Sirolimus-Loaded Intravitreal Implant for Effective Treatment of Experimental Uveitis.

Non-infectious uveitis, an ocular inflammatory condition that affects the iris, ciliary body, choroid, and adjacent tissues (retina, optic nerve, and vitreous), is an important cause of blindness worldwide. Sirolimus (SRL), a potent immunomodulatory drug, has shown promising results in the treatment of inflammatory ocular diseases. Despite this therapeutic potential, its clinical use is a major challenge due to low bioavailability and poor solubility. Poly(lactic-co-glycolic acid) (PLGA) is a biodegradable polymer commonly used for ophthalmic drug delivery due to its suitable characteristics such as biocompatibility, good mechanical properties, and improvement of the pharmacokinetic profile of the drug. In the present study, we investigated the effects of SRL-PLGA implant on experimental autoimmune uveitis in rabbits. Clinical and histopathological examinations were performed, followed by assessment of protein levels and determination of myeloperoxidase (MPO) and N-acetylglucosaminidase (NAG) activity in the aqueous humor/vitreous. As a result, treated eyes had decreased average inflammatory scores, protein significant decreases in treated eyes, assessed after 35 days. Histopathological examination showed less severe intraocular inflammation and decreased tissue damage in treated eyes. According to these results, the SRL-PLGA implant evaluated in this study was apparently safe, reducing inflammation in treated eyes, with an extended effect possibly associated with prolonged release of SRL in the posterior segment of the eye. Therefore, intravitreal SRL-PLGA implant could be a promising alternative for treatment of non-infectious uveitis.

Toxicity and in vivo release profile of sirolimus from implants into the vitreous of rabbits' eyes.

PURPOSE: To assess the in vivo release profile and the retinal toxicity of a poly (lactic-co-glycolic acid) (PLGA) sustained-release sirolimus (SRL) intravitreal implant in normal rabbit eyes. METHODS: PLGA intravitreal implants containing or not SRL were prepared, and the viability of ARPE-19 and hES-RPE human retinal cell lines was examined after 24 and 72 h of exposure to implants. New Zealand rabbits were randomly divided into two groups that received intravitreal implants containing or not SRL. At each time point (1-8 weeks), four animals from the SRL group were euthanized, the vitreous was collected, and drug concentration was calculated. Clinical evaluation of the eyes was performed weekly for 8 weeks after administration. Electroretinography (ERG) was recorded in other eight animals, four for each group, at baseline and at 24 h, 1, 4, 6, and 8 weeks after the injection. ERG was carried out using scotopic and photopic protocols. The safety of the implants was assessed using statistical analysis of the ERG parameters (a and b waves, a and b implicit time, B/A ratio, oscillatory potential, and Naka-Rushton analysis) comparing the functional integrity of the retina between the PLGA and SRL-PLGA groups. After the last electrophysiological assessment, the rabbits were euthanized and retinal histopathology was realized. RESULTS: After 24 and 72 h of incubation with PLGA or SRL-PLGA implants, ARPE-19 and hES-RPE cells showed viability over 70%. The maximum concentration of SRL (199.8 ng/mL) released from the device occurred within 4 weeks. No toxic effects of the implants or increase in the intraocular pressure was observed through clinical evaluation of the eye. ERG responses showed no significant difference between the eyes that received PLGA or SRL-PLGA implants at baseline and throughout the 8 weeks of follow-up. No remarkable difference in retinal histopathology was detected in rabbit eyes treated with PLGA or SRL-PLGA implants. CONCLUSIONS: Intravitreal PLGA or SRL-PLGA implants caused no significant reduction in cell viability and showed no evident toxic effect on the function or structure of the retina of the animals. SRL was released from PLGA implant after application in the vitreous of rabbits during 8 weeks.

Etoposide-Loaded Poly(Lactic-co-Glycolic Acid) Intravitreal Implants: In Vitro and In Vivo Evaluation.

