Ultrasonication effects on physicochemical properties of biopolymer-based films: A comprehensive review.

Biopolymeric films manufactured from materials such as starch, cellulose, protein, chitosan, gelatin, and polyvinyl alcohol are widely applied due to their complete biodegradability. While biopolymer-based films exhibit good gas barriers and optical properties when used in packaging, poor moisture resistance and mechanical properties limit their further application. Ultrasonication is a promising, effective technology for resolving these shortcomings, with its high efficiency, environmentally friendly nature, and safety. This review briefly introduces basic ultrasonication principles and their main effects on mechanical properties, transparency, color, microstructure, water vapor permeability, and oxygen resistance. We also describe the thermal performance of biopolymeric films. While ultrasonication has many positive effects on the physicochemical properties of biopolymeric films, many factors influence their behavior during film preparation, including power density, amplitude, treatment time, frequency, and the inherent properties of the source materials. This review focuses on biopolymers as film-forming materials and comprehensively discusses the promotional effects of ultrasonication on their physicochemical properties.

Preparation and Size Control of Efficient and Safe Nanopesticides by Anodic Aluminum Oxide Templates-Assisted Method.

Efficient and safe nanopesticides play an important role in pest control due to enhancing target efficiency and reducing undesirable side effects, which has become a hot spot in pesticide formulation research. However, the preparation methods of nanopesticides are facing critical challenges including low productivity, uneven particle size and batch differences. Here, we successfully developed a novel, versatile and tunable strategy for preparing buprofezin nanoparticles with tunable size via anodic aluminum oxide (AAO) template-assisted method, which exhibited better reproducibility and homogeneity comparing with the traditional method. The storage stability of nanoparticles at different temperatures was evaluated, and the release properties were also determined to evaluate the performance of nanoparticles. Moreover, the present method is further demonstrated to be easily applicable for insoluble drugs and be extended for the study of the physicochemical properties of drug particles with different sizes.

Extraction and Purification of Capsaicin from Capsicum Oleoresin Using a Combination of Tunable Aqueous Polymer-Phase Impregnated Resin (TAPPIR) Extraction and Chromatography Technology.

Capsaicin, which mainly comes from pepper, exhibits anticancer, antioxidant, and anti-obesity properties. This work aims to construct a comprehensive technology for the extraction and purification of capsaicin from capsicum oleoresin. The tunable aqueous polymer phase impregnated HZ816 resins were selected in extraction step. In the extraction process, 3 g of impregnated HZ816 macroporous resin was employed per system. The results showed that a higher molecular weight of Polyethylene glycol (PEG) and 1-ethyl-3-methyl imidazolium acetate ([Emim] [OAc]) are more beneficial to the improvement of the yield of capsaicin. Screening experiment using fractional factorial designs indicated that the amount of sample loading, pH, and concentration of [Emim] [OAc] and PEG 6000 significantly affect the yield of capsaicin. Mathematical models of capsaicin yield in tunable aqueous polymer-phase impregnated resins were established and optimum condition was obtained using response surface methodology. The optimum impregnated phase was the polymer phase of an aqueous two-phase system which contained 18.5% (w/w) PEG6000, 15% (w/w) sodium citrate, and 10% (w/w) [Emim] [OAc] at pH 6.5. Under the optimal conditions, the yield of capsaicin reached 95.82% when the extraction system contains 0.25 g capsicum oleoresin. Ultimately, capsaicinoids extract was purified by reverse-phase resin (SKP-10-4300) chromatographic column. The capsaicin recovery and purity achieved 85% and 92%, respectively.

Characterization and Insights Into the Nano Liposomal Magnetic Gene Vector Used for Cell Co-Transfection.

The development of magnetofection technology has brought a promising method for gene delivery. Here, we develop a novel liposomal magnetofection system, consisted of magnetic nanoparticle and liposome through molecular assembly, was applied to introduce double genes into porcin somatic cells with high co-transfection efficiency. The performace of liposomal magnetic gene nanovectors has been evaluated by involving the micro morphology, diameters distribution, zeta potentials and the capacity of loading DNA molecules. The assembly way among magnetic gene nanovectors and DNA molecules was investigated by atomic force microscopy. Liposomal nano magnetic gene vectors complexes displayed nanoscale assembly and formed compact "fishing-net structure" after combining with plasmid DNA, which is favorable to enhance the loading capacity of DNA molecules.

