Hydrophilic titanium surface modulates early stages of osseointegration in osteoporosis.

OBJECTIVE: Using a mouse osteoporotic model, this study aimed to determine the influence of hydrophilic titanium surfaces on gene expression and bone formation during the osseointegration process. BACKGROUND: Based on the previous evidence, it is plausible to assume that osteoporotic bone has a different potential of bone healing. Therefore, implant surface modification study that aims at enhancing bone formation to further improve short- and long-term clinical outcomes in osteoporosis is necessary. MATERIAL AND METHODS: Fifty female, 3-month-old mice were included in this study. Osteoporosis was induced by ovariectomy (OVX, test group) in 25 mice. The further 25 mice had ovaries exposed but not removed (SHAM, control group). Seven weeks following the ovariectomy procedures, one customized implant (0.7 × 8 mm) of each surface was placed in each femur for both groups. Implants had either a hydrophobic surface (SAE) or a hydrophilic treatment surface (SAE-HD). Calcium (Ca) and phosphorus (P) content was measured by energy-dispersive X-ray spectroscopy (EDS) after 7 days. The femurs were analyzed for bone-to-implant contact (BIC) and bone volume fraction (BV) by nano-computed tomography (nano-CT) after 14 and 28 days. Same specimens were further submitted to histological analysis. Additionally, after 3 and 7 days, implants were removed and cells were collected around the implant to access gene expression profile of key osteogenic (Runx2, Alp, Sp7, Bsp, Sost, Ocn) and inflammatory genes (IL-1ß, IL-10, Tnf-α, and Nos2) by qRT-PCR assay. Statistical analysis was performed by ANOVA and paired t test with significance at P < .05. RESULTS: The amount of Ca and P deposited on the surface due to the mineralization process was higher for SAE-HD compared to SAE on the intra-group analysis. Nano-CT and histology revealed more BV and BIC for SAE-HD in SHAM and OVX groups compared to SAE. Analysis in OVX group showed that most genes (ie, ALP, Runx2) involved in the bone morphogenetic protein (BMP) signaling were significantly activated in the hydrophilic treatment. CONCLUSION: Both surfaces were able to modulate bone responses toward osteoblast differentiation. SAE-HD presented a faster response in terms of bone formation and osteogenic gene expression compared to SAE. Hydrophilic surface in situations of osteoporosis seems to provide additional benefits in the early stages of osseointegration.

Bio-Based Cellulose Acetate Films Reinforced with Lignin and Glycerol.

Two sets of four cellulose acetate (degree of substitution = 2.2) were incorporated with lignin extracted from the macaúba endocarp, before and after being chemically modified to sodium carboxymethyl-lignin and aluminum carboxymethyl-lignin, respectively. The eight membranes were prepared by the casting method after dissolution in acetone and embedded with lignins (0.1% w/w), one without modification (CAc-Lig) and two chemically modified (CAc-CMLNa) and (CAc-CMLAl), compared to membranes of pure acetate (CAc). In group II, in the four membranes prepared, glycerol was added (10% w/w) as a plasticizer. The membranes were characterized by a number of techniques: thermal (differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA)), morphological (scanning electron microscope (SEM) and atomic force microscopy (AFM)), structural (X-ray powder diffraction (XRD)), hydrophobic (contact angle and water vapor permeability), and thermomechanical (dynamic thermal mechanical analysis and tensile tests). The results show that despite some incompatibility with the cellulose acetate, the incorporation of the lignin in a concentration of 0.1% w/w acts as a reinforcement in the membrane, greatly increasing the tension rupture of the material. The presence of glycerol in a concentration of 10% w/w also acts as a reinforcement in all membranes, in addition to increasing the tension rupture. In this study, glycerol and acetate both increased the compatibility of the membranes.

Tissue-specific melt electrowritten polymeric scaffolds for coordinated regeneration of soft and hard periodontal tissues.

Periodontitis is a chronic inflammatory condition that often causes serious damage to tooth-supporting tissues. The limited successful outcomes of clinically available approaches underscore the need for therapeutics that cannot only provide structural guidance to cells but can also modulate the local immune response. Here, three-dimensional melt electrowritten (i.e., poly(ε-caprolactone)) scaffolds with tissue-specific attributes were engineered to guide differentiation of human-derived periodontal ligament stem cells (hPDLSCs) and mediate macrophage polarization. The investigated tissue-specific scaffold attributes comprised fiber morphology (aligned vs. random) and highly-ordered architectures with distinct strand spacings (small 250 µm and large 500 µm). Macrophages exhibited an elongated morphology in aligned and highly-ordered scaffolds, while maintaining their round-shape on randomly-oriented fibrous scaffolds. Expressions of periostin and IL-10 were more pronounced on the aligned and highly-ordered scaffolds. While hPDLSCs on the scaffolds with 500 µm strand spacing show higher expression of osteogenic marker (Runx2) over 21 days, cells on randomly-oriented fibrous scaffolds showed upregulation of M1 markers. In an orthotopic mandibular fenestration defect model, findings revealed that the tissue-specific scaffolds (i.e., aligned fibers for periodontal ligament and highly-ordered 500 µm strand spacing fluorinated calcium phosphate [F/CaP]-coated fibers for bone) could enhance the mimicking of regeneration of natural periodontal tissues.