Etoposide-loaded poly(lactic-co-glycolic acid) implants were developed for intravitreal application. Implants were prepared by a solvent-casting method and characterized in terms of content uniformity, morphology, drug-polymer interaction, stability, and sterility. In vitro drug release was investigated and the implant degradation was monitored by the percent of mass loss. Implants were inserted into the vitreous cavity of rabbits' eye and the in vivo etoposide release profile was determined. Clinical examination and the Hen Egg Test-Chorioallantoic Membrane (HET-CAM) method were performed to evaluate the implant tolerance. The original chemical structure of the etoposide was preserved after incorporation in the polymeric matrix, which the drug was dispersed uniformly. In vitro, implants promoted sustained release of the drug and approximately 57% of the etoposide was released in 50 days. In vivo, devices released approximately 63% of the loaded drug in 42 days. Ophthalmic examination and HET-CAM assay revealed no evidence of toxic effects of implants. These results tend to show that etoposide-loaded implants could be potentially useful as an intraocular etoposide delivery system in the future.

Ocular safety of Intravitreal Clindamycin Hydrochloride Released by PLGA Implants.

BACKGROUND: Drug ocular toxicity is a field that requires attention. Clindamycin has been injected intravitreally to treat ocular toxoplasmosis, the most common cause of eye posterior segment infection worldwide. However, little is known about the toxicity of clindamycin to ocular tissues. We have previously showed non intraocular toxicity in rabbit eyes of poly(lactic-co-glycolic acid) (PLGA) implants containing clindamycin hydrochloride (CLH) using only clinical macroscotopic observation. In this study, we investigated the in vivo biocompatibility of CLH-PLGA implants at microscotopic, cellular and molecular levels. METHODS: Morphology of ARPE-19 and MIO-M1 human retinal cell lines was examined after 72 h exposure to CLH-PLGA implant. Drug delivery system was also implanted in the vitreous of rat eyes, retinal morphology was evaluated in vivo and ex vivo. Morphology of photoreceptors and inflammation was assessed using immunofluorescence and real-time PCR. RESULTS: After 72 h incubation with CLH-PLGA implant, ARPE-19 and MIO-M1 cells preserved the actin filament network and cell morphology. Rat retinas displayed normal lamination structure at 30 days after CLH-PLGA implantation. There was no apoptotic cell and no loss in neuron cells. Cones and rods maintained their normal structure. Microglia/macrophages remained inactive. CLH-PLGA implantation did not induce gene expression of cytokines (IL-1ß, TNF-α, IL-6), VEGF, and iNOS at day 30. CONCLUSION: These results demonstrated the safety of the implant and highlight this device as a therapeutic alternative for the treatment of ocular toxoplasmosis.

Montmorillonite clay based polyurethane nanocomposite as substrate for retinal pigment epithelial cell growth.

The subretinal transplantation of retinal pigment epithelial cells (RPE cells) grown on polymeric supports may have interest in retinal diseases affecting RPE cells. In this study, montmorillonite based polyurethane nanocomposite (PU-NC) was investigated as substrate for human RPE cell growth (ARPE-19 cells). The ARPE-19 cells were seeded on the PU-NC, and cell viability, proliferation and differentiation were investigated. The results indicated that ARPE-19 cells attached, proliferated onto the PU-NC, and expressed occludin. The in vivo ocular biocompatibility of the PU-NC was assessed by using the HET-CAM; and through its implantation under the retina. The direct application of the nanocomposite onto the CAM did not compromise the vascular tissue in the CAM surface, suggesting no ocular irritancy of the PU-NC film. The nanocomposite did not elicit any inflammatory response when implanted into the eye of rats. The PU-NC may have potential application as a substrate for RPE cell transplantation.

Development and evaluation of sustained-release etoposide-loaded poly(ε-caprolactone) implants.

Poly(ε-caprolactone) implants containing etoposide, an important chemotherapeutic agent and topoisomerase II inhibitor, were fabricated by a melt method and characterized in terms of content uniformity, morphology, drug physical state, and sterility. In vitro and in vivo drug release from the implants was also evaluated. The cytotoxic activity of implants against HeLa cells was studied. The short-term tolerance of the implants was investigated after subcutaneous implantation in mice. The original chemical structure of etoposide was preserved after incorporation into the polymeric matrix, in which the drug was dispersed uniformly. Etoposide was present in crystalline form in the polymeric implant. In vitro release study showed prolonged and controlled release of etoposide, which showed cytotoxicity activity against HeLa cells. After implantation, good correlation between in vitro and in vivo drug release was found. The implants demonstrated good short-term tolerance in mice. These results tend to show that etoposide-loaded implants could be potentially applied as a local etoposide delivery system.

