Effectiveness of cloth media filters on mitigating membrane fouling in anaerobic filter membrane bioreactors.

Membrane fouling is a persistent challenge that has impeded the broader application of anaerobic membrane bioreactors (AnMBRs). To mitigate membrane fouling, between the outlet of the UASB anaerobic bioreactor and the PVDF membrane to form the anaerobic filter membrane bioreactor (AnFMBR) system. Through comprehensive experiments, the optimal pore size for cloth filters was determined to be 50 µm. A comprehensive assessment over 140 days of operation shows that the novel AnFMBR had significantly greater resistance to membrane pollution than the traditional AnMBR. The AnFMBR system membrane tank exhibited lower mixed liquor suspended solid and mixed liquor volatile suspended solid concentrations, smaller sludge particle sizes, increased hydrophilicity of sludge flocs, and optimized microbial community distribution compared to those of conventional AnMBRs. The total solids foulant accumulation rate in the AnMBR was 5.1 g/m2/day, while in the AnFMBR, the rate was 2.4 g/m2/day, marking a 53.7 % decrease in fouling rate for the AnFMBR compared with the AnMBR. This decrease indicates that integrating the filtration assembly significantly lowered the rate of solid foulant accumulation on the membrane surface, primarily by controlling the buildup of solid foulants in the cake layer, thereby alleviating membrane fouling. AnFMBR compared to AnMBR, the membrane fouling rate halved, effectively doubled the interval between membrane cleaning from seven days, as observed in the AnMBR system, to fourteen days. These findings underscore the potential of integrating cloth media filters into AnMBRs to improve operational efficiency, economic viability, and sustainability.

Polydopamine-assisted PDGF-BB immobilization on PLGA fibrous substrate enhances wound healing via regulating anti-inflammatory and cytokine secretion.

Platelet-derived growth factor-bb (PDGF-BB) is a potent chemokine and mitogen for fibroblasts, keratinocytes, and vascular endothelium in the injured area, believed to be effective in wound healing. However, the short half-life of PDGF-BB and its rapid release from the wound surface limited its efficacy in vivo and vitro. To evaluate the wound healing effects of dorsal skin in SD rats with polydopamine-assisted immobilized PDGF-BB on PLGA nanofibrous substrate. First, the effects of pDA-coating and PDGF-BB immobilization on the morphology, compositions, and hydrophilicity of substrates were evaluated in details. Second, the wound healing effect of pDA/PLGA/PDGF-BB substrate was assessed in the dorsal skin of SD rats. Last, the cytokine analysis by ELISA method was employed to evaluate the advantages of pDA/PLGA/PDGF-BB substrate on anti-inflammatory, angiogenesis, and cellular proliferation. This method significantly improved the immobilization amount and stability of PDGF-BB on the substrate (p<0.01), further improved the hydrophilicity of substrates (p<0.05). Furthermore, the wound closure process was much more accelerated in the pDA/PLGA/PDGF-BB group (p<0.05). H&E and CD31 staining informed that the wound treated by pDA/PLGA/PDGF-BB substrate showed a high degree of regeneration and angiogenesis. The cytokine analysis showed that pDA significantly reduced the high level of inflammatory cytokines such as TNF-α (p<0.05). And the immobilized PDGF-BB significantly elevated the level of TGF-ß and VEGF (p<0.05). The pDA/PLGA/PDGF-BB substrate showed great therapeutic effect on wound healing compared with other control groups via regulating anti-inflammatory, angiogenesis, and cellular proliferation. Absolutely, this report offered an available novel method for skin regeneration.

miR-1303 regulates BBB permeability and promotes CNS lesions following CA16 infections by directly targeting MMP9.

Coxsackievirus A16 (CA16) is a member of the Picornaviridae family and causes mild and self-limiting hand, foot, and mouth disease (HFMD) in infants and young children. CA16 infection can also progress to central nervous system (CNS) complications; however, the underlying mechanism by which CA16 penetrates the blood-brain barrier (BBB) and then causes CNS damage remains unclear. This study aimed to explore the mechanism of CA16 neurotropic tropism by establishing an in vitro BBB model with CA16 infection and an in vivo CA16 rhesus monkey infant infection model. The results showed that CA16 infection induced increased permeability of the BBB accompanied by upregulation of matrix metalloproteinase 9 (MMP9) expression. Subsequently, high-throughput miRNA sequencing technology and bioinformatics analysis revealed that miR-1303 may regulate BBB permeability by targeting MMP9. Next, we used dual-luciferase, qRT-PCR, and western blot assays to provide evidence of MMP9 targeting by miR-1303. Further experiments revealed that CA16 infection promoted the degradation of junctional complexes (Claudin4, Claudin5, VE-Cadherin, and ZO-1), likely by downregulating miR-1303 and upregulating MMP9. Finally, EGFP-CA16 infection could enter the CNS by facilitating the degradation of junctional complexes, eventually causing neuroinflammation and injury to the CNS, which was confirmed using the in vivo rhesus monkey model. Our results indicate that CA16 might penetrate the BBB and then enter the CNS by downregulating miR-1303, which disrupts junctional complexes by directly regulating MMP9 and ultimately causing pathological CNS changes. These results provide new therapeutic targets in HFMD patients following CA16 infection.

