Aspects of glass and hybridization protocols for bonding of fiber posts to root dentine.

This study evaluated bond strength of glass fiber posts to root dentin using push-out (PO) and diametral compression (DC), testing glycolic acid as a conditioner and varying dentin moisture. An additional aim was to test whether DC can be an alternative test to PO for bond strength assessment. Eighty bovine teeth were divided into eight groups (n = 10) defined by the use of either 37% glycolic acid or 37% phosphoric acid (PA) on moist or wet dentin before bonding with either Adapter SingleBond/RelyX ARC or One Step Plus/Duo-Link Bisco. Each tooth provided discs with an internal diameter of 2 mm, external diameter of 5 mm, and height of 2 mm, which underwent PO and DC. Finite element analysis (FEA) was carried out on 3D models. When analyzing PO results through linear regression, the highest values of bond strength were observed using glycolic acid on wet dentin in the cervical and middle thirds of the teeth. Analyzing DC results, the only statistical influence on values was the dental thirds. The scatterplot of the DC results and the PO bond strength values indicated no relationship between the results of the two tests (r = 0.03; p = 0.64). PO test detected more sensitive changes in bond strength values than DC.

Hard drugs use and tooth wear: a scoping review.

OBJECTIVES: This study aims to map evidence on the relationship between hard drug use and dental wear. The scoping review is guided by the question: What is the relationship between hard drug consumption and dental wear? MATERIALS AND METHODS: Adhering to PRISMA-ScR guidelines, searches were conducted across PubMed, Embase, and four databases in March 2024. Inclusion criteria included studies investigating the association between hard drug use and dental wear, regardless of publication date or language. Data were presented through narrative exposition, tables, and a conceptual framework. RESULTS: Twenty-eight studies (four case-control, three cross-sectional, five case reports, and sixteen literature reviews) were included. Among case-control studies, 75% observed an association between drug use and dental erosion; however, no cross-sectional studies demonstrated this association. Despite questionable quality, reviews established connections between drug use and dental erosion. Studies aimed to elucidate potential causes for dental erosion. CONCLUSIONS: Analysis suggests a potential link between hard drug use and dental wear, though indirect. Factors like bruxism and reduced salivary pH may contribute to dental wear among drug users. Further investigation through primary studies exploring this relationship is necessary. CLINICAL RELEVANCE: Dentists should focus not only on clinical characteristics of dental wear but also on mediating factors such as bruxism and decreased salivary pH associated with drug use. This holistic approach allows for a deeper understanding of dental wear mechanisms, enabling targeted preventive and therapeutic interventions.

School type and oral conditions associated with school performance and absenteeism in adolescents: A multilevel analysis.

BACKGROUND: Investigations assessing how oral health status affects school performance and attendance considering individual and community variables are lacking. AIM: To analyze the association of school contextual factors and oral conditions with school performance and absenteeism in early adolescence. DESIGN: This cross-sectional study was carried out with 593 12-year-old students from 20 schools in Passo Fundo, a southern city in Brazil. The caregivers provided sociodemographic information by means of a questionnaire. Oral health status was clinically examined for dental caries and gingival bleeding. Students answered the CPQ11-14 questionnaire to assess the oral health-related quality of life (OHRQoL). Information on contextual factors was obtained from the schools' administrators. "School performance" was measured by Portuguese and Mathematic tests' scores, and "school absenteeism" by the number of school days missed. Descriptive statistics was conducted, followed by unadjusted and adjusted multilevel linear regression. RESULTS: At the individual level, low OHRQoL was associated with lower school performance and higher absenteeism. At the contextual level, students from private schools had higher school performance and lower mean of school days missed. CONCLUSIONS: The type of school and OHRQoL were associated with school performance and attendance of adolescents.

Association between masticatory dysfunction and gastroesophageal reflux disease: A population-based study in the elderly.

