Anticancer Effect of STING Agonist-Encapsulated Liposomes on Breast Cancer.

Breast cancer is one of the most common cancers worldwide, posing a serious threat to human health. Recently, innate immunity has become a widely discussed topic in antitumor research. The STING pathway is an important component of innate immunity, and several STING agonists have been developed and applied in antitumor research. Dimeric amidobenzimidazole (diABZI) is one STING agonist and is a nucleotide analog with low serological stability and cell membrane permeability. In this study, we prepared diABZI-encapsulated liposomes (dLNPs) using the ammonium sulfate gradient method. The average particle size of the dLNPs was 99.76 ± 0.230 nm, and the encapsulation efficiency was 58.29 ± 0.53%. Additionally, in vivo and in vitro assays showed that the dLNPs had a sustained-release effect and that the circulation time in vivo was longer than 48 h. The expression of IFN-ß and IFN-γ was elevated in mice treated with dLNPs. Moreover, we found that dLNPs can recruit CD8+ T cells to tumor tissue and exert antitumor effects. The dLNPs-treated group showed the most significant efficacy: the average tumor volume was 231.46 mm3, which decreased by 78.16% and 54.47% compared to the PBS group and diABZI group. Meanwhile, the hemolysis rate of the dLNPs was 2%, showing high biocompatibility. In conclusion, dLNPs can effectively suppress tumor growth and possess great potential in breast cancer therapy.

[Material basis and mechanism of Xiao'er Resuqing Oral Liquid on hand, foot and mouth disease based on network pharmacology and molecular docking].

This paper aimed to investigate the active components and molecular mechanism of Xiao'er Resuqing Oral Liquid on hand, foot and mouth disease(HFMD) based on network pharmacology and molecular docking methods. The potential active components of 8 herbs in Xiao'er Resuqing Oral Liquid were selected through Traditional Chinese Medicine Systems Pharmacology Database(TCMSP), Batman database and relevant literature consultation. Then related targets for the medicine were analyzed through PubChem and Swiss Target Prediction database, while related targets for HFMD were analyzed through GeneCards platform. The common targets for medicine and disease were put into STRING database to obtain the potential targets of Xiao'er Resuqing Oral Liquid for treatment of HFMD. The Cytoscape software was used to establish the "herbs-components-targets-disease" network. The protein-protein interaction(PPI) network was constructed based on STRING platform and Cytoscape software to screen the core targets. Based on Metascape platform, GO function enrichment analysis and KEGG signal pathway enrichment analysis were carried out. The main active components and potential key targets of Xiao'er Resuqing Oral Liquid were verified by molecular docking with Autodock vina 1.1.2 software. A total of 118 potential active components and 123 potential targets for treatment of HFMD were collected. PPI network indicated a total of 23 key targets, such as AKT1, MAPK1, IL6, VEGFA, EGFR, TNF, HRAS, CCND1, and CXCL8. GO function enrichment analysis results showed that there were 381 GO biological processes, 127 GO cellular components, and 117 GO molecular functions(P<0.01). KEGG enrichment analysis showed that 116 signal pathways were obtained(P<0.01), and the results showed that it was mainly associated with TNF signal pathway, IL-17 signal pathway, inflammatory mediator regulation of TRP channels, and cytokine-cytokine receptor interaction. Molecular docking results showed that the main active components all had a high binding ability with the main potential key targets. This study preliminarily investigated the multi-pathways, multi-targets and multi-components molecular mechanism of Xiao'er Resuqing Oral Liquid for treatment of HFMD, providing theoretical references for further researches on its active components and action mechanism.

Preparation, Mechanical Properties, and Biocompatibility of Graphene Oxide-Reinforced Chitin Monofilament Absorbable Surgical Sutures.

