Clearance of bacteria from lymph nodes in sheep immunized with Brucella suis S2 vaccine is associated with M1 macrophage activation.

Ovine brucellosis is a global zoonotic disease of sheep caused by Brucella melitensis, which inflicts a significant burden on human and animal health. Brucella suis strain S2 (B. suis S2) is a smooth live attenuated vaccine for the prevention of ovine brucellosis in China. However, no previous studies have assessed the immunogenicity of B. suis S2 vaccine after oral immunization in sheep. Here, we attempted to evaluate the ovine immune response over the course of B. suis S2 immunization and to identify in vivo predictors for vaccine development. Body temperature, serum Brucella antibodies, serum cytokines (IL-12p70 and interferon [IFN]-γ), and bacterial load in the mandibular lymph nodes (LN), superficial cervical LN, superficial inguinal LN, and spleen were investigated to determine the safety and efficacy of the vaccine. The abnormal body temperature of sheep occurred within 8 days post-infection (dpi). Brucella suis S2 persisted for a short time (< 21 dpi) in the mandibular LN. The highest level of IL-12p70 was observed at 9 dpi, whereas serum IFN-γ levels peaked at 12 dpi. Transcriptome analysis and quantitative reverse transcription PCR were performed to determine gene expression profiles in the mandibular LN of sheep. Antigen processing and presentation pathway was the dominant pathway related to the dataset. Our studies suggest that the immune response in ovine LN resembled type 1 immunity with the secretion of IL-12p70 and IFN-γ after B.suis S2 immunization and the vaccine may eliminate Brucella via stimulation of M1 macrophages through the course of Th cells.

GSH-Responsive Nanoprodrug to Inhibit Glycolysis and Alleviate Immunosuppression for Cancer Therapy.

Blocking energy metabolism of cancer cells and simultaneously stimulating the immune system to perform immune attack are significant for cancer treatment. However, how to potently deliver different drugs with these functions remains a challenge. Herein, we synthesized a nanoprodrug formed by a F127-coated drug dimer to inhibit glycolysis of cancer cells and alleviate the immunosuppressive microenvironment. The dimer was delicately constructed to connect lonidamine (LND) and NLG919 by a disulfide bond which can be cleaved by excess GSH to release two drugs. LND can decrease the expression of hexokinase II and destroy mitochondria to restrain glycolysis for energy supply. NLG919 can reduce the accumulation of kynurenine and the number of regulatory T cells, thus alleviating the immunosuppressive microenvironment. Notably, the consumption of GSH by disulfide bond increased the intracellular oxidative stress and triggered immunogenic cell death of cancer cells. This strategy can offer more possibilities to explore dimeric prodrugs for synergistic cancer therapy.

A Biomimetic Approach for Spatially Controlled Cell Membrane Engineering Using Fusogenic Spherical Nucleic Acid.

Engineering of the cell plasma membrane using functional DNA is important for studying and controlling cellular behaviors. However, most efforts to apply artificial DNA interactions on cells are limited to external membrane surface due to the lack of suitable synthetic tools to engineer the intracellular side, which impedes many applications in cell biology. Inspired by the natural extracellular vesicle-cell fusion process, we have developed a fusogenic spherical nucleic acid construct to realize robust DNA functionalization on both external and internal cell surfaces via liposome fusion-based transport (LiFT) strategy, which enables applications including the construction of heterotypic cell assembly for programmed signaling pathway and detection of intracellular metabolites. This approach can engineer cell membranes in a highly efficient and spatially controlled manner, allowing one to build anisotropic membrane structures with two orthogonal DNA functionalities.

Inhibition of experimental periodontitis by a monoclonal antibody against Porphyromonas gingivalis HA2.

