A modified protocol for restorative implant abutment selection by using computer-aided design and computer-aided manufacturing technology.

STATEMENT OF PROBLEM: Implant abutment selection is complex because of the numerous factors involved. Computer-aided design (CAD) technology allows for the virtual selection and placement of abutments after all parameters have been precisely measured. The outcome of this new protocol should be validated. PURPOSE: The purpose of this in vitro study was to validate a new digital protocol in which abutment selection is made through a CAD software program, the abutments are virtually placed, and the restoration is then designed based on the virtual abutments to fit the actual abutments when delivered to the implants intraorally. MATERIAL AND METHODS: A cast with 2 parallel implants was scanned 10 times. Then, 2 abutments were placed and scanned 10 times. Twenty identical superstructures were designed and manufactured to simulate the clinical situation of a 3-unit fixed partial denture, screw-retained to 2 implants. These were divided into 2 groups-A, real abutment and B, virtual abutment-and then compared by means of digital and optical measurements. RESULTS: No significant differences were detected for the measurements between the control and test groups in either the x-axis or y-axis; significant differences were found for the median value of the measurements obtained from both groups regarding the z-axis (P=.046). The mean gap in the virtual abutment group was 50 µm and 35 µm in the real abutment group. CONCLUSIONS: Superstructures produced after the virtual selection and placement of intermediate restorative abutments compared favorably with those produced after the digitalization of actual abutments and placement in the implant model, thus validating the proposed digital protocol for virtual abutment selection and placement.

Cement AH Plus Adhesiveness Assessment Associated with Mineral Trioxide Aggregate in Different Proportions (Push-out Test).

AIM: The aim of the study is to evaluate the adhesiveness of the AH Plus plug cement, plus the mineral trioxide aggregate (MTA) in different proportions, through the push-out test. MATERIALS AND METHODS: The authors utilized fifty premolars with a single conduit, which were divided into five groups with 10 teeth. In group 1, the authors performed an obturation with AH Plus cement, group 2 was filled with AH Plus cement with 10% of MTA, group 3 was filled with AH Plus cement plus 20% MTA, group 4 was filled with AH Plus with 30% of MTA and group 5 filling was performed with the MTA Fillapex endodontic cement. The specimens were sectioned in 2 mm slices and submitted to the push-out test in a universal testing machine. The authors cataloged the data and follow through with statistical analysis based on T-test for independent samples, with a significance level of 5%. RESULTS: There was no statistical difference in group 2. Groups 3 and 4 presented better adhesion than AH Plus cement and MTA Fillapex. There was no statistical difference between the AH Plus cement and the MTA Fillapex. CONCLUSION: The authors concluded that the addition of MTA in the proportion of 10% to the AH Plus does not alter its adhesive property. They also observed that when the MTA increased by 20% and 30% there was an increase in the adhesiveness of the material when submitted to the push-out test. CLINICAL SIGNIFICANCE: The relevance of this study refers to the MTA inducing the deposition of mineralized tissue. However, it is necessary to compare it to the AH Plus cement considered "Gold Standard" in physical-chemical properties tests.

Microscopy in Endodontics: A Bibliometric Survey.

Background: Microscopy is a resource used in endodontics as an aid in the study of pulp and periapical pathologies; it has allowed Endodontics to become more accurate, less invasive and has enabled greater chances of success in treatment. We aimed to map the scientific production on "microscopy" and "endodontics" in the databases, the ISI Web of Knowledge/Web of Science tm. Methods: This bibliometric survey was conducted using ISI Web of Knowledge/Web of Science database, in the time frame between the years 1945 and 2016, the first being found in 1981. Results: Overall, 287 articles were identified. These articles are published in 63 different journals and were written by 1145 authors who have links to 336 institutions, located in 46 countries. To achieve these articles, 5,668 references were used, with an average of approximately 20 references per article. In the national literature the number of studies on the subject is broad compared to the international literature. Conclusion: The bibliometric review showed the potential of microscopy in clinical practice, the continuity of the investigation, in view of the need to expand knowledge on the topic that remains relevant.

Digital Impressions in Implant Dentistry: A Literature Review.

INTRODUCTION: Digital impressions in implant dentistry rely on many variables, and their accuracy, particularly in complete edentulous patients, is not well understood. Aim. The purpose of this literature review was to determine which factors may influence the accuracy of digital impressions in implant dentistry. Emphasized attention was given to the design of the intra-oral scan body (ISB) and scanning techniques. MATERIALS AND METHODS: A Medline, PubMed and EBSCO Host databases search, complemented by a hand search, was performed in order to select relevant reports regarding the appliance of digital impressions in implant dentistry. The search subject included but was not limited to accuracy of digital impressions in implant dentistry, digital scanning techniques, the design and material of the ISBs, and the depth and angulation of the implant. The related titles and abstracts were screened, and the remaining articles that fulfilled the inclusion criteria were selected for full-text readings. RESULTS: The literature search conducted for this review initially resulted in 108 articles, among which only 21 articles fulfilled the criteria for inclusion. Studies were evaluated according to five subjects: accuracy of digital impressions in implant dentistry; the design and material of the intra-oral scan bodies; scanning technique; the influence of implants depth/angulations on the digital impression and accuracy of different intra-oral scanner devices. CONCLUSIONS: The accuracy of digital impressions in implant dentistry depends on several aspects. The depth/angulation of the implant, the experience of the operator, the intra-oral scanner used, and environmental conditions may influence the accuracy of digital impressions in implant dentistry. However, it seems that ISBs' design and material, as well as scanning technique, have a major impact on the trueness and precision of digital impressions in implant dentistry. Future research is suggested for the better understanding of this subject, focusing on the optimization of the ISB design and scanning protocols.