Chitin (CT) is a good material to prepare surgical sutures due to its conspicuous biological characteristics. However, the poor mechanical strength of pure CT sutures limits its application. In order to improve its strength, a composite monofilament absorbable suture was prepared in this study using graphene oxide and chitin (GO-CT) using a green method. FT-IR spectra showed that GO-CT contained the characteristic functional groups of GO and CT, indicating that a GO-CT suture was successfully obtained. With the addition of a small amount of GO (1.6wt% solution) in chitin, the breaking tensile strength, knot strength, and knot-pull strength of the GO-CT suture were significantly improved compared to the CT suture. The biocompatibility of the GO-CT suture in vitro was checked by tetrazolium-based colorimetric assays and no cytotoxicity to L929 cells was found. In vivo, the subcutaneous implantation of GO-CT sutures in the dorsal skin of rats found no abnormalities by hematoxylin-eosin staining. Furthermore, there were no significant changes in the gene expression of the inflammatory mediators, interleukin 1ß (IL-1ß), tumor necrosis factor-α, IL-6, IL-17A, interferon-γ, or IL-10; however, the expression of transforming growth factor ß was significantly increased in the first week. In summary, GO-CT sutures may have potential as a suture material in the clinic.

Bioinspired Wear-Resistant and Ultradurable Functional Gradient Coatings.

For mechanically protective coatings, the coating material usually requires sufficient stiffness and strength to resist external forces and meanwhile matched mechanical properties with the underneath substrate to maintain the structural integrity. These requirements generate a conflict that limits the coatings from achieving simultaneous surface properties (e.g., high wear-resistance) and coating/substrate interfacial durability. Herein this conflict is circumvented by developing a new manufacturing technique for functional gradient coatings (FGCs) with the material composition and mechanical properties gradually varying crossing the coating thickness. The FGC is realized by controlling the spatial distribution of magnetic-responsive nanoreinforcements inside a polymer matrix through a magnetic actuation process. By concentrating the reinforcements with hybrid sizes at the surface region and continuously diminishing toward the coating/substrate interface, the FGC is demonstrated to exhibit simultaneously high surface hardness, stiffness, and wear-resistance, as well as superb interfacial durability that outperforms the homogeneous counterparts over an order of magnitude. The concept of FGC represents a mechanically optimized strategy in achieving maximal performances with minimal use and site-specific distribution of the reinforcements, in accordance with the design principles of many load-bearing biological materials. The presented manufacturing technique for gradient nanocomposites can be extended to develop various bioinspired heterogeneous materials with desired mechanical performances.

[Effects of Atractylodis Macrocephale Rhizoma processed by different methods on salivary amylase and D-xylose excretion rate in rats].

To observe the effects of Atractylodis Macrocephale Rhizoma processed by different methods (sulfur-fumigation, different temperatures baking and microwave sterilization) on salivary amylase and D-xylose excretion rate in spleen deficiency rats. The rats were divided into blank control group, rhubarb-induced spleen deficiency model control group, and Atractylodis Macrocephale Rhizoma experimental groups processed with different methods. Amylase colorimetric method was used to determine the activities of salivary amylase and D-xylose excretion rate was measured with O-benzylamine method. Then the correlation of salivary amylase activity and D-xylose excretion rate in urinary was analyzed. As compared with blank control group, Atractylodis Macrocephale Rhizoma baked at 100,110 ℃ can increase the unit content of rat salivary amylase and D-xylose excretion rate, with a significant difference (P<0.05). As compared with the model group, Atractylodis Macrocephale Rhizoma baked at 70 ℃ and Atractylodis Macrocephale Rhizoma with microwave treatment had stronger effects than the others, with statistically significant differences (P<0.01). Atractylodis Macrocephale Rhizoma could improve D-xylose absorption function and salivary amylase activity in spleen deficiency rats. In addition, D-xylose excretion rate in urine was positively correlated with salivary amylase activity. Atractylodis Macrocephale Rhizoma processed with different temperatures baking and microwave sterilization had little impact on salivary amylase activity and D-xylose excretion rate in urine of spleen deficiency rats, while sulfur fumigation had great effects on the above two indexes.

Fe3O4-lignin@Pd-NPs: A highly active, stable and broad-spectrum nanocomposite for water treatment.

