RESUMO
Microenvironmental cues, such as surface topography and substrate stiffness, may affect stem cells adhesion, morphology, alignment, proliferation and differentiation. Adipose derived stem cells (ASCs) have attracted considerable interest in regenerative medicine due to their easy isolation, extensive in vitro expandability and ability to differentiate along a number of different tissue-specific lineages. The aim of this work was to investigate ASCs adhesion, alignment and differentiation into myogenic lineage on nanofibrous polymeric scaffolds with anisotropic topography. Nanostructured scaffolds with randomized or parallel fibers were fabricated by electrospinning using polycaprolactone (PCL) and the polycarbonate-urethane ChronoFlex AL 80A (CFAL). Cells expressed myosin (fast skeletal) and tropomyosin in all surface topographies 7 days after seeding but myotube formation was only observed on CFAL scaffolds and only few myotubes were formed on PCL scaffolds. The different cell behavior could be ascribed to two main parameters: fibers dimensions and fibers orientation of the substrates that could result in a better myotube formation on CFAL scaffolds.
Assuntos
Tecido Adiposo/metabolismo , Células-Tronco/citologia , Alicerces Teciduais/química , Tecido Adiposo/patologia , Materiais Biocompatíveis/química , Adesão Celular , Diferenciação Celular , Proliferação de Células , Humanos , Imuno-Histoquímica , Microscopia Eletrônica de Varredura , Desenvolvimento Muscular , Músculo Esquelético/metabolismo , Miosinas/metabolismo , Nanofibras/química , Nanoestruturas/química , Nanotecnologia , Poliésteres/química , Engenharia Tecidual/métodos , Tropomiosina/químicaRESUMO
Autologous and eterologous cell encapsulation has been extensively studied for clinical application in functional organs substitution, recombinant cell transplantation in gene therapy or in muscle and cartilage regeneration to treat degenerative pathologies. In this work, calcium alginate, calcium alginate/chitosan, calcium alginate/gelatin and pectin/chitosan microcapsules were prepared to be used as innovative injectable scaffolds for soft issue regeneration by a simple extrusion method from aqueous solutions. Prepared microcapsules had spherical morphology, whereas their size was deeply influenced by the polymeric composition. When incubated in a physiological-like environment up to 30 days, they underwent an initial swelling, followed by weight loss at different rates, depending on the microcapsules formulation. The encapsulation of mouse myoblast cells (C2C12 cell line) was obtained in calcium alginate, calcium alginate/chitosan, calcium alginate/gelatin microcapsules. Cells were alive throughout the encapsulation procedure, and were recovered by a mechanical rupture of the microcapsules. After 7 days, fractured microcapsules led cells to migrate gradually out.
Assuntos
Cápsulas/química , Regeneração Tecidual Guiada/métodos , Polissacarídeos/química , Alginatos/química , Alginatos/farmacologia , Animais , Materiais Biocompatíveis/síntese química , Materiais Biocompatíveis/química , Cápsulas/síntese química , Células Cultivadas , Relação Dose-Resposta a Droga , Composição de Medicamentos/métodos , Estabilidade de Medicamentos , Regeneração Tecidual Guiada/instrumentação , Camundongos , Modelos Biológicos , Músculos/fisiologia , Tamanho da Partícula , Pectinas/química , Pectinas/farmacologia , MolhabilidadeRESUMO
In bone tissue reconstruction, the use of engineered constructs created by mesenchymal stem cells (MSCs) that differentiate and proliferate into 3D porous scaffolds is an appealing alternative to clinical therapies. Human placenta represents a possible source of MSCs, as it is readily available without invasive procedures and because of the phenotypic plasticity of many of the cell types isolated from this tissue. The scaffold considered in this work is a slowly degradable polyurethane foam (EF PU foam), synthesized and characterized for morphology and in vitro interaction with chorion mesenchymal cells (CMCs). These cells were isolated from human term placenta and cultured onto the EF PU foam using two different culture media (EMEM and NH osteogenic differentiation medium). Synthesized EF PU foam showed homogeneous pore size and distribution, with 89% open porosity. In vitro tests showed CMCs scaffold colonization, as confirmed by Scanning Electron Microscopy (SEM) observations and hematoxylin-eosin staining. Alizarin Red staining revealed the presence of a small amount of calcium deposition for the samples treated with the osteogenic differentiation medium. Therefore, the proposed EF PU foam appears to stimulate cell adhesion in vitro, sustaining CMCs growth and differentiation into the osteogenic lineage.
