Oral microbiota in obstructive sleep apnea patients: a systematic review.

PURPOSE: Evidence suggests that patients with obstructive sleep apnea (OSA) are at increased risk of suffering from periodontitis, a chronic inflammatory disease of the tooth-supporting tissues associated with a dysbiotic oral microbiota. This systematic review aims to explore the current literature about the composition of the oral microbiota in patients with OSA compared to those without OSA. METHODS: Medline, Embase, and Cochrane Library were searched in May 2022 to identify original articles investigating the oral microbiota composition and/or oral microbiome (any microbiological technique) of patients with OSA (adults or children) vs. controls. Case report, reviews, and animal studies were excluded. RESULTS: Of over 279 articles initially identified, 8 were selected, of which 3 dealt with pediatric patients. Overall, 344 patients with OSA and 131 controls were included. Five studies used salivary samples, 2 oral mucosal swabs, and 1 subgingival plaque sample. With different methods to characterize oral microbiota, 6/8 studies observed significant differences between patients with OSA patients and controls in the composition and relative abundance of several bacteria species/genera linked to periodontitis. CONCLUSION: Within the limitations of the available literature, the present systematic review indicates that OSA and related conditions (e.g., mouth breathing) are associated with different oral microbiota compositions, which may underlie the association between OSA and periodontitis.

Free Gingival-Bone Graft in the Anterior Maxilla: A Clinical Case Report.

AIM: To present the healing, development, and long-term clinical results after a combined gingival-bone graft as an alternative treatment for the management of critical extraction sites in the esthetic zone. BACKGROUND: To enhance the knowledge of in vivo soft and hard tissue remodeling, in this case report, we observed the healing, development, and long-term clinical results after a case of a combined gingival-bone graft as an alternative treatment for the management of critical extraction sites. CASE DESCRIPTION: Autogenous grafts of gingival and bone tissue were placed in a 56-year-old female patient, where a hopeless upper left central incisor with an evident loss of both the buccal and the palatal bony plates and with endodontic problems was due for extraction. In order to obtain enough autogenous tissue for filling the defect, a cylindrical free gingival and bone graft was retrieved from the retromolar area with a trephine drill, to obtain hard and soft tissues for grafting the postextraction defect. After 6 months, following soft tissue maturation and once esthetic and natural gingival contours were achieved, the surgical site was prosthetically restored with a porcelain fused to a metal bridge and scheduled for regular follow-up. CONCLUSION: No complications were observed either from the donor site or from the recipient site. The post-treatment result was esthetically pleasing, based upon successful architectural stability of both hard and soft tissues. Although more studies are needed to confirm the beneficial use of this approach, the procedure can be considered a viable option in the management of soft and hard tissue remodeling in esthetically compromised cases. CLINICAL SIGNIFICANCE: The gingival-bone graft may be considered as an alternative treatment for the management of critical extraction sites in the esthetic area. How to cite this article: Signore A, Stepanov M, Angelis ND, et al. Free Gingival-Bone Graft in the Anterior Maxilla: A Clinical Case Report. J Contemp Dent Pract 2021;22(5):568-571.

pH Evaluation over a Period of 6 months of Two-bottle Water-based Self-etching Primers: An In Vitro Study.

AIM AND OBJECTIVE: The objective of this study was to monitor the pH stability over a period of 6 months of two-bottle self-etching (SE) primers. MATERIALS AND METHODS: Four commercially available two-bottle SE primer solutions, Adhese SE (Ivoclar Vivadent; Schaan, Liechtenstein), Clearfil SE (Kuraray; Tokyo, Japan), Contax Primer (DMG; Hamburg, Germany), and Enabond SE (Micerium; Avegno (Ge), Italy), containing water as the main solvent were selected. The pH values during a 6-month storage period at intermittent temperature were daily measured by means of a microprocessor-based pH/temperature meter and hence recorded, tabulated, and analyzed. RESULTS: The mean values of overall pH measurements and standard deviation for Adhese SE, Clearfil SE, Contax Primer, and Enabond SE are, respectively, 1.70 (±0.01), 1.72 (±0.01), 1.20 (±0.01), 1.80 (±0.01). One-way ANOVA did not detect any significant change of the mean pH values of all measurements over time. CONCLUSION: The conventional 6-months storage did not affect the pH values of the water-containing primers of two-bottle SE adhesives. CLINICAL SIGNIFICANCE: This study provides evidence that conventional storage under adequate conditions did not affect the pH values of the water-containing primers of two-bottle SE adhesives with different monomer formulations. Clinicians may rely on the known pH value of the selected SE adhesive during shelf-life.

