N-terminal acetyltransferase 6 facilitates enterovirus 71 replication by regulating PI4KB expression and replication organelle biogenesis.

Enterovirus 71 (EV71) is one of the major pathogens causing hand, foot, and mouth disease in children under 5 years old, which can result in severe neurological complications and even death. Due to limited treatments for EV71 infection, the identification of novel host factors and elucidation of mechanisms involved will help to counter this viral infection. N-terminal acetyltransferase 6 (NAT6) was identified as an essential host factor for EV71 infection with genome-wide CRISPR/Cas9 screening. NAT6 facilitates EV71 viral replication depending on its acetyltransferase activity but has little effect on viral release. In addition, NAT6 is also required for Echovirus 7 and coxsackievirus B5 infection, suggesting it might be a pan-enterovirus host factor. We further demonstrated that NAT6 is required for Golgi integrity and viral replication organelle (RO) biogenesis. NAT6 knockout significantly inhibited phosphatidylinositol 4-kinase IIIß (PI4KB) expression and PI4P production, both of which are key host factors for enterovirus infection and RO biogenesis. Further mechanism studies confirmed that NAT6 formed a complex with its substrate actin and one of the PI4KB recruiters-acyl-coenzyme A binding domain containing 3 (ACBD3). Through modulating actin dynamics, NAT6 maintained the integrity of the Golgi and the stability of ACBD3, thereby enhancing EV71 infection. Collectively, these results uncovered a novel mechanism of N-acetyltransferase supporting EV71 infection.IMPORTANCEEnterovirus 71 (EV71) is an important pathogen for children under the age of five, and currently, no effective treatment is available. Elucidating the mechanism of novel host factors supporting viral infection will reveal potential antiviral targets and aid antiviral development. Here, we demonstrated that a novel N-acetyltransferase, NAT6, is an essential host factor for EV71 replication. NAT6 could promote viral replication organelle (RO) formation to enhance viral replication. The formation of enterovirus ROs requires numerous host factors, including acyl-coenzyme A binding domain containing 3 (ACBD3) and phosphatidylinositol 4-kinase IIIß (PI4KB). NAT6 could stabilize the PI4KB recruiter, ACBD3, by inhibiting the autophagy degradation pathway. This study provides a fresh insight into the relationship between N-acetyltransferase and viral infection.

Chikusetsu Saponin IVa liposomes modified with a retro-enantio peptide penetrating the blood-brain barrier to suppress pyroptosis in acute ischemic stroke rats.

BACKGROUND: The therapeutic strategies for acute ischemic stroke were faced with substantial constraints, emphasizing the necessity to safeguard neuronal cells during cerebral ischemia to reduce neurological impairments and enhance recovery outcomes. Despite its potential as a neuroprotective agent in stroke treatment, Chikusetsu saponin IVa encounters numerous challenges in clinical application. RESULT: Brain-targeted liposomes modified with THRre peptides showed substantial uptake by bEnd. 3 and PC-12 cells and demonstrated the ability to cross an in vitro blood-brain barrier model, subsequently accumulating in PC-12 cells. In vivo, they could significantly accumulate in rat brain. Treatment with C-IVa-LPs-THRre notably reduced the expression of proteins in the P2RX7/NLRP3/Caspase-1 pathway and inflammatory factors. This was evidenced by decreased cerebral infarct size and improved neurological function in MCAO rats. CONCLUSION: The findings indicate that C-IVa-LPs-THRre could serve as a promising strategy for targeting cerebral ischemia. This approach enhances drug concentration in the brain, mitigates pyroptosis, and improves the neuroinflammatory response associated with stroke.

N-Acetyltransferase 8 Promotes Viral Replication by Increasing the Stability of Enterovirus 71 Nonstructural Proteins.