Starch/ionic liquid/hydrophobic association hydrogel with high stretchability, fatigue resistance, self-recovery and conductivity for sensitive wireless wearable sensors.

Conductive hydrogels have been widely used in wearable electronics due to their flexible, conductive and adjustable properties. With ever-growing demand for sustainable and biocompatible sensing materials, biopolymer-based hydrogels have drawn significant attention. Among them, starch-based hydrogels have a great potential for wearable electronics. However, it remains challenging to develop multifunctional starch-based hydrogels with high stretchability, good conductivity, excellent durability and high sensitivity. Herein, amylopectin and ionic liquid were introduced into a hydrophobic association hydrogel to endow it with versatility. Benefiting from the synergistic effect of amylopectin and ionic liquid, the hydrogel exhibited excellent mechanical properties (the elongation of 2540 % with a Young's modulus of 12.0 kPa and a toughness of 1.3 MJ·m-3), self-recovery, good electrical properties (a conductivity of 1.8 S·m-1 and electrical self-healing), high sensitivity (gauge factor up to 26.85) and excellent durability (5850 cycles). The above properties of the hydrogel were closely correlated to its internal structure from hydrophobic association, H-bonding and electrostatic interaction, and can be regulated by changing the component contents. A wireless wearable sensor based on the hydrogel realized accurate and stable monitoring of joint motions and expression changes. This work demonstrates a kind of promising biopolymer-based materials as candidates for high-performance flexible wearable sensors.

Characteristics of biofilms on polylactic acid microplastics and their inhibitory effects on the growth of rice seedlings: A comparative study of petroleum-based microplastics.

Increasing evidence highlights the negative effects of microplastics (MPs) on crops and bio-based plastics offer an alternative to conventional plastics. However, there is limited knowledge on the impacts and mechanisms of bio-based MPs on crop physiology. In this study, bio-based polylactic acid (PLA) and petroleum-based MPs [polyamide (PA) and polypropylene (PP)] were added to hydroponic cultures planted with rice (Oryza sativa L.) seedlings to assess their toxicity. Compared to PA and PP MPs, PLA MPs experienced greater aging after 28 days of exposure, and their surfaces were loaded with more rod-shaped microorganisms with potential plastic degradation ability, such as Proteobacteria and Bacteroidota, which competed with rice seedlings for carbon and nitrogen sources for self-multiplication, thus altering the carbon fixation and nitrogen cycling processes during rice seedling growth. Down-regulation of amino acid and lipid metabolisms in the PLA treatment inhibited the normal synthesis of chlorophyll in rice seedling leaves. Consequently, decreases in the biomass and height of rice seedling roots and shoots were observed in the PLA MP treatment. This study provides evidence that bio-based MPs may have a more severe impact on crop growth than petroleum-based MPs.

Photoelectrochemical sensor for the detection of Escherichia coli O157:H7 based on TPA-NO2 and dual-functional polythiophene films.

The detection of Escherichia coli (E. coli) is of great significance for the environment and human health. Herein, a photoelectrochemical (PEC) detection strategy based on molecularly imprinted polymers (MIPs) was proposed for the sensitive detection of E. coli. 4,4',4″-Trinitrotriphenylamine (TPA-NO2) was prepared using a simple nitration reaction. Subsequently, MIP films were polymerized on the surface of TPA-NO2 using 1,3-dihydrothieno[3,2-d]pyrimidine-2,4-dione as the functional monomer with the dual functions of specific recognition and sensitization. The linear range was 10-108 CFU/mL and the limit of detection was 10 CFU/mL. It showed favorable recoveries in real sample tests of milk, orange juice and tomato. Additionally, the ability of functional monomers to bind excellently with E. coli was verified using molecular docking techniques. This research provided broader possibilities for constructing MIPs-PEC sensors and analyzing the interaction mechanism between E. coli and functional monomers.

Molecularly imprinted Photoelectrochemical sensor for Escherichia coli based on Cu:ZIF-8/KZ3TTz heterojunction.