Dental Implants with External Hex Inclined Shoulder in Full-Arch Immediate Loading Rehabilitations of the Maxilla.

Background: Coaxial implants with an inclined neck might overcome some problems related to angulation of the implant axis when using tilted implants. Therefore, the aim of the present work was to conduct a narrative review of the current literature and to present a case series comparing traditional and coaxial external hex implants in full-arch immediate loading rehabilitations of the maxilla. Methods: A total of 13 external hex tapered implants (Southern Implants) was inserted in the upper jaw of 3 patients. Each patient received two tilted implants in distal sites. In one randomly selected quadrant, the tilted implant was a standard implant, while a Co-Axis® implant with a 24° inclination of the implant shoulder was inserted on the other hemi-arch. Straight conical abutments were screwed on coaxial implants while multiunit abutments of appropriate inclination were screwed as needed on the other implants to correct their axes. Peri-implant bone level was recorded radiographically at T0 (delivery of the immediate loading prosthesis), and at 3, 6, 12, and 24 months of healing and then annually. Plaque index, probing depth, and bleeding on probing were also evaluated. Cumulative implant survival rate (CSR) was calculated, and biological or technical complications were recorded as well as the operator satisfaction towards the use of coaxial implants. Results: The preliminary data collected did not show significant differences in peri-implant tissues health and maintenance over time between the two implant types. No implants failed, and both implant types proved to be favorable for full-arch rehabilitation using tilted implants. Coaxial implants facilitated the prosthodontic procedures. However, a learning curve is required in order to optimize their insertion. Conclusions: Both implants proved to be reliable and suitable for achieving clinical success in full-arch immediate loading rehabilitations, but further research with longer follow-up and larger sample size is needed to confirm these preliminary outcomes.

Evaluation of Enamel Surfaces after Different Techniques of Interproximal Enamel Reduction.

According to the literature, interproximal enamel reduction (IER) has become a consolidated technique used in orthodontic treatments to gain space in particular situations such as dental crowding, non-extractive therapies, tooth-size discrepancies, and prevention of dental relapse. There are different methods to realize stripping, and enamel surfaces resulting after this procedure can be analyzed with SEM. The aim of this study was to analyze how different devices of IER leave the surface of the teeth. One hundred and sixty freshly extracted, intact human lower incisors were included in the study, fixed in a plaster support, and then processed with four different techniques of enamel reduction and finishing. Then, they were divided randomly into eight groups (A1-A2, B1-B2, C1-C2, D, and E), each containing twenty teeth. The A, B, and C groups were divided into two subgroups and then all the teeth were observed at SEM. Each digital image acquired by SEM showed that there were streaks on the surfaces, due to the cutter used. The results of this study showed that only group C2 (tungsten carbide bur followed by twelve steps of medium-fine-ultrafine 3M Soft Lex disks) has a few line, which is very similar to group E (untreated group), while the other groups have a lot of lines and show a rougher final surface.

Tackling Inequalities in Oral Health: Bone Augmentation in Dental Surgery through the 3D Printing of Poly(ε-caprolactone) Combined with 20% Tricalcium Phosphate.