Orofacial myofunctional therapy associated with the use of the stimulating palatal plate in children with trisomy 21: case studies. / Terapia miofuncional orofacial associada ao uso da placa palatina de memória em crianças com Trissomia do 21: estudo de casos.

Individuals with trisomy 21 may have muscle hypotonia of the speech articulation organs, an enlarged protruding tongue positioned on the floor of the mouth, and a lack of lip closure. The stimulating palatal plate is an intraoral appliance that, associated with myofunctional therapy, aims to improve these children's habitual lip and tongue posture. This study aimed to present the cases of four male children with trisomy 21, with a mean age of 6.7 and a standard deviation of 7.8 months, who used the stimulating palatal plate in association with myofunctional therapy. The children used the plate for 6 months and did exercises based on the orofacial regulation therapy, and their parents received instructions on feeding them and removing deleterious oral habits. In the first session and at the end of the treatment, each child's face was video-recorded for 5 minutes at rest, and two researchers analyzed independently their habitual tongue and lip posture. Participants who began the treatment earlier and had the most severe postural changes had greater tongue and lip posture improvement.

Indivíduos com Trissomia do 21 podem apresentar hipotonia muscular dos órgãos fonoarticulatórios, língua alargada, posicionada no assoalho oral e protrusa e ausência de selamento labial. A placa palatina de memória é um dispositivo intraoral que, associado à terapia miofuncional, visa à melhora da postura habitual dos lábios e da língua dessas crianças. O objetivo deste trabalho foi apresentar os casos de quatro crianças com Trissomia do 21, do sexo masculino, com média de idade de 6,7 e desvio-padrão de 7,8 meses, que fizeram uso da placa palatina de memória de forma associada à terapia miofuncional. As crianças utilizaram a placa por seis meses, realizaram exercícios baseados na terapia de regulação orofacial e receberam orientações quanto à alimentação e retirada de hábitos orais deletérios. Na primeira sessão e ao final do tratamento, foi realizada a gravação de 5 minutos da face de cada criança em repouso e a análise da postura habitual de língua e de lábios foi realizada por dois pesquisadores independentes. Observou-se maior melhora da postura de língua e de lábios dos participantes que iniciaram o tratamento mais precocemente e que apresentavam as alterações posturais mais severas.

Gelatin methacryloyl hydrogel as an injectable scaffold with multi-therapeutic effects to promote antimicrobial disinfection and angiogenesis for regenerative endodontics.

Regenerative endodontics represents a paradigm shift in dental pulp therapy for necrotic young permanent teeth. However, there are still challenges associated with attaining maximum root canal disinfection while supporting angiogenesis and preserving resident stem cells viability and differentiation capacity. Here, we developed a hydrogel system by incorporating antibiotic-eluting fiber-based microparticles in gelatin methacryloyl (GelMA) hydrogel to gather antimicrobial and angiogenic properties while prompting minimum cell toxicity. Minocycline (MINO) or clindamycin (CLIN) was introduced into a polymer solution and electrospun into fibers, which were further cryomilled to attain MINO- or CLIN-eluting fibrous microparticles. To obtain hydrogels with multi-therapeutic effects, MINO- or CLIN-eluting microparticles were suspended in GelMA at distinct concentrations. The engineered hydrogels demonstrated antibiotic-dependent swelling and degradability while inhibiting bacterial growth with minimum toxicity in dental-derived stem cells. Notably, compared to MINO, CLIN hydrogels enhanced the formation of capillary-like networks of endothelial cells in vitro and the presence of widespread vascularization with functioning blood vessels in vivo. Our data shed new light onto the clinical potential of antibiotic-eluting gelatin methacryloyl hydrogel as an injectable scaffold with multi-therapeutic effects to promote antimicrobial disinfection and angiogenesis for regenerative endodontics.

Self-assembling peptide-laden electrospun scaffolds for guided mineralized tissue regeneration.

OBJECTIVES: Electrospun scaffolds are a versatile biomaterial platform to mimic fibrillar structure of native tissues extracellular matrix, and facilitate the incorporation of biomolecules for regenerative therapies. Self-assembling peptide P11-4 has emerged as a promising strategy to induce mineralization; however, P11-4 application has been mostly addressed for early caries lesions repair on dental enamel. Here, to investigate P11-4's efficacy on bone regeneration, polymeric electrospun scaffolds were developed, and then distinct concentrations of P11-4 were physically adsorbed on the scaffolds. METHODS: P11-4-laden and pristine (P11-4-free) electrospun scaffolds were immersed in simulated body fluid and mineral precipitation identified by SEM. Functional groups and crystalline phases were analyzed by FTIR and XRD, respectively. Cytocompatibility, mineralization, and gene expression assays were conducted using stem cells from human exfoliated deciduous teeth. To investigate P11-4-laden scaffolds potential to induce in vivo mineralization, an established rat calvaria critical-size defect model was used. RESULTS: We successfully synthesized nanofibrous (∼ 500 nm fiber diameter) scaffolds and observed that functionalization with P11-4 did not affect the fibers' diameter. SEM images indicated mineral precipitation, while FTIR and XRD confirmed apatite-like formation and crystallization for P11-4-laden scaffolds. In addition, P11-4-laden scaffolds were cytocompatible, highly stimulated cell-mediated mineral deposition, and upregulated the expression of mineralization-related genes compared to pristine scaffolds. P11-4-laden scaffolds led to enhanced in vivo bone regeneration after 8 weeks compared to pristine PCL. SIGNIFICANCE: Electrospun scaffolds functionalized with P11-4 are a promising strategy for inducing mineralized tissues regeneration in the craniomaxillofacial complex.

