3D-printed microgels supplemented with dentin matrix molecules as a novel biomaterial for direct pulp capping.

OBJECTIVES: To develop a 3D-printed, microparticulate hydrogel supplemented with dentin matrix molecules (DMM) as a novel regenerative strategy for dental pulp capping. MATERIALS AND METHODS: Gelatin methacryloyl microgels (7% w/v) mixed with varying concentrations of DMM were printed using a digital light projection 3D printer and lyophilized for 2 days. The release profile of the DMM-loaded microgels was measured using a bicinchoninic acid assay. Next, dental pulp exposure defects were created in maxillary first molars of Wistar rats. The exposures were randomly capped with (1) inert material - negative control, (2) microgels, (3) microgels + DMM 500 µg/ml, (4) microgels + DMM 1000 µg/ml, (5) microgels + platelet-derived growth factor (PDGF 10 ng/ml), or (6) MTA (n = 15/group). After 4 weeks, animals were euthanized, and treated molars were harvested and then processed to evaluate hard tissue deposition, pulp tissue organization, and blood vessel density. RESULTS: All the specimens from groups treated with microgel + 500 µg/ml, microgel + 1000 µg/ml, microgel + PDGF, and MTA showed the formation of organized pulp tissue, tertiary dentin, newly formed tubular and atubular dentin, and new blood vessel formation. Dentin bridge formation was greater and pulp necrosis was less in the microgel + DMM groups compared to MTA. CONCLUSIONS: The 3D-printed photocurable microgels doped with DMM exhibited favorable cellular and inflammatory pulp responses, and significantly more tertiary dentin deposition. CLINICAL RELEVANCE: 3D-printed microgel with DMM is a promising biomaterial for dentin and dental pulp regeneration in pulp capping procedures.

The effects of photodynamic therapy with blue light and papain-based gel associated with Urucum, on collagen and fibroblasts: a spectroscopic and cytotoxicity analysis.

Papacarie Duo™ is clinically used and has proven effectiveness; however, it is necessary to improve its antimicrobial action. The combined treatment of Papacarie Duo™ with Urucum (Bixa Orellana) could create a potential tool for dental caries treatment; its extract obtained from the seeds' pericarp contains a water-soluble primary pigment (cis-bixin) with smaller amounts of other carotenoids. The dicarboxylic acid salts of cis-norbixin and trans-norbixin occur in heated alkaline solutions. To analyze the absorption spectra and cytotoxicity (with human dermal fibroblasts) in different concentrations of Urucum, associated or not with Papacarie Duo™, we performed this in vitro study. The effects of pure Urucum, Papacarie Duo™, and PapaUrucum™ on the microstructure of collagen were also analyzed. The application of papain-based gel with Urucum did not present cytotoxicity, its exhibit UV absorption spectrum peak around 460 ± 20 nm. Also, it showed that the compound used did not alter the chemical structure of collagen. Consequently, this product could be used as a chemomechanical method to remove dentin caries as well as being a potential product for antimicrobial photodynamic therapy (aPDT) application.

Production of extracellular matrix proteins by human pulp fibroblasts in contact with papacárie and carisolv.

PURPOSE: To evaluate the effect of two products for the chemomecanical removal of carious tissue (Papacárie and Carisolv) on human dental pulp fibroblasts and the synthesis of extracellular matrix proteins. MATERIALS AND METHODS: Fibroblasts were divided into three groups: group 1 (control), group 2 (Papacárie) and group 3 (Carisolv). Collagen I, III , fibronectin and osteonectin were analysed by immunofluorescence and compared among the groups. RESULTS: The groups exhibited similar immunolabeling for vimentin, type I collagen and fibronectin, but were negative for type III collagen. Osteonectin staining was strongly positive in the cells treated with Papacárie and Carisolv and weakly positive in the control group. CONCLUSION: The findings of the present study showed that Papacárie and Carisolv are not cytotoxic to pulp fibroblast cells. Moreover, these products stimulate fibroblasts to produce osteonectin, likely leading to the formation of dentin matrix. These findings confirm the safe, beneficial use of both gels in minimally invasive techniques.

Fully automated algorithm for wound surface area assessment.

Worldwide, clinicians, dentists, nurses, researchers, and other health professionals need to monitor the wound healing progress and to quantify the rate of wound closure. The aim of this study is to demonstrate, step by step, a fully automated numerical method to estimate the size of the wound and the percentage damaged relative to the body surface area (BSA) in images, without the requirement for human intervention. We included the formula for BSA in rats in the algorithm. The methodology was validated in experimental wounds and human ulcers and was compared with the analysis of an experienced pathologist, with good agreement. Therefore, this algorithm is suitable for experimental wounds and burns and human ulcers, as they have a high contrast with adjacent normal skin.

