations; enamel renal syndrome due to FAM20A gene mutations; and dentin dysplasia caused by mutations in the VPS4B gene. In addition, regional odontodysplasia and multiple calcific hyperplastic DFs are involved in tooth eruption failure; however, they are not related to gene mutations. The specific mechanism for this effect requires further investigation. To the best of our knowledge, previous reviews have not comprehensively summarized the syndromes associated with DF abnormalities manifesting as abnormal tooth eruption. Therefore, the present review aims to consolidate the current knowledge on DFC signaling pathways implicated in abnormal tooth eruption, and their association with disorders of tooth eruption in genetic diseases and syndromes, thereby providing a valuable reference for future related research.

The role of the Piezo1 channel in osteoblasts under cyclic stretching: A study on osteogenic and osteoclast factors.

OBJECTIVES: Orthodontic tooth movement is a mechanobiological reaction induced by appropriate forces, including bone remodeling. The mechanosensitive Piezo channels have been shown to contribute to bone remodeling. However, information about the pathways through which Piezo channels affects osteoblasts remains limited. Thus, we aimed to investigate the influence of Piezo1 on the osteogenic and osteoclast factors in osteoblasts under mechanical load. MATERIALS AND METHODS: Cyclic stretch (CS) experiments on MC3T3-E1 were conducted using a BioDynamic mechanical stretching device. The Piezo1 channel blocker GsMTx4 and the Piezo1 channel agonist Yoda1 were used 12 h before the application of CS. MC3T3-E1 cells were then subjected to 15% CS, and the expression of Piezo1, Piezo2, BMP-2, OCN, Runx2, RANKL, p-p65/p65, and ALP was measured using quantitative real-time polymerase chain reaction, western blot, alkaline phosphatase staining, and immunofluorescence staining. RESULTS: CS of 15% induced the highest expression of Piezo channel and osteoblast factors. Yoda1 significantly increased the CS-upregulated expression of Piezo1 and ALP activity but not Piezo2 and RANKL. GsMTx4 downregulated the CS-upregulated expression of Piezo1, Piezo2, Runx2, OCN, p-65/65, and ALP activity but could not completely reduce CS-upregulated BMP-2. CONCLUSIONS: The appropriate force is more suitable for promoting osteogenic differentiation in MC3T3-E1. The Piezo1 channel participates in osteogenic differentiation of osteoblasts through its influence on the expression of osteogenic factors like BMP-2, Runx2, and OCN and is involved in regulating osteoclasts by influencing phosphorylated p65. These results provide a foundation for further exploration of osteoblast function in orthodontic tooth movement.

Bibliometric research on analysis of links between periodontitis and cardiovascular diseases.

Background: Periodontitis (PD) and cardiovascular diseases (CVD) rank among the most prevalent pathologies worldwide, and their correlation has been a subject of prolonged investigation. Numerous studies suggest shared etiological factors; however, a definitive causal connection remains unestablished. The objective of this study was to employ bibliometric and visual analyses in order to comprehensively examine the overarching characteristics, focal areas of research, and prospective trends pertaining to the PD-CVD relationship. Methods: We sourced articles, reviews, and online publications on PD- and CVD- research from the Web of Science Core Collection (WoSCC) spanning from January 1, 1993, to May 15, 2023. A triad of analytical tools (R-Bibliometrix, VOSviewer 1.6.19, and CiteSpace 6.2.R3) were utilized to facilitate collaboration network analysis, co-citation analysis, co-occurrence analysis, and citation burst detection. Results: Out of the 1,116 publications that fulfilled the eligibility criteria in the WoSCC database, the comprehensive characteristics analysis divulged a sustained growth trend in publication frequency. In the cluster analysis of reference co-citation and keyword co-occurrence, prominent themes such as "periodontitis", "cardiovascular diseases", "inflammation", "Porphyromonas gingivalis", and "atherosclerosis" consistently emerged. Contemporary topics such as "peri-implantitis," "COVID-19", "cardiovascular risk factors," and "endocarditis" were pinpointed as burgeoning research hotspots. Conclusion: Based on this bibliometric study, in the field of association studies between PD and CVD, the etiologic mechanisms of both diseases have been intensively studied in the last three decades. Periodontal pathogens might serve as potential initiating factors linking PD and CVD. Inflammation may constitute a significant etiological factor shared by both diseases. Several emerging topics, such as COVID-19 and peri-implantitis, exhibit promising potential. This exhaustive overview casts light on pivotal research arenas, augmenting the field's understanding and stimulating further scholarly investigations.