High-Power LED Units Currently Available for Dental Resin-Based Materials-A Review.

The pursuit of less time-consuming procedures led to the development of high-power light-curing-units (LCU) to light-cure dental-resin-based-materials. This review aims to describe high-power light-emitting-diode (LED)-LCUs, by a bibliometric systematization of in vitro and in vivo studies. The research-question, by PICO model, aimed to assess the current knowledge on dentistry-based high-power LED-LCUs by analyzing to what extent their use can promote adverse events on materials and patients' oral condition when compared to low-power LED-LCUs, on daily dental practice. PubMed and B-on database search focused on high-power (≥2000 mW/cm2) LED-LCUs outputs. Studies assessing performance of high-power LED-LCUs for light-curing dental-resin-based-materials were included. From 1822 screened articles, 21 fulfilled the inclusion criteria. Thirty-two marketed units with high levels of radiant emittance (≥2000 mW/cm2 up to 6000 mW/cm2) were identified. Most output values vary on 2000-3000 mW/cm2. The highest output found was 6000 mW/cm2, in FlashMax™P3. Reports suggest that light-curing protocols with lower emittance irradiance and longer exposure outperforms all other combination, however in some clinical procedures high-power LED-LCUs are advocated when compared to low-power LED-LCUs. Moreover, long time exposures and over-curing can be dangerous to the biological vital pulp, and other oral tissues. Evidence showing that high-power LCUs are the best clinical option is still very scarce.

The Impact of Dental Midline on Asymmetric Faces: Perspective of Laypersons and Dentists.

BACKGROUND: The objective was to determine if asymmetric facial features, nasal and chin deviations, affect the perception of attractiveness of a dental midline angulation, and if it is consistent among both dentists and laypeople. It was also analyzed if factors, such as the sex, age group of the participants and the dentist's area of operation are relevant in their assessment. METHODS: A cross-sectional study, approved by the Ethics Committee of Fernando Pessoa University. From a symmetrical facial model (SFM) image, a natural-looking asymmetrical face was created. Based on this asymmetric facial model six images were created, with different directions and degrees of inclination of the dental midline. In total, 236 laypersons and 242 dentists completed the online questionnaire where they rated the self-perception of attractiveness of the eight images (VAS scale from 0 to 10). Non-parametric comparisons (IBM© SPSS Statistics vs. 27.0, p < 0.05). RESULTS: The results showed a significant difference in the perception of attractiveness between laypeople and dentists. This finding was consistent regarding every image, except for the SFM. The factors, sex of the people participating and dentist's area of operation, seemed only to contribute to a significant difference in the perception when it came to the SFM. The perceived attractiveness of the images, for dentists and laypersons, did not differ by age group of the participant, apart from images 6 and 8. CONCLUSIONS: Dentists are more rigorous about dental midline inclinations than laypersons. The perception of attractiveness was affected by the age group and sex of the participants and the dentist's area of operation.

Aesthetic Preference in the Transverse Orientation of the Occlusal Plane in Rehabilitation: Perspective of Laypeople and Dentists.

The present study had a convenience sample with 236 laypeople and 242 dentists who completed an online questionnaire to choose the most attractive image among six pairs for comparison. Control image: symmetric (parallelism between occlusal plane (OP), commissural line (CL), and interpupillary line (IL)). Change of Control, obtaining three images with a 3-degree inclination of the labial commissures. Image A: OP parallel to IL; Image B: OP parallel to CL; Image C: OP at 1.5 degree mean angulation between IL and CL. Non-parametric comparison (IBM© SPSS Statistics vs. 27.0, p < 0.05). The "Dentists" group's decreasing order of preference (attractiveness) of the images is: Control > A > C > B (p < 0.05). In the "Lay" group, it is: Control > A > (C not ≠ B). Dentists significantly prefer more the Control and Image A than laypeople (p < 0.001). Sex (single exception in laypeople), age, and dentist's area of activity did not interfere in the perception of attractiveness. Dentists and laypeople preferred the Control when compared to images with CL canted. In the existence of CL inclination, the preference of the groups was the IL as a reference for OP orientation, with the mean angulation or coincident with the CL being considered less aesthetic.

Effects of Different Undersizing Site Preparations on Implant Stability.