Assuntos
Osteogênese , Placenta/metabolismo , Poliuretanos/química , Transplante Ósseo/métodos , Adesão Celular , Diferenciação Celular , Córion/química , Córion/patologia , Meios de Cultura/metabolismo , Feminino , Humanos , Imageamento Tridimensional , Mesoderma/citologia , Microscopia Eletrônica de Varredura/métodos , Gravidez , Tomografia Computadorizada por Raios X/métodosRESUMO
In bone tissue regeneration, the use of biomineralized scaffolds to create the 3D porous structure needed for well-fitting with defect size and appropriate cell interactions, is a promising alternative to autologous and heterologous bone grafts. Biomineralized polyurethane (PU) foams are here investigated as scaffold for bone tissue regeneration. Biomineralization of the foams was carried out by activation of PU surface by a two steps procedure performed for different times (1 to 4 weeks). Scaffolds were investigated for morphological, chemico-physical and mechanical properties, as well as for in vitro interaction with rat Bone Marrow Mesenchymal Stem Cells (BMSCs). Untreated and biomineralized PU samples showed a homogenous morphology and regular pore size (average Ø=407µm). Phase and structure of formed calcium phosphates (CaPs) layer onto the PU foam were analyzed by Fourier Transform Infrared spectroscopy and X-ray diffraction, proving the formation of bone-like nano hydroxyapatite. Biomineralization caused a significant increase of mechanical properties of treated foams compared to untreated ones. Biomineralization also affected the PU scaffold cytocompatibility providing a more appropriate surface for cell attachment and proliferation. Considering the obtained results, the proposed scaffold can be considered suitable for bone tissue regeneration.
Assuntos
Durapatita/química , Poliuretanos/química , Animais , Osso e Ossos/citologia , Fosfatos de Cálcio/química , Proliferação de Células/efeitos dos fármacos , Poliuretanos/farmacologia , Ratos , Espectroscopia de Infravermelho com Transformada de Fourier , Engenharia Tecidual/métodos , Difração de Raios XRESUMO
Autologous chondrocyte implantation for cartilage repair represents a challenge because strongly limited by chondrocytes' poor expansion capacity in vitro. Mesenchymal stem cells (MSCs) can differentiate into chondrocytes, while mechanical loading has been proposed as alternative strategy to induce chondrogenesis excluding the use of exogenous factors. Moreover, MSC supporting material selection is fundamental to allow for an active interaction with cells. Here, we tested a novel thermo-reversible hydrogel composed of 8% w/v methylcellulose (MC) in a 0.05 M Na2SO4 solution. MC hydrogel was obtained by dispersion technique and its thermo-reversibility, mechanical properties, degradation and swelling were investigated, demonstrating a solution-gelation transition between 34 and 37 °C and a low bulk degradation (<20%) after 1 month. The lack of any hydrogel-derived immunoreaction was demonstrated in vivo by mice subcutaneous implantation. To induce in vitro chondrogenesis, MSCs were seeded into MC solution retained within a porous polyurethane (PU) matrix. PU-MC composites were subjected to a combination of compression and shear forces for 21 days in a custom made bioreactor. Mechanical stimulation led to a significant increase in chondrogenic gene expression, while histological analysis detected sulphated glycosaminoglycans and collagen II only in loaded specimens, confirming MC hydrogel suitability to support load induced MSCs chondrogenesis.
Assuntos
Materiais Biocompatíveis , Técnicas de Cultura de Células , Diferenciação Celular , Condrogênese , Hidrogéis , Células-Tronco Mesenquimais/citologia , Metilcelulose , Animais , Materiais Biocompatíveis/química , Biomarcadores , Reatores Biológicos , Diferenciação Celular/genética , Condrogênese/genética , Perfilação da Expressão Gênica , Humanos , Teste de Materiais , Células-Tronco Mesenquimais/metabolismo , CamundongosRESUMO
A non-porous poly-DL-lactide tubular chamber filled by demineralised bone matrix (DBM) and bone marrow stromal cells (BMSC) in combination, was evaluated as a scaffold for guided bone regeneration (GBR) in an experimental model using the rabbit radius. The tubular chamber had an internal diameter of 4.7 mm, a wall thickness of 0.4 mm and a length of 18 mm. Autologous BMSC were obtained, under general anaesthesia from rabbit iliac crest and isolated by centrifugation technique. Allogenic DBM was obtained from cortico-cancellous bone of rabbits. In general anaesthesia, a 10-mm defect was bilaterally created in the radii of 10 rabbits. On the right side (experimental side) the defect was bridged with the chamber filled with both BMSC and DBM. On the left side (control side) the defect was treated by positioning DBM and BMSC between the two stumps. At an experimental time of 4 months histology and histomorphometry demonstrated that the presence of a tubular chamber significantly improved bone regrowth in the defect The mean thickness of newly-formed bone inside the chamber was about 56.7+/-3.74% of the normal radial cortex, in comparison with 46.7+/-10.7% when DBM and BMSC without the chamber were placed in the defect, P<0.05). These results confirmed the effectiveness of the chamber as a container for factors promoting bone regeneration.
