Insights into Predicting Tooth Extraction from Panoramic Dental Images: Artificial Intelligence vs. Dentists.

OBJECTIVES: Tooth extraction is one of the most frequently performed medical procedures. The indication is based on the combination of clinical and radiological examination and individual patient parameters and should be made with great care. However, determining whether a tooth should be extracted is not always a straightforward decision. Moreover, visual and cognitive pitfalls in the analysis of radiographs may lead to incorrect decisions. Artificial intelligence (AI) could be used as a decision support tool to provide a score of tooth extractability. MATERIAL AND METHODS: Using 26,956 single teeth images from 1,184 panoramic radiographs (PANs), we trained a ResNet50 network to classify teeth as either extraction-worthy or preservable. For this purpose, teeth were cropped with different margins from PANs and annotated. The usefulness of the AI-based classification as well that of dentists was evaluated on a test dataset. In addition, the explainability of the best AI model was visualized via a class activation mapping using CAMERAS. RESULTS: The ROC-AUC for the best AI model to discriminate teeth worthy of preservation was 0.901 with 2% margin on dental images. In contrast, the average ROC-AUC for dentists was only 0.797. With a 19.1% tooth extractions prevalence, the AI model's PR-AUC was 0.749, while the dentist evaluation only reached 0.589. CONCLUSION: AI models outperform dentists/specialists in predicting tooth extraction based solely on X-ray images, while the AI performance improves with increasing contextual information. CLINICAL RELEVANCE: AI could help monitor at-risk teeth and reduce errors in indications for extractions.

Phylogenomics, evolution of trophic traits and divergence times of hemiodontid fishes (Ostariophysi: Characiformes).

The South American characiform family Hemiodontidae comprises five genera and 34 species. The family lacks comprehensive phylogenetic hypotheses resolving its species relationships. The studies that addressed these questions exhibited a narrow taxon sampling or used single-locus markers. Herein we surveyed hundreds of ultraconserved elements (UCEs) loci to provide the first molecular phylogenetic hypothesis and divergence time estimates for hemiodontids encompassing all its genera and most species (27 of the 34 valid species). We also tracked the history of the protractile upper jaw in the genera Argonectes and Bivibranchia across the recovered phylogenies through ancestral state reconstruction. Our results corroborate the monophyly of Hemiodontidae and the genera Argonectes and Bivibranchia in all phylogenetic methods with maximum clade support. The genera Anodus and Hemiodus were not monophyletic because Anodus elongatus was sister to the monotypic Micromischodus instead of A. orinocensis, and H. immaculatus did not form a clade with its other congeners, but instead was sister to the clade including Anodus and Micromischodus. All remaining species of Hemiodus were placed together into a monophyletic group, where they were arranged into four major subclades. The relationship in the family is summarised as: (Bivibranchia, (Argonectes, ((H. immaculatus, (Anodus, Micromischodus)), Hemiodus clade))), in discordance with the morphological phylogeny that placed all genera monophyletic and resolved the family as: ((Anodus, Micromischodus), (Hemiodus, (Argonectes, Bivibranchia))). The origin of Hemiodontidae was estimated from the Late Cretaceous to the Middle Paleogene, with the mean age in the Paleocene, while the origin of most hemiodontid genera except Bivibranchia occurred in the Miocene. Unordered parsimony and likelihood reconstruction indicates that Argonectes and Bivibranchia developed their protractile upper jaw independently.

Ceramic bearings with bilayer coating in cementless total hip arthroplasty. A safe solution. A retrospective study of one hundred and twenty six cases with more than ten years' follow-up.