It is known that complexes of the multi-protein, gingipain, possess heme binding domains (hemagglutinin 2, HA2) that bind hemoglobin to provide heme and iron to the bacterium, Porphyromonas gingivalis. The DHYAVMISK peptide sequence was proposed to act as an inhibitor of hemin binding, and thus, it might be used to control or prevent periodontal disease. In this study, we created a monoclonal antibody (mAb) that targeted the DHYAVMISK peptide, aimed to determine whether it could inhibit the growth of P. gingivalis in vitro, and block its induction of experimental periodontitis and subsequent bone loss. Peptide DGFPG-DHYAVMISK conjugated to KLH (DK-KLH) was synthetic, and injected subcutaneously into BALB/c mice to generate specific mAbs with the hybridoma technique. We isolated mAb 1H11, which showed specific binding to DK. When we incubated these mAbs with P. gingivalis in vitro for 18 h, bacterial growth was significantly lower in cultures treated with mAb 1H11 compared to those treated with control (PBS; P < 0.05). Next, we induced experimental periodontitis in mouse models with a silk ligature and a P. gingivalis infection. When we injected the mAbs into the gingival sulcus, the group treated with mAb 1H11 displayed a reduction in bone loss compared to the other treatment groups. Thus, mAb 1H11 might provide protection against a P. gingivalis infection. Accordingly, this antibody could serve as a candidate therapy for periodontitis or other infections caused by P. gingivalis.

Infiltration and sealing for managing non-cavitated proximal lesions: a systematic review and meta-analysis.

BACKGROUND: Infiltration and sealing are micro-invasive treatments for arresting proximal non-cavitated caries lesions; however, their efficacies under different conditions remain unknown. This systematic review and meta-analysis aimed to evaluate the caries-arresting effectiveness of infiltration and sealing and to further analyse their efficacies across different dentition types and caries risk levels. METHODS: Six electronic databases were searched for published literature, and references were manually searched. Split-mouth randomised controlled trials (RCTs) to compare the effectiveness between infiltration/sealing and non-invasive treatments in proximal lesions were included. The primary outcome was obtained from radiographical readings. RESULTS: In total, 1033 citations were identified, and 17 RCTs (22 articles) were included. Infiltration and sealing reduced the odds of lesion progression (infiltration vs. non-invasive: OR = 0.21, 95% CI 0.15-0.30; sealing vs. placebo: OR = 0.27, 95% CI 0.18-0.42). For both the primary and permanent dentitions, infiltration and sealing were more effective than non-invasive treatments (primary dentition: OR = 0.30, 95% CI 0.20-0.45; permanent dentition: OR = 0.20, 95% CI 0.14-0.28). The overall effects of infiltration and sealing were significantly different from the control effects based on different caries risk levels (OR = 0.20, 95% CI 0.14-0.28). Except for caries risk at moderate levels (moderate risk: OR = 0.32, 95% CI 0.01-8.27), there were significant differences between micro-invasive and non-invasive treatments (low risk: OR = 0.24, 95% CI 0.08-0.72; low to moderate risk: OR = 0.38, 95% CI 0.18-0.81; moderate to high risk: OR = 0.17, 95% CI 0.10-0.29; and high risk: OR = 0.14, 95% CI 0.07-0.28). Except for caries risk at moderate levels (moderate risk: OR = 0.32, 95% CI 0.01-8.27), infiltration was superior (low risk: OR = 0.24, 95% CI 0.08-0.72; low to moderate risk: OR = 0.38, 95% CI 0.18-0.81; moderate to high risk: OR = 0.20, 95% CI 0.10-0.39; and high risk: OR = 0.14, 95% CI 0.05-0.37). CONCLUSION: Infiltration and sealing were more efficacious than non-invasive treatments for halting non-cavitated proximal lesions.

Identification of bacteria associated with periapical abscesses of primary teeth by sequence analysis of 16S rDNA clone libraries.