Nano-Drug Delivery Systems in Oral Cancer Therapy: Recent Developments and Prospective.

Oral cancer (OC), characterized by malignant tumors in the mouth, is one of the most prevalent malignancies worldwide. Chemotherapy is a commonly used treatment for OC; however, it often leads to severe side effects on human bodies. In recent years, nanotechnology has emerged as a promising solution for managing OC using nanomaterials and nanoparticles (NPs). Nano-drug delivery systems (nano-DDSs) that employ various NPs as nanocarriers have been extensively developed to enhance current OC therapies by achieving controlled drug release and targeted drug delivery. Through searching and analyzing relevant research literature, it was found that certain nano-DDSs can improve the therapeutic effect of drugs by enhancing drug accumulation in tumor tissues. Furthermore, they can achieve targeted delivery and controlled release of drugs through adjustments in particle size, surface functionalization, and drug encapsulation technology of nano-DDSs. The application of nano-DDSs provides a new tool and strategy for OC therapy, offering personalized treatment options for OC patients by enhancing drug delivery, reducing toxic side effects, and improving therapeutic outcomes. However, the use of nano-DDSs in OC therapy still faces challenges such as toxicity, precise targeting, biodegradability, and satisfying drug-release kinetics. Overall, this review evaluates the potential and limitations of different nano-DDSs in OC therapy, focusing on their components, mechanisms of action, and laboratory therapeutic effects, aiming to provide insights into understanding, designing, and developing more effective and safer nano-DDSs. Future studies should focus on addressing these issues to further advance the application and development of nano-DDSs in OC therapy.

Baicalin clears inflammation by enhancing macrophage efferocytosis via inhibition of RhoA/ROCK signaling pathway and regulating macrophage polarization.

Effective efferocytosis of apoptotic polymorphonuclear leukocytes (PMNs) in the initiation and resolution of inflammation iscrucial for preventing progression to chronicinflammatorydisease. Baicalin, a bioactive flavonoid drug, exerts multiple anti-inflammatory effects; however, its underlying mechanism remains to be elucidated. Here, we investigated the role of baicalin in efferocytosis in vitro and in a Porphyromonas gingivalis lipopolysaccharide (LPS)-inducedmurinemodelofpleurisy. We found that the macrophage engulfment of apoptotic PMNs was significantly promoted by baicalin in an inflammatory environment with an effectiveness similar to that of N-acetylcysteine. Meanwhile, the production of reactive oxygen species was significantly blocked in P. gingivalis LPS-stimulated J774A.1 macrophages by baicalin, and the RhoA/ROCK signaling pathway was inhibited in the same way as the ROCK inhibitor, Y-27632. In addition, the M1/M2macrophage ratio and the proinflammatory cytokine TNF-α were downregulated, whereas the anti-inflammatory cytokine IL-10 was upregulated both in vitro and in vivo. Therefore, we propose that baicalin may increase efferocytosis by acting as an antioxidant via a RhoA-dependent pathway and regulate macrophage polarization, thus promoting inflammatory resolution.

Heterogeneous Structure Regulated by Selection Pressure on Bacterial Adhesion Optimized the Viability Stratification Structure of Electroactive Biofilms.

As the core of microbial fuel cells (MFCs), the components and structure of electroactive biofilms (EABs) are essential for MFC performance. Bacterial adhesion plays a vital role in shaping the structure of EABs, but the effect of bacterial adhesion under selection pressure on EABs has not been systematically studied. Here, the response of the composition, structure, and electrochemical performance of EABs to the selective adhesion pressure due to the selective coordination of Fe(III) and Co(II) with thiol and the different affinities for bacteria on hybrid electrodes (Fe1Co, Fe4Co, and Fe10Co) were comprehensively investigated. Compared with carbon cloth (CC), the appropriate selective adhesion pressure of Fe4Co activated the dead inner core of EABs and optimized their viability stratification structure. Both the total viability and the viability of the inner core layer in the Fe4Co EAB (0.67, 0.70 ± 0.01) were higher than those of the CC (0.46, 0.54 ± 0.01), Fe1Co (0.50, 0.48 ± 0.03), and Fe10Co (0.51, 0.51 ± 0.03). Moreover, a higher proportion of proteins was detected in the Fe4Co EAB, enhancing the redox activity of extracellular polymeric substances. Fe4Co enriched Geobacter and stimulated microbial metabolism. Electrochemical analysis revealed that the Fe4Co EAB was the most electroactive EAB, with a maximum power density of 2032.4 mW m-2, which was 1.7, 1.3, and 1.1 times that of the CC (1202.6 mW m-2), Fe1Co (1610.3 mW m-2), and Fe10Co (1824.4 mW m-2) EABs, respectively. Our findings confirmed that highly active EABs could be formed by imposing selection pressure on bacterial adhesion.