The concept of personalized medicine and overcoming healthcare inequalities have become extremely popular in recent decades. Polymers can support cost reductions, the simplicity of customized printing processes, and possible future wide-scale expansion. Polymers with ß-tricalcium phosphate (TCP) are well known for their synergy with oral tissues and their ability to induce osteoconductivity. However, poor information exists concerning their properties after the printing process and whether they can maintain an unaffected biological role. Poly(ε-caprolactone) (PCL) polymer and PCL compounded with TCP 20% composite were printed with a Prusa Mini-LCD-®3D printer. Samples were sterilised by immersion in a 2% peracetic acid solution. Sample analyses were performed using infrared-spectroscopy and statical mechanical tests. Biocompatibility tests, such as cell adhesion on the substrate, evaluations of the metabolic activity of viable cells on substrates, and F-actin labelling, followed by FilaQuant-Software were performed using a MC3T3-E1 pre-osteoblasts line. PCL+ß-TCP-20% composite is satisfactory for commercial 3D printing and appears suitable to sustain an ISO14937:200937 sterilization procedure. In addition, the proper actin cytoskeleton rearrangement clearly shows their biocompatibility as well as their ability to favour osteoblast adhesion, which is a pivotal condition for cell proliferation and differentiation.

Multipotent Mesenchymal Cells Homing and Differentiation on Poly(ε-caprolactone) Blended with 20% Tricalcium Phosphate and Polylactic Acid Incorporating 10% Hydroxyapatite 3D-Printed Scaffolds via a Commercial Fused Deposition Modeling 3D Device.

As highlighted by the 'Global Burden of Disease Study 2019' conducted by the World Health Organization, ensuring fair access to medical care through affordable and targeted treatments remains crucial for an ethical global healthcare system. Given the escalating demand for advanced and urgently needed solutions in regenerative bone procedures, the critical role of biopolymers emerges as a paramount necessity, offering a groundbreaking avenue to address pressing medical needs and revolutionize the landscape of bone regeneration therapies. Polymers emerge as excellent solutions due to their versatility, making them reliable materials for 3D printing. The development and widespread adoption of this technology would impact production costs and enhance access to related healthcare services. For instance, in dentistry, the use of commercial polymers blended with ß-tricalcium phosphate (TCP) is driven by the need to print a standardized product with osteoconductive features. However, modernization is required to bridge the gap between biomaterial innovation and the ability to print them through commercial printing devices. Here we showed, for the first time, the metabolic behavior and the lineage commitment of bone marrow-derived multipotent mesenchymal cells (MSCs) on the 3D-printed substrates poly(e-caprolactone) combined with 20% tricalcium phosphate (PCL + 20% ß-TCP) and L-polylactic acid (PLLA) combined with 10% hydroxyapatite (PLLA + 10% HA). Although there are limitations in printing additive-enriched polymers with a predictable and short half-life, the tested 3D-printed biomaterials were highly efficient in supporting osteoinductivity. Indeed, considering different temporal sequences, both 3D-printed biomaterials resulted as optimal scaffolds for MSCs' commitment toward mature bone cells. Of interest, PLLA + 10% HA substrates hold the confirmation as the finest material for osteoinduction of MSCs.

Comparison of the Clinical Outcomes of Titanium and Zirconia Implant Abutments: A Systematic Review of Systematic Reviews.

Background: Dental implants are widely used and in order to answer to esthetic demands, zirconia has been introduced as an abutment material as an alternative to titanium. Several studies have been published on this topic, but the results have been often inconsistent. The objective of the present study is to systematically analyze the existing literature comparing clinical outcomes of titanium and zirconia implant abutments. The study was designed as a systematic review of systematic reviews. Methods: This systematic review is in accordance with the Transparent Reporting of Systematic Reviews and Meta-analyses. A MEDLINE/PubMed, Cochrane Database of Systematic Reviews and SCOPUS literature search was performed up to and including June 2021. Data were extracted independently by two reviewers and tAMSTAR2 was used to assess the quality of the systematic reviews. Results: The electronic search identified 1146 papers, and 175 duplicates were removed. After manual screening, 954 studies were excluded and the final analysis was conducted on 11 papers. Both mechanical and esthetic outcomes and biological complications were analyzed. Conclusions: It can be concluded that titanium abutments have a better mechanical resistance than zirconia ones. Plaque accumulation is reported to be slightly higher on titanium but without any significant inflammatory process. The esthetic outcomes seem to be more related to the thickness (>3 mm) of the soft tissues than to the abutment material.

