Quantitative biophysical analysis defines key components modulating recruitment of the GTPase KRAS to the plasma membrane.

The gene encoding the GTPase KRAS is frequently mutated in pancreatic, lung, and colorectal cancers. The KRAS fraction in the plasma membrane (PM) correlates with activation of the mitogen-activated protein kinase (MAPK) pathway and subsequent cellular proliferation. Understanding KRAS's interaction with the PM is challenging given the complexity of the cellular environment. To gain insight into key components necessary for KRAS signal transduction at the PM, we used synthetic membranes such as liposomes and giant unilamellar vesicles. Using surface plasmon resonance (SPR) spectroscopy, we demonstrated that KRAS and Raf-1 proto-oncogene Ser/Thr kinase (RAF1) domains interact with these membranes primarily through electrostatic interactions with negatively charged lipids reinforced by additional interactions involving phosphatidyl ethanolamine and cholesterol. We found that the RAF1 region spanning RBD through CRD (RBDCRD) interacts with the membrane significantly more strongly than the isolated RBD or CRD domains and synergizes KRAS partitioning to the membrane. We also found that calmodulin and phosphodiesterase 6 delta (PDE6δ), but not galectin3 previously proposed to directly interact with KRAS, passively sequester KRAS and prevent it from partitioning into the PM. RAF1 RBDCRD interacted with membranes preferentially at nonraft lipid domains. Moreover, a C-terminal O-methylation was crucial for KRAS membrane localization. These results contribute to a better understanding of how the KRAS-membrane interaction is tuned by multiple factors whose identification could inform drug discovery efforts to disrupt this critical interaction in diseases such as cancer.

Zeta potential: a case study of cationic, anionic, and neutral liposomes.

Zeta potential is often used to approximate a nanoparticle's surface charge, i.e., cationic, anionic, or neutral character, and has become a standard characterization technique to evaluate nanoparticle surfaces. While useful, zeta potential values provide only very general conclusions about surface charge character. Without a thorough understanding of the measurement parameters and limitations of the technique, these values can become meaningless. This case study attempts to explore the sensitivity of zeta potential measurement using specifically formulated cationic, anionic, and neutral liposomes. This study examines zeta potential dependence on pH and ionic strength, resolving power, and highlights the sensitivity of zeta potential to charged liposomes. Liposomes were prepared with cholesterol, 1,2-distearoyl-sn-glycero-3-phosphocholine (DSPC), and varying amounts of 1,2-dioleoyl-3-trimethylammonium-propane (DOTAP) or 1,2-dioleoyl-sn-glycero-3-phospho-L-serine (DOPS). A strong linear relationship was noted between zeta potential values and the mole percentage of charged lipids within a liposome (e.g., cationic DOTAP or anionic DOPS). This finding could be used to formulate similar liposomes to a specific zeta potential, potentially of importance for systems sensitive to highly charged species. In addition, cationic and anionic liposomes were titrated with up to two mole percent of the neutral lipid 1,2-distearoyl-sn-glycero-3-phosphoethanolamine-N-[methoxy(polyethylene glycol)-2000] (lipid-PEG; LP). Very small amounts of the lipid-PEG (<0.2 mol%) were found to impart stability to the DOTAP- and DOPS-containing liposomes without significantly affecting other physicochemical properties of the formulation, providing a simple approach to making stable liposomes with cationic and anionic surface charge.

Anticoagulants Influence the Performance of In Vitro Assays Intended for Characterization of Nanotechnology-Based Formulations.

The preclinical safety assessment of novel nanotechnology-based drug products frequently relies on in vitro assays, especially during the early stages of product development, due to the limited quantities of nanomaterials available for such studies. The majority of immunological tests require donor blood. To enable such tests one has to prevent the blood from coagulating, which is usually achieved by the addition of an anticoagulant into blood collection tubes. Heparin, ethylene diamine tetraacetic acid (EDTA), and citrate are the most commonly used anticoagulants. Novel anticoagulants such as hirudin are also available but are not broadly used. Despite the notion that certain anticoagulants may influence assay performance, a systematic comparison between traditional and novel anticoagulants in the in vitro assays intended for immunological characterization of nanotechnology-based formulations is currently not available. We compared hirudin-anticoagulated blood with its traditional counterparts in the standardized immunological assay cascade, and found that the type of anticoagulant did not influence the performance of the hemolysis assay. However, hirudin was more optimal for the complement activation and leukocyte proliferation assays, while traditional anticoagulants citrate and heparin were more appropriate for the coagulation and cytokine secretion assays. The results also suggest that traditional immunological controls such as lipopolysaccharide (LPS ) are not reliable for understanding the role of anticoagulant in the assay performance. We observed differences in the test results between hirudin and traditional anticoagulant-prepared blood for nanomaterials at the time when no such effects were seen with traditional controls. It is, therefore, important to recognize the advantages and limitations of each anticoagulant and consider individual nanoparticles on a case-by-case basis.