BACKGROUND: Caries and periodontal disease may cause tooth losses and chewing difficulty, especially in the elderly. Ingesting poorly chewed food may delay gastric emptying and favour the development of gastroesophageal reflux disease (GERD). OBJECTIVE: This study investigated the association between masticatory dysfunction and GERD in the elderly from a rural area in southern Brazil. METHODS: This census invited all 489 elderly from a city to participate. The study used a GERD symptoms questionnaire, followed by an oral examination. Masticatory dysfunction was analysed based on the chewing difficulty for some food groups. Tooth loss and chewing self-perception were also considered as exposure variables. Poisson regression determined the association among variables by calculating the prevalence ratio [PR (95% confidence interval)]. RESULTS: The response rate was 93.1% (n = 455, average age of 70.9 years, 50.5% men). The prevalence of GERD in this population was 36.9%. GERD was associated with chewing difficulty for vegetables (PR = 1.54), meats (PR = 1.34) and cereals (PR = 1.43) but not with poor chewing self-perception (PR = 0.80) and tooth loss (PR = 1.22). GERD was also associated with xerostomia (PR = 1.63) and the female gender (PR = 1.35). CONCLUSION: Elderly people from a rural area with a reduced number of teeth present chewing difficulty and a high prevalence of GERD, indicating an association between GERD and masticatory dysfunction.

The influence of smoking on the effectiveness of at-home bleaching: A prospective clinical study.

OBJECTIVES: To evaluate the effect of smoking on tooth whitening and color change after at-home bleaching. MATERIALS AND METHODS: This prospective clinical study evaluated two groups of participants: NS-non-smokers (n = 24) and S-smokers (n = 16). All subjects were treated with at-home bleaching using 22% carbamide peroxide (CP) for 1 h/day for 14 days. Color coordinates (L*-luminosity, a*-red-green axis and b*-yellow-blue axis) were obtained before bleaching (D0-baseline), 1 day (D1), 15 days (D15), and 1 month (D30) after bleaching. The whiteness index (WID ) and CIEDE2000 color differences (ΔE00 ) were calculated for S and NS. Color changes between S and NS subjects for specific teeth (CI-Central Incisors, LI-Lateral Incisors, and C-Canines) were analyzed using the Mann-Whitney test (α = 0.05). RESULTS: There was no significant difference in WID between S and NS subjects at baseline. NS participants showed higher WID than S at D1, D15, and D30 (p < 0.05). NS showed higher ΔWID for CI and C between D0 and the other evaluation times (D1, D15, and D30) compared to S. Smokers showed higher darkening of CI than NS in ΔWID D30-D1 (p < 0.05). Color changes showed similar overall behavior for ΔWID . For all evaluation times, ΔWID and ΔE00 values were below the corresponding acceptability thresholds. CONCLUSION: At-home bleaching was effective on smokers and nonsmokers. Smoking negatively affected color stability after bleaching. ΔE00 and ΔWID were acceptable for both groups. CLINICAL SIGNIFICANCE: Although smoking negatively affected color stability after bleaching, the observed changes were clinically acceptable.

Influence of smoking on oral cells genotoxicity after at-home bleaching using 22% carbamide peroxide: a cohort study.

OBJECTIVE: This study evaluated the influence of smoking on the oral cells genotoxicity before and after at-home bleaching using 22% carbamide peroxide (CP). MATERIALS AND METHODS: This is a prospective observational analytics cohort study which evaluated nonsmokers (NS; n = 24) and smokers (S; n = 16) patients. At-home bleaching was performed using 22% CP gel in individual trays for 1 h per day for 14 days in both groups. Scrapped cells from marginal gums were collected before the bleaching treatment (D0-baseline) and 1 day (D1), 15 days (D15), and 1 month (D30) after its finishing. Cells were stained with Giemsa 10%, and the micronucleus (MN) and metanuclear alterations (MA) were counted by a trained operator in 1000 cells per patient. The collections and data analysis occurred blindly. Data was analyzed by Kruskal-Wallis, Dunn, and Mann-Whitney test (α = 0.05). RESULTS: MN frequency was not influenced by smoking or bleaching. An increase of MA was observed between D0 and D30 for both groups (p < 0.001); however, no statistical difference was found between NS and S (p > 0.05) in the evaluation times. CONCLUSION: Smoking associated with 22% carbamide peroxide gel for at-home bleaching does not show genotoxic potential analyzed by the MN counts. However, a significant increase of MA was found for smokers and nonsmokers. CLINICAL RELEVANCE: Despite of the increase in MA, smoking associated with 22% CP peroxide at-home bleaching showed no important genotoxic potential (MN) for oral cells. Therefore, at-home bleaching treatment is safe for nonsmokers and smokers even with a high carbamide peroxide concentration of 22%.

