Biodegradable polymer membrane used as septal splint.

The treatment of a crooked nose is one of the most challenging rhinoplastic procedures. Correction of the abnormally curved or fractured septum has been reported using mostly scoring techniques, septoplasty and submucous resection techniques; cartilaginous spreader grafts can also be sutured to the distorted septum. Extracorporal septal straightening and repositioning/refixation is another useful but difficult technique. A common problem of septal cartilaginous grafting techniques is to harvest enough straight cartilage to correct the deformity. (Other donor sites such as rib cartilage are used, but harvesting additional cartilage is a time-consuming procedure and carries the risk of donor site morbidity.) Recent studies have been published using alloplastic internal splinting of the deformed septum. The use of poly p-dioxanone foils and porous polyethylene has been suggested before. In this study, a novel grafting material, a PolyMax membrane that has potential advantages over both materials, is presented. This is a porous biodegradable polymer made out of 70:30 poly(L-lactide-co-D,L-lactide) that remains stable for at least 7 months. Poly p-dioxanone loses its stability after only 2 months, whereas porous polyethylene is a permeable material that is controversial due to possible complications in cases of membrane exposure and infection. In this preliminary report the PolyMax membrane was used successfully in 3 patients.

Fixation of zygomatic fractures with a biodegradable copolymer osteosynthesis system: short- and long-term results.

Biodegradable osteosynthesis devices can be viewed as addition to, not yet replacement for conventional metal osteosynthesis materials. In a series of 65 patients with zygomatic fractures, a short-term complication/sequelae rate of 22.8% and a long-term complication rate of 9.4% were recorded. Lactosorb plates, panels and screws were the only devices used for osteosynthesis. All complications associated with the biodegradable material could be considered minor and were resolved by the use of minor surgical procedures or conservative measures. The results of this study indicate that treatment of zygomatic fractures with biodegradable osteosynthesis material has no major long-term adverse effects beyond the total material resorption time.

Invitro study of adherent mandibular osteoblast-like cells on carrier materials.

Augmentation of the craniofacial region is necessary for many aesthetic and reconstructive procedures. Tissue engineering offers a new option to supplement existing treatment regimens. In this procedure, materials composed of hydroxyapatite (HA), of synthetic or natural origin, are used as scaffolds. The aim of this study was to evaluate the effects of three HA materials on cultured human osteoblasts in vitro. Explant cultures of cells from human alveolar bone were established. Human osteoblasts were cultured on the surface of HA calcified from red algae (C GRAFT/Algipore), deproteinized bovine HA (Bio-Oss) and bovine HA carrying the cell binding peptide P-15 (Pep Gen P-15). Cultured cells were evaluated with respect to cell attachment, proliferation and differentiation. Cells were cultured for 6 and 21 days under osteogenic differentiation conditions, and tissue-culture polystyrene dishes were used as control. The ability of cells to proliferate and form extracellular matrix on these scaffolds was assessed by a DNA quantification assay, protein synthesis analysis and by scanning electron microscopical examination. Osteogenic differentiation was screened by the expression of alkaline phosphatase. The osteoblastic phenotype of the cells was monitored using mRNA levels of the bone-related proteins including osteocalcin, osteopontin and collagen Type I. We found that cells cultured on C GRAFT/Algipore) and Pep Gen P-15 showed a continuous increase in DNA content and protein synthesis. Cells cultured on Bio-Oss showed a decrease in DNA content from Day 6 (P < 0.05) to Day 21 (P < 0.0001) and protein synthesis on Day 21 (P < 0.005). Alkaline phosphatase activity increased in cells grown on C GRAFT/Algipore and Pep Gen P-15 in contrast to cells grown on Bio-Oss, in which the lowest levels of activity could be observed on Day 21 (P < 0.05). Reverse transcriptase polymerase chain reaction analysis confirmed the osteoblastic phenotype of the cells grown on all three materials throughout the whole culture period. The results of our in vitro study show that the differences in metabolic activity of cells grown on HA materials are directly related to the substrate on which they are grown. They confirm the excellent properties of HA carrying the cell binding peptide P-15 and HA calcified from red algae as used in maxillofacial surgery procedures.