Analysis In Vivo of Bone Modulation in Hydrophilic and Hydrophobic Titanium Implant Surfaces.

PURPOSE: To evaluate whether a hydrophilic surface treatment compared with a hydrophobic implant surface can enhance osseointegration by analysis of calcium deposition, bone-to-implant contact (BIC), bone volume (BV), and upregulation of genes involved in bone formation. MATERIALS AND METHODS: Sixty implants (n = 60) with a hydrophobic (SAE) or hydrophilic (SAE-HD) surface treatment were placed bilaterally in each femur of 3-month-old male mice (n = 30). Scanning electron microscopy (SEM) and energy-dispersive x-ray spectroscopy (EDS) were utilized for quantifying the presence of calcium on the implant surface 7 days after implant placement. The specimens were analyzed after 14 and 21 days for BIC and BV by Nano CT scanning followed by histologic evaluation. Additionally, 1, 3, and 7 days postsurgery, femurs were harvested, implants were explanted, and gene expression (Sp7, Bsp, Sost, IL-1α, and IL-10) by quantitative real-time polymerase chain reaction was studied. Moreover, implants were characterized for surface roughness area. Data were statistically analyzed with two-way analysis of variance (ANOVA) followed by the Tukey test (P < .05). RESULTS: The amount of calcium on the surface was higher for SAE-HD after 7 days. Nano CT revealed significantly more BV in the SAE-HD than the SAE surface. The histologic assessment showed increased BIC in SAE-HD in comparison to SAE. SAEHD showed significantly increased levels of genes involved in bone formation. CONCLUSION: Both surfaces were able to modulate bone responses toward osteoblast differentiation. SAE-HD presented a better response compared with SAE.

Metformin-loaded nanospheres-laden photocrosslinkable gelatin hydrogel for bone tissue engineering.

The aim of this investigation was to engineer metformin (MF)-loaded mesoporous silica nanospheres (MSNs)-laden gelatin methacryloyl (GelMA) photocrosslinkable hydrogels and test their effects on the mechanical properties, swelling ratio, drug release, cytocompatibility, and osteogenic differentiation of stem cells from human exfoliated deciduous teeth (SHEDs). As-received and carboxylated MSNs (MSNs-COOH) were characterized by scanning and transmission electron microscopies (SEM and TEM), as well as Fourier-transform infrared spectroscopy (FTIR) prior to hydrogel modification. MF-MSNs-COOH were obtained by loading MF into MSNs at a 1:1 mass ratio. Upon MSNs-COOH laden-hydrogels fabrication, the mechanical properties, swelling ratio and MF release were evaluated. SHEDs were seeded on the hydrogels and cytocompatibility was examined. The effects of the MF-MSNs-COOH/GelMA on the osteogenic differentiation of SHEDs were measured by ALP activity, Alizarin Red assay, and Real-time PCR. Statistics were performed using one-way ANOVA (α = 0.05). Morphological (SEM and TEM) analyses of pristine and carboxylated MSNs revealed a mean particle size of 200 nm and 218 nm, respectively. Importantly, an intrinsic nanoporous structure was noticed. Incorporation of MSNs-COOH at 1.5 mg/mL in GelMA led to the highest compressive modulus and swelling ratio. The addition of MSNs-COOH (up to 3 mg/mL) in GelMA did not impact cell viability. The presence of MF in MSNs-COOH/GelMA significantly promoted cell proliferation. Significant upregulation of osteogenic-related genes (except OCN) were seen for modified (MSNs-COOH and MF-MSNs-COOH) hydrogels when compared to GelMA. Altogether, the engineered MF-MSNs-COOH/GelMA shows great promise in craniomaxillofacial applications as an injectable, cell-free and bioactive therapeutics for bone regeneration.

Injectable Multifunctional Drug Delivery System for Hard Tissue Regeneration under Inflammatory Microenvironments.