As immediate loading protocols are becoming more frequent, the primary stability of implants has become an essential criterion for the osseointegration of dental implants. Based on this, the objective of this study was to understand the influence of different undersized surgical preparation sites on the insertion torque (IT) and implant stability quotient (ISQ). Four different site-preparation protocols were performed on fresh humid type III bovine bone: one control, the standard protocol recommended by the manufacturer (P1), and three variations of undersized techniques (P2, P3 and P4). The implant used was VEGA by Klockner Implant System. The sample size was n = 40 for each of the four groups. A torquemeter was used to measure the IT, and the ISQ was measured with a Penguin RFA. Both variables showed a tendency to increase as the preparation technique was reduced, although not all the values were statistically significant (p < 0.05) when comparing with the standard preparation. The preparations without a cortical drill, P2 and P4, showed better results than those with a cortical drill. Given the limitations of this study, it can be concluded that reducing the implant preparation can increase both the IT and ISQ. Removing the cortical drill is an effective method for increasing implant stability, although it should be used carefully.

Decontamination of Gutta-percha Cones employed in Endodontics.

The gutta-percha cones used in endodontic treatment are produced in aseptic conditions and their composition includes zinc oxide, which is responsible for antibacterial activity. However, there is the possibility of microbial contamination by manipulation, aerosol or during storage. Although several chemical agents have been tested for their decontamination, there is no consensus on the best disinfection protocol to be used. The aim of this study was to evaluate the decontamination of gutta-percha cones contaminated with the bacteria Enterococcus faecalis, by using chlorhexidine digluconate (CHX) and sodium hypochlorite (NaClO) at different concentrations for short exposure times. For this purpose, gutta-percha cones (size 40) were selected at random from a sealed box and immersed for 1 min in a microbial suspension. Then they were immersed in specific Petri dishes for different groups containing: CHX 2%, NaClO 1% or NaClO 2.5% for 30 s or 1 min, and subsequently placed in tubes containing BHI broth. After incubating the tubes for 48 h, it was observed that 1% and 2.5% NaClO and 2% CHX were effective for decontaminating the cones at those exposure time intervals. Microbial growth was detected in one of the replicates of the group with CHX applied for 30 s. To prevent the possibility of failures at this stage, the exposure time of gutta-percha cones to the decontaminating agent should not be reduced.

Os cones de guta-percha utilizados no tratamento endodôntico são produzidos em condições assépticas e possuem óxido de zinco em sua composição, responsável pela atividade antibac-teriana. No entanto, existe a possibilidade de contaminação microbiana por manipulação, aerossol ou seu armazenamento. Embora vários agentes químicos já tenham sido testados para sua descontaminação, não há consenso sobre o melhor protocolo de desinfecção a ser usado. Nosso objetivo foi avaliar a descontaminação de cones de guta-percha contaminados com a bactéria Enterococcus faecalis, utilizando digluconato de clorexidina (CHX) e hipoclorito de sódio (NaClO) em diferentes concentrações e tempos de exposição curtos. Para esse fim, 40 cones de guta-percha foram selecionados aleatoriamente, de uma caixa selada e imersos por 1 min em uma suspensão microbiana. Em seguida, foram imersos em placas de Petri específicas para diferentes grupos contendo: CHX 2%, NaClO 1% ou 2,5%, nos tempos de exposição de 30s e 1min e subseqüentemente imersos em tubos contendo caldo BHI. Após incubação dos tubos por 48 h, observou-se que NaClO 1% e 2,5% e CHX 2% foram eficazes para a descontaminação dos cones nesses intervalos de tempo de exposição. Em uma das réplicas do grupo com CHX aplicado por 30s foi detectado crescimento microbiano. O tempo de exposição dos cones de guta-percha ao agente de descontaminação não deve ser reduzido para evitar a possibilidade de falhas nesse estágio.

Penetration degree of sealer in artificial lateral canal after passive ultrasonic irrigation with EDTA for different times.

The aim of this study was to evaluate the degree of penetration of obturation cement in artificial lateral canals after Passive Ultrasonic Irrigation (PUI) with ethylenediaminetetraacetic acid (EDTA) for different times. Fifty upper molar palatine roots were used, in which two artificial lateral canals were made at distances of 7 and 3 millimeters from the root apex. After instrumentation and drying the canal, the final toilet stage was performed on five groups (n = 10), as follows: G1 - EDTA 17% + PUI for 10 seconds; G2 - EDTA 17% + PUI for 20 seconds; G3 - EDTA 17% + PUI for 30 seconds; G4 - EDTA 17% + PUI for 60 seconds; G5 - EDTA 17% + activation by instrument R50 for 5 minutes (Control). The canals were sealed by the single cone technique, and after 72 hours, sectioned in two planes transverse to the artificial canal, to see the degree of penetration of the sealing cement. In the radiographic analysis, there was no statistical difference (p> 0.05) between groups in the two artificial lateral canals. However, PUI of EDTA for 60 seconds produced a significant difference in the degree of penetration of the sealing cement (p <0.05) at 7 mm from the apex. Therefore, PUI with EDTA for 60 seconds promoted a higher degree of penetration of the obturator cement in the artificial lateral canal.