Surface functionalized mesoporous silica nanoparticles for intravitreal application of tacrolimus.

Tacrolimus (TAC), a potent immunosuppressive macrolide, has been investigated for ocular diseases due to promising results in the treatment of anterior and posterior segments eye diseases. Mesoporous and functionalized silica nanoparticles show potential as TAC delivery platforms owing to their interesting characteristic as large surface area, uniform pore size distribution, high pore volume, and excellent biocompatibility. The purpose of this study was to incorporate TAC in functionalized silica nanoparticles with 3-aminopropyltriethoxysilane (MSNAPTES) and investigate the safety and biocompatibility of the systems. The MSNAPTES and MSNAPTES TAC nanoparticles were characterized. The in vitro cytotoxicity of MSNAPTES and MSNAPTES load with TAC (MSNAPTES-TAC) in retinal pigment epithelial cells (ARPE-19) was determined, chorioallantoic membrane (CAM) assay model was used to investigate the in vivo biocompatibility, and safety of intravitreal injection was evaluated using clinical examination (assessment of intraocular pressure and indirect fundus ophthalmoscopy), electroretinographic (ERG) and histologic studies in rats' eyes. The elemental analysis (CHN), thermogravimetric (TGA), photon correlation spectroscopy and Fourier transform infrared (FTIR) analysis confirmed the presence of functionalized agent and TAC in the MSNAPTES nanoparticles. TAC loading was estimated at 7% for the MSNAPTES TAC nanoparticles. MSNAPTES and MSNAPTES TAC did not present in vitro cytotoxicity. The drug delivery systems showed good biocompatibility on CAM. No retinal abnormalities, vitreous hemorrhage, neovascularization, retinal detachment, and optic nerve atrophy were observed during the in vivo study. Follow-up ERGs showed no changes in the function of the retina cells after 15 days of intravitreal injection, and histopathologic observations support these findings. In conclusion, MSNAPTES TAC was successfully synthesized, and physicochemical analyses confirmed the presence of TAC in the nanoparticles. In vitro and in vivo studies indicated that MSNAPTES TAC was safe to intravitreal administration. Taking into account the enormous potential of MSNAPTES to carry TAC, this platform could be a promising strategy for TAC ocular drug delivery in the treatment of eye diseases.

Dexamethasone-loaded poly(epsilon-caprolactone) intravitreal implants: a pilot study.

PURPOSE: Poly(epsilon-caprolactone) (PCL) is a biodegradable and biocompatible polymer that presents a very low degradation rate, making it suitable for the development of long-term drug delivery systems. The objective of this pilot study is to evaluate the feasibility and characteristics of PCL devices in the prolonged and controlled intravitreous release of dexamethasone. METHODS: The in vitro release of dexamethasone was investigated and the implant degradation was monitored by the percent of mass loss and by changes in the surface morphology. Differential scanning calorimetry was used to evaluate stability and interaction of the implant and the drug. The short-term tolerance of the implants was studied after intravitreous implantation in rabbit eye. RESULTS: PCL implant allows for a controlled and prolonged delivery of dexamethasone since it releases 25% of the drug in 21 weeks. Its low degradation rate was confirmed by the mass loss and scanning electron microscopy studies. Preliminary observations show that PCL intravitreous implants are very well tolerated in the rabbit eye. CONCLUSION: This study demonstrates the PCL drug delivery systems allowed to a prolonged release of dexamethasone in vitro. The implants demonstrated a strikingly good intraocular short-term tolerance in rabbits eyes. The in vitro and preliminary in vivo studies tend to show that PCL implants could be of interest when long-term sustained intraocular delivery of corticosteroids is required.

Intravitreal injection of polysorbate 80: a functional and morphological study.