Engineering multifunctional hydrogel systems capable of amplifying the regenerative capacity of endogenous progenitor cells via localized presentation of therapeutics under tissue inflammation is central to the translation of effective strategies for hard tissue regeneration. Here, we loaded dexamethasone (DEX), a pleotropic drug with anti-inflammatory and mineralizing abilities, into aluminosilicate clay nanotubes (halloysite clay nanotubes (HNTs)) to engineer an injectable multifunctional drug delivery system based on photo-cross-linkable gelatin methacryloyl (GelMA) hydrogel. In detail, a series of hydrogels based on GelMA formulations containing distinct amounts of DEX-loaded nanotubes was analyzed for physicochemical and mechanical properties and kinetics of DEX release as well as compatibility with mesenchymal stem cells from human exfoliated deciduous teeth (SHEDs). The anti-inflammatory response and mineralization potential of the engineered hydrogels were determined in vitro and in vivo. DEX conjugation with HNTs was confirmed by FTIR analysis. The incorporation of DEX-loaded nanotubes enhanced the mechanical strength of GelMA with no effect on its degradation and swelling ratio. Scanning electron microscopy (SEM) images demonstrated the porous architecture of GelMA, which was not significantly altered by DEX-loaded nanotubes' (HNTs/DEX) incorporation. All GelMA formulations showed cytocompatibility with SHEDs (p < 0.05) regardless of the presence of HNTs or HNTs/DEX. However, the highest osteogenic cell differentiation was noticed with the addition of HNT/DEX 10% in GelMA formulations (p < 0.01). The controlled release of DEX over 7 days restored the expression of alkaline phosphatase and mineralization (p < 0.0001) in lipopolysaccharide (LPS)-stimulated SHEDs in vitro. Importantly, in vivo data revealed that DEX-loaded nanotube-modified GelMA (5.0% HNT/DEX 10%) led to enhanced bone formation after 6 weeks (p < 0.0001) compared to DEX-free formulations with a minimum localized inflammatory response after 7 days. Altogether, our findings show that the engineered DEX-loaded nanotube-modified hydrogel may possess great potential to trigger in situ mineralized tissue regeneration under inflammatory conditions.

A Highly Ordered, Nanostructured Fluorinated CaP-Coated Melt Electrowritten Scaffold for Periodontal Tissue Regeneration.

Periodontitis is a chronic inflammatory, bacteria-triggered disorder affecting nearly half of American adults. Although some level of tissue regeneration is realized, its low success in complex cases demands superior strategies to amplify regenerative capacity. Herein, highly ordered scaffolds are engineered via Melt ElectroWriting (MEW), and the effects of strand spacing, as well as the presence of a nanostructured fluorinated calcium phosphate (F/CaP) coating on the adhesion/proliferation, and osteogenic differentiation of human-derived periodontal ligament stem cells, are investigated. Upon initial cell-scaffold interaction screening aimed at defining the most suitable design, MEW poly(ε-caprolactone) scaffolds with 500 µm strand spacing are chosen. Following an alkali treatment, scaffolds are immersed in a pre-established solution to allow for coating formation. The presence of a nanostructured F/CaP coating leads to a marked upregulation of osteogenic genes and attenuated bacterial growth. In vivo findings confirm that the F/CaP-coated scaffolds are biocompatible and lead to periodontal regeneration when implanted in a rat mandibular periodontal fenestration defect model. In aggregate, it is considered that this work can contribute to the development of personalized scaffolds capable of enabling tissue-specific differentiation of progenitor cells, and thus guide simultaneous and coordinated regeneration of soft and hard periodontal tissues, while providing antimicrobial protection.

Personalized and Defect-Specific Antibiotic-Laden Scaffolds for Periodontal Infection Ablation.

Periodontitis compromises the integrity and function of tooth-supporting structures. Although therapeutic approaches have been offered, predictable regeneration of periodontal tissues remains intangible, particularly in anatomically complex defects. In this work, personalized and defect-specific antibiotic-laden polymeric scaffolds containing metronidazole (MET), tetracycline (TCH), or their combination (MET/TCH) were created via electrospinning. An initial screening of the synthesized fibers comprising chemo-morphological analyses, cytocompatibility assessment, and antimicrobial validation against periodontopathogens was accomplished to determine the cell-friendly and anti-infective nature of the scaffolds. According to the cytocompatibility and antimicrobial data, the 1:3 MET/TCH formulation was used to obtain three-dimensional defect-specific scaffolds to treat periodontally compromised three-wall osseous defects in rats. Inflammatory cell response and new bone formation were assessed by histology. Micro-computerized tomography was performed to assess bone loss in the furcation area at 2 and 6 weeks post implantation. Chemo-morphological and cell compatibility analyses confirmed the synthesis of cytocompatible antibiotic-laden fibers with antimicrobial action. Importantly, the 1:3 MET/TCH defect-specific scaffolds led to increased new bone formation, lower bone loss, and reduced inflammatory response when compared to antibiotic-free scaffolds. Altogether, our results suggest that the fabrication of defect-specific antibiotic-laden scaffolds holds great potential toward the development of personalized (i.e., patient-specific medication) scaffolds to ablate infection while affording regenerative properties.

Acute caffeine mouth rinsing does not improve 10-km running performance in CYP1A2 C-allele carriers.