PURPOSE: Using a ceramic-ceramic bearings, cementless total hip arthroplasty (THA) has provided good clinical results. To ensure longevity a good quality fixation of the implants is mandatory. Different surface treatments had been used, with inconsistent results. We hypothesized that a "bilayer coating" applied to both THA components using validated technology will provide a long-lasting and reliable bone fixation. METHODS: We studied the survival and bone integration of a continuous, single-surgeon, retrospective series of 126 THA cases (116 patients) with an average follow-up of 12.2 years (minimum 10 years). The THA consisted of cementless implants with a bilayer coating of titanium and hydroxyapatite and used a ceramic-ceramic bearing. RESULTS: With surgical revision for any cause (except infection) as the end point, THA survival was 95.1 % at 13 years. Stem (98.8 %) and cup (98.6 %) survival was similar at 13 years. Bone integration was confirmed in 100 % of implants (Engh-Massin score of 17.42 and ARA score of 5.94). There were no instances of loosening. Revisions were performed because of instability (1.6 %), prosthetic impingement or material-related issues. CONCLUSION: A bilayer titanium and hydroxyapatite coating provides strong, fast, reliable osseo integration, without deterioration at the interface or release of damaging particles. The good clinical outcomes expected of ceramic bearings were achieved, as were equally reliable stem and cup fixation.

Equivalent wear performance of dual mobility bearing compared with standard bearing in total hip arthroplasty: in vitro study.

PURPOSE: Osteolysis in total hip arthroplasty (THA) depends on polyethylene wear and dictates the survival of the prosthesis. Dual mobility in THAs, which is claimed to reduce dislocation risk, has very good long-term clinical results. However, little is known about how the liner wears in this design, compared to the standard single mobility model. METHODS: A comparative study looking at wear of a conventional ultra-high-molecular-weight polyethylene liner, using gravimetric measurement, between dual mobility implants and standard implants, was performed on a simulator in accordance with a normed protocol based on the same dimensions, environmental conditions and stresses. A linear regression test was employed. RESULTS: Under the same conditions (loading, cycles, sterilization, material and surface roughness), the gravimetric wear (for conventional polyethylene) is comparable between a standard and a dual mobility cup. This correlates to ten year follow-up results of dual mobility cup. DISCUSSION - CONCLUSION: This in vitro equivalent wear serves to confirm the very good long-term clinical results observed with dual mobility bearing, whose use should not be restricted by concerns about increased polyethylene wear.

A comparative and retrospective study of three hundred and twenty primary Charnley type hip replacements with a minimum follow up of ten years to assess whether a dual mobility cup has a decreased dislocation risk.

PURPOSE: Mid- and long-term follow-up of Charnley total hip arthroplasty (THA) demonstrated good functional results with 85 % survivorship at 25-year follow-up. However, dislocation still remains an unsolved problem. Dislocation may occur throughout the patient's and implant's life. The aim of this study is to answer the question: does a dual mobility cup (DMC) decrease the dislocation risk? METHODS: We report comparative results at ten years of follow-up of two groups of primary cemented Charnley-type THA, one with a standard polyethylene cup (group 1, n = 215) and the other one with a DMC (group 2, n = 105). RESULTS: In group 1, 26 dislocations (12.9 %) occurred. In group 2 only one dislocation (0.9 %) occurred. This dislocation was successfully reduced by closed reduction, without any recurrence. This difference was statistically significant (p = 0.0018). In group 1, the reason for revision was recurrent dislocation in 21 cases. Five patients were revised for other reasons. The global revision rate was 12.9 %. In group 2, two patients needed revision surgery for aseptic loosening. The global revision rate was 2.1 %. This difference was statistically significant (p = 0.054). The goal was reached for the patients of group 2 who had more risks factors for dislocation (age, aetiology, American Society of Anesthesiologists and Devane scores) than those of group 1. CONCLUSIONS: When using a DMC, we observed a low rate of dislocation in primary THA (0.9 %). This surgical choice seems to be a safe and effective technique in Charnley-type THA, especially in a high-risk population.

Cementless dual-mobility cup in total hip arthroplasty revision.