OBJECTIVE: to determine the functional and morphological effects at rabbits retina of PS80 concentration used in the preparation of intravitreal drugs. METHODS: eleven New Zealand rabbits received a intravitreal injection of 0.1ml of PS80. As control, the contralateral eye of each rabbit received the same volume of saline. Electroretinography was performed according to a modified protocol, as well as biomicroscopy and retina mapping before injection and seven and ten days after. Animals were euthanized in the 30th day and the retinas were analyzed by light microscopy. RESULTS: eyes injected with PS80 did not present clinical signs of intraocular inflammation. Electroretinography did not show any alteration of extent and implicit time of a and b waves at scotopic and photopic conditions. There were no morphological alterations of retinas at light microscopy. CONCLUSION: intravitreal injection of PS80 in the used concentration for intravitreal drug preparations do not cause any functional or morphological alterations of rabbit retinas. These results suggest that PS80 is not toxic to rabbit retinas and may be safely used in the preparation of new lipophilic drugs for intravitreal injection.

Development of thalidomide-loaded biodegradable devices and evaluation of the effect on inhibition of inflammation and angiogenesis after subcutaneous application.

PURPOSE: To develop thalidomide-loaded poly-lactide-co-glycolide implants and evaluate its in vivo release and biological activity against inflammation and angiogenesis after subcutaneous administration. METHODS: Implants were prepared by the hot molding technique and characterized using stereomicroscopy, thermal analysis and X-ray diffraction. Swiss mice, divided in groups 1-3, received a subcutaneous implant containing 25% (w/w), 50% (w/w) or 75% (w/w) of thalidomide, respectively (n=6). The drug levels were determined during a 28-day study period. The toxicity associated with the implants was evaluated by light microscopy. The potential of the developed implant in the inhibition of inflammation and angiogenesis was evaluated in vivo using the sponge model. RESULTS: Thalidomide implant was developed and its characterization proved the stability of the drug and the polymer during preparation. Release profiles in vivo demonstrated an extended release of thalidomide from the implants during the 28 days. Histological evaluation did not show any sign of intense local inflammatory response to the presence of the implants in the subcutaneous pouch. The thalidomide implant reduced the number of vessels and N-acetyl-b-glucosaminidase (NAG) in vivo. CONCLUSION: The biodegradable implants delivered safe doses of thalidomide that were also effective to induce angiogenesis and inflammation regression.

Tissue response evaluation of the mucosa of the tympanic cavity of guinea pigs, when receiving biodegradable implant.

PURPOSE: To evaluate the tissue response of the mucosa of the tympanic cavity of guinea pigs, when receiving biodegradable implant. METHODS: A total of 20 male guinea pigs were divided into 2 groups. After paracentesis in both ears, a biodegradable polymer of poly lactic-co-glycolic acid was implanted in only one middle ear. Histological analysis using neutrophil exudate and vascular neoformation (acute inflammation) and fibroblast proliferation and mononuclear inflammatory cells (chronic inflammation) as parameters was performed after 10 and 30 days of survival (groups 1 and 2, respectively). RESULTS: Four ears in group 1 and 7 in group 2 had an increase of neutrophil exudate. Vascular neoformation occurred in ears with or without the implant, in both groups. Fibroblast proliferation and mononuclear inflammatory cells (lymphocytes and macrophages) increased in ears with implant in group 2. CONCLUSION: The tissue response by histological analysis of the mucosa of the tympanic cavity of guinea pigs, when receiving biodegradable implant, showed no statistically significant difference between ears with or without the implant.

Efficacy of methotrexate-loaded poly(ε-caprolactone) implants in Ehrlich solid tumor-bearing mice.

CONTEXT: Methotrexate (MTX) is used in the treatment of malignancies; however, its clinical application is limited by its toxic dose-related side effects. An alternative to overcome the toxicity of the MTX in healthy tissues is the design of an implantable device capable of controlling the delivery of this drug for an extended period within the tumor site. OBJECTIVE: To develop methotrexate-loaded poly(ε-caprolactone) implants (MTX PCL implants) and to demonstrate their efficacy as local drug delivery systems capable of inhibiting Ehrlich solid tumor bearing mice. MATERIALS AND METHODS: MTX PCL implants were produced by the melt-molding technique and were characterized by FTIR, WAXS, DSC and SEM. The in vitro and in vivo release of MTX from the PCL implants was also evaluated. The efficacy of implants in inhibiting tumor cells in culture and the solid tumor in a murine model was revealed. RESULTS AND DISCUSSION: The chemical and morphological integrity of the drug was preserved into the polymeric matrix. The in vitro and in vivo release processes of the MTX from the PCL implants were modulated by diffusion. MTX diffused from the implants revealed an antiproliferative effect on tumor cells. Finally, MTX controlled and sustained released from the polymeric implants efficiently reduced 42.7% of the solid tumor in mice paw. CONCLUSION: These implantable devices represented a contribution to improve the efficacy and safety of chemotherapy treatments, promoting long-term local drug accumulation in the targeted site.

