Influence of degree of conversion on the biocompatibility of different composites in vivo.

PURPOSE: To evaluate the relationship between biocompatibility and degree of monomer conversion of composites used to bond brackets to enamel, porcelain, resin, or metal surfaces at different time intervals. MATERIALS AND METHODS: Twenty-four male Wistar rats were used, divided into 4 groups (n = 6) as follows: group C (control, polyethylene), group TCC (Transbond Color Change), group QC (Quick-Cure), and group EB (Eagle Bond). These substances were inserted into subcutaneous tissue. The events of inflammatory infiltrate, edema, necrosis, granulation tissue, multinuclear giant cells, young fibroblasts, and collagen formation were analyzed. The degree of conversion was evaluated by the Fourier method using infrared spectroscopy. Biocompatibility and degree of conversion were statistically analyzed using the Kruskal-Wallis and Dunn tests, and ANOVA and Tukey's test, respectively (p < 0.05). RESULTS: The composites caused a small amount of inflammatory infiltrate, edema, and granulation tissue at all experimental time intervals, showing a gradual reduction over time (p > 0.05). Group TCC showed the highest amount of fibroblasts and EB the smallest at the time interval of 15 days (p = 0.035). Group TCC showed the highest amount of collagen fibers and EB the smallest throughout the experiment; there was a significant difference in terms of collagen fibers between groups QC and EB, which differed from the control at 7 days (p = 0.006), and between groups EB and TCC (p = 0.018) at 30 days. Monomer conversion ranged from 64.1% in group EB at 7 days to 85.3% in group TCC at 30 days. CONCLUSION: Transbond Color Change composite showed a higher degree of conversion and a better healing process compared to Eagle Bond composite at 15 and 30 days. Quick-cure composite demonstrated a better degree of conversion and healing process than that of Eagle Bond, but this was not statistically significantly different.

In vitro effect of S. mutans biofilm on fluoride/MDPB-containing adhesive system bonded to caries-affected primary dentin.

PURPOSE: To evaluate the effect of storage in S. mutans culture or water on the durability of fluoride and MDPB-containing adhesive system on artificial caries-affected primary dentin. METHODS: Dentin flat surfaces of primary molars were submitted to artificial caries development using S. mutans biofilm. CAPD cavities were restored with Adper Scotchbond Multi-Purpose (SBM) or Clearfil Protect Bond (CPB) and they were serially sectioned into sticks (1 mm2 cross-sectional area) and stored in S. mutans biofilm for 3 days, in deionized water for 3 months and afterwards subjected to microtensile bond strength (µTBS) test. A control group was submitted to immediate TBS testing. Two-way ANOVA and Tukey's tests were used. Failure sites were observed by SEM and classified as cohesive (dentin or resin) and adhesive failures. RESULTS: The control group showed the highest µTBS values (MPa) for both SBM (25.2 ± 8.5) and CPB (15.6 ± 6.1) adhesive systems. A significant decrease in µTBS values after S. mutans biofilm and water storage was observed for SBM (18.7 ± 5.7 and 17.4 ± 4.1, respectively) and CPB (13.9 ± 5.2 and 13.7 ± 4.8, respectively), but no difference was found between them. The highest percentage of adhesive failure was observed for all groups. However, cohesive failure in dentin was observed in a higher percentage for SBM than CP.

In vitro effect of calcium nanophosphate and high-concentrated fluoride agents on enamel erosion: an AFM study.

BACKGROUND: Calcium nanophosphate paste can provide ions to remineralize enamel. There are, however, no data available about the remineralizing effect of this paste on the prevention of enamel erosion, when compared with highly concentrated fluoride agents. AIM: To analyze the effect of calcium nanophosphate paste, fluoride gel, and varnish to protect against enamel erosion using surface Knoop hardness (KNH) and atomic force microscopy (AFM). DESIGN: Forty enamel blocks (4 × 4 mm) of third molars were used for 4 groups (n = 10): 1.23% fluoride gel (Fluorgel-DFL(®) ); calcium nanophosphate paste (Desensibilize NanoP-FGM(®) ); fluoride varnish (Duraphat-Colgate(®) ) and control (without agent). The specimens were immersed in cola drink for 5 min and 2 h in artificial saliva, 4× per day for 5 days. The agents were applied before the first erosive cycle. KNH values were obtained before and after the erosive challenge. The surface morphology was evaluated by AFM. anova, Tukey's, and T-Student tests were applied. RESULTS: After erosion, no significant difference was found for KNH among gel, nanophosphate, and varnish groups; however, they showed higher KNH than control group. Gel and nanophosphate paste showed a protective layer formation on enamel surface by AFM. CONCLUSIONS: The calcium nanophosphate paste showed similar protection against enamel erosion compared with high-concentrated fluoride agents, even containing lower fluoride concentration.