PURPOSE: Dislocation is a frequent complication in total hip arthroplasty (THA) revision. Cup fixation is the second concern. In order to know outcomes at two years, we prospectively followed a continuous series of 78 patients to demonstrate that cementless dual-mobility cup (DMC) used in revision THA is safe as regards dislocation risk and bone fixation. METHOD: We enrolled 78 consecutive patients (79 cases) in a prospective study. Mean interval between index surgery and revision was 12.9 years. Mean age at revision was 75.5 years. Two types of cementless DMC were used: a standard DMC in 68 cases with low-grade bone defect (Paprosky grade 1 and 2), and a specific design reconstruction DMC in 11 cases with severe bone loss (Paprosky grade 3). RESULTS: At two years of follow-up, 68 patients were reviewed; four were lost to follow-up., and six patients were deceased. We identified three types of situations at risk:standard risk (33 cases), Paprosky grade 1 or 2; medium risk (37 cases), revision for recurrent instability (21), periprosthetic fractures (14) or severe loosening Paprosky grade 3 without femorotomy (2); high risk (nine cases), revision for severe loosening with a femorotomy. One (1.3%) patient dislocated her hip at one month without recurrence. Revision rate for dislocation was 0%; two (2.7%) early mechanical failures occurred. CONCLUSION: Considering outcomes of this series, cementless DMC can be suggested in THA revision surgery.

Annotated checklist of Cerambycidae (Coleoptera: Chrysomeloidea) from the Brazilian semi-arid region, with new species and new geographic records.

Cerambycidae is one of the largest families of Coleoptera, with approximately 38,000 species described. Knowledge of Cerambycidae fauna in Brazil has increased in the last 50 years, but some regions, such as the Brazilian semi-arid region, remain relatively unexplored. An updated checklist of Cerambycidae from that region, based on previously published works, checklists, and catalogs, and the study of 331 specimens of 72 species, 58 genera, 26 tribes, and three subfamilies deposited in the collection of the Zoology Museum of the Universidade Estadual de Feira de Santana is provided. This list has 633 species, 303 genera, 58 tribes, of four subfamilies of Cerambycidae from 75 municipalities in nine states in the Brazilian semi-arid region. A map illustrating the distribution of the Cerambycidae species in the semi-arid region is also provided. Four new species are described: Eburodacrys boteroi sp. nov. and Coccoderus costae sp. nov. (Cerambycinae); and Aerenicopsis joseferreirai sp. nov. and Pseudomecas mourai sp. nov. (Lamiinae). The new species are included in an identification key to the respective genus. Furthermore, Antodice kyra Martins & Galileo, 1998 is new record from the Bahia State; Chevrolatella tripunctata (Chevrolat, 1862) is a new record to Brazilian semi-arid region; Colobothea rubroornata Zajciw, 1962 is a new record from Bahia State and Brazilian semi-arid region, and Odontocera bilobata Zajciw, 1965 is a new record from the Bahia State and Brazilian semi-arid region. It is evident that some regions in the Brazilian semi-arid region are poorly sampled and new inventory studies must be carried out.

Population wide testing pooling strategy for SARS-CoV-2 detection using saliva.

SARS-CoV-2 pandemic has forced frequent testing of populations. It is necessary to identify the most cost-effective strategies for the detection of COVID-19 outbreaks. Nasopharyngeal samples have been used for SARS-CoV-2 detection but require a healthcare professional to collect the sample and cause discomfort and pain to the individual. Saliva has been suggested as an appropriate fluid for the diagnosis of COVID-19. We have investigated the possibility of using pools of saliva samples to detect SARS-CoV-2 in symptomatic and asymptomatic patients. Two hundred and seventy-nine saliva samples were analyzed through RT-PCR of Envelope, Nucleocapsid and Open Reading Frame 1ab genes. Reproducibility assays showed an almost perfect agreement as well as high sensitivity (96.6%), specificity (96.8%), positive predicted value (96.6%), and negative predicted value (96.8%). The average Cycle Threshold of the genes detected was 29.7. No significant differences (p > 0.05) were detected when comparing the cycle threshold average of two consecutive reactions on the same positive saliva samples. Saliva samples have a higher median viral load (32.6) than in nasopharyngeal samples (28.9), although no significant differences were detected (p > 0.05). Saliva-pool samples allowed effective SARS-CoV-2 screening, with a higher sensibility (96.9%) on 10-sample pools than in 20-sample pools (87.5%). Regardless of pools size specificity was high (99.9%) and an almost perfect agreement was observed. Our strategy was successfully applied in population wide testing of more than 2000 individuals, showing that it is possible to use pooled saliva as diagnostic fluid for SARS-CoV-2 infection.