Poly-epsilon-caprolactone intravitreous devices: an in vivo study.

PURPOSE: The objective of this study was to evaluate the long-term safety and pharmacokinetic profile of a dexamethasone-loaded poly-epsilon-caprolactone (PCL) intravitreous implant. METHODS: The PCL devices were prepared by compression and were inserted into the vitreous of pigmented rabbits. At different time points, vitreous samples were retrieved, and dexamethasone concentration was analyzed by high-performance liquid chromatography. The biodegradation of the implants was evaluated by scanning electron microscopy, and the dexamethasone remaining was evaluated at the end of follow-up. Clinical and histologic examinations were performed to evaluate the implant's tolerance. RESULTS: The PCL implant allows for a controlled and prolonged delivery of dexamethasone in rabbits eyes since it released the drug within the therapeutic range for at least 55 weeks. At 55 weeks approximately 79% of the drug was still present in the implant. Biodegradation study showed that PCL implants degradation is very slow. Clinical and histologic observations showed that the devices were very well tolerated in the rabbit eye. CONCLUSIONS: This study demonstrates the feasibility and tolerance of intravitreous PCL drug delivery systems, which can offer a wide range of applications for intraocular drug delivery because of their controlled and prolonged release over months or even years.

Tissue response evaluation of the mucosa of the tympanic cavity of guinea pigs, when receiving biodegradable implant

PURPOSE: To evaluate the tissue response of the mucosa of the tympanic cavity of guinea pigs, when receiving biodegradable implant. METHODS: A total of 20 male guinea pigs were divided into 2 groups. After paracentesis in both ears, a biodegradable polymer of poly lactic-co-glycolic acid was implanted in only one middle ear. Histological analysis using neutrophil exudate and vascular neoformation (acute inflammation) and fibroblast proliferation and mononuclear inflammatory cells (chronic inflammation) as parameters was performed after 10 and 30 days of survival (groups 1 and 2, respectively). RESULTS: Four ears in group 1 and 7 in group 2 had an increase of neutrophil exudate. Vascular neoformation occurred in ears with or without the implant, in both groups. Fibroblast proliferation and mononuclear inflammatory cells (lymphocytes and macrophages) increased in ears with implant in group 2. CONCLUSION: The tissue response by histological analysis of the mucosa of the tympanic cavity of guinea pigs, when receiving biodegradable implant, showed no statistically significant difference between ears with or without the implant. .

Sistema de liberação contendo ciclosporina para o tratamento de ceratoconjuntivite seca: estudo preliminar / Cyclosporine-loaded delivery system for the treatment of keratoconjunctivitis sicca: a pilot study

Objetivo: Este trabalho objetivou o desenvolvimento de um sistema mucoadesivo de liberação de ciclosporina A (CsA) para o tratamento de ceratoconjuntivite seca (CCS). Métodos: O sistema mucoadesivo foi preparado na forma de filme utilizando o polímero quitosana e CsA (25%p/v). Foram administrados no saco conjuntival do olho direito de coelhos normais (n=6) e a aferição da produção de lágrimas foi realizada diariamente antes e após a aplicação, de forma bilateral, durante sete dias, por meio do teste lacrimal de Schirmer. Avaliação oftalmológica foi realizada diariamente durante todo o estudo e seguido da análise histológica. Resultados: Os valores médios de produção de lágrimas foram alterados de 9,88 ± 0,37 mm/min para 16,02 ± 0,38 mm/min antes e após a administração do sistema respectivamente, significando um aumento de aproximadamente 60%. Todos os coelhos apresentaram hiperemia da conjuntiva palpebral e lacrimejamento. A hiperemia permaneceu durante 48 h após administração dos sistemas com resolução espontânea e o lacrimejamento foi diagnosticado até o final do experimento. Não foram observados outros sinais de reações indesejáveis. Nenhuma alteração histológica foi observada na mucosa conjuntival bulbar e palpebral à histopatologia. Conclusão: Os sistemas desenvolvidos são aparentemente seguros e eficientes criando expectativa para o tratamento da CCS. Novos estudos são necessários para avaliar a concentração de CsA liberada, assim como aceitabilidade e toxicidade dos sistemas em tratamentos mais prolongados.

