Fluorographene: a two-dimensional counterpart of Teflon.

A stoichiometric derivative of graphene with a fluorine atom attached to each carbon is reported. Raman, optical, structural, micromechanical, and transport studies show that the material is qualitatively different from the known graphene-based nonstoichiometric derivatives. Fluorographene is a high-quality insulator (resistivity >10(12) Ω) with an optical gap of 3 eV. It inherits the mechanical strength of graphene, exhibiting a Young's modulus of 100 N m(-1) and sustaining strains of 15%. Fluorographene is inert and stable up to 400 °C even in air, similar to Teflon.

Nitrogen-doped titania nanosheets towards visible light response.

Nitrogen-doped titania nanosheets with visible light response were synthesized by exfoliating a layered titanate with homogeneous nitrogen doping.

Superiority of Graphene over Polymer Coatings for Prevention of Microbially Induced Corrosion.

Prevention of microbially induced corrosion (MIC) is of great significance in many environmental applications. Here, we report the use of an ultra-thin, graphene skin (Gr) as a superior anti-MIC coating over two commercial polymeric coatings, Parylene-C (PA) and Polyurethane (PU). We find that Nickel (Ni) dissolution in a corrosion cell with Gr-coated Ni is an order of magnitude lower than that of PA and PU coated electrodes. Electrochemical analysis reveals that the Gr coating offers ~10 and ~100 fold improvement in MIC resistance over PU and PA coatings respectively. This finding is remarkable considering that the Gr coating (1-2 nm) is ~25 and ~4000 times thinner than the PA (40-50 nm), and PU coatings (20-80 µm), respectively. Conventional polymer coatings are either non-conformal when deposited or degrade under the action of microbial processes, while the electro-chemically inert graphene coating is both resistant to microbial attack and is extremely conformal and defect-free. Finally, we provide a brief discussion regarding the effectiveness of as-grown vs. transferred graphene films for anti-MIC applications. While the as-grown graphene films are devoid of major defects, wet transfer of graphene is shown to introduce large scale defects that make it less suitable for the current application.

Contamination-free and damage-free patterning of single-walled carbon nanotube transparent conductive films on flexible substrates.

High quality patterning of single-walled carbon nanotube (SWCNT) transparent conductive films is achieved by a lift-off aluminum interlayer method, which has the advantage of resulting in contamination-free and damage-free SWCNTs. The obtained patterns preserve the electrical properties of the SWCNT films and show promising applications in flexible high frequency electronic and display devices.

Incorporation of graphenes in nanostructured TiO(2) films via molecular grafting for dye-sensitized solar cell application.

This paper presents a systematic investigation on the incorporation of chemical exfoliation graphene sheets (GS) in TiO(2) nanoparticle films via a molecular grafting method for dye-sensitized solar cells (DSSCs). By controlling the oxidation time in the chemical exfoliation process, both high conductivity of reduced GS and good attachment of TiO(2) nanoparticles on the GS were achieved. Uniform GS/TiO(2) composite films with large areas on conductive glass were prepared by electrophoretic deposition, and the incorporation of GS significantly improved the conductivity of the TiO(2) nanoparticle film by more than 2 orders of magnitude. Moreover, the power conversion efficiency for DSSC based on GS/TiO(2) composite films is more than 5 times higher than that based on TiO(2) alone, indicating that the incorporation of GS is an efficient means for enhancing the photovoltaic (PV) performance. The better PV performance of GS/TiO(2) DSSC is also attributed to the better dye loading of GS/TiO(2) film than that of TiO(2) film. The effect of GS content on the PV performances was also investigated. It was found that the power conversion efficiency increased first and then decreased with the increasing of GS concentration due to the decrease in the transmittance at high GS content. Further improvements can be expected by fully optimizing fabrication conditions and device configuration, such as increasing dye loading via thicker films. The present synthetic strategy is expected to lead to a family of composites with designed properties.