O objetivo deste trabalho foi avaliar o grau de penetração do cimento obturador em canais laterais artficiais, após Irrigação Ultrassonica Passiva (IUP) do ácido etilenodiaminotetracético (EDTA), em diferentes tempos. Foram utilizadas 50 raízes palatinas de molares superiores, e em seguida confeccionados dois canais laterais artificiais a 7 e 3 milímetros do ápice radicular. Após a instrumentação e secagem dos canais, foi iniciada a etapa de toillet final, de acordo com os seguintes grupos (n=10): G1- EDTA 17%+IUP durante 10 segundos; G2 - EDTA 17%+IUP durante 20 segundos; G3 - EDTA 17%+IUP durante 30 segundos; G4- EDTA 17%+IUP durante 60 segundos; G5- EDTA 17%+ativação pelo instrumento R50 durante 5 minutos (Controle). Os canais foram obturados pela técnica do cone único, e após 72 horas, seccionados em dois planos transversais dos canais artificiais, para se visualizar o grau de penetração do cimento obturador. Na análise radiográfica, não houve diferença estatística (p>0,05) entre os grupos, nos dois canais laterais artificiais. Entretanto, a IUP do EDTA por 60 segundos conseguiu um obter resultado significativo, sobre o grau de penetração do cimento obturador (p<0,05) a 7 milímetros do ápice. Portanto, a IUP do EDTA no tempo de 60 segundos promoveu maior grau de penetração do cimento obturador nos canais laterais artifciais.

Accuracy of Implant Casts Generated with Conventional and Digital Impressions-An In Vitro Study.

PURPOSE: The aim of this study was to compare the accuracy of digital dental impressions with the accuracy of impressions obtained via conventional techniques. METHODS: Two different master models were created, one with parallel implants (model 1) and the other with non-parallel implants (model 2). These reference master models included 4 Klockner KL RP implants (Klockner Implant System SA, Barcelona, Spain), which were juxta-placed and equidistant in the intermentoneal region. In model 1 the implants were placed parallel to each other, whereas in model 2 the implants were placed such that there was a divergence angle of 15° between the more distal implants, and a convergence angle of 15° between the two central implants. A total of four types of impressions were obtained from model 1 (four groups, n = 10 each), including closed tray impressions with replacement abutments; open tray impression groups for dragging copings, without splinting; open tray impressions for ferrules; and impressions obtained using the 3MTM True Definition Scanner system. For model 2 three groups were created (three groups, n = 10 each), including closed tray impressions with replacement abutments; open tray impression for dragging copings, without splinting; and impressions obtained using the 3MTM True Definition Scanner system. The master models and the models obtained using conventional methods were digitalized in order to compare them via an extraoral high-resolution scanner (Imetric IScan D104i, Porretruy, Switzerland). The STL (Stereo Lithography (format for transferring 3 dimensional shape information)) digital values were loaded into reverse-engineering software and superimposed with their respective STL master models in order to evaluate deviations in three dimensions. We then analyzed the squares of the deviations in the three axes and evaluated the median and the sum of the deviation square. Statistical analysis was performed using the IBM Corp. Released 2016. IBM SPSS Statistics for Windows, Version 24.0. Armonk, NY: IBM Corp. The normality of the distributions was analyzed according to a Kolmogorov-Smirnov test. The median comparison was performed using the differences between the medians, analyzed using non-parametric Kruskal-Wallis and Mann-Whitney tests with a significance level of p < 0.05. RESULTS: For model 1, the deviations of the digital impressions were smaller than those associated with the conventional techniques. The sum value in group D was 1,068,292, which was significantly lower than those of groups A, B, and C, which were shown to be 2,114,342, 2,165,491, and 1,265,918, respectively. This improvement was not observed when using model 2, however, where the conventional techniques yielded similar results. Group F simultaneously presented the lowest total square sum of the three deviations (1,257,835), indicating a significantly higher accuracy for this group in model 2, while the sum values were 1,660,975 and 1,489,328 for groups E and G, respectively. CONCLUSION: Digital impressions of full-arch models were able to achieve the accuracy of conventional impressions in an in vitro model. Nevertheless, further in vivo studies are needed to validate these in vitro results.

Acolhimento acadêmico e reconfiguração dos modelos educacionais durante a pandemia de COVID-19: relato de experiência / Recepción académica y reconfiguración de modelos educativos durante la pandemia COVID-19: relato de experiencia / Academic reception and reconfiguration of educational models during the COVID-19 Pandemic: experience rep

O presente artigoobjetiva relatar a experiência da aplicação de ferramentas digitais em encontros virtuais para o acolhimento de alunos ingressantes do curso de Odontologia da Universidade Estadual do Piauí (UESPI)durante a fase de isolamento social advinda da pandemia do novo coronavírus no ano de 2020. A ação extensionista foi realizada em cinco encontros virtuais por meio da plataforma de reuniões Google Meete foram aplicadas ferramentas colaborativas como Padlet, Mentimetere Google Formspara integração do grupo. A participação dos ingressantes foi integral, 100% dos estudantes matriculados no primeiro período do curso se fizeram presentes nos encontros. Diante das incertezas relativas ao início do período letivo no ano de 2020, a proposta realizada obteve êxito no objetivo principal de acolher os ingressantes e estabelecer o vínculo com a família do curso de Odontologia da UESPI. Desta forma a experiência mostrou-se positiva, proporcionando uma acolhida dos discentes durante o período mais crítico da pandemia de COVID-19 e forte isolamento social (AU).