Quantitative analysis of PEG-functionalized colloidal gold nanoparticles using charged aerosol detection.

Surface characteristics of a nanoparticle, such as functionalization with polyethylene glycol (PEG), are critical to understand and achieve optimal biocompatibility. Routine physicochemical characterization such as UV-vis spectroscopy (for gold nanoparticles), dynamic light scattering, and zeta potential are commonly used to assess the presence of PEG. However, these techniques are merely qualitative and are not sensitive enough to distinguish differences in PEG quantity, density, or presentation. As an alternative, two methods are described here which allow for quantitative measurement of PEG on PEGylated gold nanoparticles. The first, a displacement method, utilizes dithiothreitol to displace PEG from the gold surface. The dithiothreitol-coated gold nanoparticles are separated from the mixture via centrifugation, and the excess dithiothreitol and dissociated PEG are separated through reversed-phase high-performance liquid chromatography (RP-HPLC). The second, a dissolution method, utilizes potassium cyanide to dissolve the gold nanoparticles and liberate PEG. Excess CN(-), Au(CN)2 (-), and free PEG are separated using RP-HPLC. In both techniques, the free PEG can be quantified against a standard curve using charged aerosol detection. The displacement and dissolution methods are validated here using 2-, 5-, 10-, and 20-kDa PEGylated 30-nm colloidal gold nanoparticles. Further value in these techniques is demonstrated not only by quantitating the total PEG fraction but also by being able to be adapted to quantitate the free unbound PEG and the bound PEG fractions. This is an important distinction, as differences in the bound and unbound PEG fractions can affect biocompatibility, which would not be detected in techniques that only quantitate the total PEG fraction.

Analyzing the influence of PEG molecular weight on the separation of PEGylated gold nanoparticles by asymmetric-flow field-flow fractionation.

Polyethylene glycol (PEG) is an important tool for increasing the biocompatibility of nanoparticle therapeutics. Understanding how these potential nanomedicines will react after they have been introduced into the bloodstream is a critical component of the preclinical evaluation process. Hence, it is paramount that better methods for separating, characterizing, and analyzing these complex and polydisperse formulations are developed. We present a method for separating nominal 30-nm gold nanoparticles coated with various molecular weight PEG moieties that uses only phosphate-buffered saline as the mobile phase, without the need for stabilizing surfactants. The optimized asymmetric-flow field-flow fractionation technique using in-line multiangle light scattering, dynamic light scattering, refractive index, and UV-vis detectors allowed successful separation and detection of a mixture of nanoparticles coated with 2-, 5-, 10-, and 20-kDa PEG. The particles coated with the larger PEG species (10 and 20 kDa) were eluted at times significantly earlier than predicted by field-flow fractionation theory. This was attributed to a lower-density PEG shell for the higher molecular weight PEGylated nanoparticles, which allows a more fluid PEG surface that can be greater influenced by external forces. Hence, the apparent particle hydrodynamic size may fluctuate significantly depending on the overall density of the stabilizing surface coating when an external force is applied. This has considerable implications for PEGylated nanoparticles intended for in vivo application, as nanoparticle size is important for determining circulation times, accumulation sites, and routes of excretion, and highlights the importance and value of the use of secondary size detectors when one is working with complex samples in asymmetric-flow field-flow fractionation.

Induction of oxidative stress by Taxol® vehicle Cremophor-EL triggers production of interleukin-8 by peripheral blood mononuclear cells through the mechanism not requiring de novo synthesis of mRNA.