Enterovirus 71 (EV71) is deemed a reemergent pathogen, with recent outbreaks worldwide. EV71 infection causes hand, foot, and mouth disease (HFMD) and has been associated with severe cardiac and central nervous system complications and even death. Viruses need host factors to complete their life cycle; therefore, the identification of the host factors for EV71 infection is pivotal to new antiviral research. Emerging evidence has highlighted the importance of protein acetylation during infection by various human viruses. The endoplasmic reticulum (ER), as the prominent organelle of EV71 replication, also has a unique acetylation regulation mechanism. However, the pathogenesis of EV71 and its relationship with the ER-based acetylation machinery are not fully understood. In this study, we demonstrated for the first time that the ER-resident acetyltransferase N-acetyltransferase 8 (NAT8) is a host factor for EV71 infection. Inhibiting NAT8 with CRISPR or a small compound significantly suppressed EV71 infection in SK-N-SH cells. NAT8 promoted EV71 replication in an acetyltransferase-activity-dependent manner. Additionally, we found that NAT8 facilitates EV71 infection by interacting with EV71 2B, 3AB, and 3C proteins and increasing the stability of these proteins. These results uncovered a novel function of NAT8 and elucidated a new mechanism underlying the regulation of EV71 replication. IMPORTANCE EV71 is one of the most common pathogens causing HFMD in young children, and some patients experience severe or fatal neurological consequences. To ensure efficient replication, the virus must hijack multiple host factors for its own benefit. Here, we show that the ER-resident acetyltransferase NAT8 is a host factor for EV71 infection. EV71 fails to complete its infection in various cells in the absence of NAT8. We further show that NAT8 benefits EV71 replication in an acetyltransferase-activity-dependent manner. Finally, we show that NAT8 facilitates EV71 infection by interacting with EV71 2B, 3AB, and 3C proteins and increasing the stability of these proteins. These results uncovered a novel function of NAT8 in EV71 infection and elucidated a new mechanism underlying the regulation of EV71 replication.

Treating Autoimmune Diseases by Targeting IL-23 with Gene-Silencing Pyrrole-Imidazole Polyamide.

Autoimmune diseases are a physiological state that immune responses are directed against and damage the body's own tissues. Numerous studies have demonstrated promising therapeutic effects in certain autoimmune diseases by targeting IL-23/IL-17 axis, mostly through using Abs against IL-23 or IL-17A. Pyrrole-imidazole polyamides are nuclease-resistant compounds that inhibit gene expression through binding to the minor groove of DNA. To develop a novel gene-silencing agent that targets IL-23/IL-17 axis, we designed polyamide that specifically binds to the transcription factor c-Rel-binding site located in the promoter of IL-23p19 subunit. Our study showed that this polyamide is capable of entering into nucleus with high efficiency in dendritic cells and macrophage. In addition, it prevented the binding of c-Rel to the promoter of IL-23p19 in vivo and specifically inhibited the expression of IL-23. More importantly, we demonstrated that this polyamide is therapeutically effective using both the imiquimod-induced psoriasis and experimental autoimmune uveitis mouse models. Taken together, these results indicate that pyrrole-imidazole polyamide targeting IL-23p19 could be a novel and feasible therapeutic strategy for patients with autoimmune diseases.

Desulfurization and upgrade of pyrolytic oil and gas during waste tires pyrolysis: The role of metal oxides.

Pyrolysis can effectively convert waste tires into high-value products. However, the sulfur-containing compounds in pyrolysis oil and gas would significantly reduce the environmental and economic feasibility of this technology. Here, the desulfurization and upgrade of waste tire pyrolysis oil and gas were performed by adding different metal oxides (Fe2O3, CuO, and CaO). Results showed that Fe2O3 exhibited the highest removal efficiency of 87.7 % for the sulfur-containing gas at 600 °C with an outstanding removal efficiency of 99.5 % for H2S. CuO and CaO were slightly inferior to Fe2O3, with desulfurization efficiencies of 75.9 % and 45.2 % in the gas when added at 5 %. Fe2O3 also demonstrated a notable efficacy in eliminating benzothiophene, the most abundant sulfur compound in pyrolysis oil, with a removal efficiency of 78.1 %. Molecular dynamics simulations and experiments showed that the desulfurization mechanism of Fe2O3 involved the bonding of Fe-S, the breakage of C-S, dehydrogenation and oxygen migration process, which promoted the conversion of Fe2O3 to FeO, FeS and Fe2(SO4)3. Meanwhile, Fe2O3 enhanced the cyclization and dehydrogenation reaction, facilitating the upgrade of oil and gas (monocyclic aromatics to 57.4 % and H2 to 22.3 %). This study may be helpful for the clean and high-value conversion of waste tires.

