Separation of Glycyrrhizic Acid and Its Derivants from Hydrolyzation in Subcritical Water by Macroporous Resin.

Glycyrrhizic acid (GL) and its derivants, glycyrrhetinic acid 3-O-mono-ß-d-glucuronide (GAMG) and glycyrrhetinic acid (GA) hydrolyzed in subcritical water, are bioactive substances and edulcorators. In this work, a separation strategy for these three substances was established. The effects of adsorbent and eluent were investigated by static/dynamic adsorption and multi-stage desorption with the mechanism analysis. The adsorption of them onto EXA50 resin was well fitted by the pseudo second-order kinetic model. The optimal dynamic adsorption flow rate was 6 bed volume (BV)/h, and water of pH = 12 was used to elute GL at 4 BV/h, then n-buthanol was used subsequently to elute GA at 1 BV/h, and finally 90% ethanol was applied to elute GAMG at 2 BV/h. As a result, purities of these compounds increased, which demonstrated that this adsorption-desorption technology was simple and efficient, and indicated the potential for large-scale purification and preparation of GL and its derivants in the future.

Study on Enhanced Dissolution of Azilsartan-Loaded Solid Dispersion, Prepared by Combining Wet Milling and Spray-Drying Technologies.

The purpose of this study was to develop a combination method of wet milling and spray-drying technologies to prepare the solid dispersion and improve the dissolution rate of poorly water-soluble drug candidates. Azilsartan (AZL) was selected as the model drug for its poor water solubility. In the study, AZL-loaded solid dispersion was prepared with polyethylene glycol 6000 (PEG6000) and hydroxypropyl cellulose with super low viscosity (HPC-SL) as stabilizers by using combination of wet grinding and spray-drying methods. The high AZL loading solid dispersion was then characterized by scanning electron microscopy (SEM), differential scanning calorimetry (DSC), powder X-ray diffraction (PXRD), and Fourier transform infrared spectroscopy (FTIR). Besides, dissolution test was carried out by the paddle method and stability investigation was also conducted. As a result, the dissolution rate of the solid dispersion tablets was found to be greater than conventional tablets, but in close agreement with market tablets. Furthermore, the formulation was shown to be stable at 40 ± 2°C and 75 ± 5% for at least 6 months, owing to its decreased particle size, morphology, and its crystal form. It was concluded that the combination of wet milling and spray-drying approaches to prepare solid dispersion would be a prospective method to improve the dissolution rate of poorly water-soluble drugs.

[Treatment of hyperlipoidemia by xiaozhi capsule: a clinical efficacy research].

OBJECTIVE: To observe the clinical effect and efficacy of Xiaozhi Capsule (XZC), a Chinese medicine preparation for tonifying Gan-Shen, invigorating Pi to dissipate dampness (TGSIPDD) on total cholesterol (TC), triglyceride (TG), high-density lipoprotein cholesterol (HDL-C), low-density lipoprotein cholesterol (LDL-C), and endothelin (ET) in treating patients with hyperlipidemia. METHODS: Totally 120 primary hyperlipidemia patients were randomly assigned to the treatment group (80 cases) and the control group (40 cases). Those in the treatment group took XZC, while those in the control group took Xuezhikang Capsule (XZKC). The serum TC, TG, HDL-C, LDL-C, and ET were detected and evaluated after 8 weeks of treatment. RESULTS: In the treatment group TC was reduced by 25.60%, TG by 33.70%, LDL-C by 32.90%, and ET by 11.02%, while HDL-C was elevated by 24.20%. In the control group, TC was reduced by 24.80%, TG by 33.50%, LDL-C by 31.30%, and ET by 12.05%, while HDL-C was elevated by 20.90%. There was statistical difference in the two groups when compared with before treatment (P < 0.01). But there was no statistical difference in the aforesaid indices between the two groups after treatment (P > 0.05). The integrals for main symptoms after treatment obviously decreased in the two groups, showing statistical difference when compared with before treatment in the same group (P < 0.01). But there was no statistical difference in the aforesaid indices between the two groups (P > 0.05). After 8 weeks of treatment, symptoms such as vertigo, heavy sensation of head, palpitation, chest distress, dry mouth and thirsty were obviously improved after treatment. There was statistical difference in the improvement of tinnitus after treatment in the treatment group (P < 0.01). The total effective rate was 86.25% in the treatment group and 82.50% in the control group, showing no statistical difference (P > 0.05). CONCLUSIONS: XZC showed certain effects on each blood lipid index and ET of hyperlipidemia patients. It had better improvement of clinical symptoms with reliable efficacy.

[Comparison of dentinal microcracks caused by new generation of single reciprocating files after root canal preparation].

PURPOSE: To compare the incidence of dentinal microcracks after root canal preparation by new generation of nickel-titanium instrument WaveOne Gold, Reciproc Blue with previous WaveOne and Reciproc. METHODS: Ninety extracted single-rooted mandibular premolars were randomly divided into 6 groups(n=15). The root canals were instrumented by using Hand K files, WaveOne, Reciproc, WaveOne Gold and Reciproc Blue. Fifteen teeth were left unprepared and served as negative controls. The root canals were all prepared to 25#. The roots were then sectioned at 3 mm, 6 mm and 9 mm from the apical orifice using a hard tissue slicer. The slices were observed under stereoscopic microscope at ×25 magnification. SPSS 17.0 software package was used for statistical analysis. RESULTS: No dentinal microcrack was found in the hand K files group and negative control group. The reciprocating single files WaveOne, WaveOne Gold, Reciproc and Reciproc Blue all produced dentinal microcracks after root canal preparation. The WaveOne generated the most dentinal microcracks than the hand K files(P＜0.05), and the microcracks were mainly concentrated in the middle part of the root. The number of dentinal microcracks caused by Reciproc and Reciproc Blue was the same, with no significant difference(P＞0.05). CONCLUSIONS: The new generation of reciprocating files of WaveOne Gold and Reciproc Blue may not increase the incidence of dentinal microcracks after root canal preparation.