Assessment of groundwater quality in a region of endemic fluorosis in the northeast of Brazil.

The aim of this study was to estimate the risk for caries and fluorosis in a desertification area, applying the calcium/fluoride concentration ratio of underground water and the quality of water in a selected geographical region. This study was performed in the municipality of São João do Rio do Peixe, located in the tropical semiarid lands of Brazil. A total of 111 groundwater samples were collected. Fluoride concentration varied from 0.11 to 9.33 mg/L. Thirty percent of all samples analyzed showed values above 1.5 mg/L, while 64 % were above the ideal limit of 0.7 mg/L. Mean calcium concentration was 47.6 mg/L, and 14.4 % of all samples presented values above the WHO acceptable limits. The proportional value of calcium/fluoride in water showed that only 12 % of the samples were suitable for dental caries prevention with minimal risk for dental fluorosis. Mapping of the fluoride distribution indicated that approximately 2,465 people could be affected by dental fluorosis and 1,057 people might be affected by skeletal fluorosis. It can be concluded that, in addition to fluoride, many water parameters were not suitable for the drinking water. Mapping out calcium/fluoride ratio may indicate areas of water suitability for caries control, whereas the fluoride concentration solely can indicate the areas with the risk for fluorosis. This approach can be relevant for health authorities for identifying communities where dental caries or dental fluorosis is prevalent.

Possible Relationship Between the Oral and Gut Microbiome, Caries Development, and Obesity in Children During the COVID-19 Pandemic.

The COVID-19 pandemic has brought health damage and socioeconomic disruptions, together with lifestyle disorders around the world. Children are one of the most commonly affected, mainly due to social isolation and changes in eating habits and physical activities. This way, the risk of weight gain and obesity is possibly enhanced, as well as poor oral hygiene conditions and early childhood caries (ECC) development during the lockdown. In children under 6 years of age, ECC is defined as carious lesions in one or more primary teeth, with or without cavitation. Importantly, alterations in the oral microbiome caused by changes in children lifestyles have much more than a local impact on oral tissues, interplaying with the gut microbiome and influencing systemic environments. Recent studies have been exploring the oral health conditions, eating habits, and weight gain in the childhood population during the COVID-19 pandemic; however, there is a lack of information concerning the association among oral and gut microbiome, dental caries, and obesity in the COVID-19 era. In this context, this review aimed at analyzing a possible relationship between the oral and gut microbiome, caries, and obesity in children during the COVID-19 pandemic.

Which self-etch acidic composition may result in higher dental bonds at the long-term? A network meta-analysis review of in vitro studies.

OBJECTIVES: This review evaluated the effects of the acidic composition of self-etch (SE) adhesives at the long-term bond strengths to dentin and enamel. DATA: The review followed the PRISMA Extension Statement for network meta-analysis. Studies were identified by a systematic search in PubMed, Web of Science, and Scopus databases. STUDY SELECTION: The inclusion criteria were in vitro studies that evaluated bond strength data of samples analyzed at both immediate and long-term (after aging simulation) periods and that were bonded to sound dentin/enamel using SE adhesives, with at least one group of adhesives being based on 10-MDP (10-methacryloyloxy-decyl-dihydrogen-phosphate; control) and the other group being comprised of alternative acidic monomers. Statistical analyses were conducted using two methods: standard pairwise meta-analysis (SPMA) and Bayesian network meta-analysis (NMA). Heterogeneity was assessed by using the Cochran Q test and I2 statistics. RESULTS: From 5220 studies identified, 87 met the eligibility criteria and 83 were meta-analyzed. Seventeen adhesives were based on 10-MDP and 44 systems were based on alternative acids. The resin-dentin/enamel bonds were predominantly reduced after aging (∼84% of cases). From the SPMA findings, the following acidic compositions showed lower bond strength values (effect size: mean difference [MD] with 95% confidence interval [95% CI]) than 10-MDP: 4-META (MD -4.99, 95% CI: -7.21, -2.78; p<0.001); sulfonic acids (MD -9.59, 95% CI -12.19, -6.98; p<0.001); unspecified phosphate esters (MD -8.89, 95% CI -17.50, -0.28; p = 0.04); or mixed acids (MD -11.0, 95% CI -13.62, -8.38; p<0.001). The dental bonds were benefited from the presence of 10-MDP upon longer aging (>6 months). From the NMA probabilistic findings, adhesives based on 10-MDP and phosphonic acids ranked as having the best and the worst bonding potential to dentin, respectively. More than one composition (phosphonic acids and mixed acids) ranked similarly to 10-MDP in enamel. The studies scored as having moderate risk of bias (58.6%), followed by low (39.1%) and high (2.3%) risk of bias. CONCLUSION: 10-MDP is an outstanding acidic monomer that contributes to higher bonds to dentin at the long-term. In enamel, there is no evidence that one acidic composition prevails over the other. CLINICAL SIGNIFICANCE: The acidic composition of SE adhesives affects the resistance of dental bonds after simulated aging, with 10-MDP playing a significant role in the adhesion to dentin but not to the enamel. REGISTRATION NUMBER: This report is registered at the Open Science Framework (osf.io/urtdf).