In this work, we report an environmentally friendly renewable nanocomposite magnetic lignin-based palladium nanoparticles (Fe3O4-lignin@Pd-NPs) for efficient wastewater treatment by decorating palladium nanoparticles without using any toxic reducing agents on the magnetic lignin abstracted from Poplar. The structure of composite Fe3O4-lignin@Pd-NPs was unambiguously confirmed by XRD, SEM, TEM, EDS, FTIR, and Zeta potential. After systematic evaluation of the use and efficiency of the composite to remove toxic organic dyes in wastewater, some promising results were observed as follows: Fe3O4-lignin@Pd-NPs exhibits highly active and efficient performance in the removal of toxic methylene blue (MB) (up to 99.8 %) wastewater in 2 min at different concentrations of MB and different pH values. Moreover, except for toxic MB, the other organic dyes including Rhodamine B (RhB), Rhodamine 6G (Rh6G), and Methyl Orange (MO) can also be removed efficiently by the composite. Finally, the easily recovered composite Fe3O4-lignin@Pd-NPs exhibits well stability and reusability, and catalytic efficiency is maintained well after ten cycles. In conclusion, the lignin-based magnetism Pd composite exhibits powerful potential practical application in industrial wastewater treatment.

Influences of coexisting aged polystyrene microplastics on the ecological and health risks of cadmium in soils: A leachability and oral bioaccessibility based study.

Whether coexisting microplastics (MPs) affect the ecological and health risks of cadmium (Cd) in soils is a cutting-edge scientific issue. In this study, four typical Chinese soils were prepared as artificially Cd-contaminated soils with/without aged polystyrene (PS). TCLP and in vitro PBET model were used to determine the leachability (ecological risk) and oral bioaccessibility (human health risk) of soil Cd. The mechanisms by which MPs influence soil Cd were discussed from direct and indirect perspectives. Results showed that there was no significant difference in the leachability of soil Cd with/without aged PS. Additionally, aged PS led to a significant decrease in the bioaccessibility of soil Cd in gastric phase, but not in small intestinal phase. The increase in surface roughness and the new characteristic peaks (e.g., Si-O-Si) of aged PS directly accounted for the change in Cd bioaccessibility. The change in organic matter content indirectly accounted for the exceptional increase in Cd bioaccessibility of black soil with aged PS in small intestinal phase. Furthermore, the changes in cation exchange capacity and Cd mobility factor caused by aged PS explained the change in Cd leachability. These results contribute to a deeper understanding about environmental and public health in complicated emerging scenarios.

Incidence and prognosis of olfactory and gustatory dysfunctions related to SARS-CoV-2 Omicron strain infection in China: A national multicenter survey of 35,566 individuals.

Objective: This cross-sectional study aimed to determine the epidemiology of olfactory and gustatory dysfunctions related to COVID-19 in China. Methods: This study was conducted by 45 tertiary Grade-A hospitals in China. Online and offline questionnaire data were obtained from patients infected with COVID-19 between December 28, 2022, and February 21, 2023. The collected information included basic demographics, medical history, smoking and drinking history, vaccination history, changes in olfactory and gustatory functions before and after infection, and other postinfection symptoms, as well as the duration and improvement status of olfactory and gustatory disorders. Results: Complete questionnaires were obtained from 35,566 subjects. The overall incidence of olfactory and taste dysfunction was 67.75%. Being female or being a cigarette smoker increased the likelihood of developing olfactory and taste dysfunction. Having received four doses of the vaccine or having good oral health or being a alcohol drinker decreased the risk of such dysfunction. Before infection, the average olfactory and taste VAS scores were 8.41 and 8.51, respectively; after infection, they decreased to 3.69 and 4.29 and recovered to 5.83 and 6.55 by the time of the survey. The median duration of dysosmia and dysgeusia was 15 and 12 days, respectively, with 0.5% of patients having symptoms lasting for more than 28 days. The overall self-reported improvement rate was 59.16%. Recovery was higher in males, never smokers, those who received two or three vaccine doses, and those that had never experienced dental health issues, or chronic accompanying symptoms. Conclusions: The incidence of dysosmia and dysgeusia following infection with the SARS-CoV-2 virus is high in China. Incidence and prognosis are influenced by several factors, including sex, SARS-CoV-2 vaccination, history of head-facial trauma, nasal and oral health status, smoking and drinking history, and the persistence of accompanying symptoms.