The clinical and histologic efficacy of xenograft granules for maxillary sinus floor augmentation.

The objective of this study was to investigate the potential of xenograft (cancellous bovine bone) granules to form vital bone in non-natural bone-forming areas of maxillary sinuses. Fourteen sinus augmentations were performed in 14 patients. Surgical outcomes were uneventful, and sufficient radiopaque volume was present radiographically to place dental implants in all sites. Clinical reentry at 6 months revealed bone formation at the osteotomy site. Histologic evaluation of the obtained bone cores revealed that xenograft granules were integrated and surrounded by woven bone and lamellar bone that were in close contact with the particles. The average percentage of newly formed bone at 6 months was 27.5% ± 8.9%. Vital bone formation using the xenograft granules was supported by both clinical and histologic evidence.

Effects of photobiomodulation on bone defects grafted with bone substitutes: A systematic review of in vivo animal studies.

A present, photobiomodulation therapy (PBMT) effectiveness in enhancing bone regeneration in bone defects grafted with or without biomaterials is unclear. This systematic review (PROSPERO, ref. CRD 42019148959) aimed to critically appraise animal in vivo published data and present the efficacy of PBMT and its potential synergistic effects on grafted bone defects. MEDLINE, CCCT, Scopus, Science Direct, Google Scholar, EMBASE, EBSCO were searched, utilizing the following keywords: bone repair; low-level laser therapy; LLLT; light emitting diode; LEDs; photobiomodulation therapy; in vivo animal studies, bone substitutes, to identify studies between 1994 and 2019. After applying the eligibility criteria, 38 papers included where the results reported according to "PRISMA." The results revealed insufficient and incomplete PBM parameters, however, the outcomes with or without biomaterials have positive effects on bone healing. In conclusion, in vivo animal studies with a standardized protocol to elucidate the effects of PBMT on biomaterials are required initially prior to clinical studies.

Marginal quality of a full-body bulk-fill composite placed with an universal adhesive system in etch-and-rinse and self-etch mode: An in vitrostudy.

BACKGROUND: Marginal seal of a nanohybrid bulk-fill composite compared to a nanohybrid conventional composite, using a universal adhesive (UA) applied in etch-and-rinse (ER) and self-etch (SE) mode was investigated. MATERIAL AND METHODS: Thirty-six intact molars were selected and two standardized cavities in each tooth were prepared and allocated into four groups according to restorative material and etching strategy. All samples were placed in a 1% methylene blue solution for 24 h, then cut in the middle of the restorations obtaining two parts (n=144) and used for microscopic evaluation (50x) for dye penetration measurements. RESULTS: The data were analysed by ANOVA and Tukey post-hoc test (p<0.05). Marginal seal was influenced by adhesive strategy (p<0.05) but not from the composite used (p>0.05). CONCLUSIONS: Simplified restorations with nanohybrid bulk-fill composite showed comparable marginal leakage to incrementally placed nanohybrid composite. The UA used with a ER technique resulted in better marginal seal irrespective of the restorative material used. Key words:Bulk-fill composite, universal adhesive, self-etching, etch-and-rinse, marginal seal.

Flapless Surgical Approach to Extract Impacted Inferior Third Molars: A Retrospective Clinical Study.