Assuntos
Implantes Absorvíveis , Células da Medula Óssea/citologia , Matriz Óssea/citologia , Regeneração Óssea , Poliésteres/química , Animais , Técnica de Desmineralização Óssea , Masculino , Coelhos , Rádio (Anatomia) , Células Estromais/citologiaRESUMO
In the present study, twelve explanted mechanical heart valves (MHVs)with pyrolitic carbon tilting disc and 14 bileaflet MHVs were analyzed to investigate the effects of material properties on valve performance and patients' general health conditions. Optical and scanning electron microscopy was used to investigate material imperfections, wear patterns or damages to housing and occluder components. All analyzed tilting disc valves exhibited wear effects, particularly due to abrasion and impact to both disc and housing. Wear of pyrolitic carbon disc and housing did not influence their in vivo performance. In the bileaflet MHVs, breakaway of the pyrolitic carbon coating sometimes caused malfunctioning and required surgical retrieval of the valve. In all cases, occurrence of clinical symptoms was more likely when wear effects were located in critical areas. The study supports a correlation between the properties of the MHVs material and patients' symptoms.
Assuntos
Valva Aórtica , Próteses Valvulares Cardíacas , Valva Mitral , Falha de Prótese , Adulto , Idoso , Pressão Sanguínea , Carbono , Criança , Materiais Revestidos Biocompatíveis , Remoção de Dispositivo , Análise de Falha de Equipamento , Feminino , Humanos , Masculino , Pessoa de Meia-Idade , Estresse Mecânico , Propriedades de SuperfícieRESUMO
Injectable and resorbable hydrogels are an extremely attractive class of biomaterials. They make it possible to fill tissue defects accurately with an undoubtedly minimally invasive approach and to locally deliver cells that support repair or regeneration processes. However, their use as a cell carrier is often hindered by inadequate diffusion in bulk. A possible strategy for overcoming this transport limitation might be represented by injection of rapidly degradable cell-loaded microcapsules, so that maximum material thickness is limited by sphere radius. Here, the possibility of achieving programmable release of viable cells from alginate-based microcapsules was explored in vitro, by evaluating variations in material stability resulting from changes in hydrogel composition and assessing cell viability after encapsulation and in vitro release from microcapsules. Degradation of pure alginate microspheres was varied from a few days to several weeks by varying sodium alginate and calcium chloride concentrations. The addition of poloxamer was also found to accelerate degradation significantly, with capsule breakdown almost complete by two weeks, while chitosan was confirmed to strengthen alginate cross-linking. The presence of viable cells inside microspheres was revealed after encapsulation, and released cells were observed for all the formulations tested after a time interval dependent on bead degradation speed. These findings suggest that it may be possible to fine tune capsule breakdown by means of simple changes in material formulation and regulate, and eventually optimize, cell release for tissue repair.
Assuntos
Terapia Baseada em Transplante de Células e Tecidos/métodos , Hidrogéis , Microesferas , Alginatos/química , Animais , Materiais Biocompatíveis/química , Cloreto de Cálcio/química , Contagem de Células , Linhagem Celular , Sobrevivência Celular , Terapia Baseada em Transplante de Células e Tecidos/instrumentação , Quitosana/química , Desenho de Equipamento , Ácido Glucurônico/química , Ácidos Hexurônicos/química , Hidrogéis/química , Teste de Materiais , Camundongos , Mioblastos/citologia , Mioblastos/fisiologia , Poloxâmero/química , Pressão , Fatores de TempoRESUMO
THE STUDY ASSESSES IN VIVO the surface roughness necessary to reduce plaque colonization on titanium after 24 hours. Three groups of 16 titanium disks were assigned to 3 different polishing groups (A, B, and C). The roughness was evaluated with a laser profilometer and the morphology with a scanning electron microscope (SEM). Eight volunteers were enrolled and two stents were applied in the mandibular posterior region of each. Each stent supported 3 disks, one per group. The volunteers suspended oral hygiene for 24 hours, after which the stents were removed; one was processed for evaluation of the adherent biomass and the other for SEM study. On each specimen a global area of 100 x 125 microns was examined with SEM. The area was composed of five 20 x 25 microns randomly selected fields. For each field the density of bacteria and the morphotypes were recorded. The data quoted for the global area are cumulative of those observed in the 20 x 25 microns fields. Group A had a significantly smoother surface than groups B and C. The adherent microbial biomass determination and SEM evaluation revealed that group A contained less bacteria than the roughest group. The bacterial population was composed of cocci in group A, and of cocci and short and long rods in groups B and C. We conclude that a titanium surface with Ra < or = 0.088 microns and Rz < or = 1.027 microns strongly inhibits accumulation and maturation of plaque at the 24-hour time period and that such smoothness can be achieved in transgingival and healing implant components.