The antiviral effect of 7-hydroxyisoflavone against Enterovirus 71 in vitro.

Enterovirus 71 (EV71) is the major causative agent of hand foot and mouth disease. And EV71 causes epidemics worldwide, particularly in the Asia-Pacific region. Unfortunately, currently there is no approved vaccine or antiviral drug for EV71-induced disease prevention and therapy. In screening for anti-EV71 candidates, we found that 7-hydroxyisoflavone was active against EV71. 7-Hydroxyisoflavone exhibited strong antiviral activity against three different EV71 strains. The 50% inhibitory concentration range was between 3.25 and 4.92 µM by cytopathic effect assay. 7-Hydroxyisoflavone could reduce EV71 viral RNA and protein synthesis in a dose-dependent manner. Time course study showed that treatment of Vero cells with 7-hydroxyisoflavone at indicated times after EV71 inoculation (0-6 h) resulted in significant antiviral activity. Results showed that 7-hydroxyisoflavone acted at an early step of EV71 replication. 7-Hydroxyisoflavone also exhibited strong antiviral activity against coxsackievirus B2, B3, and B6. In short, 7-hydroxyisoflavone may be used as a lead compound for anti-EV71 drug development.

Evaluation of Copper Levels in Dental Calculus of OSF Patients with Chewing Dried Areca-Nut Quids in Hunan Province of Mainland China.

Dental calculus is a potential material that can be used for assessing chronic exposure to trace heavy metals in oral cavity as it is a long-term reservoir. The aim of this study was to investigate the correlation between dental calculus copper levels and risk of oral submucous fibrosis (OSF) due to chewing dried areca-nut quids in Mainland China. This study included 34 OSF (grade 1) sufferers with dried areca-nut quids chewing as the patient group and 23 healthy individuals without areca-nut chewing as the control group. The dental calculus sample was obtained from all 57 participants and evaluated by inductively coupled plasma mass spectrometry (ICP-MS) for dental calculus level of copper. This work revealed that the mean copper level of dental calculus was significantly higher in OSF (grade 1) sufferers with areca-nut chewing than those in healthy individuals without areca-nut chewing (p < 0.001). This work provided an evidence to support that there may be a positive correlation between elevated levels of copper in dental calculus caused by chewing dried areca-nut quids and an increased risk of developing OSF in Mainland China.

Nonsuture anastomosis of arteries and veins using the magnetic pinned-ring device: a histologic and scanning electron microscopic study.

BACKGROUND: The goal of this study was to evaluate the performance of the magnetic pinned-ring device for nonsuture vascular anastomosis. METHODS: The magnetic pinned-ring device consists of paired magnetic rings that are coated with titanium nitride and embedded in a polypropylene shell; the rings are equipped with alternately spaced holes and titanium pins. The vascular anastomosis procedure using the novel magnetic pinned-ring device was performed on 14 mongrel dogs, and the traditional hand-sewing technique was used on 14 additional dogs. In situ end-to-end anastomoses were performed in the femoral artery and the inferior vena cava. Patency was confirmed through ultrasonographic scans at different time points as late as 24 weeks after surgery. Gross observation, histological staining, and scanning electron microscopy were used to evaluate the results at 24 weeks postoperatively. RESULTS: The time required to perform the vascular anastomosis was significantly shorter for the magnetic device than for hand sewing. A continuity of re-endothelialization was confirmed in all anastomotic stomas after 24 weeks, and neither formation of aneurysms nor thickening of the vascular wall was noted. The re-endothelialization was smooth at the anastomotic site of the magnetic device, whereas hand sewing resulted in rough and uneven re-endothelialization and the presence of visible sutures. Moreover, the endothelial cells were regularly arranged at the anastomotic site of the magnetic device, whereas different-sized and irregularly aligned endothelial cells were present at the hand-sewn anastomotic site. Use of the magnetic device was associated with significantly decreased deposition of fibrotic collagen and depressed infiltration of inflammatory cells compared with use of the hand-sewing technique. CONCLUSIONS: The magnetic pinned-ring device offers a simple, fast, reliable, and efficacious technique for nonsuture vascular anastomosis. Use of this device shortens operation time, maintains a high patency rate, and improves the healing of vascular tissue.