High-Throughput Bioprinting of Geometrically-Controlled Pre-Vascularized Injectable Microgels for Accelerated Tissue Regeneration.

Successful integration of cell-laden tissue constructs with host vasculature depends on the presence of functional capillaries to provide oxygen and nutrients to the embedded cells. However, diffusion limitations of cell-laden biomaterials challenge regeneration of large tissue defects that require bulk-delivery of hydrogels and cells. Herein, a strategy to bioprint geometrically controlled, endothelial and stem-cell laden microgels in high-throughput is introduced, allowing these cells to form mature and functional pericyte-supported vascular capillaries in vitro, and then injecting these pre-vascularized constructs minimally invasively in-vivo. It is demonstrated that this approach offers both desired scalability for translational applications as well as unprecedented levels of control over multiple microgel parameters to design spatially-tailored microenvironments for better scaffold functionality and vasculature formation. As a proof-of-concept, the regenerative capacity of the bioprinted pre-vascularized microgels is compared with that of cell-laden monolithic hydrogels of the same cellular and matrix composition in hard-to-heal defects in vivo. The results demonstrate that the bioprinted microgels have faster and higher connective tissue formation, more vessels per area, and widespread presence of functional chimeric (human and murine) vascular capillaries across regenerated sites. The proposed strategy, therefore, addresses a significant issue in regenerative medicine, demonstrating a superior potential to facilitate translational regenerative efforts.

[Atraumatic restorative treatment: a dental alternative well-received by children]. / La práctica restaurativa atraumática: una alternativa dental bien recibida por los niños.

The purpose of this study is to compare atraumatic restorative treatment (ART) with the conventional rotational restorative method (CM) to determine in both cases the total time required for the procedure, the cost, the presence of pain, and the behavior of pediatric patients in Peru. Of the 30 children selected for the study, half received ART and restoration with glass ionomer cement and the other half, CM and restoration with amalgam. The study parameters were the times required to remove the decayed tissue and to complete the entire procedure, the total cost of the procedure, the presence of pain, and the patient's behavior during treatment. Significant differences were found between the two techniques in all parameters, except for the patient's behavior. Although removing the decayed tissue was faster with the CM, the entire procedure was faster with ART, which, moreover, was significantly less expensive and less painful than the CM. The results indicated that ART is a very good alternative due to its low cost and acceptance by the children.

In-vitro models of biocompatibility testing for restorative dental materials: From 2D cultures to organs on-a-chip.

Dental caries is a biofilm-mediated, diet-modulated, multifactorial and dynamic disease that affects more than 90% of adults in Western countries. The current treatment for decayed tissue is based on using materials to replace the lost enamel or dentin. More than 500 million dental restorations are placed annually worldwide, and materials used for these purposes either directly or indirectly interact with dentin and pulp tissues. The development and understanding of the effects of restorative dental materials are based on different in-vitro and in-vivo tests, which have been evolving with time. In this review, we first discuss the characteristics of the tooth and the dentin-pulp interface that are unique for materials testing. Subsequently, we discuss frequently used in-vitro tests to evaluate the biocompatibility of dental materials commonly used for restorative procedures. Finally, we present our perspective on the future directions for biological research on dental materials using tissue engineering and organs on-a-chip approaches. STATEMENT OF SIGNIFICANCE: Dental caries is still the most prevalent infectious disease globally, requiring more than 500 million restorations to be placed every year. Regrettably, the failure rates of such restorations are still high. Those rates are partially based on the fact that current platforms to test dental materials are somewhat inaccurate in reproducing critical components of the complex oral microenvironment. Thus, there is a collective effort to develop new materials while evolving the platforms to test them. In this context, the present review critically discusses in-vitro models used to evaluate the biocompatibility of restorative dental materials and brings a perspective on future directions for tissue-engineered and organs-on-a-chip platforms for testing new dental materials.

Engineering pericyte-supported microvascular capillaries in cell-laden hydrogels using stem cells from the bone marrow, dental pulp and dental apical papilla.