Assuntos
Aderência Bacteriana/fisiologia , Biofilmes/crescimento & desenvolvimento , Implantes Dentários/microbiologia , Polimento Dentário , Titânio/química , Análise de Variância , Biomassa , Contagem de Colônia Microbiana , Placa Dentária/microbiologia , Placa Dentária/prevenção & controle , Humanos , Microscopia Eletrônica de Varredura , Estatísticas não Paramétricas , Propriedades de SuperfícieRESUMO
The in vitro structural stability of poly-ether-urethanes (PEUs) and poly-carbonate-urethanes (PCUs) was examined under strong acidic (HNO3) or alkaline (NaClO) oxidative conditions and in presence of a constant strain state. Polyurethane (PU) samples were represented by sheets solvent-cast from commercial pellets or by tubular specimens cut from commercial catheters. The specimens were strained at 100% uniaxial elongation over appropriate extension devices and completely immersed into the oxidative solutions at 50 degrees C for 7-14 days. The changes induced by the oxidative treatments were then evaluated by molecular weight analysis, tensile mechanical tests, and scanning electron microscopy. In the experiments with solvent-cast samples, the PEU Pellethane was degraded more in the alkaline oxidative conditions and mainly in the absence of an applied uniaxial stress. All the tested PCUs were, on the contrary, more affected by the acidic oxidative agent. All the PCUs proved to have overall better stability than the PEU. The susceptibility to oxidation was also dependent on the shape and bulk/surface organisation acquired by the same polymer during its processing. When the oxidative test was applied to catheters made of a PEU and a PCU, the results confirmed the better stability of poly-carbonate-urethanes.
Assuntos
Materiais Biocompatíveis/química , Cimento de Policarboxilato/química , Poliuretanos/química , Cateterismo , Estabilidade de Medicamentos , Peso Molecular , Oxirredução , Estresse Mecânico , Propriedades de Superfície , Resistência à TraçãoRESUMO
During tissue formation, skeletal muscle precursor cells fuse together to form multinucleated myotubes. To understand this mechanism, in vitro systems promoting cell alignment need to be developed; for this purpose, micrometer-scale features obtained on substrate surfaces by photolithography can be used to control and affect cell behaviour. This work was aimed at investigating how differently microgrooved polymeric surfaces can affect myoblast alignment, fusion and myotube formation in vitro. Microgrooved polymeric films were obtained by solvent casting of a biodegradable poly-l-lactide/trimethylene carbonate copolymer (PLLA-TMC) onto microgrooved silicon wafers with different groove widths (5, 10, 25, 50, 100microm) and depths (0.5, 1, 2.5, 5microm), obtained by a standard photolithographic technique. The surface topography of wafers and films was evaluated by scanning electron microscopy. Cell assays were performed using C2C12 cells and myotube formation was analysed by immunofluorescence assays. Cell alignment and circularity were also evaluated using ImageJ software. The obtained results confirm the ability of microgrooved surfaces to influence myotube formation and alignment; in addition, they represent a novel further improvement to the comprehension of best features to be used. The most encouraging results were observed in the case of microstructured PLLA-TMC films with grooves of 2.5 and 1microm depth, presenting, in particular, a groove width of 50 and 25microm.