Cellulolytic enzymes production guided by morphology engineering.

Endoglucanase and xylanase are critical enzymes for liquefaction and enzyme hydrolysis of high solids lignocellulosic biomass to facilitate its transport and production of desired derived products. Here is reported how combinations of different spore concentrations and pH influence microbial morphology, and how this may be used to direct expression and secretion of enzymes by Aspergillus niger. While xylanase production is not affected by A. niger morphology changes, endoglucanase production is enhanced under conditions of lower stress and by morphology that results in pellets. ß-glucosidase production is enhanced under dispersed morphology, which results in up to fourfold increase of this enzyme production under the tested experimental conditions. A morphologic scale (Y) is proposed based on a form factor that considers the size and frequency of each morphology class, and that points to conditions that result in high selectivity for either endoglucanase or ß-glucosidase production. An equation proposed to relate enzyme activity to morphology provides a useful tool for tuning enzyme production of A. niger, where morphology is a first indication of relative enzyme activities in a fermentation broth.

Analysis of temporary skeletal anchorage devices used for en-masse retraction: a preliminary study.

INTRODUCTION: The aim of this preliminary study was to analyze the results of en-masse incisor and canine retraction with temporary skeletal anchorage devices (TSADs) as the exclusive source of anchorage. METHODS: A retrospective clinical investigation supported by preliminary case reports was performed comparing pretreatment cephalometric radiographs with those taken after en-masse retraction of the 6 anterior teeth. The sample consisted of 17 nongrowing patients with an average age of 24.4 +/- 3.71 years. The average retraction period was 13.94 +/- 5.37 months. No brackets or bands were placed on the posterior dentition during retraction. A total of 34 TSADs were used as the only source of anchorage. Thirty sand-blasted, large-grit, and acid-etched C-implants and 4 miniplates with tubes were used. These TSADs were designed to withstand heavy and dynamic retraction forces applied to the maxillary anterior dentition, thereby eliminating the need for bonded or banded anchor teeth. The cephalometric radiographs were analyzed for differences between pretreatment and postretraction variables that included skeletal, dental, and soft-tissue relationships. RESULTS: Significant incisor and canine retraction was achieved in all patients. During the retraction period, the posterior teeth showed a tendency for extrusion and mesial tipping. CONCLUSIONS: En-masse retraction of the 6 anterior teeth can be accomplished by using TSADs as the only source of anchorage. Maximum anchorage was achieved without appliances in the posterior dentition.

A systematic review of Rhinopetitia Géry (Teleostei, Characiformes, Characidae) with descriptions of four new species and redescription of R. myersi Géry.

Rhinopetitia was known for a long time only by R. myersi, its type species, described from the Ilha do Bananal, Rio Araguaia basin, Tocantins, Brazil. Another recently described species, R. potamorhachia, was considered to differ from R. myersi by having the outer and inner rows of premaxillary teeth with seven to nine cusps, a midlateral dark stripe and a dark humeral blotch (versus outer and inner rows of premaxillary and of maxillary teeth with three to five cusps, and the absence of a dark midlateral stripe). Recently collected specimens from the Araguaia and Tocantins river basins are considered to belong to R. myersi, allowing to better characterize this species which is redescribed herein. Four new species are recognized for the genus, all from Brazil: 1) Rhinopetitia paucirastra, new species, collected from the upper Rio Tocantins drainage, state of Goiás, distinguished from all its congeners mainly by the presence of rudimentary and fewer gill rakers in external row on first gill arch; 2) R. oligolepis, new species originating from the Rio Jamanxim, Rio Tapajós drainage, state of Pará, differing from its congeners by having 4 longitudinal scale rows from dorsal-fin origin to lateral line; 3) R. melanohumeralis, new species, collected from small streams tributaries of the upper Rio Tapajós, and the upper Rio Xingu basins, states of Pará and Mato Grosso, that has the body as deep as in R. paucirastra but has well-developed and more gill rakers in the external row on first branchial arch; and 4) R. nigrofasciata, new species, collected in small tributaries of the upper portions of the Rio Tapajós and Rio Xingu basins, states of Pará and Mato Grosso, with the body narrower than in R. paucirastra and R. melanohumeralis.

