Graphene Oxide-Based Nanomaterials: An Insight into Retinal Prosthesis.

Retinal prosthesis has recently emerged as a treatment strategy for retinopathies, providing excellent assistance in the treatment of age-related macular degeneration (AMD) and retinitis pigmentosa. The potential application of graphene oxide (GO), a highly biocompatible nanomaterial with superior physicochemical properties, in the fabrication of electrodes for retinal prosthesis, is reviewed in this article. This review integrates insights from biological medicine and nanotechnology, with electronic and electrical engineering technological breakthroughs, and aims to highlight innovative objectives in developing biomedical applications of retinal prosthesis.

3D hybrid printing platform for auricular cartilage reconstruction.

As scaffolds approach dimensions that are of clinical relevance, mechanical integrity and distribution becomes an important factor to the overall success of the implant. Hydrogels often lack the structural integrity and mechanical properties for use in vivo or handling. The inclusion of a structural support during the printing process, referred to as hybrid printing, allows the implant to retain structure and protect cells during maturation without needing to compromise its biological performance. In this study, scaffolds for the purpose of auricular cartilage reconstruction were evaluated via a hybrid printing approach using methacrylated Gelatin (GelMA) and Hyaluronic acid (HAMA) as the cell-laden hydrogel, Polycaprolactone (PCL) as structural support and Lutrol F-127 as sacrificial material. Furthermore, printing parameters such as nozzle diameter, strand spacing and filament orientation scaffolds were investigated. Compression and bending tests showed that increasing nozzle sizes decrease the compressive modulus of printed scaffolds, with up to 82% decrease in modulus when comparing between a 400 µm and 200 µm sized nozzle tip at the same strand spacing. On the contrary, strand spacing and orientation influences mainly the bending modulus due to the greater porosity and changes in pore size area. Using a 400 µm sized nozzle, scaffolds fabricated have a measured compression and bending modulus in the range similar to the native cartilage. The viability and proliferation of human mesenchymal stem cells delivered within the bioink was not affected by the printing process. Using results obtained from mechanical testing, a scaffold with matching mechanical properties across six distinct regions mimicking the human auricular cartilage can be completed in one single print process. The use of PCL and GelMA-HAMA as structural support and cell-laden hydrogel respectively are an excellent combination to provide tailored mechanical integrity, while maintaining porosity and protection to cells during differentiation.

Poly(3,4-ethylenedioxythiophene):dextran sulfate (PEDOT:DS) - a highly processable conductive organic biopolymer.

A novel water-dispersible conducting polymer analogous to poly(3,4-dioxythiophene):polystyrene sulfonate (PEDOT:PSS) has been chemically synthesized in a single reaction in high yield. PEDOT:DS, a new member of the polythiophene family, is composed of a complex between PEDOT and the sulfonated polysaccharide polyanion dextran sulfate. Drop-cast films of aqueous suspensions of the material display a native conductivity of up to 7 ± 1 S cm(-1), increasing to 20 ± 2 S cm(-1) after treatment with ethylene glycol and thermal annealing. Mass ratios of the precursors NaDS and EDOT were varied from 5:1 to 2:1 and a decrease in the NaDS:EDOT ratio produces tougher, less hygroscopic films of higher conductivity. Ultraviolet-visible spectroelectrochemistry yields spectra typical of PEDOT complexes. Cyclic voltammetry reveals that PEDOT:DS is electrochemically active from -1.0 to 0.8 V vs. Ag/Ag(+) in acetonitrile, with similar characteristics to PEDOT:PSS. Water dispersions of PEDOT:DS are successfully processed by drop casting, spray coating, inkjet printing and extrusion printing. Furthermore, laser etching of dried films allows the creation of patterns with excellent definition. To assess the cytotoxicity of PEDOT:DS, L-929 cells were cultured with a polymer complex concentration range of 0.002 to 0.2 g l(-1) in cell culture medium. No significant difference is found between the proliferation rates of L-929 cells exposed to PEDOT:DS and those in plain medium after 96h. However, PEDOT:PSS shows around 25% less cell growth after 4 days, even at the lowest concentration. Taken together, these results suggest PEDOT:DS has exceptional potential as an electromaterial for the biointerface.