[Biomimetic mineralization of rod-like cellulose nano-whiskers and spectrum analysis].

Cellulose nano-whiskers/nano-hydroxyapatite composite was prepared with biomimetic mineralization using rod-like cellulose nano-whiskers as template. The cellulose nano-whiskers and cellulose nano-whiskers/nano-hydroxyapatite composite were characterized by X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS) and scanning electron microscope-energy dispersive analysis of X-rays (SEM-EDXA). Variation and distribution of carbon, oxygen, calcium, and phosphorus in the composites were studied. The morphologies and growth mechanism of nano-hydroxyapatite were analyzed. The results showed that nano-hydroxyapatite was formed on the surface of cellulose nano-whiskers; the carbon-oxygen ratio of cellulose nano-whiskers and cellulose nano-whiskers/nano-hydroxyapatite composite was 1.81 and 1.54, respectively; the calcium-phosphorus ratio of the composite was 1.70. The nucleation of nano-hydroxyapatite was around the hydroxyl groups of cellulose nano-whiskers. It is suggested that there is coordination between the hydroxyl groups of cellulose nano-whiskers and calcium ions of nano-hydroxyapatite. The nano-hydroxyapatite can distribute in the matrix of cellulose nano-whiskers. From the atomic force microscope (AFM) images, we can see that the diameter of the spherical nano-hydroxyapatite particles was about 20 nm.

Esophageal magnetic compression anastomosis in dogs.

BACKGROUND: Magnetic compression anastomosis (MCA) is a novel suture-free reconstruction of the digestive tract. It has been used in gastrointestinal anastomosis, jejunal anastomosis, cholangioenteric anastomosis and so on. The traditional operative outcomes of congenital esophageal atresia and benign esophageal stricture are poor, and there are too many complications postoperatively. AIM: To test MCA technology to reconstruct the esophagus in dogs, prior to studying the feasibility and safety of MCA in humans. METHODS: Thirty-six dogs were randomized into either the study or control group (n = 18 per group). The dogs in the study group were subjected to end-to-end esophageal anastomosis with the magnetic compression device, while those in the control group underwent hand-sewn anastomosis with 4-0 absorbable multifilament Vicryl. We used interrupted single-layer inverting sutures. The anastomosis time, gross appearance, weight and pathology of the anastomosis were evaluated at one month, three months and six months postoperatively. RESULTS: The anastomosis time of the MCA group was shorter than that of the hand-sewn group (7.5 ± 1.0 min vs 12.5 ± 1.8 min, P < 0.01). In the MCA group, X-ray examination was performed every day to locate the magnetic device in the esophagus before the magnetic device fell off from the esophagus. In the hand-sewn group, dogs did not undergo X-ray examination. One month after the surgeries, the mean weight of the dogs in the hand-sewn group had decreased more than that of the dogs in the MCA group (11.63 ± 0.71 kg vs 12.73 ± 0.80 kg, P < 0.05). At 3 mo and 6 mo after the operation, the dogs' weights were similar between the two groups (13.75 ± 0.84 kg vs 14.03 ± 0.82 kg, 14.93 ± 0.80 kg vs 15.44 ± 0.47 kg). The number of inflammatory cells in MCA group was lower than that in hand-sewn group on 1 mo after operation. CONCLUSION: MCA is an effective and safe method for esophageal reconstruction. The anastomosis time of the MCA group was less than that of the hand-sewn group. This study shows that MCA technology may be applied to human esophageal reconstruction, provided these favorable results are confirmed by more publications.

Amplifying Free Radical Generation of AIE Photosensitizer with Small Singlet-Triplet Splitting for Hypoxia-Overcoming Photodynamic Therapy.