Engineered tissue constructs require the fabrication of highly perfusable and mature vascular networks for effective repair and regeneration. In tissue engineering, stem cells are widely employed to create mature vascularized tissues in vitro. Pericytes are key to the maturity of these vascular networks, and therefore the ability of stem cells to differentiate into pericyte-like lineages should be understood. To date, there is limited information regarding the ability of stem cells from the different tissue sources to differentiate into pericytes and form microvascular capillaries in vitro. Therefore, here we tested the ability of the stem cells derived from bone marrow (BMSC), dental pulp (DPSC) and dental apical papilla (SCAP) to engineer pericyte-supported vascular capillaries when encapsulated along with human umbilical vein endothelial cells (HUVECs) in gelatin methacrylate (GelMA) hydrogel. Our results show that the pericyte differentiation capacity of BMSC was greater with high expression of α-SMA and NG2 positive cells. DPSC had α-SMA positive cells but showed very few NG2 positive cells. Further, SCAP cells were positive for α-SMA while they completely lacked NG2 positive cells. We found the pericyte differentiation ability of these stem cells to be different, and this significantly affected the vasculogenic ability and quality of the vessel networks. In summary, we conclude that, among stem cells from different craniofacial regions, BMSCs appear more suitable for engineering of mature vascularized networks than DPSCs or SCAPs.

Synthesis of di- and triacrylamides with tertiary amine cores and their evaluation as monomers in dental adhesive interfaces.

PURPOSE/AIM: In an attempt to increase the service life of dental adhesive interfaces, more hydrolytically and enzymatically-stable methacrylate alternatives, such as methacrylamides, have been proposed. The aim of this study was to investigate polymerization behavior, as well as mechanical and biological properties of experimental adhesives containing multi-functional acrylamides. MATERIALS AND METHODS: Multi-functional acrylamides (N,N-Bis[(3-methylaminoacryl)propyl]methylamine - BMAAPMA, Tris[(2-methylaminoacryl)ethyl]amine - TMAAEA, N,N'-bis(acrylamido) 1,4-diazepane - BAADA, N,N-Diethyl-1,3-bis(acrylamido)propane - DEBAAP) or HEMA (2-Hydroxyethyl methacrylate - control) were added at 40 wt% to UDMA. 0.2 wt% DMPA and 0.4 wt% DPI-PF6 were used as initiators. Polymerization kinetics was followed in real-time in near-IR during photoactivation (320-500 nm, at 630 mW/cm2). Water sorption/solubility and flexural strength/modulus were measured according to ISO 4049. 1H NMR was used to assess monomer degradation kinetics. MTT assay was used to assess cytotoxicity against OD-21 and DPSC cells. Biofilm formation and adhesion were assessed by Luciferase Assay and Impingement technique, respectively. Solvated adhesives (40 vol% ethanol) were used to test interfacial adhesion strength. The results were analyzed by ANOVA/Tukey's test (α = 0.05). RESULTS: In general, the pure methacrylate mixture had higher rate of polymerization (Rpmax), degree of conversion (DC) at Rpmax, and final DC than the acrylamides. Flexural properties after water storage decreased between 11 and 65%, more markedly for acrylamides. Interfacial bond strength was greater and more stable long-term for the newly synthesized acrylamide formulations (less than 4% reduction at 6 months) compared to the methacrylate experimental control (42% reduction at 6 months). HEMA degraded by almost 90%, while the acrylamides showed no degradation in acidic conditions. Cytotoxicity and biofilm formation, in general, were similar for all groups. CONCLUSIONS: Despite demonstrating high water sorption, the acrylamide-containing materials had similar mechanical and biological properties and enhanced interfacial bond strength stability compared to the methacrylate control.

The tooth on-a-chip: a microphysiologic model system mimicking the biologic interface of the tooth with biomaterials.