Experimental methodologies to evaluate the masking ability of dental materials: A systematic review.

OBJECTIVE: To conduct a systematic review on the masking ability of discolored substrates, analyzing the capacity and quality of the response produced by the different methodologies and techniques applied to overcome this clinical challenge. MATERIALS AND METHODS: The study followed the Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) statement. The electronic search was conducted in MEDLINE/PubMed, Scopus and Web of Science databases, without date restriction. In vitro studies, written in English, applying different methodologies to evaluate masking ability were included. The variables of interest were: type, color and thickness of the restorative and/or cement material; use of pigments in the restorative material and/or cement; color of the substrate; and background color used for the evaluations. RESULTS: Database search retrieved 307 eligible papers with a final inclusion of 47 published papers. Approximately 98% of the studies used ΔE, 36% used TP, and only 6% used CR to evaluate the masking ability of restorative materials. CONCLUSIONS: The most appropriate methodology to evaluate the masking ability is using color difference equations (ΔE) associated with the perceptibility and acceptability thresholds. CLINICAL SIGNIFICANCE: As different methodologies have been used to evaluate the masking ability of esthetic restorative materials on colored substrates, there is an urgent need to reach a consensus and propose a method, which is suggested by the present systematic review.

Predictors of orthodontic treatment conclusion: A historical cohort study.

INTRODUCTION: The study investigated which patient and orthodontic treatment factors act as predictors for the conclusion of the ongoing treatment in a dental clinic of a specialization program in Orthodontics. METHODS: Data were collected from the records of patients treated from 1997 to 2015. Potential predictors for treatment conclusion were investigated: patient-related factors (PRFs) and treatment-related factors (TRFs). PRFs were sex, age, face balance, Angle malocclusion classification, open bite, denture, facial pattern, facial profile, buccal corridor, crossbite, maxillary deficiency, and sagittal mandibular behavior; and TRFs were therapeutic approaches, treatment modality, extractions, and Bolton discrepancy. The initial and final treatment dates were collected. Descriptive data analysis, univariate, and multivariate logistic regression were performed (5% significance). RESULTS: Of the 903 records, 561 patients were included in the study. It was demonstrated that starting the treatment at a young age (PRF) and the presence of crossbite (TRF) are predictive factors for the treatment conclusion. A vertical facial pattern (dolichofacial or brachyfacial) and a greater number of extractions for orthodontic reasons may contribute positively to the conclusion of the treatment. The frequency of treatment inconclusion was higher during the first 2 years of treatment (more than 50% of the patients that initiated the treatment). CONCLUSIONS: Young age at the beginning of treatment and the presence of crossbite malocclusion can increase the chance of treatment conclusion.

The role of asthma in caries occurrence - meta-analysis and meta-regression.