Influence of surface characteristics on survival rates of mini-implants.

OBJECTIVE: To compare the clinical performance and the survival rate of two mini-implant systems with different surface characteristics under immediate orthodontic loading. MATERIALS AND METHODS: Seventeen machined titanium (MT) mini-implants and 15 sandblasted, large grit, acid-etched (SLA) mini-implants were placed in 10 patients. The mini-implants were immediately loaded and the patients seen at 7, 14, 30, 60, and 150 days. Clinical parameters such as anatomical location, character of the soft tissue at the screw head emergence, type of mini-implant system, diameter, and length were analyzed. In addition, the insertion torque recorded at the time of insertion was also assessed. Survival rate and clinical parameters were evaluated by the chi-square exact tests using the SAS version 9.1. RESULTS: The overall survival rate was 87.5%. Over the four failing mini-implants, three were MT and one SLA resulting in an individual survival rate of 82.4% and 93.4%, respectively. In the failure group, all the fixtures had their screw emergence at the oral mucosa and recorded a torque range of less than 15 Ncm. The insertion torque statistically influenced the survival rate of the mini-implants (P < .05). Surface treatment, anatomical location, as well as soft tissue emergence were not statistically significant. CONCLUSION: Surface characteristics did not appear to influence survival rates of immediately loaded mini-implants.

A cysteine protease from the latex of Ficus benjamina has in vitro anthelmintic activity against Haemonchus contortus.

Haemonchus contortus is a gastrointestinal nematode that is responsible for high mortality rates in ruminant herds. The resistance of nematodes to synthetic anthelmintics is widespread and requires a continuous search for new bioactive molecules, such as proteins. The objective of this study was to evaluate the anthelmintic potential of a protease purified from the latex of Ficus benjamina against H. contortus . Fresh latex was collected from plants via small incisions in the green stems, the rubber was removed by centrifugation, and the latex protein extract (LPE) was obtained. After LPE fractionation with ammonium sulfate and chromatography of the fraction containing the highest proteolytic activity on CM-cellulose, a cysteine protease (FbP) was purified. FbP has a molecular mass of approximately 23.97 kDa, and its proteolytic activity was stable between pH 6.0 and pH 10 and over a broad temperature range, with optimum activity at 60 °C. FbP inhibited both the development and exsheathment of H. contortus larvae, with 50% effective concentrations of 0.26 and 0.79 mg/mL, respectively. We conclude that this cysteine protease from F. benjamina latex with anthelmintic activity against H. contortus could be a promising alternative for the development of products for use in parasite control programmes.

A new species of Characidium (Characiformes: Crenuchidae) from the Chapada dos Veadeiros, Goiás, Brazil

A new species of Characidium is described from the tributaries of the rio Tocantinzinho, rio Tocantins basin, located in the southern portion of the Chapada dos Veadeiros, at about 1,200 meters of elevation, Goiás, Brazil. The new species can be diagnosed by an unusual combination of two apomorphic features present in distinct clades of Characidium, the presence of a scaleless isthmus in allied to with a single row of dentary teeth. Additionally, the new species has a unique color pattern of inconspicuous vertical bars disconnected from the dorsal midline, forming seven to nine square blotches along body sides, and the presence of a dark saddle-shaped mark at the dorsal-fin base. Osteologically, it can be diagnosed by having the first and second anal-fin proximal radials fused and contacting the third hemal spine, which is branched. The new species also has a peculiar, unusual variation of fin-ray counts among its congeners.(AU)