Understanding the ability of cytotoxic oncology drugs, and their carriers and formulation excipients, to induce pro-inflammatory responses is important for establishing safe and efficacious formulations. Literature data about cytokine response induction by the traditional formulation of paclitaxel, Taxol®, are controversial, and no data are available about the pro-inflammatory profile of the nano-albumin formulation of this drug, Abraxane®. Herein, we demonstrate and explain the difference in the cytokine induction profile between Taxol® and Abraxane®, and describe a novel mechanism of cytokine induction by a nanosized excipient, Cremophor EL, which is not unique to Taxol® and is commonly used in the pharmaceutical industry for delivery of a wide variety of small molecular drugs. FROM THE CLINICAL EDITOR: Advances in nanotechnology have enabled the production of many nano-formulation drugs. The cellular response to drugs has been reported to be different between traditional and nano-formulations. In this article, the authors investigated and compared cytokine response induction profiles between Taxol® and Abraxane®. The findings here provided further understanding to create drugs with better safety profiles.

Ion Quantitation in Liposomal Products Using RP-HPLC with Charged Aerosol Detection.

Ion concentration in liposomal drugs is important for drug stability and drug release profile. However, quantifying ion concentration in liposomal drugs is challenging due to the absence of chromophores or fluorophores of ions and the efficiency of their release from the liposome structure. To address these issues, a method based on reversed-phase high-performance liquid chromatography (RP-HPLC) coupled with a charged aerosol detector (CAD) has been developed to determine total, internal, and external ions in drug-loaded liposomal products. In this protocol, we focused on the quantitation of ammonium and sulfate ions in liposomal products, using generic PEGylated liposomal doxorubicin as an example. This method can be extended to calcium, acetate, and other ions in different liposomal formulations with slight modifications.

Nano-mupirocin as tumor-targeted antibiotic: Physicochemical, immunotoxicological and pharmacokinetic characterization, and effect on gut microbiome.

Nano-mupirocin is a PEGylated nano-liposomal formulation of the antibiotic mupirocin, undergoing evaluation for treating infectious diseases and intratumor bacteria. Intratumoral microbiota play an important role in the regulation of tumor progression and therapeutic efficacy. However, antibiotic use to target intratumoral bacteria should be performed in a way that will not affect the gut microbiota, found to enable the efficacy of cancer treatments. Nano-mupirocin may offer such a selective treatment. Herein, we demonstrate the ability of Nano-mupirocin to successfully target tumor-residing Fusobacterium nucleatum without an immediate effect on the gut microbiome. In-depth characterization of this novel formulation was performed, and the main findings include: (i). the pharmacokinetic analysis of mupirocin administered as Nano-mupirocin vs mupirocin lithium (free drug) demonstrated that most of the Nano-mupirocin in plasma is liposome associated; (ii). microbiome analysis of rat feces showed no significant short-term difference between Nano-mupirocin, mupirocin lithium and controls; (iii). Nano-mupirocin was active against intratumoral F. nucleatum, a tumor promoting bacteria that accumulates in tumors of the AT3 mice model of breast cancer. These data suggest the ability of Nano-mupirocin to target tumor residing and promoting bacteria.

The importance of nanoparticle physicochemical characterization for immunology research: What we learned and what we still need to understand.

Physicochemical characterization of nanoparticles intended for immunology research is important as it helps explain the observed immunological effects. More importantly, it relates the physicochemical properties with the immunological properties to draw meaningful conclusions. There are many physicochemical parameters, with each having numerous analytical techniques and instrumentation to measure them. Thus, where to begin can be challenging even for the experienced scientist. This paper aims to provide guidance to the immunology scientist on how best to characterize their nanoparticles. A step-by-step guide for the physicochemical characterization of liposomal formulations, based on the FDA's guidance for industry for Liposome Drug Products, is provided. Eight critical quality attributes have been identified and for each, the methodology and the physicochemical questions one should consider are discussed. This chapter also addresses common physicochemical characterization mistakes and concludes with a perspective on the type of measurements needed to address current physicochemical characterization gaps and challenges.

Biological assessment of triazine dendrimer: toxicological profiles, solution behavior, biodistribution, drug release and efficacy in a PEGylated, paclitaxel construct.