Purpose: The present work aimed to present the development of a conjunctival mucosa system for the controlled delivery of cyclosporine A (CsA) in the treatment of keratoconjunctivitis sicca (KCS). Methods: The conjunctival mucosa system was prepared in the form of films containing chitosan as the polymer and CsA as the drug (25%w/v). The films were applied to the conjunctival sac of one eye from normal rabbits (n=6), and the evaluation of lachrymal production was performed daily, before and after application, for seven days. Clinical examination was executed daily on the eyes of each animal during the entire period of study. Histological analyses were carried out at the end of the study. Results: The average amount of lachrymal production changed from 9.88 ± 0.37 mm/min to 16.02 ± 0.38 mm/min, respectively, before and after applying the systems, which indicates an increase of approximately 60%. All rabbits presented hyperemia in the palpebral conjunctiva and tearing. Hyperemia continued for 48h after the application of the systems with spontaneous resolution, and tearing was diagnosed throughout the entire study. No other sign of undesirable reactions could be observed. Moreover, no histological changes could be identified in the bulbar and palpebral conjunctival mucosa. Conclusion: The developed systems proved to be safe and efficient in this pilot study and present a promising future for the treatment of KCS. Other studies are warranted to evaluate the released concentration of CsA as well as the feasibility and toxicity of these systems in a more prolonged treatment.

Formas farmacêuticas poliméricas para a administração de peptídeos e proteínas terapêuticos / Polymeric delivery systems for the administration of therapeutic peptides and proteins

A utilização terapêutica de peptídeos e proteínas é de grande importância para o tratamento de várias doenças. Entretanto, essas macromoléculas, devido às características intrínsecas, muitas vezes não alcançam o local de ação necessário para exercerem sua atividade. Neste contexto, este artigo de revisão apresenta os principais sistemas poliméricos de liberação em estudo atualmente, tais como micro e nanopartículas poliméricas e hidrogéis, que podem melhorar a efetividade do tratamento de doenças que requerem a administração de peptídeos e proteínas. O artigo, também, cita possíveis modificações químicas, tais como a peguilação, que também podem oferecer vantagens para o uso dessas macromoléculas como entidades terapêuticas.

The therapeutic application of peptides and proteins is of great importance for the treatment of numerous diseases. However, due to intrinsic properties of these macromolecules, they sometimes fail to reach the site of action required to promote their therapeutic effect. In this context, this review presents the main drug delivery systems under study nowadays, such as polymeric micro and nanoparticles and hydrogels, that can improve the effectiveness of the treatment of diseases that require the administration of peptides and proteins. The article also describes possible chemical modifications, such as pegylation, that can offer advantages for the use of these macromolecules as therapeutic agents.

Avaliação da mucosa sinusal do coelho à presença de implante biodegradável / Assessing the maxillary sinus mucosa of rabbits in the presence of biodegradable implants