The tooth has a unique configuration with respect to biomaterials that are used for its treatment. Cells inside of the dental pulp interface indirectly with biomaterials via a calcified permeable membrane, formed by the dentin matrix and several thousands of dentinal tubules (∼2 µm in diameter). Although the cytotoxic response of the dental pulp to biomaterials has been extensively studied, there is a shortage of in vitro model systems that mimic the dentin-pulp interface and enable an improved understanding of the morphologic, metabolic and functional influence of biomaterials on live dental pulp cells. To address this shortage, here we developed an organ-on-a-chip model system which integrates cells cultured directly on a dentin wall within a microfluidic device that replicates some of the architecture and dynamics of the dentin-pulp interface. The tooth-on-a-chip is made out of molded polydimethylsiloxane (PDMS) with a design consisting of two chambers separated by a dentin fragment. To characterize pulp cell responses to dental materials on-chip, stem cells from the apical papilla (SCAPs) were cultured in odontogenic medium and seeded onto the dentin surface, and observed using live-cell microscopy. Next, to evaluate the tooth-on-a-chip as a platform for materials testing, standard dental materials used clinically (2-hydroxyethylmethacrylate - HEMA, phosphoric acid - PA, and Adper-Scotchbond - SB) were tested for cytotoxicity, cell morphology, and metabolic activity on-chip, and compared against standardized off-chip controls. All dental materials had cytotoxic effects in both on-chip and off-chip systems in the following order: HEMA > SB > PA (p < 0.05), and cells presented consistently higher metabolic activity on-chip than off-chip (p < 0.05). Furthermore, the tooth-on-a-chip enabled real-time tracking of gelatinolytic activity in a model hybrid layer (HL) formed in the microdevice, which suggests that dental pulp cells may contribute to the proteolytic activity in the HL more than endogenous proteases. In conclusion, the tooth-on-a-chip is a novel platform that replicates near-physiologic conditions of the pulp-dentin interface and enables live-cell imaging to study dental pulp cell response to biomaterials.

Equivalence of human and bovine dentin matrix molecules for dental pulp regeneration: proteomic analysis and biological function.

OBJECTIVE: To compare proteomics and biological function of human dentin matrix molecules (hDMMs) and bovine dentin matrix molecules (bDMMs). DESIGN: Dentin powder from human or bovine teeth (n = 4) was demineralized in 10% (v/v) ethylenediaminetetraacetic acid for 7 days. The extracts were dialyzed, lyophilized and proteins were characterized using liquid chromatography-tandem mass spectrometry and shotgun proteomic analysis. To study biological function, mouse-derived undifferentiated dental pulp cells (OD21) were treated with 0.01, 0.1 or 1 µg/mL of hDMMs or bDMMs and proliferation was measured after 24 hours and 48 hours using 3-(4,5-Dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide (MTT) assay. Cell migration was assessed after 24 hours using a Boyden chamber. Alizarin Red S staining was used to evaluate mineral formation. RESULTS: There were 307 proteins identified, of which 93 proteins were common to both species. Gene Ontology functional analysis demonstrated similar pattern of biological process in both species which consisted mainly of tissue development and biomineralization. hDMMs and bDMMs both enhanced cell proliferation. After 24 hours, all concentrations of bDMMs promoted cell proliferation (p ≤ 0.05), while hDMMs did not affect proliferation. After 48 hours, groups with 1µg/mL of bDMMs and 0.01µg/mL of hDMMs had increased cell proliferation compared to control (p ≤ 0.0001). All concentrations of hDMMs and bDMMs enhanced cell migration and mineralization (p ≤ 0.0001). CONCLUSION: bDMMs has similar biological functions as hDMMs. Moreover, bDMMs stimulated cell proliferation, migration and differentiation similar to hDMMs.

3D Printing of Microgel-Loaded Modular Microcages as Instructive Scaffolds for Tissue Engineering.

Biomaterial scaffolds have served as the foundation of tissue engineering and regenerative medicine. However, scaffold systems are often difficult to scale in size or shape in order to fit defect-specific dimensions, and thus provide only limited spatiotemporal control of therapeutic delivery and host tissue responses. Here, a lithography-based 3D printing strategy is used to fabricate a novel miniaturized modular microcage scaffold system, which can be assembled and scaled manually with ease. Scalability is based on an intuitive concept of stacking modules, like conventional toy interlocking plastic blocks, allowing for literally thousands of potential geometric configurations, and without the need for specialized equipment. Moreover, the modular hollow-microcage design allows each unit to be loaded with biologic cargo of different compositions, thus enabling controllable and easy patterning of therapeutics within the material in 3D. In summary, the concept of miniaturized microcage designs with such straight-forward assembly and scalability, as well as controllable loading properties, is a flexible platform that can be extended to a wide range of materials for improved biological performance.

3D-Imaging of Whole Neuronal and Vascular Networks of the Human Dental Pulp via CLARITY and Light Sheet Microscopy.