Basic research and 12 years of clinical experience in computer-assisted navigation technology: a review.

Computer-aided surgical navigation technology is commonly used in craniomaxillofacial surgery. It offers substantial improvement regarding esthetic and functional aspects in a range of surgical procedures. Based on augmented reality principles, where the real operative site is merged with computer generated graphic information, computer-aided navigation systems were employed, among other procedures, in dental implantology, arthroscopy of the temporomandibular joint, osteotomies, distraction osteogenesis, image guided biopsies and removals of foreign bodies. The decision to perform a procedure with or without computer-aided intraoperative navigation depends on the expected benefit to the procedure as well as on the technical expenditure necessary to achieve that goal. This paper comprises the experience gained in 12 years of research, development and routine clinical application. One hundred and fifty-eight operations with successful application of surgical navigation technology--divided into five groups--are evaluated regarding the criteria "medical benefit" and "technical expenditure" necessary to perform these procedures. Our results indicate that the medical benefit is likely to outweight the expenditure of technology with few exceptions (calvaria transplant, resection of the temporal bone, reconstruction of the orbital floor). Especially in dental implantology, specialized software reduces time and additional costs necessary to plan and perform procedures with computer-aided surgical navigation.

Distraction osteogenesis with subperiosteal devices in edentulous mandibles.

Nine patients with severely atrophic edentulous mandibles were treated by distraction osteogenesis with subperiosteal distractors for vertical augmentation of the anterior alveolar bone before insertion of implants. All the patients had severe complications and we conclude that the use of subperiosteal devices for vertical augmentation of edentulous mandibles is hazardous and offers no advantage over other surgical methods.

Tricalcium phosphate-based biocomposites for mandibular bone regeneration--A histological study in sheep.

The present study investigated the suitability of three different absorbable biocomposites for the repair of critical sized bone defects created at the mandibular angle of adult sheep. Each biocomposite was composed of a three-dimensional individualized polylactide scaffold, containing a tricalcium phosphate biomaterial (chronOS). Either autologous bone marrow (chOS/BoneMarrow) or coagulation factor XIII (chOS/FactorXIII) was added to the biomaterial for osteopromotion. Venous whole blood (chOS/Blood) added to the biomaterial served as a control. A total of 18 adult sheep were used for implantation studies, subdivided into three groups of six animals each. After 12 weeks of observation, the animals were sacrificed and the mandibles were retrieved for qualitative and quantitative histologic assessment within three regions of interest (transitional zone, center, and periphery) throughout the biocomposites. Successful bone regeneration was defined by the absence of scaffold deformation and the presence of new bone formation within the biocomposites. In histomorphometry, only chOS/BoneMarrow showed elevated area fractions of newly formed bone in all regions of interest (transitional zone 50.7 ± 7.5, center 31.9 ± 9.3, periphery 23.1 ± 13.5). This led to preservation of the macroscopic scaffold structure in all specimens. Zero hurdle regression confirmed this by validating the factor biocomposite as significant (p < 0.001) for regeneration success. In our experiment, chOS/BoneMarrow was the only biocomposite passing the hurdle of regeneration in all three regions of interest. In contrast, bone formation was less pronounced and uniform in chOS/FactorXIII and chOS/blood-containing specimens. In these groups, scaffolds showed obvious to significant deformation. Overall, autologous bone marrow showed the most promising results in our experimental setting. As opposed to reports in the literature, we could not confirm the suitability of coagulation factor XIII to promote bone formation, since bone formation rates were comparable only to those of the control venous blood.

Reconstruction of the maxilla with a double musculoperiosteal flap in connection with a composite calvarial bone graft.