Objective: We aimed to conduct a systematic review of the literature regarding the association between asthma and caries, assess the effect of asthma on the occurrence of caries in primary and permanent dentitions, and determine factors that could affect the estimates of this association. Data source: We used the following databases: PubMed, Web of Science, SCOPUS, and LILACS/BVS, for the literature review. Study selection: We included observational studies that investigated the association between asthma and dental caries, excluding studies with syndromic patients, literature reviews, case reports, and in vitro and in situ studies. A meta-analysis was performed to estimate a pooled effect, and meta-regression was conducted to determine study factors that could affect the estimates. Results: From 674 studies initially identified, 40 fulfilled the inclusion criteria, and 36 of these were used in the meta-analysis. Odds ratio (OR) for the pooled effect was 1.45 (95% confidence interval (CI): 1.22-1.72; I2, 71.8%; p < 0.001) and 1.52 (95% CI: 1.34-1.73; I2, 83.1%; p < 0.001) for primary and permanent dentitions, respectively. In addition, a small proportion of the heterogeneity was attributed to included factors in the meta-regression (primary dentition, 10.7%; and permanent dentition, 3.1%). Conclusions: This study provides reliable and robust evidence that emphasizes the impact of asthma on the occurrence of dental caries in both, primary and permanent, dentitions. The findings provide useful data for recommending that dentists and physicians collaborate to establish the control for both diseases in a multidisciplinary manner.

Proximal restoration increases the risk of clinical attachment loss.

AIM: To estimate the effect of proximal direct restorations in the adjacent periodontal tissues in adults from a birth cohort. MATERIALS AND METHODS: A representative sample (n = 539) of all 5,914 births occurring in Pelotas, Brazil in 1982 was prospectively investigated, being clinical attachment loss (CAL), probing depth (PD), and bleeding on probing (BOP) assessed at 31-year old. For each site, tooth surface was evaluated as sound or restored, being the restoration extension (subgingival or supragingival) and restoration material (composite and amalgam) considered. Covariables included family income, untreated caries, and service utilization patterns during life course. Multilevel Poisson regression models were used, considering three levels of variables organization: periodontal site, dental, and individual level. RESULTS: Among the 28,796 periodontal sites evaluated, CAL and PD ≥ 4 mm was observed in 1.5% and 4.8%, respectively. Multilevel models showed that proximal restorations had a significant effect on CAL and PD. Subgingival and amalgam restorations showed greater effect when compared to supragingival and composite restorations, respectively. CONCLUSIONS: The present study partially supports the hypothesis that proximal restorations are associated with the presence of periodontal damage. Although not indicative of disease, a significant increase was observed in CAL and PD at restored sites.

Restorations in primary teeth: a systematic review on survival and reasons for failures.

BACKGROUND: Several restorative materials with specific indications are used for filling cavities in primary teeth. AIM: To systematically review the literature in order to investigate the longevity of primary teeth restorations and the reasons for failure. DESIGN: Electronic databases were screened, and eligible studies were hand-searched to find longitudinal clinical studies evaluating the survival of restorations (class I, class II, and crown) placed with different materials in primary teeth with at least one year of follow-up. RESULTS: Thirty-one studies were included, and a high bias risk was observed. Overall, 12,047 restorations were evaluated with 12.5% of failure rate. A high variation on annual failure rate (AFR) was detected (0-29.9%). Composite resin showed the lowest AFRs (1.7-12.9%). Stainless steel crowns (SSC) had the highest success rate (96.1%). Class I restorations and restorations placed using rubber dam presented better AFR. The main reason for failure observed was secondary caries (36.5%). CONCLUSIONS: An elevated number of failures were observed due to recurrent caries, highlighting the need for professionals to work with a health-promoting approach. The high variation on failure rate among the materials can be due to children's behavior during the procedure, which demands short dental appointments and a controlled environment.

Effect of wearing mouthguards on the physical performance of soccer and futsal players: a randomized cross-over study.

AIM: The aim of this study was to assess the influence of custom-fit mouthguards on the aerobic performance of soccer and futsal players under 17 (U-17). MATERIAL AND METHODS: Forty players from 3 Brazilian clubs participated in the study. The athletes' aerobic performance was assessed through the 20-meter shuttle-run test. All athletes performed two tests with and without mouthguard. Two outcome variables were analyzed: (i) the total distance covered in the test (meters) and (ii) the maximum oxygen uptake (VO2 max). A questionnaire assessing the level of acceptance of mouthguards considering different parameters was administered to the athletes before the delivery of the mouthguards and after 2 weeks of use. The questionnaire used a visual analogue scale (VAS). Paired t-test was used to compare the results obtained from the shuttle-run tests and the questionnaires. RESULTS: Mouthguards did not influence the aerobic performance of the players, considering both the total distance covered in the tests and the VO2 max. Stability was the parameter with the highest acceptance. Levels of acceptance regarding breathing (P = 0.022) and communication (P = 0.002) increased after mouthguards usage. Communication had the lowest level of acceptance considering all parameters assessed. Only 10% of the players reported receiving recommendations to use mouthguards while playing football or futsal. None of the participants reported having used mouthguards before. CONCLUSIONS: The use of custom-fit mouthguards does not affect the aerobic performance of soccer and futsal U-17 players. Future studies should focus on the development of appliances with maximum protection and minimum influence on communication.