Este artículo tiene como objetivo relatar la experiencia de aplicación de herramientas digitales en reuniones virtuales de bienvenida a estudiantes que ingresan a la carrera de Odontología de la Universidad Estadual de Piauí (UESPI) durante la fase de aislamiento social derivada de la pandemia del nuevo coronavirus en 2020. La acción de extensión se llevó a cabo en cinco reuniones virtuales utilizando la plataforma de reuniones Google Meet y se aplicaron herramientas colaborativas como Padlet, Mentimeter y Google Forms para la integración del grupo. La participación de los estudiantes de primer año fue plena, en las reuniones estuvo presente el 100% de los estudiantes matriculados en el primer periodo del curso. Ante las incertidumbres respecto al inicio del periodo académico del año 2020, la propuesta realizada tuvo éxito en su objetivo principal de dar la bienvenida a nuevos estudiantes y establecer un vínculo con la familia de carreras de Odontología de la UESPI. De esta manera, la experiencia resultó positiva, brindando a los estudiantes una acogida durante el período más crítico de la pandemia de COVID-19 y de fuerte aislamiento social (AU).

The present article aims to report the experience of applying digital tools in virtual meetings to welcome students entering the Dentistry course at the State University of Piauí (UESPI) during the social isolation phase resulting from the new coronavirus pandemic in 2020. The extension action was carried out in five virtual meetings using the Google Meet meeting platform and collaborative tools such as Padlet, Mentimeter and Google Forms were applied to integrate the group. The participation of freshmen was full, 100% of students enrolled in the first period of the course were present at the meetings. Given the uncertainties regarding the start of the academic period in 2020, the proposal made was successful in its main objective of welcoming new students and establishing a bond with the UESPI Dentistry course family. In this way, the experience proved to be positive, providing students with a welcome during the most critical period of the COVID-19 pandemic and strong social isolation (AU).

Study of anatomical variations in premolars by cone beam computerized tomography in a radiologic clinic in Piauí / Estudo de variações anatômicas em pré-molares por tomografia computadoriza de cone beam em uma clínica radiológica no Piauí

Introduction: Root canal cleaning is the main objective of endodontic treatment and requires knowledge of the internal anatomy. The premolars are evidenced in the literature with great anatomical variations. In view of this, studies indicate that the use of Cone Beam Computed Tomography helps in the visualization of highly complex anatomy. Objective: to describe the anatomical variations in maxillary and mandibular premolars using cone beam computed tomography in a radiologic clinic in Piaui. Methods: 54 cone beam computed tomography scans with 160 premolars were used, produced using the Orthopantomograph OP300 equipment and analyzed by multiplanar reconstructions: axial, coronal and sagittal. Data regarding sex, number of roots and canals were recorded to compare and classify according to Vertucci. Results: the maxillary first pre-molars had 63.5% two roots,83.7% with one root and the mandibular pre-molars mostly with one root. Regarding the number of channels, 92.3% of the first premolars had two channels, most of them maxillary second premolars and mandibular premolars only one channel. Vertucci variations of types I, II, III and IV were verified in single-rooted elements, observing a great variation in superior elements. As for the prevalence of sex, only the first superiors showed greater variation in males. Conclusions: the upper first premolars prevailed with a great anatomical variation in relation to the other premolars with prevalence of Vertucci Type I and in males.

Introdução: a limpeza do canal radicular é o principal objetivo do tratamento endodôntico e requer conhecimento da anatomia interna. Os pré-molares são evidenciados na literatura com grandes variações anatômicas. Diante disso, estudos indicam que o uso da Tomografia Computadorizada Cone Beam auxilia na visualização de anatomias de alta complexidade. Metodologia: foram utilizadas 54 tomografias computadorizadas de feixe cônico com 160 pré-molares, produzidas no equipamento Orthopantomograph OP300 e analisadas por reconstruções multiplanares: axial, coronal e sagital. Os dados referentes ao sexo, número de raízes e canais foram registrados para comparação e classificação segundo Vertucci. Resultados: os primeiros pré-molares superiores apresentavam 63,5% de duas raízes, 83,7% dos segundos pré-molares superiores tinham uma raiz e a maioria dos pré-molares inferiores tinha uma raiz. Em relação ao número de canais, 92,3% dos primeiros pré-molares possuíam dois canais, sendo a maioria segundos pré-molares superiores e pré-molares inferiores apenas um canal. Vertucci variações dos tipos I, II, III e IV foram verificadas nos elementos uniradiculares, observando-se a grande variação nos elementos superiores. Quanto à prevalência do sexo, apenas os primeiros superiores apresentaram maior variação no sexo masculino. Conclusão: os primeiros pré-molares superiores prevaleceram com grande variação anatômica em relação aos demais pré-molares com prevalência de Vertucci Tipo I e no sexo masculino.

Frequency of the mesiopalatal canal in upper first permanent molars viewed through computed tomography.