This study aimed to compare a flapless surgical approach (FSA) with a traditional envelope flap (traditional approach (TA)). Every patient was treated with two approaches: TA and FSA. The primary outcome variables were both the discomfort during the post-operative convalescence and the correct final recovery of the impacted area. The secondary outcome variable was the average duration of the surgery. Post-operative pain and oedema were recorded. The measurements of soft tissue interface toward the distobuccal edge of the second molar were taken by periodontal probe before surgery (baseline) and 8 weeks after surgery. Statistical software was used to evaluate the data; a p-value < 0.05 was considered statistically significant. Twenty-four teeth of 12 patients (six Caucasian males and six Caucasian females, aged 23 ± 4 (17-30) years) with both lower impacted third molars (Ms3) were analysed. Considering an alpha error 0.05 that sample size allows power from 0.80 to 0.90, depending on the variable evaluated. Concerning attached gingiva, oedema and pain, the linear mixed model resulted in a statistically significant difference between the TA and FSA (p = 0.003; p < 0.01; and p = 0.018, respectively). Conversely, the model did not show a difference (p = 0.322) if pocket probing depth was considered. The FSA procedure was faster (p < 0.05) than the TA procedure (17 min and 8 s (±6 s) vs. 28 min and 6 s (±4 s), respectively). The results suggest that the FSA could be a suitable option for improving the surgical removal of lower Ms3. However, additional randomized controlled trial studies are necessary to confirm the reliability of our procedure and to verify its suitability in more complex Ms3 classifications.

Immediate Implants in the Aesthetic Zone: Is Socket Shield Technique a Predictable Treatment Option? A Narrative Review.

(1) Background. Dental implant placement in the anterior region requires extreme precision due to relatively high aesthetic demand. This narrative review aimed to analyse some of the available clinical studies of the socket-shield technique and determine its viability for dental implant survival/success and complication rates. (2) Methods. An electronic search for publications was performed using the Cochrane, PubMed-MEDLINE, Web of Science, and Google Scholar databases. All electronic searches included human clinical and animal studies and were performed by three independent examiners. (3) Results. A total of 1383 records were identified with the initial search strategies, but only 25 full texts + five abstracts clinical studies were kept after the recruitment criteria screening. The technical details, advantages, and limitations of the techniques were illustrated. (4) Conclusion. Within the limitations of the present review, it would be merely justified that immediate dental implant placement in conjunction with the socket-shield technique can be a promising strategy for dental implant therapy.

Oral Bacterial Microbiota in Digestive Cancer Patients: A Systematic Review.

The relation between the gut microbiota and human health is increasingly recognized. Recently, some evidence suggested that dysbiosis of the oral microbiota may be involved in the development of digestive cancers. A systematic review was conducted according to the PRISMA guidelines to investigate the association between the oral microbiota and digestive cancers. Several databases including Medline, Scopus, and Embase were searched by three independent reviewers, without date restriction. Over a total of 1654 records initially identified, 28 studies (2 prospective cohort studies and 26 case-controls) were selected. They investigated oral microbiota composition in patients with esophageal squamous cell carcinoma (n = 5), gastric cancer (n = 5), colorectal cancer (n = 9), liver carcinoma (n = 2), and pancreatic cancer (n = 7). In most of the studies, oral microbiota composition was found to be different between digestive cancer patients and controls. Particularly, oral microbiota dysbiosis and specific bacteria, such as Fusobacterium nucleatum and Porphyromonas gingivalis, appeared to be associated with colorectal cancers. Current evidence suggests that differences exist in oral microbiota composition between patients with and without digestive cancers. Further studies are required to investigate and validate oral-gut microbial transmission patterns and their role in digestive cancer carcinogenesis.

Ten-year results of a three-arm prospective cohort study on implants in periodontally compromised patients. Part 1: implant loss and radiographic bone loss.