Runx2 and Nell-1 in dental follicle progenitor cells regulate bone remodeling and tooth eruption.

Dental follicles are necessary for tooth eruption, surround the enamel organ and dental papilla, and regulate both the formation and resorption of alveolar bone. Dental follicle progenitor cells (DFPCs), which are stem cells found in dental follicles, differentiate into different kinds of cells that are necessary for tooth formation and eruption. Runt-related transcription factor 2 (Runx2) is a transcription factor that is essential for osteoblasts and osteoclasts differentiation, as well as bone remodeling. Mutation of Runx2 causing cleidocranial dysplasia negatively affects osteogenesis and the osteoclastic ability of dental follicles, resulting in tooth eruption difficulties. Among a variety of cells and molecules, Nel-like molecule type 1 (Nell-1) plays an important role in neural crest-derived tissues and is strongly expressed in dental follicles. Nell-1 was originally identified in pathologically fused and fusing sutures of patients with unilateral coronal synostosis, and it plays indispensable roles in bone remodeling, including roles in osteoblast differentiation, bone formation and regeneration, craniofacial skeleton development, and the differentiation of many kinds of stem cells. Runx2 was proven to directly target the Nell-1 gene and regulate its expression. These studies suggested that Runx2/Nell-1 axis may play an important role in the process of tooth eruption by affecting DFPCs. Studies on short and long regulatory noncoding RNAs have revealed the complexity of RNA-mediated regulation of gene expression at the posttranscriptional level. This ceRNA network participates in the regulation of Runx2 and Nell-1 gene expression in a complex way. However, non-study indicated the potential connection between Runx2 and Nell-1, and further researches are still needed.

Experts' consensus on space management of mixed dentition.

The mixed dentition stage is the period between primary and permanent dentition. The following biological processes are complicated and variable: jaw growth, development of inherited permanent teeth embryo, physiological absorption of primary teeth, restoration of surrounding alveolar bones, and growth and function establishment of soft tissues. For the normal development of the jaw, the establishment of the good occlusion relationship, development, and function of soft tissue is very important, whether or not the primary teeth are normally replaced by the permanent teeth in the mixed dentition stage. The eruption space is linked to the normal replacement of primary and permanent teeth. The presence of a mixed dentition space results in the incidence and progression of malocclusion and impacts the normal growth and development of the occlusion, jaw, and face. Space management in the mixed dentition stage is a crucial means to prevent and reduce malocclusion. The following were discussed and analyzed: the possible space problems, why the size of the space was affected, the content that needs to be assessed, and the methods of space management in the mixed dentition that can be used to unify and standardize the management of mixed dentition. This paper was developed to serve as a guide for regulated space management during the mixed dentition period.

The Antioxidant Resveratrol Protects against Chondrocyte Apoptosis by Regulating the COX-2/NF-κB Pathway in Created Temporomandibular Osteoarthritis.

Temporomandibular joint osteoarthritis (TMJOA) is characterized by chronic inflammatory degradation of mandibular condylar cartilage (MCC). Studies have found a positive correlation between inflammation and cyclooxygenase- (COX-) 2 in OA pathology. NF-κB is a crucial transcription factor of inflammatory and immune responses in the cause of TMJOA pathology. Resveratrol (RES) plays a critical role in antioxidation and anti-inflammation. But, studies on the effects of RES on TMJOA are very limited. So, the purpose of this study is to investigate the antioxidant and protective effects of RES against MCC degradation through downregulating COX-2/NF-κB expression. In vitro studies, the MCC cells were divided into three groups: the NC group, OA group, and RES group. The optimum dose of RES (10 µM) was determined. The TMJOA model of mice was created by injection of collagenase. And mice were injected with RES (100 µg/10 µl) 3 times one week for 4 weeks in the RES group. The expressions of COX-2, P65, MMP1, MMP13, COL2, and ACAN were measured by RT-PCR. Morphological changes of MCC were studied with HE staining. The results showed that inflammation could induce MCC degradation in vitro and vivo, while RES could reverse the degradation. Meanwhile, RES could downregulate COX-2/NF-κB/MMP expression and increase cartilage markers in vitro and vivo studies. The results indicated that RES treatment had antioxidant effects against chondrocyte apoptosis by downregulating the COX-2/NF-κB pathway in created TMJOA.