The physicochemical characteristics, in vitro properties, and in vivo toxicity and efficacy of a third generation triazine dendrimer bearing approximately nine 2 kDa polyethylene glycol chains and twelve ester linked paclitaxel groups are reported. The hydrodynamic diameter of the neutral construct varies slightly with aqueous solvent ranging from 15.6 to 19.4 nm. Mass spectrometry and light scattering suggest radically different molecular weights with the former approximately 40 kDa mass consistent with expectation, and the latter 400 kDa mass consistent with a decameric structure and the observed hydrodynamic radii. HPLC can be used to assess purity as well as paclitaxel release, which is insignificant in organic solvents or aqueous solutions at neutral and low pH. Paclitaxel release occurs in vitro in human, rat, and mouse plasma and is nonlinear, ranging from 7 to 20% cumulative release over a 48 h incubation period. The construct is 2-3 orders of magnitude less toxic than Taxol by weight in human hepatocarcinoma (Hep G2), porcine renal proximal tubule (LLC-PK1), and human colon carcinoma (LS174T) cells, but shows similar cytotoxicity to Abraxane in LS174T cells. Both Taxol and the construct appear to induce caspase 3-dependent apoptosis. The construct shows a low level of endotoxin, is not hemolytic and does not induce platelet aggregation in vitro, but does appear to reduce collagen-induced platelet aggregation in vitro. Furthermore, the dendrimer formulation slightly activates the complement system in vitro due most likely to the presence of trace amounts (<1%) of free paclitaxel. An animal study provided insight into the maximum tolerated dose (MTD) wherein 10, 25, 50, and 100 mg of paclitaxel/kg of construct or Abraxane were administered once per week for three consecutive weeks to non tumor bearing athymic nude mice. The construct showed in vivo toxicity comparable to that of Abraxane. Both formulations were found to be nontoxic at the administered doses, and the dendrimer had an acute MTD greater than the highest dose administered. In a prostate tumor model (PC-3-h-luc), efficacy was observed over 70 days with an arrest of tumor growth and lack of luciferase activity observed in the twice treated cohort.

Ion quantification in liposomal drug products using high performance liquid chromatography.

A simple, straightforward analytical method based on liquid chromatography has been optimized to quantify total, internal, and external ions in drug-loaded liposomal products. The quantification of ammonium and sulfate ions in Doxil is detailed; although, the methodology has been extrapolated to quantitate a variety of ions, including calcium, acetate, and others in several different liposomal formulations. Total ion concentrations were measured after disruption of the liposome via lyophilization, to liberate all components. External ion concentrations were made following membrane centrifugation, without disruption of the liposome structure, where the permeate fraction was analyzed for external ion quantities. The internal ion fraction was derived from mass balance of the total and external ion measurements. High performance liquid chromatography (HPLC), equipped with different separation columns, and coupled to a charged aerosol detector, was employed for all ion quantifications. The analytical measurements were confirmed using simple stoichiometry based on the drug crystallization of doxorubicin within the liposome interior. The method presented herein is quick, highly accurate, and has significantly improved lower limits of detection and quantification over other traditional methods. As more follow-on versions of Doxil are being developed, this facile approach to ion quantitation can be used to help establish compositional similarity to the reference listed drug.

Rapid distribution of liposomal short-chain ceramide in vitro and in vivo.

Ceramide, an endogenous sphingolipid, has demonstrated antieoplastic activity in vitro and in vivo. However, the chemotherapeutic utility of ceramide is limited because of its insolubility. To increase the solubility of ceramide, liposomal delivery systems have been used. The objective of the present study was to characterize the pharmacokinetics and tissue distribution of C6-ceramide and control (non-C6-ceramide) nanoliposomes in rats, using [14C]C6-ceramide and [3H]distearylphosphatidylcholine (DSPC) as tracers of the ceramide and liposome components, respectively. Ceramide liposomes were administered at 50 mg of liposomes/kg by jugular vein to female Sprague-Dawley rats. The apparent volume of distribution (Vd) of [3H]DSPC was approximately 50 ml/kg, suggesting that the liposomes were confined to the systemic circulation. In contrast, the Vd of [14C]C6-ceramide was 20-fold greater than that of liposomes, indicating extensive tissue distribution. This high Vd of [14C]C6-ceramide in relation to that of [3H]DSPC suggests that ceramide and liposomes distribute independently of each other. This disparate disposition was confirmed by tissue distribution studies, in which [14C]C6-ceramide exhibited rapid tissue accumulation compared with to [3H]DSPC. Examination of ceramide liposome blood compartmentalization in vitro also demonstrated divergent partitioning, with liposomes being confined to the plasma fraction and ceramide rapidly equilibrating between red blood cell and plasma fractions. A bilayer exchange mechanism for ceramide transfer is proposed to explain the results of the present study, as well as give insight into the documented antineoplastic efficacy of short-chain ceramide liposomes. Our studies suggest that this nanoscale PEGylated drug delivery system for short-chain ceramide offers rapid tissue distribution without adverse effects for a neoplastic-selective, insoluble agent.