Herein, a signal stable molecularly imprinted photoelectrochemical (MIP-PEC) sensing platform was designed to sensitively detect Escherichia coli by incorporating polythiophene film with Cu: ZIF-8/KZ3TTz heterojunction. Attributed to the formation of a staggered type II heterostructure between KZ3TTz and Cu: ZIF-8 semiconductors, the Cu: ZIF-8/KZ3TTz heterojunction exhibited stable and significant cathode PEC response. Impressively, selective MIP film was grown on the surface of Cu: ZIF-8/KZ3TTz/GCE by electro-polymerization of 2,2-Dimethyl-5-(3-thienyl)-1,3-dioxane-4,6-dione (DTDD) in the presence of E. coli. After removing E. coli, more electrons were transferred to the electrolyte solution through the imprinting cavity on the MIP film, which was eliminated by O2 in the electrolyte, causing further enhancement of the cathode PEC response. On the contrary, when the imprinted cavity was filled with E. coli, the cathodic PEC response gradually decreased due to steric hindrance effect. The sensor showed excellent linearity in the range of 101 to 108 CFU/mL with a detection limit of 4.09 CFU/mL (S/N = 3). This strategy offered a novel approach for pathogenic bacteria detection in food safety and environmental monitoring.

Effect of emulsifiers on the properties of corn starch films incorporated with Zanthoxylum bungeanum essential oil.

The use of natural and safe ingredients in green food packaging material is a hot research topic. This study investigated the effect of different emulsifiers on starch film properties. Three types of emulsifiers, including Tween 80 as a small-molecule surfactant, sodium caseinate (CAS), whey protein isolate (WPI), and gelatin (GE) as macromolecule emulsifiers, whey protein isolate fibril (WPIF) as a particle emulsifier, were utilized to prepare Zanthoxylum bungeanum essential oil (ZBO) emulsions. The mechanical, physical, thermal, antibacterial properties, microstructure and essential oil release of starch films were investigated. CAS-ZBO nanoemulsion exhibited the smallest particle size of 198.6 ± 2.2 nm. The film properties changed with different emulsifiers. CAS-ZBO film showed the highest tensile strength value. CAS-ZBO and WPIF-ZBO films exhibited lower water vapor permeability than Tween-ZBO. CAS-ZBO film showed good dispersion of essential oil, the slowest release rate of essential oils in all food simulants, and the best antibacterial effect against Staphylococcus aureus and Listeria monocytogenes. The films composed of CAS-ZBO nanoemulsion, corn starch, and glycerol are considered more suitable for food packaging. This work indicated that natural macromolecule emulsifiers of CAS and WPIF are expected to be used in green food packaging material to offer better film properties.

Preparation of starch-based green nanofiber mats for probiotic encapsulation by electrospinning.

In this study, starch-based nanofiber mats were successfully prepared from aqueous solution by electrospinning and used for probiotic encapsulation for the first time. The physicochemical properties of the octenylsuccinated (OS) starch/poly(vinyl alcohol) (PVA) blend solutions were systematically investigated. Through Fourier transform infrared spectroscopy and X-ray diffraction spectra analysis, it was found that miscibility and hydrogen bonding interactions exist between OS starch and PVA molecules. Thermogravimetric analysis and derivative thermogravimetric analysis revealed that the produced nanofibers possess satisfactory thermal stability. Scanning electron microscopy images and diameter distribution histograms showed that continuous and defect-free nanofibers were obtained and along with the increase in the weight ratio of OS starch, the average diameter gradually decreased. In addition, it was confirmed that the probiotics were successfully encapsulated in nanofiber mats. The survival rates of Lactobacillus plantarum AB-1 and Lactobacillus rhamnosus GG encapsulated in nanofibers were as high as 94.63% and 92.42%, respectively, significantly higher than those of traditional freeze-drying. Moreover, compared to free cells, probiotics encapsulated in nanofiber mats retained better viability after 21 days of storage at 4 and 25°C, and showed remarkably higher survival rates after exposure to simulated gastric and intestinal fluid. This study showed that the developed nanofibers can be a promising encapsulation system for the protection of probiotics.