Oxygen transfer dynamics and activated sludge floc structure under different sludge retention times at low dissolved oxygen concentrations.

In activated sludge systems, the aeration process consumes the most energy. The energy cost can be dramatically reduced by decreasing the operating dissolved oxygen (DO) concentration. However, low DO may lead to incomplete nitrification and poor settling performance of activated sludge flocs (ASFs). This study investigates oxygen transfer dynamics and settling performances of activated sludge under different sludge retention times (SRTs) and DO conditions using microelectrodes and microscopic techniques. Our experimental results showed that with longer SRTs, treatment capacity and settling performances of activated sludge improved due to smaller floc size and less extracellular polymeric substances (EPS). Long-term low DO conditions produced larger flocs and more EPS per unit sludge, which produced a more extensive anoxic area and led to low oxygen diffusion performance in flocs. Long SRTs mitigated the adverse effects of low DO. According to the microelectrode analysis and fractal dimension determination, smaller floc size and less EPS in the long SRT system led to high oxygen diffusion property and more compact floc structure that caused a drop in the sludge volume index (SVI). In summary, our results suggested that long SRTs of activated sludge can improve the operating performance under low DO conditions.

Different microRNA profiles reveal the diverse outcomes induced by EV71 and CA16 infection in human umbilical vein endothelial cells using high-throughput sequencing.

Enterovirus 71 (EV71) and Coxsackievirus A16 (CA16) remain the predominant pathogens in hand, foot, and mouth disease (HFMD), but the factors underlying the pathogenesis of EV71 and CA16 infections have not been elucidated. Recently, the functions of microRNAs (miRNAs) in pathogen-host interactions have been highlighted. In the present study, we performed comprehensive miRNA profiling in EV71- and CA16-infected human umbilical vein endothelial cells (HUVECs) at multiple time points using high-throughput sequencing. The results showed that 135 known miRNAs exhibited remarkable differences in expression. Of these, 30 differentially expressed miRNAs presented opposite trends in EV71- and CA16-infected samples. Subsequently, we mainly focused on the 30 key differentially expressed miRNAs through further screening to predict targets. Gene ontology (GO) and pathway analysis of the predicted targets showed the enrichment of 14 biological processes, 9 molecular functions, 8 cellular components, and 85 pathways. The regulatory networks of these miRNAs with predicted targets, GOs, pathways, and co-expression genes were determined, suggesting that miRNAs display intricate regulatory mechanisms during the infection phase. Consequently, we specifically analyzed the hierarchical GO categories of the predicted targets involved in biological adhesion. The results indicated that the distinct changes induced by EV71 and CA16 infection may be partly linked to the function of the blood-brain barrier. Taken together, this is the first report describing miRNA expression profiles in HUVECs with EV71 and CA16 infections using high-throughput sequencing. Our data provide useful insights that may help to elucidate the different host-pathogen interactions following EV71 and CA16 infection and offer novel therapeutic targets for these infections.

The Biomechanical Properties of Pedicle Screw Fixation Combined With Trajectory Bone Cement Augmentation in Osteoporotic Vertebrae.

STUDY DESIGN: The biomechanics of pedicle screw fixation combined with trajectory cement augmentation with various filling volumes were measured by pull-out, periodic antibending, and compression fatigue tests. OBJECTIVE: To investigate the biomechanical properties of the pedicle screw fixation combined with trajectory bone cement (polymethylmethacrylate) augmentation in osteoporotic vertebrae and to explore the optimum filling volume of the bone cement. SUMMARY OF BACKGROUND DATA: Pedicle screw fixation is considered to be the most effective posterior fixation method. The decrease of the bone mineral density apparently increases the fixation failure risk caused by screw loosening and displacement. Trajectory bone cement augmentation has been confirmed to be an effective method to increase the bone intensity and could markedly increase the stability of the fixation interface. METHODS: Sixteen elderly cadaveric 1-5 lumbar vertebral specimens were diagnosed with osteoporosis. The left and right vertebral pedicles were alternatively randomized for treatment in all groups, with the contralateral pedicles as control. The study groups included: group A (pedicle screw fixation with full trajectory bone cement augmentation), group B (75% filling), group C (50% filling), and group D (25% filling). Finally, the bone cement leakage and dispersion were assessed and the mechanical testing was conducted. RESULTS: The bone cement was well dispersed around the pedicle screw. The augmented bone intensity, pull-out strength, periodic loading times, and compression fatigue performance were markedly higher than those of the control groups. With the increase in trajectory bone cement, the leakage was also increased (P<0.05). The pull-out strength of the pedicle screw was increased with an increase in bone mineral density and trajectory bone cement. It peaked at 75% filling, with the largest power consumption. CONCLUSIONS: The optimal filling volume of the bone cement was 75% of the trajectory volume (about 1.03 mL). The use of excessive bone cement did not increase the fixation intensity but increased the risk of leakage.