HER2-specific affibody-conjugated thermosensitive liposomes (Affisomes) for improved delivery of anticancer agents.

Thermosensitive liposomes are attractive vehicles for the delivery and release of drugs to tumors. To improvethe targeting efficacy for breast cancer treatment, an 8.3-kDa HER2-specific Affibody molecule (Z(HER2:342)-Cys) was conjugated to the surface of liposomes. The effects of this modification on physical characteristics and stability of the resulting nanoparticles denoted as "Affisomes" were investigated. Thermosensitive small unilamellar vesicle (SUV) liposomes of (80-100 nm) a diameter consisting of dipalmitoyl phosphatidylcholine (DPPC, Tm 41 degrees C) as the matrix lipid and a maleimide-conjugated pegylated phospholipid (DSPE-MaL-PEG2000) were prepared by probe sonication. Fluorescent probes were incorporated into liposomes for biophysical and/or biochemical analysis and/or triggered-release assays. Affibody was conjugated to these liposomes via its C-terminal cysteine by incubation in the presence of a reducing agent (e.g., tributylphosphine) for 16-20 hours under an argon atmosphere. Lipid-conjugated affibody molecule was visible as an 11.3-kDa band on a 4-12% Bis/Tris gel under reducing conditions. Affibody conjugation yields were approximately 70% at a protein-lipid ratio of 20 microg/mg, with an average number of 200 affibody molecules per Affisome. Affibody conjugation to thermosensitive liposomes did not have any significant effect on the hydrodynamic size distribution of the liposomes. Thermosensitivity of Affisomes was determined by monitoring the release of entrapped calcein (a water-soluble fluorescent probe, lambdaex/em 490/515 nm) as a function of temperature. Calcein was released from Affisomes (thermosensitive liposomes with affibody-Targeted SUV) as well as nontargeted SUV (thermosensitive liposomes without affibody) in a temperature-dependent manner, with optimal leakage (90-100%) at 41 degrees C. In contrast, liposomes prepared from Egg phosphatidyl choline (Egg PC, Tm approximately 0 degrees C) under similar conditions released only 5-10% calcein at 41 degrees C. Affisomes, when stored at room temperature, retained > 90% entrapped calcein up to 7 days. Moreover, incubation of liposomes in phosphate-buffered saline, supplemented with 10% heat-inactivated serum (fetal bovine serum) did not result in a destabilization of liposomes. Therefore, Affisomes present promising, novel drug-delivery candidates for breast cancer targeting.

PEG Quantitation Using Reversed-Phase High-Performance Liquid Chromatography and Charged Aerosol Detection.

This chapter describes a method for the quantitation of polyethylene glycol (PEG) in PEGylated colloidal gold nanoparticles using a reversed-phase high-performance liquid chromatography (RP-HPLC) with charged aerosol detection. The method can be used to calculate the total PEG on the nanoparticle, as well as the bound and free unbound PEG fractions after a simple centrifugation step. This is a significant distinction as the bound PEG fraction affects biocompatibility, circulation time, and overall nanoparticle efficacy. PEG quantitation can be achieved through two methods, one involving the dissolution of colloidal gold nanoparticles by potassium cyanide (KCN) and the other by displacement of PEG by dithiothreitol (DTT). The methods outlined herein were applied to 30 nm colloidal gold grafted with 20 kDa PEG, but they can be easily adapted to any size colloidal gold nanoparticle and PEG chain length.

Quantitation of Surface Coating on Nanoparticles Using Thermogravimetric Analysis.

Nanoparticles are critical components in nanomedicine and nanotherapeutic applications. Some nanoparticles, such as metallic nanoparticles, consist of a surface coating or surface modification to aid in its dispersion and stability. This surface coating may affect the behavior of nanoparticles in a biological environment, thus it is important to measure. Thermogravimetric analysis (TGA) can be used to determine the amount of coating on the surface of the nanoparticle. TGA experiments run under inert atmosphere can also be used to determine residual metal content present in the sample. In this chapter, the TGA technique and experimental method are described.

Synergistic combination therapy with nanoliposomal C6-ceramide and vinblastine is associated with autophagy dysfunction in hepatocarcinoma and colorectal cancer models.