3D-printed and conventional provisional single crown fabrication on anterior implants: A randomized clinical trial.

OBJECTIVES: The present study aims to compare provisional single crowns on anterior implants made using conventional PMMA and 3D-printed workflows. The study assessed the occurrence of failures, color variation, signs of early deterioration, operating time, and patients' satisfaction with the treatment through a randomized controlled trial. METHODS: This study was conducted as a randomized controlled trial, following the SPIRIT and CONSORT guidelines. Patients were included in the study after meeting the eligibility criteria and were randomly assigned to one of two groups (conventional and 3D-printed). FDI criteria, visible plaque index (VPI), bleeding on probing (BOP), and color variation were considered as the primary outcomes. Operating time and patient satisfaction were also assessed as secondary outcomes. Fisher's exact test was performed to analyze the association between the primary and secondary outcomes and the study groups. Mann-Whitney test was used to compare the mean VAS satisfaction scores between the conventional PMMA and 3D-printed groups (STATA 14™, with an α = 0.05). RESULTS: A total of 42 provisional single crowns (n = 21) were made for 33 patients. Only the fracture parameter (FDI) showed a statistically significant difference, with 3D-printed provisionals exhibiting higher rates of catastrophic failures compared to conventional ones (p = 0.05). Although the operating time for the 3D-printed group was shorter (p < 0.001), no statistical difference observed in patients' satisfaction regarding esthetics, phonetics, chewing, or comfort. SIGNIFICANCE: 3D-printed and conventional PMMA provisional single crowns showed comparable clinical performance, except for the observed fracture types. Although 3D-printed provisional restorations showed a shorter operating time, overall patients' satisfaction was not affected.

Fatigue and marginal adaptation of bulk fill restoratives: Effect of the layering technique and cavity dimension of extensively damaged teeth.

OBJECTIVES: To evaluate the effect of layering technique and cavity dimension on the fatigue behavior and marginal adaptation of bulk fill (BF) restorations in extensively damaged teeth. METHODS: Seventy-two premolars received class II cavities (MOD) followed by endodontic treatment. Half sample had 1/3 of their palatal cusp removed. Teeth were restored using three techniques: (I) incremental, with conventional resin composite (RC); (C) combined, using BF flow and RC, (B) bulk fill, with regular BF. Specimens were subjected to fatigue (80 N, 2 Hz, 37° C water) for 1 million cycles (n = 12). The test was interrupted every 250,000 cycles to evaluate tooth integrity, restoration fracture and adaptation using FDI criteria. Images of the proximal surfaces were obtained before and after the cycling to measure the gap. Restoration fatigue survival and success were analyzed using Weibull distribution and Maximum Likelihood Estimation. Gap thickness was analyzed with Kruskal-Wallis and Student-Newman-Keuls tests (α = 0.05). RESULTS: For the survival analysis, Weibull modulus (ß) and characteristic lifetime (η) were similar among groups. Yet, for the success analysis, in which only restorations that were free of technical complications were ranked as success, the bulk-fill technique resulted in higher ß, while the combined technique produced restorations with higher η, for teeth that had their cusp removed. C-technique also resulted in smaller gaps than I and B. SIGNIFICANCE: The effect of the layering technique on the success of restorations was dependent on the cavity extension. The combined technique favors the adaptation and the longevity of extensively damaged teeth.