Co-exposure of polystyrene microplastics influence cadmium trophic transfer along the "lettuce-snail" food chain: Focus on leaf age and the chemical fractionations of Cd in lettuce.

Cadmium (Cd) and polystyrene microplastics (PS) co-contamination always occurs in environment; however, the trophic transfer of Cd and PS is still poorly understood. A hydroponic experiment was conducted to investigate the behavior of Cd in lettuce, together with the root or foliar exposure of different sized PS. Accumulation and chemical form distributions of Cd in leaves were distinguished into young and mature leaves. Subsequently, a 14-day snail feeding experiment was performed. Data showed that Cd accumulation in roots, rather than in leaves, are significantly affected by PS coexistence. However, mature leaves had a higher Cd content than young leaves under the root exposure of PS, while a reverse effect was observed in the foliar exposure. There existed a positive correlation between the food-chain transfer associated Cd (CdFi+Fii+Fiii) in mature leaves and Cd content in snail soft tissue (r = 0.705, p < 0.001), but not in young leaves. Though no bio-amplification of Cd in food chain was observed, an increase of Cd transfer factor (TF) from lettuce to snail was noted in the root exposure of 5 µm PS and the foliar exposure of 0.2 µm PS. Moreover, we observed a highest increase rate of 36.8 % in TF values from lettuce to snail viscera, and a chronic inflammatory response in snail stomach tissue. Therefore, more attentions should be paid to study the ecological risks of heavy metals and microplastics co-contamination in environment.

Construction of coxsackievirus B5 viruses with luciferase reporters and their applications in vitro and in vivo.

Coxsackievirus belongs to the Picornaviridae family and is one of the major pathogens that cause hand, foot and mouth disease (HFMD) in infants and children with potential serious complications and even deaths. The pathogenesis of this virus is not fully elucidated and no vaccine or antiviral drug has been approved. In this study, a full-length infectious cDNA clone of coxsackievirus B5 virus was assembled and the recombinant virus displayed similar growth kinetics and ability to cause cytopathic effects as the parental virus. Luciferase reporter was then incorporated to generate both full-length and subgenomic replicon (SGR) reporter viruses. The full-length reporter virus is suitable for high-throughput antiviral screening, while the SGR is a useful tool to study viral-host interactions. More importantly, the full-length reporter virus has also been shown to infect the suckling mouse model and the reporter gene could be detected using an in vivo imaging system, thus providing a powerful tool to track viruses in vivo. In summary, we have generated coxsackievirus B5 reporter viruses and provided unique tools for studying virus-host interactions in vitro and in vivo as well as for high-throughput screenings (HTS) to identify novel antivirals.

Crystal structures of enterovirus 71 3C protease complexed with rupintrivir reveal the roles of catalytically important residues.

EV71 is the primary pathogenic cause of hand-foot-mouth disease (HFMD), but an effective antiviral drug currently is unavailable. Rupintrivir, an inhibitor against human rhinovirus (HRV), has potent antiviral activities against EV71. We determined the high-resolution crystal structures of the EV71 3C(pro)/rupintrivir complex, showing that although rupintrivir interacts with EV71 3C(pro) similarly to HRV 3C(pro), the C terminus of the inhibitor cannot accommodate the leaving-group pockets of EV71 3C(pro). Our structures reveal that EV71 3C(pro) possesses a surface-recessive S2' pocket that is not present in HRV 3C(pro) that contributes to the additional substrate binding affinity. Combined with mutagenic studies, we demonstrated that catalytic Glu71 is irreplaceable for maintaining the overall architecture of the active site and, most importantly, the productive conformation of catalytic His40. We discovered the role of a previously uncharacterized residue, Arg39 of EV71 3C(pro), that can neutralize the negative charge of Glu71, which may subsequently assist deprotonation of His40 during proteolysis.