Uma nova espécie de Characidium é descrita dos riachos tributários do rio Tocantins, bacia do rio Tocantins, localizados na vertente sul da Chapada dos Veadeiros, a aproximadamente 1.200 metros de altitude, Goiás, Brasil. A nova espécie pode ser diagnosticada pela combinação não usual de dois caracteres apomórficos presentes em clados distintos de Characidium, a presença do istmo sem escama em conjunto com uma única série de dentes no dentário. Adicionalmente, a nova espécie tem um padrão de coloração único de barras verticais desconectadas na região dorsal, formando sete a nove manchas quadradas ao longo do lado do corpo, e pela presença de uma mancha em forma de sela na base da nadadeira dorsal. Osteologicamente, ela pode ser diagnosticada por possuir o primeiro e segundo radiais da nadadeira anal fusionados e em contato com o terceiro espinho hemal, que é ramificado. A espécie nova também possui uma variação peculiar e pouco usual no número de raios das nadadeiras entre os congêneres.(AU)

New species of Bryconamericus Eigenmann (Characiformes: Characidae) from the rio Teles Pires, rio Tapajós basin, central Brazil.

A new species of Bryconamericus is described from the rio Teles Pires, a tributary of the rio Tapajós. The new taxon can be distinguished from its congeners by having a short anal fin with 11-13 branched rays, two maxillary teeth, four outer premaxillary teeth, and 34-38 perforated lateral-line scales. Other diagnostic characters of the species are the absence of a caudal-peduncle spot and the presence of a pigmented vertical band at the caudal-fin rays base. The phylogenetic position of the new species is inferred based in two available phylogenetic hypotheses, and a discussion on its generic placement is provided. 

New species of Characidium (Characiformes: Crenuchidae) from the Rio Tapajós and Rio Xingu drainages, Pará, Brazil.

Characidium nana is described from the Rio Xingu and Rio Tapajós drainages. The new species is distinguished from all its congeners by the absence of the inner series of dentary teeth, the absence of the parietal branch of the supraorbital laterosensory canal, the incomplete lateral line, the lack of an adipose fin, the presence of a conspicuous dark blotch on caudal peduncle as well as an evident dark, midlateral stripe, and the presence of 12 circumpeduncular scales. The relationships of the new species and its inclusion among the species of clade C4 are discussed.

A new species of Knodus (Characiformes: Characidae: Stevardiinae) from the rio Aripuanã, rio Madeira basin, Brazil

A new species of the characid genus Knodus is described from the rio Aripuanã (rio Madeira basin). It can be distinguished from its congeners by its very low body depth, the presence of tri- to pentacuspid teeth on the outer premaxillary series, with the median cuspid larger than the lateral ones, the teeth of the inner premaxillary series pentacuspid, distinctly larger than those of the outer series, the maxillary teeth tri- to pentacuspid, with the median cusp slightly larger than the lateral ones, the four anteriormost dentary teeth pentacuspid, the smaller posterior teeth tri- to pentacuspid, a complete lateral line with 36-38 scales, 3 longitudinal scale series from pelvic fin origin to lateral line, and 11-12 circumpeduncular scales. The new species is also compared to incertae sedis species of 'Bryconamericus' from northern South America since phylogenetic studies suggest a closer relationship of those species with Knodus.(AU)

Uma nova espécie de um caracídeo do gênero Knodus é descrita do rio Aripuanã (bacia do rio Madeira). Esta espécie se distingue de suas congeneres por possuir o corpo muito estreito, a presença de dentes tri- a pentacúspides na série externa do pré-maxilar, com a cúspide mediana ligeiramente maior que as cúspides laterais, dentes da série interna pentacúspide, distintamente maiores que os da série externa, dentes do maxilar tri- a pentacúspides com a cúspode central discretamente maior que as laterais, os quatro dentes mais anteriores do dentário pentacuspidados, os dentes mais posteriores tricuspidados a pentacuspidados, a linha lateral complete com 36-38 escamas, 3 séries longitudinais de escamas entre a origem da nadadeira pélvica e a linha lateral, e 11-12 séries longitudinais de escamas circumpedunculares. A nova espécie é comparada com espécies incertae sedis de 'Bryconamericus' do norte da América do Sul uma vez que estudos filogenéticos sugerem a próxima relação daquelas espécies com Knodus.(AU)