Influence of NaOCl irrigation and water storage on the degradation and microstructure of the resin/primary dentin interface.

PURPOSE: To evaluate the influence of NaOCl irrigation and water storage on the degradation and microstructure of the resin/dentin interface of primary teeth bonded with three different adhesive systems using the microtensile bond strength test (µTBS) and scanning electron microscopy (SEM). MATERIALS AND METHODS: Ninety sound primary molars were used. Eighteen groups were formed according to different adhesive systems (Adper Single Bond 2, SB; Clearfil Protect Bond, CP; Adper Prompt L-Pop, APL) with or without 0.5% NaOCl irrigation and water-storage time (24 h, 45 days, 90 days). The middle dentin was exposed. In the NaOCl group, NaOCl irrigation was performed for 30 min, and all groups were restored with composite (Charisma). Sticks with a 1-mm2 cross-sectional area were prepared for the µTBS test. The data were analyzed by ANOVA and Tukey's test (p < 0.05). The failure modes, presence or absence of resin tags, and the resin/ dentin interface were evaluated by SEM, and data were analyzed using Cochran-Mantel-Haenszel statistics (p < 0.05). RESULTS: The µTBS of APL was significantly lower than the other groups regardless of treatment and storage time. A significant decrease of µTBS values after 90 days of water storage occurred only in the non-NaOCl irrigation groups. After 90 days of storage, resin tags partially disappeared in APL and CP, and in SB, 100% of the resin tags remained. CONCLUSION: The choice of adhesive system is one of the factors when bonding to primary dentin is considered. In this study, the etch-and-rinse and the two-bottle self-etching adhesive system produced the highest µTBS values irrespective of prior NaOCl irrigation even up to 90 days of water storage.

Analyses of biofilms accumulated on dental restorative materials.

PURPOSE: To qualitatively and quantitatively assess the architectural arrangement of microorganisms in biofilm developed on the surface of different restorative materials: ceramic (C), resin composite (RC), conventional (CGIC) and resin-modified glass-ionomer cements (RMGIC). METHODS: Streptococcus mutans was used to develop a biofilm that adhered to the surfaces of the selected material disks in 30 days. The specimens were stained and analyzed by confocal laser scanning microscopy and COMSTAT. Among biofilm properties, mean thickness, total bio-volume, roughness coefficient and surface-to-volume ratio were investigated, as well as characteristics of the distribution and architecture of viable/nonviable cells in the biofilm. RESULTS: Only the mean biofilm thickness was statistically significantly different among the restorative materials tested. C and RC accumulated the thickest biofilms. Qualitative analysis showed cellular aggregates and fluid-filled channels penetrating to a considerable depth of the biofilm. In addition, images demonstrated a progression of more viable cells in superficial regions of the biofilm to proportionally more nonviable cells in the deeper regions of the biofilms near the disk.

Effect of chitosan nanoparticles on the inhibition of Candida spp. biofilm on denture base surface.