Autophagy, a catabolic survival pathway, is gaining attention as a potential target in cancer. In human liver and colon cancer cells, treatment with an autophagy inducer, nanoliposomal C6-ceramide, in combination with the autophagy maturation inhibitor, vinblastine, synergistically enhanced apoptotic cell death. Combination treatment resulted in a marked increase in autophagic vacuole accumulation and decreased autophagy maturation, without diminution of the autophagy flux protein P62. In a colon cancer xenograft model, a single intravenous injection of the drug combination significantly decreased tumor growth in comparison to the individual treatments. Most importantly, the combination treatment did not result in increased toxicity as assessed by body weight loss. The mechanism of combination treatment-induced cell death both in vitro and in vivo appeared to be apoptosis. Supportive of autophagy flux blockade as the underlying synergy mechanism, treatment with other autophagy maturation inhibitors, but not autophagy initiation inhibitors, were similarly synergistic with C6-ceramide. Additionally, knockout of the autophagy protein Beclin-1 suppressed combination treatment-induced apoptosis in vitro. In conclusion, in vitro and in vivo data support a synergistic antitumor activity of the nanoliposomal C6-ceramide and vinblastine combination, potentially mediated by an autophagy mechanism.

Tumor necrosis factor interaction with gold nanoparticles.

We report on a systematic investigation of molecular conjugation of tumor necrosis factor-α (TNF) protein onto gold nanoparticles (AuNPs) and the subsequent binding behavior to its antibody (anti-TNF). We employ a combination of physical and spectroscopic characterization methods, including electrospray-differential mobility analysis, dynamic light scattering, polyacrylamide gel electrophoresis, attenuated total reflectance-Fourier transform infrared spectroscopy, fluorescence assay, and enzyme-linked immunosorbent assay. The native TNF used in this study exists in the active homotrimer configuration prior to conjugation. After binding to AuNPs, the maximum surface density of TNF is (0.09 ± 0.02) nm(-2) with a binding constant of 3 × 10(6) (mol L(-1))(-1). Dodecyl sulfate ions induce desorption of monomeric TNF from the AuNP surface, indicating a relatively weak intermolecular binding within the AuNP-bound TNF trimers. Anti-TNF binds to both TNF-conjugated and citrate-stabilized AuNPs, showing that non-specific binding is significant. Based on the number of anti-TNF molecules adsorbed, a substantially higher binding affinity was observed for the TNF-conjugated surface. The inclusion of thiolated polyethylene glycol (SH-PEG) on the AuNPs inhibits the binding of anti-TNF, and the amount of inhibition is related to the number ratio of surface bound SH-PEG to TNF and the way in which the ligands are introduced. This study highlights the challenges in quantitatively characterizing complex hybrid nanoscale conjugates, and provides insight on TNF-AuNP formation and activity.

Lipid component quantitation by thin layer chromatography.

This chapter describes a thin layer chromatography (TLC) method for the quantitation of various lipids (such as phospholipids, sphingolipids, acylglycerols, and fatty acids) in lipid-based nanoparticle formulations such as liposomes and nanoemulsions. We illustrate this technique to quantify C6-ceramide (N-hexanoyl-D: -erythro-sphingosine) in a nanoemulsion formulation. C6-ceramide is a powerful chemotherapeutic that is poorly soluble in aqueous buffers.

Detoxification of gold nanorods by treatment with polystyrenesulfonate.

We address an outstanding issue associated with the biocompatibility of gold nanorods (GNRs), a promising agent for biomedical imaging and theragnostics. GNRs are typically prepared in the presence of cetyltrimethylammonium bromide (CTAB), a cationic surfactant whose rigorous removal is necessary due to its cytotoxicity and membrane-compromising properties. CTAB-stabilized GNRs can be partially purified by treatment with polystyrenesulfonate (PSS), an anionic polyelectrolyte often used as a surrogate peptizing agent, followed by chloroform extraction and ultrafiltration with minimal loss of dispersion stability. However, in vitro cytotoxicity assays of PSS-coated GNRs revealed IC(50) values in the low to submicromolar range, with subsequent studies indicating the source of toxicity to be associated with a persistent PSS-CTAB complex. Further exchange of CTAB-laden PSS with fresh polyelectrolyte greatly improves biocompatibility, to the extent that 85 microg/mL of "CTAB-free" GNRs (the highest level evaluated) has comparable toxicity to a standard phosphate buffer solution. Ironically, PSS is not effective by itself at stabilizing GNRs in CTAB-depleted suspensions: while useful as a detergent for GNR detoxification, it should be replaced by more robust coatings for long-term stability under physiological conditions.