A new miniature species of Odontocharacidium (Characiformes: Crenuchidae) from the Río Orinoco basin, Venezuela

A new species of Odontocharacidium is described from the upper Río Orinoco basin, in Venezuela. The new species is distinguished from its only congener, Odontocharacidium aphanes, by the presence of: the antorbital, the parietal branch of the supraorbital laterosensory canal, the postcleithrum 1, the conspicuous bars extending ventrally below the middle portion of the body posteriorly, and two dark round blotches at the tip of the caudal peduncle. With the recognition of an additional species of Odontocharacidium the diagnostic characters of the genus and the variability in the number of maxillary teeth in specimens are discussed.(AU)

Uma nova espécie de Odontocharacidium é descrita para a bacia do alto rio Orinoco, na Venezuela. A nova espécie se distingue da sua única congênere, Odontocharacidium aphanes, pela presença: do antorbital, do ramo parietal do canal látero-sensorial supraorbital, do pós-cleitro 1, de barras conspícuas estendendo-se ventralmente à porção média do corpo e de duas manchas escuras e arredondadas na margem distal do pedúnculo caudal. Com o reconhecimento de uma espécie adicional de Odontocharacidium, são discutidos os caracteres diagnósticos do gênero e a variação no número de dentes maxilares nos espécimes.(AU)

Characterization of Peptides from Capsicum annuum Hybrid Seeds with Inhibitory Activity Against α-Amylase, Serine Proteinases and Fungi.

Over the last several years, the activity of antimicrobial peptides (AMPs), isolated from plant species, against different microorganisms has been demonstrated. More recently, some of these AMPs have been described as potent inhibitors of α-amylases and serine proteinases from insects and mammals. The aim of this work was to obtain AMPs from protein extracts of a hybrid Capsicum (Ikeda × UENF 1381) seeds and to evaluate their microbial and enzyme inhibitory activities. Initially, proteins were extracted from the Capsicum hybrid seeds in buffer (sodium phosphate pH 5.4,) and precipitated with ammonium sulfate (90% saturated). Extract of hybrid seeds was subjected to size exclusion chromatography, and three fractions were obtained: S1, S2 and S3. The amino acid sequence, obtained by mass spectrometry, of the 6 kDa peptide from the S3 fraction, named HyPep, showed 100% identity with PSI-1.2, a serine protease inhibitor isolated from C. annuum seeds, however the bifunctionality of this inhibitor against two enzymes is being shown for the first time in this work. The S3 fraction showed the highest antifungal activity, inhibiting all the yeast strains tested, and it also exhibited inhibitory activity against human salivary and Callosobruchus maculatus α-amylases as well as serine proteinases.

A new species of the sharpshooter genus Onega Distant, 1908 (Hemiptera: Cicadellidae: Cicadellini) from Ecuador and Peru

ABSTRACT Onega comprises nine valid species distributed in South American countries, Bolivia, Colombia, Ecuador, Paraguay and Peru, commonly at high altitudes. The genus has as diagnostic characteristics the transition crown-frons with transversal carina; crown and superior portion of frons with concavities; pronotum wider than transocular width of head; and paraphysis, when present, as a median esclerite. The present paper describes Onega musa sp. nov., from Ecuador and Peru, which can be distinguished from other Onega species by: body mostly yellow, with brown maculae distributed on dorsum; posterior margin of male pygofer serrate, with long microsetae on the basiventral margin; aedeagus with shaft bisinuate with dorsal acute preapical process; female sternite VII with posterior margin slightly convex; and first valvula of ovipositor with 38 noncontiguous teeth. Intraspecific morphological variations are discussed.