Direct visualization of the spatial relationships of the dental pulp tissue at the whole-organ has remained challenging. CLARITY (Clear Lipid-exchanged Acrylamide Tissue hYdrogel) is a tissue clearing method that has enabled successful 3-dimensional (3D) imaging of intact tissues with high-resolution and preserved anatomic structures. We used CLARITY to study the whole human dental pulp with emphasis on the neurovascular components. Dental pulps from sound teeth were CLARITY-cleared, immunostained for PGP9.5 and CD31, as markers for peripheral neurons and blood vessels, respectively, and imaged with light sheet microscopy. Visualization of the whole dental pulp innervation and vasculature was achieved. Innervation comprised 40% of the dental pulp volume and the vasculature another 40%. Marked innervation morphological differences between uni- and multiradicular teeth were found, also distinct neurovascular interplays. Quantification of the neural and vascular structures distribution, diameter and area showed that blood vessels in the capillary size range was twice as high as that of nerve fibers. In conclusion whole CLARITY-cleared dental pulp samples revealed 3D-morphological neurovascular interactions that could not be visualized with standard microscopy. This represents an outstanding tool to study the molecular and structural intricacies of whole dental tissues in the context of disease and treatment methods.

Antibacterial, ester-free monomers: Polymerization kinetics, mechanical properties, biocompatibility and anti-biofilm activity.

OBJECTIVES: Quaternary ammonium (QA) methacrylate monomers have been extensively investigated and demonstrate excellent antibacterial properties. However, the presence of ester bonds makes them prone to degradation in the oral cavity. In this study, ester-free QA monomers based on meth-acrylamides were synthesized and screened for polymerization kinetics, mechanical properties and antibacterial effects. MATERIALS AND METHODS: Tertiary quaternary ammonium acrylamides (AM) and methacrylamides (MAM) with alkyl side chain lengths of 9 and 14 carbons (C9 and C14) were synthesized and incorporated at 10 wt% into experimental composites based on BisGMA:TEGDMA (1:1), camphorquinone/ethyl-4-dimethylaminobenzoate (0.2/0.8 wt%) and 70 wt% barium glass fillers. Analogous methacrylate versions (MA) were used as controls. Degree of conversion (DC) and rate of polymerization (RP) during photoactivation (800 mW/cm2) were followed in real-time with near-IR. Flexural Strength (FS) and Modulus (E) were measured on 2 × 2 × 25 mm bars in 3-point bending after 24 h dry storage and 7-day storage in water at 37 °C. Antimicrobial properties and biofilm adhesion (fouling) were evaluated by bioluminescence (Luciferase Assay) and biofilm removal by water spray microjet impingement test, respectively. Cytotoxicity was assessed by MTT assay on dental pulp stem cells (DPSC). Data were analyzed with one-way ANOVA/Tukey's test (α = 0.05). RESULTS: DC was similar for all groups tested (∼70%). Both MAMs and C14-AM presented significantly lower RP. Under dry conditions, FS (110-120 MPa) and E (8-9 GPa) were similar for all groups. After water storage, all materials presented FS/E similar to the control, except for C14-AM (for FS) and C14-MAM (for E), which were lower. All C14 versions were strongly antibacterial, decreasing the titer counts of biofilm by more than two orders of magnitude in comparison to the control. C9 monomers did not present significant antibacterial nor antifouling properties. And biofilms had approximately equivalent adhesion on the C9 composites as on the control. Cytotoxicity did not show significant differences between the MA and AM versions and the control group. CONCLUSIONS: C14-QA monomers based on methacrylates and meth-acrylamides present strong antibacterial properties, and in general, similar conversion/mechanical properties compared to the methacrylate control. STATEMENT OF SIGNIFICANCE: This work demonstrates the viability of methacrylamides and acrylamides as potential components in dental restorative materials with antimicrobial properties. The use of ester-free polymerizable functionalities has the potential of improving the degradation resistance of these materials long-term. The use of (meth)acrylamides did not interfere with the antimicrobial potential of quaternary ammonium-based materials.

Photopolymerization of cell-laden gelatin methacryloyl hydrogels using a dental curing light for regenerative dentistry.

Photopolymerized hydrogels, such as gelatin methacryloyl (GelMA), have desirable biological and mechanical characteristics for a range of tissue engineering applications. OBJECTIVE: This study aimed to optimize a new method to photopolymerize GelMA using a dental curing light (DL). METHODS: Lithium acylphosphinate photo-initiator (LAP, 0.05, 0.067, 0.1% w/v) was evaluated for its ability to polymerize GelMA hydrogel precursors (10% w/v) encapsulated with odontoblast-like cells (OD21). Different irradiances (1650, 2300 and 3700mW/cm2) and photo-curing times (5-20s) were tested, and compared against the parameters typically used in UV light photopolymerization (45mW/cm2, 0.1% w/v Irgacure 2959 as photoinitiator). Physical and mechanical properties of the photopolymerized GelMA hydrogels were determined. Cell viability was assessed using a live and dead assay kit. RESULTS: Comparing DL and UV polymerization methods, the DL method photopolymerized GelMA precursor faster and presented larger pore size than the UV polymerization method. The live and dead assay showed more than 80% of cells were viable when hydrogels were photopolymerized with the different DL irradiances. However, the cell viability decreased when the exposure time was increased to 20s using the 1650mW/cm2 intensity, and when the LAP concentration was increased from 0.05 to 0.1%. Both DL and UV photocrosslinked hydrogels supported a high percentage of cell viability and enabled fabrication of micropatterns using a photolithography microfabrication technique. SIGNIFICANCE: The proposed method to photopolymerize GelMA cell-laden hydrogels using a dental curing light is effective and represents an important step towards the establishment of chair-side procedures in regenerative dentistry.