OBJECTIVES: Chitosan nanoparticles (ChNPs) have antifungal effects, however there is a lack of information about the effects of ChNPs against Candida biofilm on denture base surface. This study investigated the ChNPs effect against C. albicans biofilm adhesion and formation, and against Candida spp. biofilm on heat-cured acrylic resin. DESIGN: The ChNPs were synthetized (3800 µg/mL) and characterized by infra-red spectrophotometry and transmission electron microscopy. The minimum inhibitory/fungicidal concentrations (MIC/MFC) against Candida spp. were determined. The time-kill assay and changes on C. albicans micromorphology were evaluated. The % inhibition of ChNPs on C. albicans biofilm formation and reduction were investigated using 1 min and 8 h exposure. Candida biofilm was developed on resin surfaces and ChNPs were applied every 8 h for 5 days. After, fungal cells were counted (CFU/mL) and the surface roughness (Ra) and vickers microhardness (HV) of resin were analysed. For all experiments, sodium hypochlorite (NaOCl) was used as control. Data were analyzed by ANOVA, Tukey and paired t-tests (α = 0.05). RESULTS: The MIC80% of ChNPs was 30.1 µg/mL. ChNPs at 4 MIC showed complete inhibition in the time-kill assays. Blastoconidia cells were predominant after ChNPs application. The % inhibition ChNPs on C. albicans was proportional to its concentration, regardless of the exposure time. ChNPs decreased the CFU/mL of Candida spp. and showed lower alteration of HV and Ra values of resin surface compared to NaOCl. CONCLUSIONS: The ChNPs inhibited C. albicans biofilm, reduced Candida biofilm on resin and caused small changes in roughness and hardness of acrylic resin surface.

Presence of mutans streptococci and Candida spp. in dental plaque/dentine of carious teeth and early childhood caries.

This study determined the presence of mutans streptococci and Candida spp. in supragingival dental plaque and infected dentine of caries-free children, with early childhood caries and caries. Pooled samples of dental plaque and infected dentine were collected from 56 children aged 1-5 years, which were divided into 3 groups: early childhood caries (ECC); caries and caries-free. Infected dentine was collected in ECC and caries groups to compare the frequency of these microorganisms in the collected sites. The samples were inoculated in SB20 and SA medium, for mutans streptococci and Candida spp., respectively, and incubated at 37 degrees C for 48 h. Colony growth was verified and the identification was performed by biochemical tests and CHROMagar Candida. Fisher's test or chi-square (chi(2)) were applied (p=0.05). The more prevalent species were S. mutans and Candida albicans in ECC (85.4% and 60.4%, respectively), independently of the sample site. S. mutans only was significantly associated with carious teeth, whether in early childhood caries or not. However, the frequency of C. albicans in ECC was higher when compared to caries and caries-free groups. There is a significant association between the presence of C. albicans and early childhood caries.

In vitro effects of nano-hydroxyapatite paste on initial enamel carious lesions.

PURPOSE: The purpose of this study was to analyze the protective effect of remineralizing agents on enamel caries lesions using surface Knoop microhardness testing (KHN) and atomic force microscopy (AFM). METHODS: Forty-eight human enamel blocks were assigned to four groups (N=12): (1) control (without agent); (2) fluoride varnish (Duraphat); (3) nano-HAP paste (Desensibilize Nano P); and (4) casein phosphopeptide-amorphous calcium phosphate (CPP-ACP) paste (MI Paste Plus). Incipient caries-like lesions were artificially developed. Cariogenic challenge (pH-cycling) was performed for seven days. The pastes were applied before each immersion in demineralization solution, and the varnish was applied only once. KHN values were obtained at baseline, after incipient enamel lesion, and after challenge. The percentage of surface hardness recovery (%SMHR) was performed, and the surface morphology was evaluated by atomic force microscopy (AFM). ANOVA, Tukey's, and student paired t tests were applied at P<.05. RESULTS: After the cariogenic challenge, the nano-HAP group showed significantly higher KHN and %SMHR values than varnish. The CPP-ACP group showed no increase in KHN. The nano-HAP group showed, via AFM, a protective layer formation with globular deposits on the surface. CONCLUSION: SMHR and AFM morphology revealed that nano-hydroxyapatite paste showed a protective effect against in vitro enamel caries development.

In vivo biocompatibility versus degree of conversion of resin-reinforced cements in different time periods.