Biodegradation of low-density polyethylene and polystyrene in superworms, larvae of Zophobas atratus (Coleoptera: Tenebrionidae): Broad and limited extent depolymerization.

Larvae of Zophobas atratus (synonym as Z. morio, or Z. rugipes Kirsch, Coleoptera: Tenebrionidae) are capable of eating foams of expanded polystyrene (EPS) and low-density polyethylene (LDPE), similar to larvae of Tenebrio molitor. We evaluated biodegradation of EPS and LDPE in the larvae from Guangzhou, China (strain G) and Marion, Illinois, U.S. (strain M) at 25 °C. Within 33 days, strain G larvae ingested respective LDPE and PS foams as their sole diet with respective consumption rates of 58.7 ± 1.8 mg and 61.5 ± 1.6 mg 100 larvae-1d-1. Meanwhile, strain M required co-diet (bran or cabbage) with respective consumption rates of 57.1 ± 2.5 mg and 30.3 ± 7.7 mg 100 larvae-1 d-1. Fourier transform infrared spectroscopy, proton nuclear magnetic resonance, and thermal gravimetric analyses indicated oxidation and biodegradation of LDPE and EPS in the two strains. Gel permeation chromatography analysis revealed that strain G performed broad depolymerization of EPS, i.e., both weight-average molecular weight (Mw) and number-average molecular weight (Mn) of residual polymers decreased, while strain M performed limited extent depolymerization, i.e., Mw and Mn increased. However, both strains performed limited extent depolymerization of LDPE. After feeding antibiotic gentamicin, gut microbes were suppressed, and Mw and Mn of residual LDPE and EPS in frass were basically unchanged, implying a dependence on gut microbes for depolymerization/biodegradation. Our discoveries indicate that gut microbe-dependent LDPE and EPS biodegradation is present within Z. atratus in Tenebrionidae, but that the limited extent depolymerization pattern resulted in undigested polymers with high molecular weights in egested frass.

Ubiquity of polystyrene digestion and biodegradation within yellow mealworms, larvae of Tenebrio molitor Linnaeus (Coleoptera: Tenebrionidae).

Academics researchers and "citizen scientists" from 22 countries confirmed that yellow mealworms, the larvae of Tenebrio molitor Linnaeus, can survive by eating polystyrene (PS) foam. More detailed assessments of this capability for mealworms were carried out by12 sources: five from the USA, six from China, and one from Northern Ireland. All of these mealworms digested PS foam. PS mass decreased and depolymerization was observed, with appearance of lower molecular weight residuals and functional groups indicative of oxidative transformations in extracts from the frass (insect excrement). An addition of gentamycin (30 mg g-1), a bactericidal antibiotic, inhibited depolymerization, implicating the gut microbiome in the biodegradation process. Microbial community analyses demonstrated significant taxonomic shifts for mealworms fed diets of PS plus bran and PS alone. The results indicate that mealworms from diverse locations eat and metabolize PS and support the hypothesis that this capacity is independent of the geographic origin of the mealworms, and is likely ubiquitous to members of this species.

Preparation, characterization, and properties of PMMA-doped polymer film materials: a study on the effect of terbium ions on luminescence and lifetime enhancement.

Poly(methylmethacrylate) (PMMA) doped with Tb-based imidazole derivative coordination polymer {[Tb(3)(L)(µ(3)-OH)(7)]·H(2)O}(n) (1) (L = N,N'-bis(acetoxy)biimidazole) was synthesized and its photophysical properties were studied. The L'(L' = N,N'-bis(ethylacetate)biimidazole) ligand was synthesized by an N-alkylation reaction process followed by ester hydrolysis to produce ligand L. Polymer 1 and ligand L' have been characterized by (1)H NMR and IR spectroscopy, elemental analysis, PXRD and X-ray single-crystal diffraction. Coordination polymer 1 is the first observation of a CdCl(2) structure constructed with hydroxy groups and decorated by ligand L in lanthanide N-heterocyclic coordination polymers. In the 2D layered structure of 1, each Tb3 metal center is connected with three Tb1 and three Tb2 metal centers by seven hydroxyl groups in different directions, resulting in a six-membered ring. After doping, not only the luminescence intensity and lifetime enhanced, but also their thermal stability was increased in comparison with 1. When 1 was doped into poly(methylmethacrylate) (1@PMMA), polymer film materials were formed with the PMMA polymer matrix (w/w = 2.5%-12.5%) acting as a co-sensitizer for Tb(3+) ions. The luminescence intensity of the Tb(3+) emission at 544 nm increases when the content of Tb(3+) was 10%. The lifetime of 1@PMMA (914.88 µs) is more than four times longer than that of 1 (196.24 µs). All τ values for the doped polymer systems are higher than coordination polymer 1, indicating that radiative processes are operative in all the doped polymer films. This is because PMMA coupling with the O-H oscillators from {[Tb(3)(L)(µ(3)-OH)(7)]·H(2)O}(n) can suppress multiphonon relaxation. According to the variable-temperature luminescence (VT-luminescence) investigation, 1@PMMA was confirmed to be a stable green luminescent polymer film material.