The success of any endodontic therapy depends on factors such as correct diagnosis and prognosis. Unawareness or failure to locate additional canals, such as the mesiopalatal canal in the upper first molar, may lead to unsuccessful treatment. Hence, it is valid to consider all the resources available for locating this anatomic structure, e.g. the Cone-Beam Computed Tomography (CBCT). The purpose of this study was to verify the frequency of mesiopalatal canals in upper first permanent molars through computed tomography. Tomography images from a digital archive of a diagnostic imaging center were analyzed. Eighty (80) upper right first molars were assessed through CBCT in axial cross sections at 6mm and 3mm from the root apex; 40 were females and 40, males, randomly chosen. The results revealed that the mesiopalatal canals were present in 56.25% of the sections at 6mm from the root apex, and in 23.75% at 3mm from the apical limit. CBCT scan has proved to be a valid resource for locating mesiopalatal canal, especially in cases where location was not feasible through clinical means.

O sucesso do tratamento endodôntico depende de fatores como o correto diagnóstico e prognóstico. O desconhecimento ou a não localização de canais adicionais, como o canal mesiopalatino no primeiro molar superior, pode levar ao insucesso do tratamento. Portanto, é válido considerar todos os recursos para localização desta estrutura anatômica, dentre eles a tomografia computadorizada cone beam (TCCB). O presente trabalho teve como objetivo verificar a frequência do canal mesiopalatino em primeiros molares permanentes superiores através da tomografia computadorizada. Os exames analisados fazem parte do arquivo digital de uma clínica de diagnóstico por imagem particular. Foram avaliados 80 primeiros molares superiores direitos em cortes axiais a 6 e 3 milímetros do ápice radicular observados nas TCCB, sendo 40 em pacientes do gênero feminino e 40 do gênero masculino escolhidos aleatoriamente. Os resultados revelaram que o canal mesiopalatino está presente em 56,25% dos cortes a 6mm do ápice radicular e em 23,75% a 3mm do limite apical. TCCB eu um recurso válido para localização do canal mesiopalatino, sobretudo nos casos em que não foi possível a sua localização clínica.

Trabalho de conclusão de curso de Odontologia: uma análise de perfil / Dentistry course monograph: a profile analysis

Este estudoavaliouo perfil de pesquisa acadêmica do Curso de Odontologia do Centro Universitário Uninovafapi por meio da análise de todososTrabalhos de Conclusão de Curso (TCC)apresentados no período de 2014/1 a 2019/1. Trata-se de pesquisa documental de caráter exploratório realizada no repositório de TCC da instituição. Dos 267 TCC defendidos no período pesquisado, 262atenderam aos critérios de inclusão. Os resultados apontaram que anota média foi 9,3±0,9 pontos. Observou-se que a área mais escolhida pelos alunos foia Ortodontia (17,2%). Apenas 19(7,3%)foram publicados em periódicos científicos. Conclui-se que a Ortodontia é a especialidade que desperta maior interesse nos acadêmicos de Odontologia para escrita do seu trabalho de conclusão. Além disso, verificou-se a necessidadede reflexão do corpo docente e discente para a concretização de publicações cientificas ainda na graduação (AU).

This study analyzed the academic research profile of the Dentistry Course at UninovafapiUniversity Centre through the analysis of all monographs presented in the period from 2014.1 to 2019.1. This is an exploratory research carried out in institution's monograph repository. The collected data were tabulated and analyzed with Microsoft Excel®software. Of the 267 monographs, 262 were included. The results showed that mean grade was 9.3 ± 0.9 points. It was observed that the area most chosen by students is Orthodontics (17.2%). Only 19 were published in scientific journals. We conclude that Orthodontics is the specialty with the greatest interest. In addition, it is important for teaching staff and students to think about achieving scientific publications during the undergraduate course (AU).

Prevalência da automedicação em acadêmicos de odontologia e enfermagem em uma instituição pública brasileira / Prevalence of self-medication in dentistry and nursing academics in a Brazilian public institution

Objetivo: Determinar a prevalência da automedicação em estudantes de Odontologia e Enfermagem da Universidade Estadual do Piauí no município de Parnaíba e avaliar se existe associação dessa tal prática com o nível socioeconômico, o sexo dos acadêmicos, bem como com o nível de conhecimento teórico-prático. Métodos: Consiste em uma metodologia quantitativa de natureza aplicada e de corte transversal. O levantamento contou com a participação de maiores de 18 anos de idade e fez o uso de um questionário autoaplicável com questões a respeito da automedicação e demais variáveis independentes. Os resultados obtidos foram tabulados e submetidos a testes estatísticos por meio de análise descritiva e bivariada. Foram utilizados os testes de Mann-Whitney, ANOVA Kruskal-Wallis, com o software Statistical Package for the Social Sciences (SPSS) versão 21,0. Resultados: A amostra contou com a participação de 70 acadêmicos, dos quais 41 (58,6%) são do curso de Odontologia e 29 (41,4%) do curso de Enfermagem, e a automedicação era praticada por 97,1% dos acadêmicos, predominantemente entre aqueles que estavam no início do curso (92,3%) (p < 0,05) e eram do sexo feminino (98,1%) (p < 0,05), não havendo variação estatisticamente significativa quanto a renda familiar ou curso em que estavam matriculados (p > 0,05). Além disso, a principal classe farmacológica utilizada foi a de analgésicos. Conclusão: A prevalência de automedicação foi alta e frequentemente relatada para o combate da cefaleia, os acadêmicos relataram que conhecimentos e experiências prévias os auxiliaram na escolha dos fármacos autoadministrados, não havendo associação dessa pratica de automedicação com o curso e a renda mensal. Além disso, essa prática foi estatisticamente mais prevalente no sexo feminino e dentre aqueles estudantes que estavam no início do curso da graduação.