OBJECTIVE: This study aims to detect the predominant bacteria in acute periapical abscesses of primary teeth using culture-independent molecular methods based on 16S ribosomal DNA cloning. METHODS: Purulent material was collected from nine children diagnosed with abscesses of endodontic origin. DNA was extracted and the 16S rRNA gene amplified with universal primer pairs 27F and 1492R. Amplified genes were cloned, sequenced by Applied Biosystems, and identified by comparison with known 16S rRNA gene sequences. RESULTS: Bacterial DNA was present in all nine purulence samples. A total of 681 clones were classified into 8 phyla, 78 genera, and 125 species/phylotypes. The phyla were Firmicutes, Proteobacteria, Fusobacteria, Bacteroidetes, Actinobacteria, Tenericutes, Deinococcus-Thermus, and Spirochaetes. The most dominant genera were Streptococcus (13.3%), Fusobacterium (11.8%), Parvimonas (7.8%), Prevotella (6.7%), Sphingomonas (5.8%), and Hafnia (5.2%). Fusobacterium nucleatum (11.5%), Parvimonas micra (7.8%), Streptococcus intermedius (6.6%), Sphingomonas echinoides (5.3%), Hafnia alvei (5.2%), and Citrobacter freundii (4.9%) were the most common species/phylotypes. Among these species/phylotypes, F.nucleatum was the most prevalent (7/9). C. freundii, Carnobacterium maltaromaticum, and H. alvei were seldom detected species in acute periapical abscesses but had relatively high abundance and prevalence. CONCLUSION: Acute periapical abscesses are polymicrobial with certain prevalent bacteria, especially anaerobic bacterium. The most predominant and prevalent bacteria of acute periapical abscesses in children was F. nucleatum.

The variation profile of intestinal microbiota in blunt snout bream (Megalobrama amblycephala) during feeding habit transition.

BACKGROUND: The blunt snout bream (Megalobrama amblycephala) is one of the most important commercial herbivorous fish in China, and dietary transition is an important event in blunt snout bream development. Gut microbiota has a vital role to host animal. However, little was known about the relationship among feeding habits transition, gut microbiota and digestive enzymes of gut content. RESULTS: In this study, 186,328 high-quality reads from nine 16S rRNA libraries were obtained using the Illumina MiSeq PE300 platform. The valid sequences were classified into 388 Operational Taxonomic Units, and a total of 223 genera, belonging to 20 phyla, were identified. The clustering result of gut bacterial communities is consistently related to the clustering result of intestinal content compositions. Proteobacteria and Firmicutes constitute the 'core' gut microbiota of blunt snout bream. Cetobacterium and Rhizobium were identified as microbiological markers of gut microbiota at zooplankton-based diet stages and diet transition stages, respectively. Moreover, thirteen potential cellulose-degrading bacteria were detected in our study. The canonical redundancy analysis (RDA) revealed that the feeding habits strongly influenced the gut microbiota and the digestive enzyme activities of gut content, while the result of PICRUSt test suggests that the metabolic capacity of gut microbiota was affected by feeding habit. CONCLUSIONS: This study provided a comprehensive survey of the gut microbiota in blunt snout bream during its dietary transition period for the first time and clearly showed that the gut microbiota was strongly affected by feeding habit. This work allows us to better understand the relationship among gut microbiota, nutrition metabolism and feeding habits in vertebrate. Further, our study provides a reference for future studies investigating the metabolic adaption of herbivorous fish to shift to a vegetarian diet during their life history.

GO-COO-HP-ß-CD nanosphere: a complex construction and its drug-loading properties.

A novel nanosphere based on carboxylated GO (GO-COOH) and hydroxypropyl-beta-CD (HP-ß-CD) was synthesized to construct a complex of GO-COO-HP-ß-CD. The complex formation process was studied using spectral characterization and transmission electron microscopy (TEM). X-ray diffraction and energy dispersive spectroscopy patterns show that HP-ß-CD molecules either cover or intercalate into GO-COOH interlayers in the complex. Fourier transform infrared spectroscopy results indicate that GO-COOH and HP-ß-CD are linked with covalent bonds formed via esterification. When employed as nanohybrid drug carriers for dexamethasone, the inclusion displays good dispersibility validated by dynamic light scattering (DLS). Cytotoxicity assays and hemolysis testing demonstrate that the nanospheres possess good biological compatibility. The loading capacity of dexamethasone is as high as 32.33%, with loading efficiency 64.66%.