Starch/polyvinyl alcohol with ionic liquid/graphene oxide enabled highly tough, conductive and freezing-resistance hydrogels for multimodal wearable sensors.

With ever-growing demand for eco-friendly materials for wearable electronics, biopolymer-based hydrogels have drawn significant attention. As one of the most abundant and biodegradable biopolymers, starch-based hydrogels have a great potential for wearable electronics. However, mechanical fragility, low conductivity and subzero freeze restrict their applications. Here, a multifunctional hydrogel was facilely fabricated by integrating ionic liquid and graphene oxide into potato starch/polyvinyl alcohol skeleton via a green physical-crosslinking method. The abundant hydrogen-bond and electrostatic interactions endowed the hydrogel with excellent stretchability (657.5 %), strength (0.64 MPa), high conductivity (1.98 S·m-1) and good anti-freezing property (< -20 °C). Multiple characterizations and theoretical simulation (DFT) were combined to understand and confirm the interactions among different components. Taking advantage of these properties, multimodal wearable sensors were constructed for sensing tension (gauge factor: 6.04), compression (gauge factor: 3.27) and temperature (sensitivity: 0.71 %/°C), which are applied for monitoring human motion, daily-life pressure and body temperature. The sensor had a good anti-fatigue property with stable signals during 2000 cycles. Moreover, the sensor can effectively recognize handwriting and perform human-computer interaction. This work provides a promising route to develop sustainable and multifunctional biopolymer hydrogels for wearable sensors with versatile applications in human health, exercise monitors and soft robots.

Intermolecular interactions between starch and polyvinyl alcohol for improving mechanical properties of starch-based straws.

Starch/polyvinyl alcohol (PVA) degradable straws with different PVA contents were prepared by the twin-screw extrusion method. The results showed that the starch/PVA straws with 40 % PVA (PS4) had the highest dispersion uniformity of starch and PVA to achieve the best compatibility, and the compatibility size was below the micron level. Molecular interactions between starch and 40 % polyvinyl alcohol reached the highest due to the highest strength of hydrogen bonds, hence resulting in the highest texture densities. Consequently, the largest compatibility and molecular interactions significantly improved the mechanical properties and water resistance of PS4. Compared to the starch/PVA straw with 0 % PVA (PS0), swelling volume of PS4 decreased by 45.5 % (4 °C) and 65.2 % (70 °C), respectively. After soaking, the diameter strength increased by 540.1 % (4 °C, 1 h) and 638.7 % (70 °C, 15 min), respectively. Water absorption decreased by 45.3 % (4 °C, 30 min) and 27.6 % (70 °C, 30 min).

Pretension-Free and Self-Recoverable Coiled Artificial Muscle Fibers with Powerful Cyclic Work Capability.

Similar to natural muscle fibers, coiled artificial muscle fibers provide a straightforward contraction. However, unlike natural muscle fibers, their recovery from the contracted state to the initial state requires high stress, resulting in almost zero work during a full actuation cycle. Herein, a self-recoverable coiled artificial muscle fiber was prepared by conformally coating an elastic carbon nanotube (CNT) fiber with a very thin liquid crystal elastomer (LCE) sheath. The as-obtained muscle fiber demonstrated excellent actuation properties comprising 56.9% contractile stroke, 1522%/s contraction rate, 7.03 kW kg-1 power density, and 32,000 stable cycles. The LCE chains were helically aligned in a nematic phase, and the phase change of the LCE caused by Joule heating drove the actuation process. Moreover, the LCE/CNT fiber had a well-separated, torsionally stable, and elastic coiled structure, which permitted large contractile strokes and acted as an elastic template for external-stress-free recovery. Thus, the use of self-recoverable muscle fibers to mimic the natural muscles for object dragging, multidirectional bending, and quick striking was demonstrated.

Determination of nitrite in food based on its sensitizing effect on cathodic electrochemiluminescence of conductive PTH-DPP films.