PURPOSE: This study assessed whether caffeine mouth rinsing affects 10-km run performance and vertical jump in recreational runners. METHODS: A double-blind, placebo-controlled, crossover study was conducted. Ten well-trained volunteers performed two trials, following caffeine or placebo mouth rinse, separated by seven days. Immediately before the 10-km run, a 10-second mouth rinse with either 300 mg of caffeine (1.2%) or microcrystalline cellulose (placebo) diluted in 25 mL of water was performed. Pre- and post-exercise, participants performed a vertical jump test. A Garmin Forerunner® GPS, was used to measure 10-km running time and an 11-point Borg scale was used post-exercise to measure ratings of perceived exertion. Blood samples were also collected during the visit in the laboratory in the afternoon period to classify individuals according to their CYP1A2 genotype. Vertical jump performance was evaluated using a force plate. RESULTS: Nine runners (90%) were CC homozygotes and one (10%) was an AC heterozygote for CYP1A2. There was no difference in 10-km time-trial performance (Placebo: 47.07 ± 5.18 vs. CAF: 47.45 ± 6.34 min, p = 0.89), ratings of perceived exertion (Placebo: 17 ± 1 vs. CAF: 16 ± 2, p = 0.34) or vertical jump power (Placebo, Pre: 4.5 ± 0.6 W•kg-1 and Post: 4.5 ± 0.7 W•kg-1; CAF: Pre: 4.4 ± 0.7 W•kg-1 and Post: 4.4 ± 0.8 W•kg-1, d = 0.21, p = 0.66) between trials. CONCLUSION: Acute caffeine mouth rinsing (1.2%) did not improve 10-km performance and showed similar null effects on vertical jump performance in CYP1A2 C-allele carriers.

Extracellular Matrix/Amorphous Magnesium Phosphate Bioink for 3D Bioprinting of Craniomaxillofacial Bone Tissue.

Bioprinting, a promising field in regenerative medicine, holds great potential to create three-dimensional, defect-specific vascularized bones with tremendous opportunities to address unmet craniomaxillofacial reconstructive challenges. A cytocompatible bioink is a critical prerequisite to successfully regenerate functional bone tissue. Synthetic self-assembling peptides have a nanofibrous structure resembling the native extracellular matrix (ECM), making them an excellent bioink component. Amorphous magnesium phosphates (AMPs) have shown greater levels of resorption while maintaining high biocompatibility, osteoinductivity, and low inflammatory response, as compared to their calcium phosphate counterparts. Here, we have established a novel bioink formulation (ECM/AMP) that combines an ECM-based hydrogel containing 2% octapeptide FEFEFKFK and 98% water with AMP particles to realize high cell function with desirable bioprintability. We analyzed the osteogenic differentiation of dental pulp stem cells (DPSCs) encapsulated in the bioink, as well as in vivo bone regeneration, to define the potential of the formulated bioink as a growth factor-free bone-forming strategy. Cell-laden AMP-modified bioprinted constructs showed an improved cell morphology but similar cell viability (∼90%) compared to their AMP-free counterpart. In functional assays, the cell-laden bioprinted constructs modified with AMP exhibited a high level of mineralization and osteogenic gene expression without the use of growth factors, thus suggesting that the presence of AMP-triggered DPSCs' osteogenic differentiation. Cell-free ECM-based bioprinted constructs were implanted in vivo. In comparison with the ECM group, bone volume per total volume for ECM/1.0AMP was approximately 1.7- and 1.4-fold higher at 4 and 8 weeks, respectively. Further, a significant increase in the bone density was observed in ECM/1.0AMP from 4 to 8 weeks. These results demonstrate that the presence of AMP in the bioink significantly increased bone formation, thus showing promise for in situ bioprinting strategies. We foresee significant potential in translating this innovative bioink toward the regeneration of patient-specific bone tissue for regenerative dentistry.

Bioactive amorphous magnesium phosphate-polyetheretherketone composite filaments for 3D printing.

OBJECTIVE: The aim of this study was to develop bioactive and osseointegrable polyetheretherketone (PEEK)-based composite filaments melt-blended with novel amorphous magnesium phosphate (AMP) particles for 3D printing of dental and orthopedic implants. MATERIALS AND METHODS: A series of materials and biological analyses of AMP-PEEK were performed. Thermal stability, thermogravimetric and differential scanning calorimetry curves of as-synthesized AMP were measured. Complex viscosity, elastic modulus and viscous modulus were determined using a rotational rheometer. In vitro bioactivity was analyzed using SBF immersion method. SEM, EDS and XRD were used to study the apatite-forming ability of the AMP-PEEK filaments. Mouse pre-osteoblasts (MC3T3-E1) were cultured and analyzed for cell viability, proliferation and gene expression. For in vivo analyses, bare PEEK was used as the control and 15AMP-PEEK was chosen based on its in vitro cell-related results. After 4 or 12 weeks, animals were euthanized, and the femurs were collected for micro-computed tomography (µ-CT) and histology. RESULTS: The collected findings confirmed the homogeneous dispersion of AMP particles within the PEEK matrix with no phase degradation. Rheological studies demonstrated that AMP-PEEK composites are good candidates for 3D printing by exhibiting high zero-shear and low infinite-shear viscosities. In vitro results revealed enhanced bioactivity and superior pre-osteoblast cell function in the case of AMP-PEEK composites as compared to bare PEEK. In vivo analyses further corroborated the enhanced osseointegration capacity for AMP-PEEK implants. SIGNIFICANCE: Collectively, the present investigation demonstrated that AMP-PEEK composite filaments can serve as feedstock for 3D printing of orthopedic and dental implants due to enhanced bioactivity and osseointegration capacity.