OBJECTIVES: The aim of this study was to compare the long-term outcomes of implants placed in patients treated for periodontitis periodontally compromised patients (PCP) and in periodontally healthy patients (PHP) in relation to adhesion to supportive periodontal therapy (SPT). MATERIAL AND METHODS: One hundred and twelve partially edentulous patients were consecutively enrolled in private specialist practice and divided into three groups according to their initial periodontal condition: PHP, moderate PCP and severe PCP. Perio and implant treatment was carried out as needed. Solid screws (S), hollow screws (HS) and hollow cylinders (HC) were installed to support fixed prostheses, after successful completion of initial periodontal therapy (full-mouth plaque score <25% and full-mouth bleeding score <25%). At the end of treatment, patients were asked to follow an individualized SPT program. At 10 years, clinical measures and radiographic bone changes were recorded by two calibrated operators, blinded to the initial patient classification. RESULTS: Eleven patients were lost to follow-up. During the period of observation, 18 implants were removed because of biological complications. The implant survival rate was 96.6%, 92.8% and 90% for all implants and 98%, 94.2% and 90% for S-implants only, respectively, for PHP, moderate PCP and severe PCP. The mean bone loss was 0.75 (+/- 0.88) mm in PHP, 1.14 (+/- 1.11) mm in moderate PCP and 0.98 (+/- 1.22) mm in severe PCP, without any statistically significant difference. The percentage of sites, with bone loss > or =3 mm, was, respectively, 4.7% for PHP, 11.2% for moderate PCP and 15.1% for severe PCP, with a statistically significant difference between PHP and severe PCP (P<0.05). Lack of adhesion to SPT was correlated with a higher incidence of bone loss and implant loss. CONCLUSION: Patients with a history of periodontitis presented a lower survival rate and a statistically significantly higher number of sites with peri-implant bone loss. Furthermore, PCP, who did not completely adhere to the SPT, were found to present a higher implant failure rate. This underlines the value of the SPT in enhancing the long-term outcomes of implant therapy, particularly in subjects affected by periodontitis, in order to control reinfection and limit biological complications.

Mucogingival prosthetic approach to treat implant failure in the esthetic area: clinical considerations and digital analysis.

Soft tissue augmentation techniques have become crucial to improve tissue volume and quality in periodontal and peri-implant dental surgery. A clinician's knowledge of the principle of flap design and management is a key aspect for treatment success, particularly in the esthetic area. Implant failures in the esthetic area are one of the most challenging situations in modern dentistry, and often cases have to be resolved through multidisciplinary treatments in which soft tissue management and patient selection are substantial aspects. Ridge defects are commonly treated with bone regeneration-like techniques in order to place implants. However, in young patients, where implant treatment should be carefully selected, fixed prosthetic restorations in combination with mucogingival surgery could be a successful option to enhance esthetics. The present case report describes a treatment approach for implant failure in the esthetic area in young patients, consisting of a combination of connective tissue platform technique, resective surgery, and a Maryland bridge restoration.

Interaction between Laser Light and Osteoblasts: Photobiomodulation as a Trend in the Management of Socket Bone Preservation-A Review.

Bone defects are the main reason for aesthetic and functional disability, which negatively affect patient's quality of life. Particularly, after tooth extraction, the bone of the alveolar process resorbs, limiting the optimal prosthetic implant placement. One of the major pathophysiological events in slowly- or non-healing tissues is a blood supply deficiency, followed by a significant decrease in cellular energy amount. The literature shows that photons at the red and infrared wavelengths can interact with specific photoacceptors located within the cell. Through this mechanism, photobiomodulation (PBM) can modify cellular metabolism, by increasing mitochondrial ATP production. Here, we present a review of the literature on the effect of PBM on bone healing, for the management of socket preservation. A search strategy was developed in line with the PRISMA statement. The PubMed and Scholar electronic databases were consulted to search for in vivo studies, with restrictions on the year (<50 years-old), language (English), bone socket preservation, and PBM. Following the search strategy, we identified 269 records, which became 14, after duplicates were removed and titles, abstract and inclusion-, exclusion-criteria were screened. Additional articles identified were 3. Therefore, 17 articles were included in the synthesis. We highlight the osteoblast-light interaction, and the in vivo therapeutic tool of PBM is discussed.

Simultaneous photoablative and photodynamic 810-nm diode laser therapy as an adjunct to non-surgical periodontal treatment: an in-vitro study.