Herein, a novel strategy for electrochemiluminescence (ECL) detection of nitrite based on its sensitization effect on cathode ECL emission of 3,6-di(2-thienyl)-2,5-dihydropyrrolo [3,4-c] pyrrole-1,4-dione (TH-DPP) polymeric films (PTH-DPP) was formulated, by means of a one-step electropolymerization of TH-DPP with a short time on the glassy carbon electrode (GCE). It was shown that the PTH-DPP film-modified GCE exhibited a strong ECL response when S2O82- was used as a co-reactant. The ECL emission could be greatly enhanced by PTH-DPP with nitrite in a K2S2O8/PBS solution system and occurred at a relatively lower potential in comparison with traditional cathode ECL emitter, leading to high sensitivity and good selectivity. The ECL sensor exhibits excellent linear relationship in the ranges of 0.3 to 100 µM and 100 to 1000 µM for nitrite detection, with an outstanding detection limit of 0.08 µM (S/N = 3). The ECL sensor provides an impressive outcome for the detection of practical samples.

Construction of reversible enol-to-keto-to-enol tautomerization covalent organic polymer for sensitive, selective and multi-channel detection of iron (III).

As an important element in organism, the lack and excess of ferric ions (Fe3+) may lead to an extensive range of diseases presenting with distinct clinical manifestations. In our design, a multi-channel probe with reversible enol-to-keto-to-enol tautomerization for the specific recognition and high sensitivity detection of Fe3+ was prepared. This paper reported a novel Cop-NC probe, Tris (4-formylphenyl) amine bearing 1,4-cyclohexanedione groups, which provides binding site for Fe3+ and also contributes both fluorescent and electrochemical signals. The as-synthesized Cop-NC exhibit intense fluorescence under an excitation wavelength at 378 nm with a quantum yield of 26%. Results of spectroscopic measurement show that Fe3+ can significantly cause a "Switch-off" fluorescence intensity effect. Simultaneously, the addition of Fe3+ can cause a "Switch-on" effect in electrochemical channel. It has realized the detection of Fe3+ with concentration as low as 0.4 µM and 1.0 nM in the fluorescence channel and redox channel, respectively. The development of the joint probe with multi-channel signals provides a more convenient and rapid detection method for food, medical treatment, environmental monitoring and other fields.

A critical review on starch-based electrospun nanofibrous scaffolds for wound healing application.

Starch-based nanofibrous scaffolds exhibit a potential wound healing processes as they are cost-effective, flexible, and biocompatible. Recently, natural polymers have received greater importance in regenerative medicine, mainly in the process of healing wounds and burns due to their unique properties which also include safety, biocompatibility, and biodegradability. In this respect, starch is considered to be one of the reliable natural polymers to promote the process of wound healing at a significantly faster rate. Starch and starch-based electrospun nanofibrous scaffolds have been used for the wound healing process which includes the process of adhesion, proliferation, differentiation, and regeneration of cells. It also possesses significant activity to encapsulate and deliver biomaterials at a specific site which persuades the wound healing process at an increased rate. As the aforementioned scaffolds mimic the native extracellular matrix more closely, may help in the acceleration of wound closure, which in turn may lead to the promotion of tissue reorganization and remodeling. In-depth knowledge in understanding the properties of nanofibrous scaffolds paves a way to unfold novel methods and therapies, also to overcome challenges associated with wound healing. This review is intended to provide comprehensive information and recent advances in starch-based electrospun nanofibrous scaffolds for wound healing.

Polylactic acid nanoparticles for co-delivery of dinotefuran and avermectin against pear tree pests with improved effective period and enhanced bioactivity.

Pesticide compounding technology for disease and pest control emerges as an effective way to increase the effectiveness of pesticides while reducing pesticides resistance. Nanomaterials and encapsulation technology have offered a new insight into preparing efficient pesticide formulations, especially constructing a co-delivery nanoparticle for synergistic pesticides. In this study, a dinotefuran/avermectin co-delivery nanoparticles (DACNPs) against pear tree pests with polylactic acid (PLA) as the wall material were constructed by double-emulsion method combined with high-pressure homogenization technique. The drug content of the DACNPs was 39.1% with an average size of 245.7 ± 4.2 nm and the mean polymer dispersity index (PDI) value was 0.123. The DACNPs showed high foliar retention and good spread performance on target leaves due to the nanoscale effect. The obtained DACNPs showed a better control effect on Grapholitha molesta Busck and Psylla chinensis Yang et Li compared with the commercial formulations, which could significantly prolong the effective duration and enhance the bioactivity with lower amounts and application frequency of pesticides. This study may provide new insights into developing novel pesticide formulations to improve the utilization rate of pesticides, reduce environmental pollution and minimize the cost of farming.