Highly tunable bioactive fiber-reinforced hydrogel for guided bone regeneration.

One of the most damaging pathologies that affects the health of both soft and hard tissues around the tooth is periodontitis. Clinically, periodontal tissue destruction has been managed by an integrated approach involving elimination of injured tissues followed by regenerative strategies with bone substitutes and/or barrier membranes. Regrettably, a barrier membrane with predictable mechanical integrity and multifunctional therapeutic features has yet to be established. Herein, we report a fiber-reinforced hydrogel with unprecedented tunability in terms of mechanical competence and therapeutic features by integration of highly porous poly(ε-caprolactone) fibrous mesh(es) with well-controlled 3D architecture into bioactive amorphous magnesium phosphate-laden gelatin methacryloyl hydrogels. The presence of amorphous magnesium phosphate and PCL mesh in the hydrogel can control the mechanical properties and improve the osteogenic ability, opening a tremendous opportunity in guided bone regeneration (GBR). Results demonstrate that the presence of PCL meshes fabricated via melt electrowriting can delay hydrogel degradation preventing soft tissue invasion and providing the mechanical barrier to allow time for slower migrating progenitor cells to participate in bone regeneration due to their ability to differentiate into bone-forming cells. Altogether, our approach offers a platform technology for the development of the next-generation of GBR membranes with tunable mechanical and therapeutic properties to amplify bone regeneration in compromised sites. STATEMENT OF SIGNIFICANCE: In this study, we developed a fiber-reinforced hydrogel platform with unprecedented tunability in terms of mechanical competence and therapeutic features for guided bone regeneration. We successfully integrated highly porous poly(ε-caprolactone) [PCL] mesh(es) into amorphous magnesium phosphate-laden hydrogels. The stiffness of the engineered hydrogel was significantly enhanced, and this reinforcing effect could be modulated by altering the number of PCL meshes and tailoring the AMP concentration. Furthermore, the fiber-reinforced hydrogel showed favorable cellular responses, significantly higher rates of mineralization, upregulation of osteogenic-related genes and bone formation. In sum, these fiber-reinforced membranes in combination with therapeutic agent(s) embedded in the hydrogel offer a robust, highly tunable platform to amplify bone regeneration not only in periodontal defects, but also in other craniomaxillofacial sites.

Injectable MMP-Responsive Nanotube-Modified Gelatin Hydrogel for Dental Infection Ablation.

A photocrosslinkable gelatin methacryloyl (GelMA) hydrogel has been widely examined in regenerative engineering because of its good cell-tissue affinity and degradability in the presence of matrix metalloproteinases. A halloysite aluminosilicate nanotube (HNT) is a known reservoir for the loading and sustained delivery of therapeutics. Here, we formulate injectable chlorhexidine (CHX)-loaded nanotube-modified GelMA hydrogel that is cytocompatible and biodegradable and provides sustained release of CHX for infection ablation while displaying good biocompatibility. The effects of HNTs and CHX on hydrogel degradability and mechanical properties, as well as on the kinetics of CHX release, and on the antimicrobial efficacy against oral pathogens were systematically assessed. Cytocompatibility in stem cells from human exfoliated deciduous teeth and inflammatory response in vivo using a subcutaneous rat model were determined. Our hydrogel system, that is, (CHX)-loaded nanotube-modified GelMA showed minimum localized inflammatory responses, supporting its ability for drug delivery applications. Moreover, we showed that the incorporation of CHX-loaded nanotubes reduces the mechanical properties, increases the swelling ratio, and diminishes the degradation rate of the hydrogels. Importantly, the presence of CHX-loaded nanotubes inhibits bacterial growth with minimal cell toxicity. Our findings provide a new strategy to modify GelMA hydrogel with chlorhexidine-loaded nanotubes for clinical use as an injectable drug delivery strategy for dental infection ablation.

Curcumin-A Natural Medicament for Root Canal Disinfection: Effects of Irrigation, Drug Release, and Photoactivation.