Orientation-controlled membrane anchoring of bioorthogonal catalysts on live cells via liposome fusion-based transport.

An obstacle to conducting diverse bioorthogonal reactions in living systems is the sensitivity of artificial metal catalysts. It has been reported that artificial metallocatalysts can be assembled in "cleaner" environments in cells for stabilized performance, which is powerful but is limited by the prerequisite of using specific cells. We report here a strategy to establish membrane-anchored catalysts with precise spatial control via liposome fusion-based transport (MAC-LiFT), loading bioorthogonal catalytic complexes onto either or both sides of the membrane leaflets. We show that the inner face of the cytoplasmic membrane serves as a reliable shelter for metal centers, protecting the complexes from deactivation thus substantially lowering the amount of catalyst needed for effective intracellular catalysis. This MAC-LiFT approach makes it possible to establish catalyst-protective systems with exclusively exogenous agents in a wide array of mammalian cells, allowing convenient and wider use of diverse bioorthogonal reactions in live cellular systems.

Novel Lipase Reactor based on Discontinuous Interfaces in Hydrogel-Organogel Hybrid Gel: A Preliminary Exploration.

According to the "interfacial activation" mechanism, constructing a sufficient interface is the key strategy for lipase-catalytic system designing. Based on the "infinite interface in finite three-dimensional space" logic, in the current study, poly(N,N-dimethylacrylamide) (PDMA)-polybutyl methacrylate (PBMA) hybrid gels were prepared by a two-step crosslinking strategy, subsequently constructed as lipase-interfacial catalytic systems. The results confirm that the PDMA-PBMA hybrid gels with "networks in pores" structures could swell both the aqueous phase and organic phase. The balance between water swelling and isooctane swelling, hybrid gel space (height control), and the lipase entry manner significantly affect the interface construction and consequently the catalytic efficiency. The enzyme-substrate contact rate affected by swelling leads to three catalytic stages. Considering the spatial barrier and distribution of lipases, a potential high-performance lipase reactor can be assembled from small-size, lamellar-like, and porous hybrid gels. The reactors also show good time storage and low temperature tolerance.

Intermittent ultrasound retains cellulases unlock for enhanced cellulosic ethanol with high-porosity biochar for dye adsorption using desirable rice mutant straw.

In this study, optimal ultrasound pretreatment was performed with recalcitrance-reduced rice mutant straw to effectively extract lignin and hemicellulose for improved cellulose accessibility. Intermittent ultrasound-assistant enzymatic hydrolyses were followed to maintain more cellulases unlock and less cellulose surface block with lignin for raised hexose yield at 81 % (% cellulose) and bioethanol concentration at 9.9 g/L, which was higher than those of other mechanical pretreatments as previously conducted. Using all enzyme-undigestible lignocellulose residues, this work generated the biochar with the highest porosity (SBET at 2971 m2/g) among all biomass-based biochar obtained from previous studies. Furthermore, the biochar were respectively examined with high adsorption capacity for Congo red and methylene blue at 7946 mg/g and 861 mg/g. Therefore, this study has demonstrated a green-like process technology for high-yield bioethanol and high-porosity biochar with full biomass utilization by integrating optimal ultrasound pretreatment with intermittent ultrasound-assistant enzymatic hydrolyses of recalcitrance-reduced lignocellulose in crop straws.

A model of radiation-induced temporomandibular joint damage in mice.