Direct regeneration of hydrogels based on lemon peel and its isolated microcrystalline cellulose: Characterization and application for methylene blue adsorption.

In this study, we developed a facile and eco-friendly fabrication of hydrogels based on lemon peel (LP) and its isolated microcrystalline cellulose (LPMCC) by direct co-dissolving in 1-butyl-3-methylimidazolium chloride (BmimCl), followed by direct regeneration in distilled water to form hydrogels. The influence of LP addition on the structure and methylene blue (MB) adsorption of the hydrogels was systematically investigated. The hydrogels displayed a physically cross-linked network through hydrogen bonding interactions. Compared with pure LPMCC hydrogel, the introduction of LP increased the porosity and improved the thermal stability of the hydrogels. The adsorption process of MB on the hydrogels conformed better to the pseudo-second-order kinetic (R2 > 0.993) and Langmuir isotherm models (R2 > 0.996). The MB adsorption process was feasible, spontaneous and exothermic in nature, and was influenced by initial MB concentration, pH, temperature, ionic type and strength. Notably, the introduction of LP improved MB adsorption capacity of the hydrogels. This work develops a facile approach of agricultural by-products based hydrogels using pure cellulose as the structural skeleton and untreated lignocellulose components as the structure modifier.

Preparation and characterization of octenyl succinylated starch microgels via a water-in-oil (W/O) inverse microemulsion process for loading and releasing epigallocatechin gallate.

Corn starch (CS), octenyl succinic anhydride modified corn starch (OSCS) and shells (OSCs) microgels have been prepared using water-in-oil (W/O) inverse microemulsions for loading and releasing of epigallocatechin gallate (EGCG). The structural and morphological properties of CS, OSCS, and OSCs microgels were characterized by Fourier transform infrared (FTIR) spectroscopy, X-ray diffraction (XRD), Transmission electron microscopy (TEM), and Thermogravimetric analysis (TGA). The strong hydrogen bonds between starch molecules in the W/O system and interplay between hydroxyl groups of EGCG and oxygen atoms of starch microgels were formed. OSCs microgel showed low average particle size and weak thermal stability with an irregular shape and a typical V-type crystalline structure. Encapsulation efficiency (EE) and clearance rate of 2,2-diphenyl-1-picrylhydrazyl (DPPH) for EGCG were ranged between 41.78 and 63.89% and 75.53-85.37%, respectively, when absorbed into OSCS and OSCs microgels, the values which were higher than that of CS microgel. Further, OS starch microgels (particularly OSCs) modulated the slow release of EGCG into simulated gastrointestinal tract conditions and therefore could be proposed as an encapsulating agent for loading polyphenols.

Non-enzymatic electrochemical detection of glucose using Ni-Cu bimetallic alloy nanoparticles loaded on reduced graphene oxide through a one-step synthesis strategy.

In this work, Ni-Cu bimetallic alloy nanoparticles supported on reduced graphene oxide (Ni-Cu ANPs/RGO) was successfully fabricated through a one-step hydrothermal synthesis method, where simultaneous reduction of graphene oxide, nickel salt and copper salt was performed, and relevant characterization studies were executed. This synthetic method does not require surfactants and high temperature treatment, and is recommended as a green, convenient and effective way to produce composites. The unique two-dimensional architecture of the RGO provides a large specific surface area, contributing to loading more Ni-Cu ANPs, while the uniformly distributed Ni-Cu bimetallic alloy nanoparticles enhance the electrocatalytic performance of glucose oxidation. The non-enzymatic glucose biosensor based on Ni-Cu ANPs/RGO showed a wide linear range (from 0.01 µM to 30 µM), low detection limit (0.005 µM), and excellent sensitivity (1754.72 µA mM-1 cm-2). More importantly, the high reliability and the excellent selectivity in actual sample detection will broaden its practical application in electrochemical sensing.