A new technique is shown for a one-stage reconstruction of the mucosa of the floors of the nose and maxillary sinus, the bone structures of the maxilla and the hard palate, as well as the mucosal layers of the hard and soft palates and vestibulum. To accomplish this coverage, a vascularized calvarial bone graft with temporal muscle from one side is combined with a vascularized temporal muscle flap from the other side to achieve a three-layer "sandwich" plasty. The advantage of this procedure is reconstruction of the complete maxillary defect with the possibility of denture rehabilitation and the avoidance of oronasal fenestration. Besides the possible complication of insufficient vascularization of the bone and muscle grafts, the donor defect in the calvarial bone and the missing muscle for mastication are to be considered.

Experimental and clinical results of new advances in the treatment of facial trauma.

Theoretical considerations and photoelastic and mechanical experiments showed us the progression from metal wires to metal plates in different systems. In the midface there is no question about stabilization by miniplate systems. For mandibular fracture treatment, there is a discussion going on at present about the use of stable maxisystems versus less stable minisystems. Our clinical experience of 15 years indicates that there is no further demand for strict stable fixation of mandibular fractures, and we were encouraged to use less stable systems with similar good results, as our follow-up and statistical evaluation showed. To continue the simplification of osteosynthesis methods we are performing experiments with resorbable materials. Early results show fracture healing comparable with that found with plate-and-screw systems. Our clinical experience has shown that there is no longer any question about the ability of stable fracture treatment by means of osteosynthesis. However, there still is the question of how functional such fracture treatment might be.

MRI-based stereolithographic models of the temporomandibular joint: technical innovation.

A new technique of manufacturing dual-colour stereolithographic models of hard and soft tissues of the temporomandibular joint (TMJ) is presented. Sagittal T1/PD weighted magnetic resonance (MR) images of joints with and without disc displacement were obtained in the closed and open mouth positions. Individual interactive contour identification of bony structures and the articular disc followed by binary interpolation provided the data for the generation of acrylic TMJ models. Three dimensional in vivo visualization of the articular disc in relation to bony structures in the closed and open mouth positions allows a new perception of normal and pathological TMJ anatomy.

Lactosorb panel and screws for repair of large orbital floor defects.

In a series of five patients with extensive fractures of the orbital floor, we used a biodegradable sheet for bridging of the bony defects. To achieve optimal support of the orbital contents in their anatomically correct position, we fixed the sheet with at least two resorbable screws to the infraorbital rim. This new technique appears to be superior to conventional methods because it offers reproducible results without the need for secondary interventions.

Computer-aided navigation in secondary reconstruction of post-traumatic deformities of the zygoma.

Augmented reality technology was used in 5 patients for secondary reconstruction of post-traumatic unilateral deformities of the zygomaticomaxillary complex. Three electromagnetic sensors interfaced to a computer-aided navigation system (ARTMA Biomedical Inc.) were utilized. The computer navigation procedure was planned by drawing graphic lines on the CT scan at the level of the zygomatic arch, representing the outer surface of the zygoma. The desired position of the displaced zygoma was planned by mirroring from the healthy side, using a virtual mid-sagittal plane. These virtual graphics were presented intraoperatively on a TV monitor and also on the surgeon's see-through head-mounted display. Correct reduction was assumed when the virtual line representing the position of the zygoma before the osteotomy reached the virtual line defined preoperatively as the desired position. The advantages of the technique presented are that a complete exposure of the zygomatic bone is no longer necessary, and coronal and subciliary incisions may be avoided unless enophthalmos correction has to be carried out, which was in fact necessary in 2 patients. The results of zygomatic reconstruction have been satisfactory in all 5 patients.

Endosteal implants in the irradiated lower jaw.

Since 1990 Endosteal implants have been inserted in the irradiated lower jaw at our clinic. IMZ implants have been used for dental rehabilitation in 26 patients (21 male, 5 female) suffering from squamous cell carcinomas stage T2-T4 136. The implants were either placed in local bone and soft tissue (group 1, n = 60 implants), or in local bone after marginal mandibulectomy and transplanted soft tissue (group 2, n = 26 implants), or in transplanted bone and soft tissue (group 3, n = 52 implants). Life-table analysis according to Kaplan-Meier demonstrated a 3-year implant survival rate of 87.8% in Group 1, 69.1% in Group 2 and 58.3% in Group 3. There was no statistical significant difference in the amount of marginal bone loss and the degree of marginal infection between the three groups (P > 0.29). Major complications: A mandibular fracture passing through an empty implant socket 8 months after implant loss (Group 2) was caused by postradiation-osteonecrosis; implant removal and bone resection was mandatory. The poor results of the bone graft group may be explained by two patients, in whom simultaneous placement of implants in nonvascularized bone grafts was carried out, intraoral tissue breakdown led to graft failure and loss of the implants (n = 10).