Crystalline drug aconitine-loaded poly(d,l-lactide-coglycolide) nanoparticles: preparation and in vitro release.

This paper reports both the optimization of aconitine entrapment and its release from biodegradable poly(d,l-lactide-coglycolide) (PLGA) nanoparticles prepared using the O/W single-emulsion/solvent-evaporation technique. The influence of several parameters, such as the initial aconitine mass, aqueous-phase pH, volume ratio of aqueous/organic phase (W/O), PLGA concentration in the organic phase, etc., on aconitine encapsulation were investigated. The optimized nanoparticles had an entrapment efficiency of 88.40+/-3.02% with drug loading capacity of 9.42+/-2.93%. Crystallization growth, which played a crucial role in hindering the incorporation of aconitine into the polymer carrier, was proposed. Differential scanning calorimetry and X-ray powder diffraction demonstrated that aconitine existed in an amorphous state or as a solid solution in the polymeric matrix. The in vitro release profiles exhibited a sustained release of aconitine from nanoparticles and a pH-dependent character in phosphate-buffered saline with different pH values. Moreover, aconitine-loaded PLGA nanoparticles could lead to improvement in the stability of aconitine. This work demonstrated the feasibility of encapsulating aconitine into PLGA nanoparticles using the O/W single-emulsion/solvent-evaporation technique.

An aligned porous electrospun fibrous scaffold with embedded asiatic acid for accelerating diabetic wound healing.

The diabetic non-healing wound is one of the most common complications of diabetics. The long-term stimulus of oxidative stress, inflammation and infection caused by the hyperglycemic microenvironment in the wound site always leads to a delayed healing process of the diabetic wound. To address this issue, in this study, we prepared an asiatic acid (AA)-embedded aligned porous poly(l-lactic acid) (PLLA) electrospun fibrous scaffold (AA-PL) for accelerating diabetic wound healing. The results showed that the electrospun fibers with nanopores on the surfaces were aligned in a single direction, while the AA was well embedded in the fibers and can be continuously released from them. The in vitro results revealed that the AA-PL scaffolds can effectively alleviate the H2O2-induced oxidative stress damage to HaCat cells and downregulate the LPS-induced pro-inflammatory cytokine (IL-1ß, TNF-α, IL6) gene expression in RAW 264.7 macrophage cells. Moreover, the growth of E. coli and S. aureus could be inhibited by the AA-PL scaffolds. The in vivo study further demonstrated that the AA-PL scaffolds can accelerate the re-epithelization, angiogenesis and extracellular matrix formation of a wound by relieving the high oxidative stress, inflammation and infection in the diabetic wound site. This study suggests that the combination of hierarchical structures (nanopores on the aligned fibers) with the controllable release of AA from the scaffolds is an efficient and innovative strategy for the treatment of diabetic non-healing wounds.

In vitro evaluation of hydroxyapatite coatings with (002) crystallographic texture deposited by micro-plasma spraying.

Hydroxyapatite (HA) coatings are usually deposited on the metallic implant to increase the biocompatibility and protect the bloodstream from harmful metal ions. Atmospheric plasma spray (APS) is known as a cost effective deposition method. However, the low crystallinity of APS deposited coating accelerates its dissolution in body fluid. We used micro-plasma spray (MPS) to develop chemically stable HA coatings, and performed APS as reference. Results showed that MPS deposited coatings exhibited (002) crystallographic texture while the reference sample did not. The texture intensity and crystallinity were improved by shortening stand-off distance. These suggested that different formation procedures of HA coatings were involved and three mechanisms were proposed by sketching typical splats. To evaluate the chemical stability of the coatings in a physiological environment, in vitro experiments were performed in Hanks' solution. Well crystallized (~100%) HA coating with the strongest crystallographic texture exhibited superior stability up to 14days. Crystals with (002) orientation was more stable than that with (211) orientation. Hence columnar structure with nanopores emerged on the coating surface after incubation, and this may facilitate the future osteoblast growth. Furthermore, HA coating with weak and no crystallographic texture induced apatite layer. However, vertical cracks and cleavage at coating-apatite interface may cause coating separation.