Aim: To determine the prevalence of self-medication in Dentistry and Nursing students at the State University of Piauí in the city of Parnaíba and to evaluate whether there is an association between this practice and the socioeconomic level and the sex of the students, as well as the level of theoretical and practical knowledge. Methods: This study consists of a quantitative methodology of an applied and cross-sectional nature. The survey counted on the participation of individuals over 18 years of age and used a self-administered questionnaire with questions regarding self-medication and other independent variables. The obtained results were tabulated and subjected to statistical tests through descriptive and bivariate analysis. Mann-Whitney and ANOVA Kruskal-Wallis tests were used, together with the Statistical Package for the Social Sciences (SPSS), version 21.0. Results: This study's sample counted on the participation of 70 students, 41 (58.6%) were from the Dental School and 29 (41.4%) of the Nursing Course, and self-medication was practiced by 97.1% of the students, predominantly among those who were at the beginning of the course (92.3%) (p < 0.05) and were female (98.1%) (p < 0.05), with no statistically significant variation as to family income or course in which the students are engaged (p > 0.05). In addition, the main pharmacological class used was analgesics. Conclusion: The prevalence of self-medication was high and frequently reported to combat headaches. Academics reported that previous knowledge and experience helped them to choose self-administered drugs, with no association between this self-medication practice and the course of study and monthly income. In addition, this practice was statistically more prevalent in females among those students who were in the beginning of the undergraduate course.

Acidentes perfurocortantes entre acadêmicos de Odontologia / Accidents with cutting and piercing materials among Dentistry students

Os profissionais da saúde estão expostos aos mais diversos riscos ocupacionais durante a sua jornada de trabalhoeos cirurgiões-dentistas lideram o número de acidentes com materiais biológicos. Os atendimentos por acadêmicos de odontologia os deixam expostos aos riscos ocupacionais de forma semelhante aos profissionais da área. Este estudo teve o objetivo de avaliar prevalência e características dos acidentes com instrumentais perfurocortantesentre osacadêmicos de umcurso de Odontologia. Constatou-se prevalência de 28,85%de acidentes, com o maior percentual no 5° períodode curso,principalmente nasclínicas de Cirurgia e Endodontia. Apenas 20% dos afetados relataram a ocorrênciae a sonda exploradora foi o instrumental mais envolvido.Além disso,osacidentes ocorreram de forma igual no atendimento ao pacienteelavagem do instrumental. Portanto, faz-senecessário investimento em ações educativas e normativas permanentes para conscientização de acadêmicos sobre acidentes perfurocortantes (AU).

Health professionals are exposed to the most diverse occupational risks during their workday and dentists lead the number of accidents with biological materials. The assistance provided by dental students leaves them exposed to occupational risks in a similar way to professionals in the field. This study aimed to evaluate the prevalence and characteristics of accidents with cutting and piercing instruments among students of a Dentistry course. There was a prevalence of 28.85% of accidents, with the highest percentage in the 5th period of the course, mainly in the Surgery and Endodontics clinics. Only 20% of those affected reported the occurrence and the sickle probe was the instrument most involved. In addition, accidents occurred equally in patient care and washing of instruments. Therefore, it is necessary to invest in permanent educational and normative actions to raise the awareness of students about needlestick injuries (AU).

Propriedades físico-químicas de cimentos endodônticos à base de óxido de zinco e eugenol / Physicochemical properties of zinc oxide and eugenol endodontic cements

Objetivo: Analisar as propriedades físico-químicas, escoamento, tempo de presa, solubilidade e alteração dimensional, dos cimentos endodônticos à base de óxido de zinco e eugenol: Endomethasone N, Endofill e Grosmann, de acordo com a especificação número 57 da American Dental Association. Métodos: Realizou-se os testes nas condições ambientais de 23° ± 2°C e 50 ± 5% de umidade relativa do ar, mantidas 48 h antes dos procedimentos, repetindo-se cinco vezes e obtendo-se uma média aritmética. Resultados: Os cimentos à base de óxido de zinco e eugenol analisados apresentaram tempo de endurecimento elevados, para o teste de escoamento, o Endofill e Grossman apresentaram-se acima do estabelecido. Em relação à solubilidade, o Endomethasone N esteve dentro do padrão e os demais cimentos excederam. Conclusão:Todos os cimentos analisados obtiveram valores diferentes do recomendado para alteração dimensional. Nenhum dos cimentos enquadrou-se completamente nas normatizações.