Tailoring Surface Properties of Electrodes for Synchronous Enhanced Extracellular Electron Transfer and Enriched Exoelectrogens in Microbial Fuel Cells.

An extracellular electron transfer (EET) process between an electroactive biofilm and an electrode is a crucial step for the performance of microbial fuel cells (MFCs), which is highly related to the enrichment of exoelectrogens and the electrocatalytic activity of the electrode. Herein, an efficient N- and Fe-abundant carbon cloth (CC) electrode with the comodification of iron porphyrin (FePor) and polyquaternium-7 (PQ) was synthesized using a facile solvent evaporation and immersion method and developed as an anode (named FePor-PQ) in MFCs. The surface structural characterizations confirmed the successful introduction of N and Fe atoms, whereas FePor-PQ achieved the N content of 9.59 at %, which may offer various active sites for EET. The introduction of PQ contributed to improving the surface hydrophilicity, providing the composite electrode good biocompatibility for bacterial attachment and colonization as well as substrate diffusion. Based on the advantages, the MFC with the FePor-PQ anode produced a maximum power density of 2165.7 mW m-2, strikingly higher than those of CC (1124.0 mW m-2), PQ (1668.8 mW m-2), and FePor (1978.9 mW m-2). Furthermore, with the EET mediated by the binding of flavins and c-type cytochromes on the outer membrane was enhanced prominently, the typical exoelectrogen Geobacter was enriched up to 55.84% in the FePor-PQ anode biofilm. This work reveals a synergistic effect from heteroatom coating and surface properties tailoring to boost both the EET efficiency and exoelectrogen enrichment for enhancing MFC performance, which also provides valuable insights for designing electrodes in other bio-electrochemical systems.

Vital Pulp Therapy in Permanent Teeth with Irreversible Pulpitis Caused by Caries: A Prospective Cohort Study.

BACKGROUND: When a tooth is diagnosed with irreversible pulpitis, root canal therapy (RCT) is generally performed to completely remove pulp tissue, which might lead to a higher risk of loss of vascularity, and teeth being more prone to fracture. Vital pulp therapy (VPT) is a personalized method of treating irreversible pulpitis, which conforms to the trend of minimally invasive endodontics. The remaining vital pulp could promote the physiological development of the roots of young permanent teeth with incomplete apical foramen. However, clear guidelines for VPT indication are still missing. OBJECTIVE: This prospective cohort study evaluated the outcomes of vital pulp therapy (VPT) using iRoot BP Plus (Innovative Bioceramix Inc, Vancouver, BC, Canada) in permanent teeth of 6- to 20-year-old patients with irreversible pulpitis caused by caries and analyzed the preoperative factors affecting VPT prognosis. METHODS: Fifty-nine permanent teeth in 59 patients with irreversible pulpitis caused by caries were treated with VPT using iRoot BP Plus. All patients received VPT under a standardized protocol. After informed consent, teeth were isolated with a dental dam, then operators performed VPT with iRoot BP Plus and restored the teeth with composite resin or stainless steel crown. Patients were postoperatively recalled after 3, 6 and 12 months and then recalled annually. Successful cases were defined as successful in both clinical and radiographic evaluations. A statistical analysis was performed using the Fisher exact test, and the level of significant difference was p < 0.05. RESULTS: After 6-36 months of follow-up, a total of 57 teeth from 57 patients were accessible for evaluation. The mean age of subjects was 11.75 ± 3.81 years. The overall clinical and radiographic success rate of VPT was 91.2% (52/57). With an observation time of one year or more, the success rate was 90.5% (38/42). All the symptoms and physical examination findings showed no significant effect on VPT prognosis (p > 0.05) using a binary logistic regression model. CONCLUSIONS: Permanent teeth in 6- to 20-year-old patients diagnosed as irreversible pulpitis caused by caries can be successfully treated with VPT using iRoot BP Plus.