INTRODUCTION: Curcumin incorporation into polymeric fibers was tested for its antimicrobial properties and potential use in root canal disinfection. METHODS: Curcumin-modified fibers were processed via electrospinning and tested against a 7-day old established Actinomyces naeslundii biofilm. The medicaments tested were as follows: curcumin-modified fibers at 2.5 and 5.0 mg/mL, curcumin-based irrigant at 2.5 and 5.0 mg/mL, saline solution (negative control), and the following positive controls: 2% chlorhexidine, 1% sodium hypochlorite, and triple antibiotic paste (TAP, 1 mg/mL). All medicaments, except for the positive controls, were allocated according to the light exposure protocol (ie, photoactivation with a light-emitting diode every 30 seconds for 4 minutes or without photoactivation). After treatment, the medicaments were removed, and 1 mL saline solution was added; the biofilm was scraped from the well and used to prepare a 1:2000 dilution. Spiral plating was performed using anaerobic blood agar plates. After 24 hours, colony-forming units (colony-forming units/mL, n = 11/group) were counted to determine the antimicrobial effects. RESULTS: Data exhibited significant antimicrobial effects on the positive control groups followed by the curcumin irrigants and, lastly, the photoactivated curcumin-modified fibers. There was a significant reduction of viable bacteria in curcumin-based irrigants, which was greater than the TAP-treated group. Curcumin-free fibers, saline, and the nonphotoactivated curcumin-modified fibers did not display antimicrobial activity. CONCLUSIONS: Curcumin seems to be a potential alternative to TAP when controlling infection, but it requires a minimal concentration (2.5 mg/mL) to be effective. Photoactivation of curcumin-based medicaments seems to be essential to obtain greater antibiofilm activity.

Effect of Surgical Installation of Dental Implants on Surface Topography and Its Influence on Osteoblast Proliferation.

Surface treatment alone does not determine the final microtopography of a dental implant, which can be influenced by implant design and the surgical procedure. This study investigated the effect of surgical placement of dental implants with same surface treatments on surface roughness. Three implants (SIN) of each group with different macrogeometries (Strong, Stylus, and Tryon) were analyzed using laser interferometry and scanning electron microscopy to evaluate surface topography. All threaded regions of the implants, namely, top, flank, and valley, were analyzed individually. Relevant surface parameters (S a, S sk, S ku, S tr, and S dq) were calculated for the different regions on each implant before (B) (n = 9) and after (A) (n = 9) placement into porcine rib bones. The behavior and proliferation of a preosteoblastic cell line MC3T3-E1 on titanium surface, cell viability, and osteopontin secretion were evaluated after 24 h, 48 h, and 96 h, also before (n = 18) and after (n = 18) implant placement into porcine ribs bone. As results, the valleys of all implants had an increase in S a values after implant placement. By contrast, the tops of the Stylus A implant and the flanks of the Tryon A implant showed a significant decrease in mean height of the irregularities (S a), 0.16 µm and 1.25 µm, respectively. The Stylus implant presented significantly (p < 0.05) higher asymmetry values on the distribution curve for irregularity heights (S ku) in all regions after insertion into bone (6.99 for tops, 9.54 for flanks, and 17.64 for valleys), indicating a greater preponderance of peaks over valleys. An increase in roughness gradients (S dq) was observed for all macrogeometries after insertion into bone. The cell culture results showed no significant difference (p > 0.05) for all macrogeometries after bone placement. In conclusion, a subtle change in implant surface roughness was detected after insertion into bone for all the macrogeometries, without significantly affecting the cellular parameters studied.

Terapia miofuncional orofacial associada ao uso da placa palatina de memória em crianças com Trissomia do 21: estudo de casos / Orofacial myofunctional therapy associated with the use of the stimulating palatal plate in children with trisomy 21: case studies

RESUMO Indivíduos com Trissomia do 21 podem apresentar hipotonia muscular dos órgãos fonoarticulatórios, língua alargada, posicionada no assoalho oral e protrusa e ausência de selamento labial. A placa palatina de memória é um dispositivo intraoral que, associado à terapia miofuncional, visa à melhora da postura habitual dos lábios e da língua dessas crianças. O objetivo deste trabalho foi apresentar os casos de quatro crianças com Trissomia do 21, do sexo masculino, com média de idade de 6,7 e desvio-padrão de 7,8 meses, que fizeram uso da placa palatina de memória de forma associada à terapia miofuncional. As crianças utilizaram a placa por seis meses, realizaram exercícios baseados na terapia de regulação orofacial e receberam orientações quanto à alimentação e retirada de hábitos orais deletérios. Na primeira sessão e ao final do tratamento, foi realizada a gravação de 5 minutos da face de cada criança em repouso e a análise da postura habitual de língua e de lábios foi realizada por dois pesquisadores independentes. Observou-se maior melhora da postura de língua e de lábios dos participantes que iniciaram o tratamento mais precocemente e que apresentavam as alterações posturais mais severas.

ABSTRACT Individuals with trisomy 21 may have muscle hypotonia of the speech articulation organs, an enlarged protruding tongue positioned on the floor of the mouth, and a lack of lip closure. The stimulating palatal plate is an intraoral appliance that, associated with myofunctional therapy, aims to improve these children's habitual lip and tongue posture. This study aimed to present the cases of four male children with trisomy 21, with a mean age of 6.7 and a standard deviation of 7.8 months, who used the stimulating palatal plate in association with myofunctional therapy. The children used the plate for 6 months and did exercises based on the orofacial regulation therapy, and their parents received instructions on feeding them and removing deleterious oral habits. In the first session and at the end of the treatment, each child's face was video-recorded for 5 minutes at rest, and two researchers analyzed independently their habitual tongue and lip posture. Participants who began the treatment earlier and had the most severe postural changes had greater tongue and lip posture improvement.