Aim: To analyze the physical-chemical properties, flow, setting time, solubility and dimensional change of endodontic cements, based on zinc oxide and eugenol: Endomethasone N, Endo fill, and Grosmann, according to specification number 57 of the American Dental Association. Methods: The tests were conducted under environmental conditions of 23° ± 2°C and 50 ± 5% relative air humidity, maintained for 48 h prior to the procedures, repeating five times and obtaining an arithmetic mean. Results: The cements based on zinc oxide and eugenol analyzed in this study showed high hardening times. For the flow test, Endo fill and Grossman were above the established parameters. Regarding solubility, Endomethasone N was within the standard, while the other cements exceeded this standard. Conclusion: All analyzed cements obtained values that proved to be different from those recommended for dimensional changes. None of the cements were completely compliant with the regulations.

Decontamination of Gutta-percha Cones employed in Endodontics / Descontaminação de cones de guta-percha empregados em endodontia

ABSTRACT The guttapercha cones used in endodontic treatment are produced in aseptic conditions and their composition includes zinc oxide, which is responsible for antibacterial activity. However, there is the possibility of microbial contamination by manipulation, aerosol or during storage. Although several chemical agents have been tested for their decontamination, there is no consensus on the best disinfection protocol to be used. The aim of this study was to evaluate the decontamination of guttapercha cones contaminated with the bacteria Enterococcus faecalis, by using chlorhexidine digluconate (CHX) and sodium hypochlorite (NaClO) at different concentrations for short exposure times. For this purpose, guttapercha cones (size 40) were selected at random from a sealed box and immersed for 1 min in a microbial suspension. Then they were immersed in specific Petri dishes for different groups containing: CHX 2%, NaClO 1% or NaClO 2.5% for 30 s or 1 min, and subsequently placed in tubes containing BHI broth. After incubating the tubes for 48 h, it was observed that 1% and 2.5% NaClO and 2% CHX were effective for decontaminating the cones at those exposure time intervals. Microbial growth was detected in one of the replicates of the group with CHX applied for 30 s. To prevent the possibility of failures at this stage, the exposure time of guttapercha cones to the decontaminating agent should not be reduced.

RESUMO Os cones de gutapercha utilizados no tratamento endodôntico são produzidos em condições assépticas e possuem óxido de zinco em sua composição, responsável pela atividade antibac te riana. No entanto, existe a possibilidade de contaminação microbiana por manipulação, aerossol ou seu armazenamento. Embora vários agentes químicos já tenham sido testados para sua descontaminação, não há consenso sobre o melhor proto colo de desinfecção a ser usado. Nosso objetivo foi avaliar a descontaminação de cones de gutapercha contaminados com a bactéria Enterococcus faecalis, utilizando digluconato de clorexidina (CHX) e hipoclorito de sódio (NaClO) em diferentes concentrações e tempos de exposição curtos. Para esse fim, 40 cones de gutapercha foram selecionados aleatoriamente, de uma caixa selada e imersos por 1 min em uma suspensão microbiana. Em seguida, foram imersos em placas de Petri específicas para diferentes grupos contendo: CHX 2%, NaClO 1% ou 2,5%, nos tempos de exposição de 30s e 1min e subseqüentemente imersos em tubos contendo caldo BHI. Após incubação dos tubos por 48 h, observouse que NaClO 1% e 2,5% e CHX 2% foram eficazes para a descontaminação dos cones nesses intervalos de tempo de exposição. Em uma das réplicas do grupo com CHX aplicado por 30s foi detectado crescimento microbiano. O tempo de exposição dos cones de gutapercha ao agente de desconta minação não deve ser reduzido para evitar a possibilidade de falhas nesse estágio.

Análise do teor de cloro ativo e ph de soluções de hipoclorito de sódio / Analysis of the active chlorine content and ph of sodium hypochlorite solutions

O objetivo do presente estudo é verificar o teor de cloro ativo e pH das soluções de hipoclorito de sódio nas concentrações de 0,5%, 1% e 2,5% adquiridas em lojas de material odontológico de Teresina - PI. Analisou-se 11 amostras medindo o teor de cloro ativo através do método da titulometria e pH utilizando pHmetro eletrônico. Observou-se que as substâncias analisadas se encontravam com o teor de cloro acima do especificado nos rótulos e pH alcalino, sendo apenas uma das amostras com o teor abaixo do especificado e pH menor que 9. De acordo com os resultados, conclui-se que as amostras avaliadas com soluções de hipoclorito de sódio dotam de concentrações de cloro diferentes daquelas especificadas nos rótulos.

One of the most important stages of endodontic treatment is the chemical-mechanical preparation that aims to generate cleaning, with the use of chemical irrigation solutions and instruments that help to sanitize the canal. The objective of the present study is to verify the active chlorine content and pH of the sodium hypochlorite solutions at the concentrations of 0.5%, 1% and 2.5% obtained at dental material stores in Teresina - PI. The 11 samples were analyzed by measuring the active chlorine content using the titration method and pH using electronic pH meter. It was observed that the substances analyzed were chlorine content higher than specified on the labels and alkaline pH, being only one of the samples with chlorine content below the specified and pH less than 9. According to the results, it was concluded that samples tested with sodium hypochlorite solutions were contained chlorine concentrations different from those specified on the labels.