Exendin-4 Loaded Nanoparticles with a Lipid Shell and Aqueous Core Containing Micelles for Enhanced Intestinal Absorption.

The purpose of this study was to formulate nanoparticles with an elaborate structure for oral delivery of exendin-4 using a simple preparation process. The nanoparticles possessed a mixed lipid shell and an aqueous core which contained drug-loaded micelles. Formulation was optimized by a central composite design and the structure of the nanoparticles was validated. The efficacy for delivery of exendin-4 was evaluated both in vitro and in vivo. The drug encapsulation efficiency of the nanoparticles reached 97.7%. The nanoparticles greatly enhanced the cellular uptake and transport of encapsulated exendin-4 in vitro. The in situ study showed that exendin-4 could be transported across the epithelium into intestinal capillaries, while the lipid materials largely remained in the epithelium. Pharmacodynamic studies in diabetic KKAy mice demonstrated that the exendin-4-loaded nanoparticles exhibited a marked hypoglycemia effect with a pharmacological availability of 12.7% after intestinal administration.

Preparation, macrophages targeting delivery and anti-inflammatory study of pentapeptide grafted nanostructured lipid carriers.

The targeting ability of pentapeptide (Thr-Lys-Pro-Pro-Arg) grafted nanostructured lipid carriers (Pen-NLCs) to macrophages was investigated in both in vitro and in vivo studies. The results showed the improvement of the anti-inflammatory effect by using this drug delivery system. Firstly, a pentapeptide-polyethylene glycol2000-stearate was synthesized and formulated into Pen-NLCs. Non-grafted nanostructured lipid carriers (Bare-NLCs) and Pen-NLCs were 190.0±1.0 and 203.0±8.5 nm in size, -8.1±2.1 and 2.3±1.2 mV in zeta potential respectively. Meanwhile, they had comparable entrapment efficiency and drug loading efficiency. In vitro and in vivo cellular uptake studies showed increased internalization of Pen-NLCs by macrophages when compared to pure drugs and Bare-NLCs. Animal studies in a carrageenan-treated air pouch model were used to further investigate the anti-inflammatory effects of Pen-NLCs. Through intravenous administration, a single dose of DXM loaded Pen-NLCs showed the strongest inhibition of inflammatory indexes of air pouch fluid weight, leukocyte infiltration, granulation tissue weight and nitric oxide concentration in comparison with free drugs and DXM loaded Bare-NLCs. In conclusion, this study demonstrated the potential of Pen-NLCs as promising drug carriers for anti-inflammatory treatments.

Treatment of prostate carcinoma with (galectin-3)-targeted HPMA copolymer-(G3-C12)-5-Fluorouracil conjugates.

Galectin-3 (Gal-3), over-expressed on a variety of human tumor cells, is a potential binding site for targeted metastatic prostate cancer therapy. The aim of this study was to develop a G3-C12-mediated drug delivery system based on N-(2-hydroxypropyl) methacrylamide (HPMA) copolymers targeting to Gal-3-expressed human PC-3 prostate carcinoma cells. 5-Fluorouracil (5-Fu), an anti-tumor agent, was selected as a model drug. G3-C12, a binding peptide, which specifically binds to the carbohydrate-recognition domain (CRD) of Gal-3, was attached to HPMA copolymers as a targeting moiety. Compared with non-targeted conjugates (P-Fu), Gal-3-targeted HPMA copolymer-(G3-C12)-5-Fu conjugates (P-(G3-C12)-Fu) displayed a superior intracellular internalization followed by enhanced cytotoxicity and apoptosis-induction. Subsequently, the in vitro migration study on PC-3 cells indicated that P-(G3-C12)-Fu was able to efficiently inhibit the cell migration ability after wounding. On PC-3 tumor-bearing mice model, G3-C12-modified copolymers showed a higher tumor accumulation coupled with a faster clearance from blood circulation than non-modified ones. Finally, Gal-3-targeted conjugates significantly improved the anti-tumor activity of 5-Fu in nude mice bearing PC-3 tumor xenografts. Consequently, G3-C12 would be a promising targeting moiety for cell-specific prostate cancer therapy in future.