PURPOSE: A small animal radiation research platform (SARRP) equipped with a miniature beam system, an image-guided positioning system, and a dose planning system was used to develop and evaluate a mouse model of radiation-induced temporomandibular damage. METHODS: Left jaw disks of adult male C57BL/6 mice and C3H mice were targeted using the SARRP for image-guided irradiation. The total radiation dose was 75 Gy. Experiment 1 (Scoping study): Mice in the C57BL/6 mouse test and control groups were sacrificed at 1, 3, 6, 9, 12, 15, and 18 weeks after irradiation, whereas mice in the C3H test and control groups were sacrificed at 1, 3, 6, 9, and 12 weeks after irradiation. Experiment 2 (Full -scale validation study): Mice in the C57BL/6 mouse test and control groups were sacrificed at 1, 3 and 6 weeks after irradiation. Histopathological analysis of the temporomandibular skeletal muscle in each group was performed using hematoxylin and eosin (H&E) and Masson staining; the temporal mandibular bone was examined through H&E staining. RESULTS: SARRP delivered the rated dose to the temporomandibular joints of C57BL/6 and C3H mice. C3H and C57BL/6 mice in the test group showed different degrees of osteocytic necrosis and osteoporosis at different time points. H&E staining of skeletal muscle tissue showed slight fibrosis in the C57BL/6 test at 3 and 6 weeks time point. CONCLUSION: We established a model of radiation-induced damage in the temporomandibular joint of C57BL/6 mice and demonstrated that the observed physiological and histological changes correspond to radiation damage observed in humans. Furthermore, the SARRP can deliver precise radiation doses.

The Multiple Roles of Periostin in Non-Neoplastic Disease.

Periostin, identified as a matricellular protein and an ECM protein, plays a central role in non-neoplastic diseases. Periostin and its variants have been considered to be normally involved in the progression of most non-neoplastic diseases, including brain injury, ocular diseases, chronic rhinosinusitis, allergic rhinitis, dental diseases, atopic dermatitis, scleroderma, eosinophilic esophagitis, asthma, cardiovascular diseases, lung diseases, liver diseases, chronic kidney diseases, inflammatory bowel disease, and osteoarthrosis. Periostin interacts with protein receptors and transduces signals primarily through the PI3K/Akt and FAK two channels as well as other pathways to elicit tissue remodeling, fibrosis, inflammation, wound healing, repair, angiogenesis, tissue regeneration, bone formation, barrier, and vascular calcification. This review comprehensively integrates the multiple roles of periostin and its variants in non-neoplastic diseases, proposes the utility of periostin as a biological biomarker, and provides potential drug-developing strategies for targeting periostin.

Mechanical Properties and In Vitro Biocompatibility of Hybrid Polymer-HA/BAG Ceramic Dental Materials.

The aim of this study is to prepare hybrid polymer-ceramic dental materials for chairside computer-aided design/computer-aided manufacturing (CAD/CAM) applications. The hybrid polymer-ceramic materials were fabricated via infiltrating polymerizable monomer mixtures into sintered hydroxyapatite/bioactive glass (HA/BAG) ceramic blocks and thermo-curing. The microstructure was observed by scanning electron microscopy and an energy-dispersive spectrometer. The phase structure was analyzed by X-ray diffraction. The composition ratio was analyzed by a thermogravimetric analyzer. The hardness was measured by a Vickers hardness tester. The flexural strength, flexural modulus, and compressive strength were measured and calculated by a universal testing machine. The growth of human gingival fibroblasts was evaluated by a 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyl tetrazolium bromide (MTT) colorimetric assay and immunofluorescence staining. The results showed that the sintering temperature and BAG content affected the mechanical properties of the hybrid polymer-ceramic materials. The X-ray diffraction analysis showed that high-temperature sintering promoted the partial conversion of HA to ß-tricalcium phosphate. The values of the hardness, flexural strength, flexural modulus, and compressive strength of all the hybrid polymer-ceramic materials were 0.89-3.51 GPa, 57.61-118.05 MPa, 20.26-39.77 GPa, and 60.36-390.46 MPa, respectively. The mechanical properties of the hybrid polymer-ceramic materials were similar to natural teeth. As a trade-off between flexural strength and hardness, hybrid polymer-ceramic material with 20 wt.% BAG sintered at 1000 °C was the best material. In vitro experiments confirmed the biocompatibility of the hybrid polymer-ceramic material. Therefore, the hybrid polymer-ceramic material is expected to become a new type of dental restoration material.