Assuntos
Implantes Absorvíveis , Materiais Biocompatíveis/química , Fibras Musculares Esqueléticas/citologia , Fibras Musculares Esqueléticas/fisiologia , Polímeros/química , Engenharia Tecidual/métodos , Animais , Técnicas de Cultura de Células/métodos , Crescimento Celular , Linhagem Celular , Polaridade Celular , Proliferação de Células , Cristalização/métodos , Teste de Materiais , Camundongos , Fotografação/métodos , Porosidade , Propriedades de SuperfícieRESUMO
In bone tissue reconstruction, the use of engineered constructs created by mesenchymal stem cells (MSCs) that differentiate and proliferate into three-dimensional porous scaffolds is an appealing alternative to autologous and heterologous bone grafts. Scaffolds considered in this work are represented by polyurethane (PU) foams. Two PU foams (EC-1 and EC-2) were synthesized and characterized for morphology, mechanical properties and in vitro interaction with the osteoblast-like cell line MG63 and MSCs from human bone marrow. EC-1 and EC-2 showed similar densities (0.20 g cm(-3)) with different morphologies: EC-1 showed a more homogeneous pore size (average Phi = 691 microm) and distribution, with a 35% open porosity, whereas EC-2 evidenced a wide range of pore dimension, with an average pore size of 955 microm and a 74% open porosity. The compressive properties of the two foams were similar in the dry condition and both showed a strong decrease in the wet condition. In vitro tests showed good MG63 cell proliferation, as confirmed by the results of the MTT assay and scanning electron microscopy (SEM) observations, with a higher cell viability on EC-2 foam 7 days post-seeding. In the experiments with MSCs, SEM observations showed the presence of an inorganic phase deposition starting day 7 onto EC-1, day 14 onto EC-2. The inorganic particles (CaP) deposition was much more evident onto the pore surface of both foams at day 30, indicating good differentiation of MSCs into osteoblasts. Both PU foams therefore appeared to stimulate cell adhesion and proliferation in vitro, sustaining the MSCs' growth and differentiation into osteoblasts.
Assuntos
Diferenciação Celular , Células-Tronco Mesenquimais/citologia , Osteoblastos/citologia , Poliuretanos , Linhagem Celular , Proliferação de Células , Humanos , Microscopia Eletrônica de Varredura , Estresse MecânicoRESUMO
New porous scaffolds, with a suitable hydrolytic and enzymatic degradation, useful for tissue engineering applications have been obtained by a carbodiimide mediated reaction between hyaluronan (HA) and a synthetic polymer with a polyaminoacid structure such as alpha,beta-polyaspartylhydrazide (PAHy). Scaffolds with a different molar ratio between PAHy repeating units and HA repeating units have been prepared and characterized from a chemical and physicochemical point of view. Tests of indirect and direct cytotoxicity, cell adhesion, and spreading on these biomaterials have been performed by using murine L929 fibroblasts. The new biomaterials showed a good cell compatibility and ability to allow cell migration into the scaffolds as well as spreading on their surface.
Assuntos
Ácido Hialurônico/química , Peptídeos/química , Engenharia Tecidual , Alicerces Teciduais/química , Animais , Adesão Celular , Movimento Celular , Células Cultivadas , Força Compressiva , Teste de Materiais , Camundongos , PolímerosRESUMO
The in vitro structural stability of polyetherurethanes (PEUs) and polycarbonateurethanes (PCUs and PCUUs) was examined under strong oxidative conditions (0.5N HNO3, pH 0.3; and NaClO, 4% Cl2 available, pH approximately 13) and in the presence of a constant strain state. Solvent-cast dog-bone shaped specimens were strained at 100% uniaxial elongation over extension devices and completely immersed in the oxidative solutions at 50 degrees C for 15 days. Unstrained polyurethane (PU) samples were treated in the same way for comparison. The modification of the PU molecular structure was determined by DSC, GPC, ATR-FTIR, static contact angle, and surface roughness analyses. The incubation in nitric acid and sodium hypochlorite brought about a greater degradation of samples tested under the applied strain with the exception of PEU treated with nitric acid. PEU was the most affected material, showing bulk deterioration in NaClO and significant modifications in nitric acid, with the appearance of new IR bands, which were assigned to oxidation products. A higher phase separation between soft and hard domains occurred in PCUs upon incubation in nitric acid, the treatment with NaClO gave rise to new bands in the IR spectra, denoting the presence of oxidation products at the surface. The surface roughness greatly increased in strained PCUs with SEM evidence of deep cracks and holes or ragged and stretched fractures perpendicular to the direction of stress. PCUU underwent complex chemical modifications with a marked decrease of N-H and urea IR absorptions and showed a lower degradation than PEU and PCUs under mechanical constraint. From these results, sodium hypochlorite appears to be able to create an ESC-like degradation for PUs that are resistant to other aggressive chemical environments.