Preparation and characterization of a novel pH-sensitive coated microsphere for duodenum-specific drug delivery.

The aim of this study is to develop a duodenum-specific drug delivery system on the basis of a pH-sensitive coating and a mucoadhesive inner core for eradication of Helicobacter pylori (H. pylori) in the ulcer duodenum. Hydroxypropyl methylcellulose acetate maleate (HPMCAM) was used as the pH-sensitive material, which dissolves around pH 3.0. The mucoadhesive microspheres loaded with furazolidone (FZD-ad-MS) were prepared by the emulsification-solvent evaporation method using Carbopol 971NP as the mucoadhesive polymer. The prepared pH-sensitive coated mucoadhesive microspheres (AM-coated-MS) were characterized in regards to particle size, drug loading efficiency, morphological change, drug stability, drug release and in vitro anti-H. pylori activity. The particle size was 160.97 ± 47.24 µm and 336.44 ± 129.34 µm, and the drug content was 42.33 ± 3.43% and 10.96 ± 1.29% for FZD-ad-MS and AM-coated-MS, respectively. The morphological changes in different pH media were characterized by scanning electron microscopy (SEM). HPMCAM coating improved the stability of the FZD-ad-MS and these particles were expected to remain intact until their arrival in the duodenum. The drug release was extremely suppressed at pH 1.2 for AM-coated-MS, but increased at pH 4.0 after regeneration of FZD-ad-MS. In addition, FZD-ad-MS exhibited excellent anti-H. pylori activity in vitro. Thus, the HPMCAM-coated microspheres developed in this study hold great promise for use as a duodenum-specific drug delivery system for H. pylori clearance.

Crystal structure of human enterovirus 71 3C protease.

Human enterovirus 71 (EV71) is the major pathogen that causes hand, foot and mouth disease that particularly affects young children. Growing hand, foot and mouth disease outbreaks were observed worldwide in recent years and caused devastating losses both economically and politically. However, vaccines or effective drugs are unavailable to date. The genome of EV71 consists of a positive sense, single-stranded RNA of ∼7400 bp, encoding a large precursor polyprotein that requires proteolytic processing to generate mature viral proteins. The proteolytic processing mainly depends on EV71 3C protease (3C(pro)) that possesses both proteolysis and RNA binding activities, which enable the protease to perform multiple tasks in viral replication and pathogen-host interactions. The central roles played by EV71 3C(pro) make it an appealing target for antiviral drug development. We determined the first crystal structure of EV71 3C(pro) and analyzed its enzymatic activity. The crystal structure shows that EV71 3C(pro) has a typical chymotrypsin-like fold that is common in picornaviral 3C(pro). Strikingly, we found an important surface loop, also denoted as ß-ribbon, which adopts a novel open conformation in EV71 3C(pro). We identified two important residues located at the base of the ß-ribbon, Gly123 and His133, which form hinges that govern the intrinsic flexibility of the ribbon. Structure-guided mutagenesis studies revealed that the hinge residues are important to EV71 3C(pro) proteolytic activities. In summary, our work provides the first structural insight into EV71 3C(pro), including a mobile ß-ribbon, which is relevant to the proteolytic mechanism. Our data also provides a framework for structure-guided inhibitor design against EV71 3C(pro).