Long-term hygroscopic dimensional changes of core buildup materials in deionized water and artificial saliva.

The dimensional stability of core buildup materials plays an important role in clinical application. In this study, hygroscopic dimensional changes of four commercial core buildup materials were investigated in deionized water and artificial saliva for up to 150 days. Specimens were made within a customized cylindrical mold. The initial mass and the apparent mass in liquids were measured. All the tested materials showed hygroscopic expansion after a 150-days immersion time. Hygroscopic expansion of these four materials can partly compensate for the polymerization shrinkage. SDR showed the lowest hygroscopic expansion of the four tested materials when immersed in deionized water and artificial saliva. PC showed the highest hygroscopic expansion in deionized water, while LC showed the highest hygroscopic expansion in artificial saliva. In the case of different immersion solvents, osmotic pressure should be considered. For hygroscopic dimensional changes, the hydrophilicity of monomers and changes of intermolecular forces may be crucial factors.

[Construction of conjugated polymer-exoelectrogen hybrid bioelectrodes and applications in microbial fuel cells].

Microbial fuel cell (MFC) is a bioelectrochemical device, that enables simultaneous wastewater treatment and energy generation. However, a few issues such as low output power, high ohmic internal resistance, and long start-up time greatly limit MFCs' applications. MFC anode is the carrier of microbial attachment, and plays a key role in the generation and transmission of electrons. High-quality bioelectrodes have developed into an effective way to improve MFC performance. Conjugated polymers have advantages of low cost, high conductivity, chemical stability and good biocompatibility. The use of conjugated polymers to modify bioelectrodes can achieve a large specific surface area and shorten the charge transfer path, thereby achieving efficient biological electrochemical performance. In addition, bacteria can be coated with nano-scale conjugated polymer and effectively transfer the electrons generated by cells to electrodes. This article reviews the recently reported applications of conjugated polymers in microbial fuel cells, focusing on the MFC anode materials modified by conjugated polymers. This review also systematically analyzes the advantages and limitations of conjugated polymers, and how these composite hybrid bioelectrodes solve practical issues such as low energy output, high inner resistance, and long starting time.

Covalent organic framework-engineered polydopamine nanoplatform for multimodal imaging-guided tumor photothermal-chemotherapy.

A covalent organic framework (COF)-engineered polydopamine core-shell nanoplatform (PDA@COF) was developed. The ultrasmall pores and abundant functional sites of the COF endowed the nanoplatform with enhanced drug loading capacity and diminished drug leakage effect. Multimodal imaging-guided photothermal chemo-synergistic tumor-targeted therapy was realized after rational functionalization. This work offers new insights for developing COF-based multifunctional theranostic systems.

Characterization of genotype-phenotype correlation with MORC2 mutated Axonal Charcot-Marie-Tooth disease in a cohort of Chinese patients.