This study focused on test the null hypothesis that there is no difference between the degree of conversion and biocompatibility of different resin reinforced glass ionomer cements (RRGICs). Forty-eight male Wistar rats were used, distributed into four groups (n = 12), as follows: Group C (Control, polyethylene), Group FOB (Fuji Ortho Band), Group UBL (Ultra band Lok), and Group MCG (Multicure Glass), in subcutaneous tissue. The events of edema, necrosis, granulation tissue, multinuclear giant cells, young fibroblasts, and collagen formation were analyzed at 7, 15, and 30 days. The degree of conversion was evaluated by the Fourier method. Biocompatibility and degree of conversion were assessed using the Kruskal-Wallis and Dunn tests, and ANOVA and Tukey's test, respectively (P < 0.05). It was observed that, there was significant difference between Groups FOB and UBL for the presence of young fibroblasts at 15 days (P = 0.034) and between the Control and MCG Groups for the presence of multinucleated giant cells at 30 days (P = 0.009). Monomer conversion increased progressively until day 30, with significant difference between Group FOB and Groups UBL and MCG (P = 0.013) at 15 days. The null hypothesis was partially accepted, Fuji Ortho Band showed a less monomer conversion and a smaller number of young fibroblasts in the time of 15 days.

In vitro Effect of Erosive Challenge on Surface Microhardness of Orthodontic Composites

Objective: To evaluate in vitro the effect of erosive challenge and continuous immersion in cola drink on surface microhardness of orthodontic composites. Material and Methods: Forty samples of three composites (Transbond XT, Quick Cure and Ortho Cem) were prepared (4 x 2 mm) and distributed into 4 groups (n=10): erosive challenge, artificial saliva immersion (control 1), continuous cola immersion and artificial saliva immersion (control 2). Erosive challenge was performed 4 times per day (5 min) in cola drink for 2 h in artificial saliva for 7 days. Samples of continuous cola immersion group were soaked in cola drink for 5 weeks and the beverage was renewed every two days. Control samples were immersed in artificial saliva for 7 days (control 1) and 5 weeks (control 2). Vickers microhardness (VHN) measurements were performed before and after erosive challenge and continuous immersion. Data were evaluated by paired Student's T-test, ANOVA one-way and Tukey tests (α = 0.05). Results: After 7 days of erosive challenge, there was no statistical difference between VHN values before and after erosive challenge and artificial saliva immersion. However, after 5 weeks of cola drink and artificial saliva immersion, significant reduction in VHN values was observed for all composites when compared to baseline values, and specimens immersed in cola drink showed lower VHN compared to those immersed in saliva, regardless of composite composition. Conclusion: After 7 days of erosive challenge, there was no alteration in superficial VHN of orthodontic composites. However, after 5 weeks of immersion in cola drink, significant reduction of VHN values was observed for all composites.

Mineral distribution and CLSM analysis of secondary caries inhibition by fluoride/MDPB-containing adhesive system after cariogenic challenges.

OBJECTIVE: To evaluate the inhibition zone formation (IZ) and mineral distribution along the interface of adhesive systems either containing fluoride and antibacterial primer or not, after chemical and biological artificial caries challenges. METHODS: Forty-eight third molars were used. Artificial caries was developed with S. mutans in a 4mm x 4mm area of occlusal dentin surface. Carious dentin was removed and cavities were restored with Adper Scotchbond Multi-Purpose (SBM) and Clearfil Protect Bond (CPB) (n=24). Samples were submitted to secondary caries development by chemical (C) (acidic gel) or biological (B) (S. mutans culture) methods for 5 days. Four groups were tested (n=12): (1) SC (SBM+C); (2) SB (SBM+B); (3) CC (CPB+C); (4) CB (CPB+B). The IZ and outer lesion (OL) formations were analyzed by confocal laser scanning microscopy (CLSM). The distribution of calcium (Ca) and phosphorus (P) content along the interface was analyzed by micro X-ray fluorescence spectrometer by energy-dispersive (microEDX). RESULTS: The frequency of IZ formation and mean values of IZ thickness differed among the groups. The CC group presented the lowest OL depth. microEDX analysis showed that CPB had the highest mineral loss by the biological method, but the lowest mineral loss by the chemical method. SC and SB groups showed intermediate values of mineral loss. CONCLUSION: The mineral loss along the dentin/restoration interface was affected by the artificial caries method, and hybrid layer formation by adhesive systems used. The adhesive system containing fluoride and antibacterial primer did not prevent secondary caries formation.