10-year practice-based evaluation of ceramic and direct composite veneers.

OBJECTIVES: This 10-year practice-based study aimed to compare survival and success of direct resin composite and ceramic veneers placed in a private dental practice, between January 2008 and March 2014. METHODS: Data were retrieved from a clinical practice's records and were anonymized typed into electronic files. All veneer information was recorded, including previous restorations, repairs or failures, materials used, dates, patient, and age. RESULTS: We analyzed 1459 veneer restorations, of which 1043 (71.5%) were direct composite, and 416 (28.5%) were ceramic, placed in 341 patients. The mean patients' age was 47.8 years, and the mean number of restorations per patient was 4.3 restorations. During all follow-up, 957 (65.6%) veneers were successful without any repair, 252 (17.3%) were repaired and still in place, and 250 (17.1%) had a failure that resulted in replacement. Replacements were usually carried out with the same material placed at first. Considering success analysis, annual failure rates (AFR) for veneers in 5 and 10 years were 9.1% and 10% for direct composite and 2.9% and 2.8% for ceramic, respectively. Survival analysis showed AFR of 3.9% and 4.1% for composite and 1.4% and 1.2% for ceramic at the same periods. Cox regression was made for both success and survival outcomes. Composite veneers presented a higher risk of failure than ceramic veneers with higher hazard ratios for survival (HR) [HR 4.00 (2.74-5.83)] and success [HR 5.16 (2.65-10.04)]. SIGNIFICANCE: Ceramic veneers had superior longevity than direct composite veneers in both success and survival analysis.

Clinical performance of posterior resin composite restorations after up to 33 years.

OBJECTIVES: This retrospective study evaluated the performance of posterior composites after up to 33 years of clinical service and investigated factors associated with the risk of failures over time including patient- and tooth-related variables. METHODS: Patients who received at least one Class I or Class II direct composite restoration in a private office in 1986-1992 and had follow-up appointments were included. Failures and interventions over time were investigated using the dental records. A follow-up clinical recall was carried out in 2020. Two scenarios were considered: restorations that did not require any intervention (success) or restorations that were repaired and still functional (survival). Multivariate Cox regression analyses and Kaplan-Meier curves were performed using success and survival rates (p < 0.05). RESULTS: One hundred patient records and 683 restorations were included. A total of 353 failures were reported (success rate= 48%). Main reasons for failure were fracture and secondary caries. Most interventions after failures were repairs. Replacements were registered in 183 cases (survival rate= 73%). Annual failure rates were below 2.5% (success) and 1.1% (survival). Larger restorations and maxillary molars had higher failure risks. No significant differences in success rates among different resin composites was observed. A typical observation in this sample of restorations was the presence of moderate to advanced signs of aging, including marginal and surface staining, wear, chipping, changes in anatomical shape and translucency. Clearly aged restorations were still clinically satisfactory. SIGNIFICANCE: This long-term, practice-based study indicates that resin composites can be used to restore posterior teeth with a long-lasting durability.

3D printing restorative materials using a stereolithographic technique: a systematic review.

OBJECTIVE: To present through a systematic review a qualitative analysis of studies published on stereolithography-based 3D printing of restorative materials and their clinical applicability. METHODS: The literature search was conducted based on the question: "What is the state-of-the-art of available restorative materials for 3D printing based on stereolithography?" Online search was conducted in three databases (MEDLINE/PubMed, Scopus and Web of Science) with no restriction for year of publication. Data are reported based on PRISMA, including publication details such as authors and their countries, year and journal of publication, and study design. The synthesis is focused on describing the dental restorative materials and properties evaluated, applied methods, 3D printers used and clinical applicability. RESULTS: Studies that fit the inclusion criteria were performed in Asia (21), Europe (16) and USA (10), mostly using polymer-based restorative materials (38) for 3D printing constructs. Stereolithographic-printed ceramic-based restorative structures were evaluated by 9 studies. Many studies reported on dimensional accuracy (14), strength (11) and surface morphology (9) of the printed structures. Antibacterial response, cytotoxicity, internal and marginal fit, fracture and wear resistance, density, viscosity, elastic modulus, hardness, structural shrinkage and reliability, degree of conversion, layer cure depth, fatigue, and color were also evaluated by the included studies. Many of them (11) published a proof of concept as an attempt to demonstrate the clinical feasibility and applicability of the technology to print restorative materials, but only 5 studies actually applied the 3D printed restorative structures in patients, which highlights an increasing interest but limited early-stage translation. SIGNIFICANCE: The fast expansion of stereolithographic-based 3D printing has been impressive and represents a great technological progress with significant disruptive potential. Dentistry has demonstrated an incredible willingness to adapt materials, methods and workflows to this promising digital technology. However, esthetic appearance, wear resistance, wet strength and dimensional accuracy are the main current clinical limitations restricting the progression to functional part production with 3D printing, which may explain the absence of clinical trials and reports on permanent/definitive dental restorative materials and structures.