BACKGROUND: Charcot-Marie-Tooth (CMT) disease is an exciting field of study, with a growing number of causal genes and an expanding phenotypic spectrum. The microrchidia family CW-type zinc finger 2 gene (MORC2) was newly identified as a causative gene of CMT2Z in 2016. We aimed to describe the phenotypic-genetic spectrum of MORC2-related diseases in the Chinese population. METHODS: With the use of Sanger sequencing and Next Generation Sequencing (NGS) technologies, we screened a cohort of 284 unrelated Chinese CMT2 families. Pathogenicity assessments of MORC2 variants were interpreted according to the ACMG guidelines. Potential pathogenic variants were confirmed by Sanger sequencing. RESULTS: We identified 4 different heterozygous MORC2 mutations in four unrelated families, accounting for 1.4% (4/284). A novel mutation c.1397A>G p. D466G was detected in family 1 and all affected patients presented with later onset axonal CMT with hyperCKemia. The patient in family 2 showed a spinal muscular atrophy (SMA)-like disease with cerebellar hypoplasia and mental retardation, with a hot spot de novo mutation c.260C>T p. S87L. The twin sisters in family 3 were identified as having the most common mutation c.754C>T p. R252W and suffered from axonal motor neuropathy with high variability in disease severity and duration. The patient in family 4 developed an early onset axonal motor and sensory neuropathy, with a reported mutation c.1220G>A p.C407Y. All identified mutations associated with MORC2-related neuropathies are localized in the N-terminal ATPase module. CONCLUSIONS: Our study confirmed that MORC2-related neuropathies exist in the Chinese population at a relatively high mutation rate. We revealed a complex genotype-phenotype correlation with MORC2 mutations. This report adds a new piece to the puzzle of the genetics of CMT and contributes to a better understanding of the disease mechanisms.

A study on separation and extraction of four main alkaloids in Macleaya cordata (Willd) R. Br. with strip dispersion hybrid liquid membrane.

A technique based on strip dispersion hybrid liquid membrane was developed for the separation and extraction of four main alkaloids from fruits of Macleaya cordata (Willd) R. Br. A microporous polypropylene membrane impregnated with an organic membrane solution comprised the heart of the strip dispersion hybrid liquid membrane system. The membrane solution was made by dissolving a cationic carrier, di-(2-ethylhexyl) phosphoric acid in an inexpensive, less toxic membrane solvent, kerosene. The transport of alkaloids from an aqueous feed solution through the membrane to a strip dispersion phase was driven by the concentration gradient of H(+) and facilitated by di-(2-ethylhexyl) phosphoric acid. The effects of the extraction time and reuse times of the membrane, the strip solution composition, the carrier concentration, the volume ratio of the aqueous strip solution to the organic membrane solution, and the flow rates of the feed solution and the strip dispersion phase on the transport of alkaloids were investigated. Under the optimal conditions, the permeability coefficients obtained for the four main alkaloids allocryptopine, protopine, sanguinarine, and chelerythrine were 1.66, 1.99, 2.98, and 3.06 x 10(-4) cm/s, and the transport efficiencies were as high as 68, 77, 83, and 85%, respectively.

Interpretation of adhesion behaviors between bacteria and modified basalt fiber by surface thermodynamics and extended DLVO theory.

Surface properties of carrier are critical for microorganism initial adhesion and biofilm formation in wastewater treatment. Until now, there are few reports on adhesion behaviors between bacteria and inorganic fiber surface. In this study, inorganic basalt fiber (BF) was modified with cationic polyacrylamide (CPAM) to make surface more hydrophilic and positively charged. The initial adhesion behaviors of BF modified with CPAM (CMBF) were interpreted by thermodynamics and extended Derjaguin-Landau-Verwey-Overbeek (DLVO) theory. According to the total interaction energy calculated by the extended DLVO theory, insurmountable energy barrier between BF and Escherichia coli (E. coli) made irreversible adhesion unachievable due to hydrophobicity and electronegativity of BF, but allowed reversible adhesion at second minimum. By contrast, the energy barrier between CMBF and E. coli could be overcome allowing irreversible bacterial adhesion and thus a huge amount of biomass because of hydrophilicity and electropositivity of CMBF. The results showed the total interaction energies were dominated by Lewis acid-base and electrostatic interactions and coating BF with CPAM could promote initial bacterial adhesion on carrier surface. Overall, the extended DLVO theory provides a comprehensive tool to interpret initial adhesion behaviors between bacteria and inorganic fibers.