BACKGROUND: The use of lasers at different wavelengths has been proposed in combination with conventional non-surgical periodontal treatment in order to improve the clinical outcome of periodontal disease. However, the clinical use of laser photonic energy is still the subject of research and debate because the antibacterial activity of the laser is dependent upon method, laser parameters, quantity of bacteria, species selected and photosensitizers used. METHODS: We evaluated the in-vitro bactericidal activity of 810 nm diode-laser irradiation in simultaneous photoablative and photodynamic mode against the major pathogenic bacterial organisms associated with periodontal inflammation and disease. We used indocyanine green as photosensitizer and the high-energy density of 161.7 J/cm2 or 215.0 J/cm2 for the photoablative-photodynamic irradiation. RESULTS: The bacteria were drastically affected by the 215.0 J/cm2 irradiation in the presence of indocyanine green. In fact, the number of Porphyromonas gingivalis and Prevotella intermedia was reduced by 99.9% (P<0.001), while the number of Fusobacterium nucleatum, Aggregatibacter actinomycetemcomitans, Tannerella forsythia and Actinomyces viscosus decremented by 83.3% (P<0.01), 86.8% (P<0.05), 75% (P<0.01) and 78.7% (P<0.001), respectively. P. gingivalis and P. intermedia were the only bacteria that were sensitive to the treatment with indocyanine green dye and 161.7 J/cm2 of laser irradiation (P<0.001). CONCLUSIONS: Our preliminary in-vitro data suggest that simultaneous photoablative-photodynamic irradiation could be a promising therapy against a wide range of bacteria involved in periodontal disease. We believe that further additional in-vivo investigation is necessary, to enable a more complete picture of effectiveness within a clinical setting to be established. In addition, the use of a simultaneous photoablative-photodynamic therapy is suggested to reduce treatment time, without compromising the efficacy against the periodontal pathogens.

Ten-Year Results of a Prospective Cohort Study on Acid-Etched and Airborne Particle-Abraded Implant Surfaces: A Comparative Study.

Dental implants are intended to provide long-term reliable dental restorations. Limited data exist on the comparison between different implant surfaces. This study aims to clarify whether there is a difference between airborne particle- abraded and acid-etched (SLA implants) and only acid-etched surfaces (Osseotite) in healthy and periodontally compromised patients. After comprehensive evaluation of all 109 patients, including nonsurgical and surgical therapy for the treatment of periodontal disease, 109 implants were placed according to the manufacturer's guidelines. Each treatment site was examined radiographically 3 to 6 months after the final coronal restorations were placed. Patients were enrolled in the follow-up maintenance program, and radiologic evaluations were carried out at 5 and 10 years. Data recorded from 91 patients who completed the final 10-year follow-up were included in the analysis (SLA: n = 50; Osseotite: n = 41). At 10 years, the difference between bone-to-implant distances (DIBs) for SLA and Osseotite was significantly different (P = .001; 95% confidence interval: 0.55, 1.89 mm). Mean ± SD DIB for SLA implants was 2.1 ± 1.1 mm and 0.9 ± 2.1 mm for Osseotite implants. The overall survival rates of SLA and Osseotite implant surfaces were high during the observation period. History of previous periodontal disease plays an important role in the incidence of complications, regardless of the surface type.

Effectiveness of Human Placental Allograft for Root Coverage: A 5-Year Case Series on Clinical and Esthetic Outcomes.

This investigation was designed to evaluate the long-term effectiveness of human placental allograft in root coverage procedures in terms of clinical and esthetic outcomes. Thirteen patients with 28 maxillary or mandibular recession defects > 4 mm deep were reexamined at 6 months and 5 years postoperatively. Overall, mean percentage of root coverage decreased from 65.58% ± 16.45% to 49.75% ± 19.40% with a greater stability of the gingival margin in the mandible. At 5 years, 18 sites maintained at least 2 mm of keratinized tissue. Gingival color and texture blended well with adjacent soft tissue area in 78.6% of treated sites.