Pensando em melhorar a qualidade de vida dos pacientes com doenças do humor vítreo, os oftalmologistas começaram a utilizar recentemente implantes biodegradáveis com corticoide. Estes mesmos implantes podem ser uma alternativa no tratamento da RSC e, para isso, realizamos um estudo experimental em seios maxilares de coelhos. OBJETIVO: Avaliar histologicamente a mucosa de seio maxilar de coelhos após a colocação de implante biodegradável de prednisolona. MÉTODO: Dezoito coelhos foram divididos aleatoriamente em dois grupos: Grupo 1: no seio maxilar esquerdo foi inserido um implante biodegradável com prednisolona; Grupo 2: No seio maxilar esquerdo foi inserido um implante biodegradável sem medicação. Os seios maxilares do lado direito serviram como controle. Após 7, 14 e 28 dias foram escolhidos aleatoriamente três coelhos de cada grupo e a resposta tecidual inflamatória foi avaliada. RESULTADOS: Foi encontrada diferença não significativa de inflamação na mucosa, quando comparamos o grupo de coelhos que receberam implantes com e sem medicação com o grupo controle; ou quando comparamos o grupo que recebeu implante com prednisolona com o grupo que recebeu implante sem medicação. CONCLUSÃO: Não foram observados sinais de toxicidade ou inflamação na mucosa do seio maxilar do coelho à presença do implante com ou sem prednisolona.

In an attempt to improve the quality of life of patients with vitreous humor disease, ophthalmologists began offering steroid-eluting biodegradable implants to their patients. These implants can be used as an alternative treatment for CRS and this is why this experimental study was carried out on rabbit maxillary sinuses. OBJECTIVE: This study aims to assess the histology of the mucosa of the maxillary sinuses of rabbits after the placement of a prednisolone-eluting biodegradable implant. METHOD: Eighteen rabbits were randomly divided into two groups: group 1 - subjects had drug-eluting implants placed on their left maxillary sinuses; group 2 - subjects had non-drug-eluting implants placed on their left maxillary sinuses. The right maxillary sinuses served as the controls. After seven, 14, and 28 days three rabbits in each group were randomly picked to have their tissue inflammatory response assessed. RESULTS: Levels of mucosal inflammation were not significantly different between the groups with and without drug-eluting implants and the control group, or when the groups with drug-eluting implants and non-drug-eluting implants were compared. CONCLUSION: Signs of toxicity or mucosal inflammation were not observed in the maxillary sinuses of rabbits given prednisolone-eluting implants or non-drug-eluting implants.

Implants as drug delivery devices for the treatment of eye diseases / Implantes como dispositivos de distribuição de medicamentos para o tratamento de doenças oculares

The treatment of diseases affecting the posterior segment of the eye is limited by the difficulty in transporting effective doses of drugs to the vitreous, retina, and choroid. Topically applied drugs are poorly absorbed due to the low permeability of the external ocular tissues and tearing. The blood-retina barrier limits drug diffusion from the systemic blood to the posterior segment, thus high doses of drug are needed to maintain therapeutic levels. In addition, systemic side effects are common. Intraocular injections could be an alternative, but the fast flowing blood supply in this region, associated with rapid clearance rates, causes drug concentration to quickly fall below therapeutic levels. To obtain therapeutic levels over longer time periods, polymeric sustained-drug release systems implanted within the vitreous are being studied for the treatment of vitreoretinal disorders. These systems are prepared using different kinds of biodegradable or non-biodegradable polymers. This review aims to demonstrate the main characteristics of these drug delivery implants and their potential for clinical application.

O tratamento de doenças do segmento posterior do olho é limitado pela dificuldade no transporte de doses efetivas de fármacos para o vítreo, retina e coróide. Os fármacos aplicados topicamente são pouco absorvidos por causa da baixa permeabilidade dos tecidos oculares externos e ao lacrimejamento. Embora a administração sistêmica seja capaz de transportar fármacos para o segmento posterior do olho, as barreiras hemato-aquosa e hematorretiniana dificultam a absorção e, normalmente, são necessárias doses elevadas, as quais estão geralmente associadas a potenciais efeitos adversos. Injeções intravitreais são capazes de transportar fármacos para o segmento posterior do olho, mas é uma técnica invasiva, pouco tolerada pelos pacientes e apresenta riscos de infecções oculares e danos aos tecidos. Visando a obtenção de níveis terapêuticos adequados de fármacos no segmento posterior do bulbo do olho por longos períodos, sistemas de liberação poliméricos implantados diretamente no vítreo estão sendo investigados para o tratamento de várias doenças vítreo-retinianas. Esses implantes podem ser preparados a partir de diferentes polímeros biocompatíveis, biodegradáveis ou não-biodegradáveis. Nesta revisão, as principais características destes implantes transportadores de fármacos são descritas, expondo suas potencialidades de aplicação clínica.