Type-I photodynamic therapy (PDT) with less oxygen consumption shows great potential for overcoming the vicious hypoxia typically observed in solid tumors. However, the development of type-I PDT is hindered by insufficient radical generation and the ambiguous design strategy of type-I photosensitizers (PSs). Therefore, developing highly efficient type-I PSs and unveiling their structure-function relationship are still urgent and challenging. Herein, we develop two phenanthro[9,10-d]imidazole derivatives (AQPO and AQPI) with aggregation-induced emission (AIE) characteristics and boost their reactive oxygen species (ROS) generation efficiency by reducing singlet-triplet splitting (ΔEST). Both AQPO and AQPI show ultrasmall ΔEST values of 0.09 and 0.12 eV, respectively. By incorporating electron-rich anisole, the categories of generated ROS by AIE PSs are changed from type-II (singlet oxygen, 1O2) to type-I (superoxide anion radical, O2•- and hydroxyl radical, •OH). We demonstrate that the assembled AQPO nanoparticles (NPs) achieve a 3.2- and 2.9-fold increase in the O2•- and •OH generation efficiencies, respectively, compared to those of AQPI NPs (without anisole) in water, whereas the 1O2 generation efficiency of AQPO NPs is lower (0.4-fold) than that of AQPI NPs. The small ΔEST and anisole group endow AQPO with an excellent capacity for type-I ROS generation. In vitro and in vivo experiments show that AQPO NPs achieve an excellent hypoxia-overcoming PDT effect by efficiently eliminating tumor cells upon white light irradiation with good biosafety.

Iron Self-Boosting Polymer Nanoenzyme for Low-Temperature Photothermal-Enhanced Ferrotherapy.

In this work, an iron self-boosting polymer nanoenzyme was prepared by using pyrrole-3-carboxylic acid as a monomer and iron as an oxidizing agent via a simple and one-step method [hereafter referred to as FePPy nanoparticles (NPs)]. In fact, researchers previously paid negligible attention on the iron element during the polymerization reaction of polypyrrole, thus the intrinsically catalytic functions and enzymatic activities of the high iron content (wt %: 21.11%) are ignored and not fully explored. As expected, results demonstrate that the as-synthesized FePPy NPs can decompose H2O2 to generate hydroxyl radicals (•OH) which exhibit enzyme characteristics, further inducing a nonapoptotic ferroptosis pathway. Moreover, the nanoenzyme shows impressive photothermal properties which can accelerate the Fenton reactions to enhance ferroptosis. The combined photothermal and ferroptosis therapy of FePPy NPs was found to have high efficacy. With the properties of easy synthesis, high efficacy, and good biocompatibility, the FePPy NPs are considered as potential agents for cancer treatments.

OCTN2-targeted nanoparticles for oral delivery of paclitaxel: differential impact of the polyethylene glycol linker size on drug delivery in vitro, in situ, and in vivo.

Targeted nanocarriers have shown great promise in drug delivery because of optimized drug behavior and improved therapeutic efficacy. How to improve the targeting efficiency of nanocarriers for the maximum possible drug delivery is a critical issue. Here we developed L-carnitine-conjugated nanoparticles targeting the carnitine transporter OCTN2 on enterocytes for improved oral absorption. As a variable, we introduced various lengths of the polyethylene glycol linker (0, 500, 1000, and 2000) between the nanoparticle surface and the ligand (CNP, C5NP, C10NP and C20NP) to improve the ligand flexibility, and consequently for more efficient interaction with the transporter, to enhance the oral delivery of the cargo load into cells. An increased absorption was observed in cellular uptake in vitro and in intestinal perfusion assay in situ when the polyethylene glycol was introduced to link L-carnitine to the nanoparticles; the highest absorption was achieved with C10NP. In contrast, the linker decreased the absorption efficiency in vivo. As the presence or absence of the mucus layer was the primary difference between in vitro/in situ versus in vivo, the presence of this layer was the likely reason for this differential effect. In summary, the size of the polyethylene glycol linker improved the absorption in vitro and in situ, but interfered with the absorption in vivo. Even though this strategy of increasing the ligand flexibility with the variable size of the polyethylene glycol failed to increase oral absorption in vivo, this approach is likely to be useful for enhanced cellular uptake following intravenous administration of the nanocarriers.

[Diagnosis and treatment of pulmonary hypertension caused by sleep hypoventilation: analysis of 4 cases in a family].