The L-shaped osteotomy for vertical callus distraction in the molar region of the mandible: a technical note.

The following report refers to a well described surgical procedure using a prototype vertical distractor developed in Cologne in cooperation with Martin Medizintechnik GmbH. The surgical technique has been refined by an L-shaped osteotomy stabilized posteriorly by a miniplate to limit the amount of callus regeneration in the molar region where no increase in vertical height is required. The surgical technique with its advantages and one complication is described as used in four patients undergoing six distraction treatments.

Positioning of dental implants using computer-aided navigation and an optical tracking system: case report and presentation of a new method.

A navigation system for computer-aided surgery (Virtual Patient System, VPS) has been described in previous studies for different indications in oral and maxillofacial surgery. The aim of the system is the intraoperative transfer of preoperative planning on radiographs or CT scans on the patient, in real-time, and independent of the position of the patient's head. Until now an electromagnetic tracking system has been used for intra-operative position measurement. For placement of dental implants, the electromagnetic tracking system is not suitable since the motor of the implant drill leads to a considerable distortion of the magnetic field, thus direct visualization of drilling the implant socket was not possible. To overcome this problem, an optical tracking system which is not disturbed by conductive materials was integrated in the VPS system. The first patient operated on with this system had a posttraumatic loss of the upper incisors; three implants have been placed according to the prosthetic axis previously planned on radiographs and CT scans. The experience gained in this intervention led to the conclusion that computer-aided surgery provides a valuable tool in implant dentistry.

Placement of endosteal implants in the zygoma after maxillectomy: a Cadaver study using surgical navigation.

Endosteal implants facilitate obturator prosthesis fixation in tumor patients after maxillectomy. Previous clinical studies have shown, however, that the survival of implants placed into available bone after maxillectomy is generally poor. Nevertheless, implants positioned optimally in residual zygomatic bone provide superior stability from a biomechanical point of view. In a pilot study, the authors assessed the precision of VISIT, a computer-aided surgical navigation system dedicated to the placement of endosteal implants in the maxillofacial area. Five cadaver specimens underwent hemimaxillectomy. The cadaver head was matched to a preoperative high-resolution computed tomograph by using implanted surgical microscrews as fiducial markers. The position of a surgical drill relative to the cadaver head was determined with an optical tracking system. Implants were placed into the zygomatic arch, where maximum bone volume was available. The results were assessed using tests for localization accuracy and postoperative computed tomographic scans of the cadaver specimens. The localization accuracy of landmarks on the bony skull was 0.6 +/- 0.3 mm (average +/- SD), as determined with a 5-df pointer probe; the localization accuracy of the tip of the implant burr was 1.7 +/- 0.4 mm. The accuracy of the implant position compared with the planned position was 1.3 +/- 0.8 mm for the external perforation of the zygoma and 1.7 +/-1.3 mm for the internal perforation. Eight of 10 implants were inserted with maximal contact to surrounding bone, and two implants were located unfavorably. Reliable placement of implants in this region is difficult to achieve. The technique described in this article may be very helpful in the management of patients after maxillary resection with poor support for obturator prostheses.

Midfacial degloving: an alternative approach for traumatic corrections in the midface.