Determinants of dental prosthetic treatment need: A birth cohort study.

OBJECTIVES: To estimate the incidence of the need for a dental prosthesis during early adulthood and its association with socioeconomic and oral disorder trajectories. METHODS: In 1982, in the city of Pelotas, all live births (n = 5914) and their mothers were assessed. A representative sample of this cohort study was examined for oral health conditions at 15, 24 and 31 years (Oral Health Study-OHS). The need for a dental prosthesis was assessed at 24 and 31 years of age, and variables of interest (gender, skin colour, socioeconomic status (SES), use of dental services, caries and periodontal disease) were collected from different waves of this cohort. Longitudinal association between outcome and variables of interest was assessed using multilevel mixed models. RESULTS: A total of 539 individuals were assessed in 2013 (60.7% response rate). The need for a dental prosthesis was 28.9% at 24 years. (95% CI 24.9-33.2) and 49.0% at 31 years (95% CI 44.7-53.3). Risk of presenting with a need for a dental prosthesis was higher in users of public services. Downwardly mobile and lower SES trajectory groups presented a higher risk of the need for a dental prosthesis. High-risk caries trajectory group showed a higher risk of presenting with the need for a dental prosthesis from 24 to 31 years. CONCLUSIONS: Our findings demonstrate that the need for dental prosthesis from 24 to 31 years old was determined by trajectories of exposure during the life cycle, reinforcing that tackling socioeconomic inequalities at any stage of life can have an effect on an individual's oral health.

Effectiveness of hydrogen peroxide as auxiliary treatment for hospitalized COVID-19 patients in Brazil: preliminary results of a randomized double-blind clinical trial.

OBJECTIVES: To evaluate the effectiveness of hydrogen peroxide (H2O2) in the form of mouthwash and nasal spray as an auxiliary treatment for coronavirus disease 2019 (COVID-19). METHODS: Forty hospitalized patients who tested positive for severe acute respiratory syndrome coronavirus 2 using a reverse-transcription polymerase chain reaction test were evaluated. They were randomly divided into an experimental group (n= 20; gargling with 1.0% H2O2 and nasal wash with 0.5% H2O2) or a control group (n= 20). The solutions were used for 7 days and the patients were monitored every 2 days, for a total of 8 days. At check-ups, patients were asked about their symptoms and possible adverse effects of the solutions. The presence and severity (mild, moderate, or severe) of symptoms were recorded. Data were compared using the Student test and the Fisher exact test (α= 0.05). RESULTS: There was no significant difference between the 2 groups in the length of hospital stay (p= 0.65). The most frequent symptom on day 0 was coughing (72.0% in the experimental group and 76.5% in the control group), which abated over time. There was no significant difference between the groups in the evaluated symptoms. Most (75.0%) of the patients in the experimental group presented a reduction in dyspnea between days 0 and 2. Few patients reported adverse effects from the use of the solutions. CONCLUSIONS: H2O2 as a mouthwash and nasal spray is safe to use. There is insufficient evidence to demonstrate that H2O2 is effective as an auxiliary treatment for hospitalized COVID-19 patients.