OBJECTIVE: To summarize the experience in diagnosis and treatment of pulmonary hypertension caused by sleep hypoventilation. METHODS: The clinical data of 4 patients in a family with pulmonary hypertension caused by sleep hypoventilation, full brothers and sisters, 2 (Cases 1 and 2) being treated presently and 2 (Cases 3 and 4) being deceased and traced by family medical history, were retrospectively analyzed. RESULTS: Three of the 4 cases (cases 1, 3, and 4) were misdiagnosed as with cor pulmonale combined with pulmonary hypertension, and one case (case 2) was misdiagnosed as with primary pulmonary hypertension. Polysomnography (PSG) revealed alveolar hypoventilation-induced long period of oxygen desaturation at sleep in Cases 1 and 2, thus confirming the diagnosis. Pulmonary function test showed that the percentage of maximum inspiratory pressure (PImax) in predicted value (51.5% and 20.9%) and the maximum expiratory pressure (PEmax) in predicted value (51.3% and 29.6%) decreased, the percentage of mouth occlusion pressure (P0.1) in predicted value (141% and 133%) compensatively increased, and the respiratory muscle strength decreased in Cases 1 and 2, which suggested that there was neuromuscular disorder in these patients. Treated by noninvasive ventilation the symptoms of these 2 patients were improved and they were discharge at last. Subsequently, they were treated by long-term night noninvasive ventilation at home, and returned to normal work and life. During the follow-up for 22 and 12 months respectively after discharge, PSG showed that the alveolar hypoventilation-induced long period oxygen desaturation at sleep had been greatly improved, and echocardiogram showed that the pulmonary pressure was greatly decreased. CONCLUSION: For the patients with unexplained pulmonary hypertension, PSG monitoring and pulmonary function tests such as PImax, PEmax, and P0.1 help determine the etiology, and long-term night noninvasive ventilation at home can improve the outcome of sleep hypoventilation-induced pulmonary hypertension.

Biocompatible semiconducting polymer nanoparticles as robust photoacoustic and photothermal agents revealing the effects of chemical structure on high photothermal conversion efficiency.

Understanding the relationship between polymer chemical structure and its performance of photoacoustic imaging (PAI) and photothermal therapy (PTT) is important for developing ideal PAI/PTT agents. In this report, four semiconducting polymer nanoparticles (SPNs) with different donor-acceptor architectures are self-assembled for highly effective PAI-guided PTT. In particular, SPN1 with the longest π-conjugation length and the highest mass extinction coefficient which are beneficial for intramolecular charge transfer as well as light harvesting, exhibits the highest photothermal conversion efficiency up to 52.6%. Moreover, the as-prepared SPN1 possess good water-dispersibility, robust size-stability and excellent photothermal properties. Furthermore, the SPN1 not only exhibits a remarkable cancer cell-killing ability but also shows a prominent tumor inhibition capacity. Finally, the as-prepared water-dispersible SPN1 displays good biocompatibility and biosafety, making it a promising candidate for future biomedical applications. Considering the plenty of near-infrared absorbing semiconducting polymer available, our work provides fundamental insights for rational design and preparation of highly efficient SPN-based PAI/PTT agents for cancer theranostics.

[Residue Characteristics of Perfluorinated Compounds in the Atmosphere of Shenzhen].

In order to explore the residual characteristics of perfluorinated compounds (PFCs) in the atmosphere of Shenzhen, passive air samplers consisting of polyurethane foam (PUF) disks impregnated with XAD-4 power were deployed at 12 sites in Shenzhen from November 2014 to February 2015. Seven volatile and fifteen ionic PFCs were analyzed. The results indicated that ΣPFCs concentration ranged from 23.7 pg x m(-3) to 157 pg x m(-3) (mean: 79.0 pg x m(-3)), dominated by volatile PFCs, with 8:2 FTOITI, 6:2 FTOH, PFPeA, PFOA being the dominant compounds. The spatial distribution of volatile and ionic PFCs concentrations was the same, displaying the characteristic of "the northwest being higher than the southeast ". Furthermore, the concentrations of 6:2 FTOHs, 8:2 FTOHs, PFPeA, PFHxA and PFOA had positive correlations with PM2.5 and PM10 (P < 0.05, P < 0.01) and were more positively correlated with the levels of PM10 than those of PM2.5.