Confocal laser scanning microscopic analysis of the depth of dentin caries-like lesions in primary and permanent teeth.

This study analyzed comparatively, by confocal laser scanning microscopy (CLSM), the depth of caries-like lesions produced by biological and chemical artificial models in permanent and primary dentin. Six primary molars and six premolars were used. The occlusal enamel was removed and a nail polish layer was applied on the specimens, except for a 4 x 2 mm area on dentin surface. Half of specimens were immersed in acid gel for 14 days (chemical model) and the other half was immersed in BHI broth with S. mutans for 14 days (biological model). After development of artificial caries, the crowns were longitudinally sectioned on the center of the carious lesion. Three measurements of carious dentin depth were made in each specimen by CLSM. Measurements depths were compared between the caries models and between tooth types by one-way ANOVA and Tukey test (alpha=5%). For permanent teeth, the biological model showed significantly higher (p<0.05) caries depth values than the chemical model. For primary teeth, no statistically significant difference (p>0.05) was found between the caries models. The artificial caries model influenced caries depth only in permanent teeth. There was no difference in carious dentin depth between permanent and primary teeth, regardless of the artificial caries model.

Tratamientos menos invasivos: utilización de los sistemas de aire abrasivo y puntas cvd

Los sistemas de preparación cavitaria a base de aire abrasivo y puntas CVD fueron desarrollados para confeccionar cavidades con características diferentes a las obtenidas por los sistemas convencionales. Trabajos anteriores demuestran la efectividad de corte de ambos sistemas favoreciendo de esa manera la preparación de cavidades de forma más conservadora lo que permite la práctica de una “Odontología mínimamente invasiva”. El presente trabajo tiene por objetivo presentar por medio del relato de un caso clínico la forma de utilización, características de las preparaciones así como las ventajas y desventajas que ambos sistemas presentan. Los dos sistemas fueron utilizados para la remoción de lesiones de caries inicial en las superficies oclusales de los primeros molares permanentes de un paciente de 9 años de edad. En los molares 16 y 46 fue utilizado el Sistema de Aire Abrasivo y en los molares 26 y 36 el sistema de puntas CVDentusâ. De las observaciones realizadas podemos concluir que estos sistemas fueron confortables para el paciente debido a las características de funcionamiento y eficiencia de los aparatos, contribuyendo de esta forma para la colaboración y buen comportamiento del paciente, así como, facilitar la acción del operador.

The cavity systems preparation with abrasive air and burs CVD were developed to make cavities with characteristics different from the obtained by the conventional systems. Previous works demonstrate to the effectiveness of cut of both systems favoring of that way the preparation of cavities of more preservative form what the practice of a "minimally invasive Dentistry" allows. The present work must by objective present by means of the story of a clinical case the use form, characteristics of the preparations as well as the advantages and disadvantages that both systems display. Both systems were used for the removal of damages of initial decay in permanent the oclusal surfaces of first molars of a patient of 9 years of age. In molars 16 and 46 the System of Abrasive Air was used and in molars 26 and 36 the system of CVDentus. of the made observations we can conclude that these systems were comfortable for the patient due to the characteristics of operation and efficiency of the appliances, contributing of this form for the collaboration and good behavior of the patient, as well as, to facilitate the action of the operator.

A preparação dos sistemas da cavidade com CVD abrasivo do ar e das queimaduras foi desenvolvida a faça cavidades com as características diferentes do obtido pelos sistemas convencionais. Precedente os trabalhos demonstram à eficácia do corte de favorecer de ambos os sistemas daquele maneira a preparação das cavidades do formulário mais preservativo que a prática "um Odontologia minimamente invasiva" reserva. o trabalho atual deve pelo objetivo atual por meio da história de um caso clínico o formulário do uso, características das preparações as vantagens e desvantagens que ambos os sistemas indicam. Ambos os sistemas foram usados para a remoção dos ferimentos da deterioração inicial no permanente superfícies dos oclusales de primeiros molares de um paciente de 9 anos de idade. Nos molares 16 e 46 o sistema do ar abrasivo foram usados e nos molares 26 e 36 o sistema de CVDentus. Das observações feitas nós podemos concluir que estes sistemas eram confortáveis para paciente devido às características da operação e da eficiência dos instrumentos, contribuir deste formulário para a colaboração e comportamento bom do paciente, para facilitar a ação do operador.