Influência da idade e do tempo de uso da Placa Palatina de Memória por crianças com Trissomia do 21 nas mudanças miofuncionais orofaciais percebidas pelos pais, na adaptação e satisfação da família após quatro meses de tratamento / nfluence of age and time of use of the Stimulating Palatal Plate by children with Trisomy 21 on orofacial myofunctional changes perceived by parents, children's adaptation, and family's satisfaction after four months of treatment / Influencia de la edad y el tiempo de uso de la placa de memoria palatina por niños con trisomía 21 sobre los cambios miofuncionales orofaciales percibidos por los padres, adaptación y satisfacción familiar después de cuatro meses de tratamiento

Objetivo: verificar se a idade das crianças com Trissomia do 21 e o tempo de uso por dia da placa palatina de memória influenciam a adaptação da criança à placa, as mudanças miofuncionais orofaciais percebidas pelos pais e a satisfação da família, após quatro meses de tratamento. Métodos: participaram do estudo14 pais ou responsáveis legais de crianças com Trissomia do 21, com idades de 3 a 20 meses. O tratamento com a placa palatina de memória foi realizado durante quatro meses. A adaptação da criança à placa, as mudanças miofuncionais orofaciais percebidas pelos pais e a satisfação das famílias em relação ao tratamento foram investigadas por meio de questionário elaborado pelos autores da pesquisa e respondido pelas mães após quatro meses de tratamento. Resultados: a média de idade das crianças que participaram do estudo foi 10 meses e o desvio-padrão de 4,9 meses. O resultado do questionário indicou associação entre idade e postura de lábios relatada pelos pais com o uso da placa palatina de memória, sendo que todas as crianças menores de 10 meses mantiveram o selamento labial, de acordo com os pais, durante o uso da placa; bem como entre idade e satisfação com o tratamento, sendo que as mães das crianças menores mostraram-se mais satisfeitas. Conclusão: os resultados do estudo indicam que houve associação entre idade e postura de lábios relatada pelos pais com o uso da placa, bem como entre idade e satisfação com o tratamento e sugerem que o tratamento precoce com a placa palatina de memória beneficia as crianças com Trissomia do 21. (AU)

Purpose: to verify if the age of children with Trisomy 21 and the time of use per day of the stimulating palatal plate influence the child's adaptation to the plate, the orofacial myofunctional changes perceived by the parents, and the family's satisfaction, after four months of treatment. Methods: 14 parents or legal guardians of children with Trisomy 21, aged between 3 and 20 months, participated in the study. Treatment with the stimulating palatal plate was carried out for four months. The child's adaptation to the plate, the orofacial myofunctional changes perceived by the parents, and the families' satisfaction with the treatment were investigated through a questionnaire prepared by the research authors and answered by the mothers after four months of treatment. Results: The mean age of the children who participated in the study was 10 months and the standard deviation was 4.9 months. The results of the questionnaire indicated an association between age and lip posture, reported by parents, during the use of the stimulating palatal plate, and all children under 10 months maintained lip closure, according to the parents, during the use of the plate. Age was also associated with satisfaction with the service, as the mothers of younger children were more satisfied. Conclusion: The study results indicate an association between age and lip posture, reported by the parents, during the use of the plate, and between age and satisfaction with the service. Thus, it suggests that early treatment with the stimulating palatal plate benefits children with Trisomy 21. (AU)

Objetivo: verificar si la edad de los niños con Trisomía 21 y el tiempo de uso por día de la placa palatina de memoria influyen en la adaptación del niño a la placa, los cambios miofuncionales orofaciales percibidos por los padres y la satisfacción de la familia, después de cuatro meses de tratamiento. Métodos: Participaron en el estudio 14 padres o tutores legales de niños con trisomía 21, con edades comprendidas entre los 3 y los 20 meses. El tratamiento con la placa de memoria palatina se llevó a cabo durante cuatro meses. La adaptación del niño al plato, los cambios miofuncionales orofaciales percibidos por los padres y la satisfacción de las familias con el tratamiento fueron investigados a través de un cuestionario elaborado por los autores y respondido por las madres, después de cuatro meses de tratamiento. Resultados: La edad media de los niños que participaron en el estudio fue de 10 meses y la desviación estándar fue de 4,9. El resultado del cuestionario indicó una asociación entre la edad y la postura de los labios, reportada por los padres, con el uso de la placa de memoria palatina, y todos los niños menores de 10 meses mantuvieron el sello de los labios, según los padres, durante el uso de la placa de memoria palatina, así como entre la edad y la satisfacción con el servicio. Las madres de niños más pequeños estaban más satisfechas. Conclusión: Los resultados del estudio indican que hubo asociación entre la edad y la postura de los labios, reportada por los padres, con el uso de la placa, así como entre la edad y la satisfacción con el servicio, y sugieren que el tratamiento temprano con la placa de memoria palatina beneficia a los niños con trisomía 21. (AU)