Midfacial degloving was used as an approach in 14 patients to correct post-traumatic deformities in the midface. In eight patients, deformities in the naso-orbito-ethmoid region were corrected by orbitonasal osteotomy, telecanthus correction, orbital grafting and nasal augmentation procedures. Zygomatic osteotomies were performed in five patients with orbitozygomatic deformity. In one patient, a midface fracture (Le Fort II/III) was reconstructed after midfacial degloving. By combination of transoral vestibular, intranasal and preseptal transconjunctival incisions a complete degloving of the midface up to the nasofrontal angle and the zygoma prominence was possible. All osteotomies could be completed after midfacial degloving. Additional coronal incisions were not required. Orbitonasal osteotomies for nasal lengthening as well as fixation of the medial canthal ligament by a miniplate could be performed under direct vision. There were no postoperative complications such as stenosis of the nasal aperture or disturbances of the mimic musculature. Midfacial degloving offers good exposure, specially of the central part of the midface, without leaving an external scar. It is useful for reconstructive procedures in patients after midface trauma.

Orbital floor reconstruction with an alloplastic resorbable polydioxanone sheet.

The orbital floor is frequently reconstructed after blow-out fractures or midface fractures to avoid a relapse of the repositioned orbital tissue and to prevent enophthalmos. A total of 31 patients underwent reconstruction of internal orbital wall fractures with a resorbable 0.25 mm or 0.5 mm-thick polydioxanone implant (PDS). Skeletal and functional outcome was evaluated retrospectively with regard to fracture size. Fracture size was graded as small, moderate or large by CT scans and operating records. Two of the 25 patients with small or moderate defects showed an enophthalmos of 2-3 mm. Five of the six patients with large defects or two orbital wall fractures had enophthalmos. The scar that formed after implant resorption was to weak to provide adequate support of the globe or to compensate the enlarged orbital volume. Endoscopic follow-up examination of 12 patients showed yielding of the scar in the orbital floor already in moderate defects. Eight patients had diplopia in extreme gaze and two had significant diplopia. Blow-out and midfacial fractures with small to moderate defects in the orbital floor (up to a size of 2.5 cm2) can be reconstructed by polydioxanone sheet to avoid enophthalmos. Polydioxanone implants should only be used in cases without massive orbital fat herniation. The scar formed after implant resorption may influence functional outcome.

Horseshoe Le Fort I osteotomy in combination with endosteal implants--a median-term follow-up study.

Fourteen patients with Class VI resorption of the maxilla were treated with horseshoe Le Fort I osteotomy. In 11 cases, the procedure was followed by the placement of endosteal implants. In six patients, simultaneous placement of implants was carried out, while in five patients this was done in a second procedure. Ten patients wore their implant-supported dentures. In one patient, 5/8 implants were lost due to nonintegration. Three patients lost one implant each. The total number of implants placed was 76, and the survival rate of the implants was 88.1%. In the one-step procedure (n = 42), the survival rate was 84.8%; in the two-step procedure (n = 34), 92.3%. In comparison of the one-step to the two-step procedure, there was no statistically significant difference (P > 0.11) between the amount of marginal peri-implant bone loss and the condition of the peri-implant soft tissues as measured 2 years after implantation.

Solitary plasmocytoma of the mandible--a combined approach for treatment and reconstruction.

A 44-year-old man presented with a solitary plasmocytoma in the left mandible. After neoadjuvant radiation therapy and chemotherapy, a bone marrow biopsy was taken for cryopreservation. In simulation surgery, tumour resection and primary reconstruction were planned on an individual stereolithographic 3-D skull model. Radical tumour resection and primary reconstruction using a microvascular iliac crest bone graft was performed. In case of extensive osteolysis and/or mandibular asymmetry due to tumourous bone enlargement, preoperative model planning has proved to be a useful tool for primary reconstruction. In the three-year follow up, the patient showed no recurrence of disease.

Fixation of zygomatic fractures with a new biodegradable copolymer osteosynthesis system. Preliminary results.

In a prospective study, a new biodegradable osteosynthesis material for the facial skeleton has been used in 27 patients with zygomatic fractures. In the six-month follow-up period, the first ten patients showed clinically and radiologically uneventful healing of bone. There were no implant-related complications. The main advantages of the new material are its malleability when heated, enabling fast adaptation to the bone surface, and the avoidance of a second operation for implant removal.