A dentin-derived hydrogel bioink for 3D bioprinting of cell laden scaffolds for regenerative dentistry.

Recent studies in tissue engineering have adopted extracellular matrix (ECM) derived scaffolds as natural and cytocompatible microenvironments for tissue regeneration. The dentin matrix, specifically, has been shown to be associated with a host of soluble and insoluble signaling molecules that can promote odontogenesis. Here, we have developed a novel bioink, blending printable alginate (3% w/v) hydrogels with the soluble and insoluble fractions of the dentin matrix. We have optimized the printing parameters and the concentrations of the individual components of the bioink for print accuracy, cell viability and odontogenic potential. We find that, while viscosity, and hence printability of the bioinks, was greater in the formulations containing higher concentrations of alginate, a higher proportion of insoluble dentin matrix proteins significantly improved cell viability; where a 1:1 ratio of alginate and dentin (1:1 Alg-Dent) was most suitable. We further demonstrate high retention of the soluble dentin molecules within the 1:1 Alg-Dent hydrogel blends, evidencing renewed interactions between these molecules and the dentin matrix post crosslinking. Moreover, at concentrations of 100 µg ml-1, these soluble dentin molecules significantly enhanced odontogenic differentiation of stem cells from the apical papilla encapsulated in bioprinted hydrogels. In summary, the proposed novel bioinks have demonstrable cytocompatibility and natural odontogenic capacity, which can be a used to reproducibly fabricate scaffolds with complex three-dimensional microarchitectures for regenerative dentistry in the future.

Photodynamic therapy with Bixa orellana extract and LED for the reduction of halitosis: study protocol for a randomized, microbiological and clinical trial.

BACKGROUND: Halitosis is an unpleasant breath odour that can interfere with the professional life, social life and quality of life of people who suffer from it. A modality of treatment that has been increasing in dentistry is antimicrobial photodynamic therapy (aPDT). Bixa orellana, popularly known as "urucum" is a plant native to Brazil. The seeds are used to produce a dye that is largely used in the food, textile, paint and cosmetic industries. The aim of this study is to verify whether aPDT with Bixa orellana extract and blue light-emitting diodes (LEDs) is effective in reducing halitosis. This method will also be compared with tongue scraping, the most commonly used conventional method for tongue coating removal, and the association of both methods will be evaluated. METHODS/DESIGN: A randomized clinical trial will be conducted at the dental clinic of the Universidade Nove de Julho. Thirty-nine patients will be divided by block randomization into three groups (n = 13) according to the treatment to be performed. In Group 1, tongue scraping will be performed by the same operator in all patients for analysis of the immediate results. Patients will also be instructed on how to use the scraper at home. Group 2 will be treated with aPDT with Bixa orellana extract and the LED light curing device: Valo Cordless Ultradent®. Six points in the tongue dorsum with a distance of 1 cm between them will be irradiated. The apparatus will be pre-calibrated at wavelength 395-480 nm for 20 s and 9.6 J per point. In Group 3, patients will be submitted to the tongue scraping procedure, as well as to the previously explained aPDT. Oral air collection with the Oral Chroma™ and microbiological collections of the tongue coating shall be done before, immediately after and 7 days after treatment for comparison. DISCUSSION: Halitosis treatment is a topic that still needs attention. The results of this trial could support decision-making by clinicians regarding aPDT using blue LEDs for treating halitosis on a daily basis, as most dentists already have this light source in their offices. TRIAL REGISTRATION: ClinicalTrials.gov, NCT03346460 . Registered on 17 November 2017.

Effects of periodontitis on the development of asthma: The role of photodynamic therapy.

To evaluate whether periodontitis modulates lung inflammation in an experimental model of asthma as well as the photodynamic therapy (PDT) is associated with a reduction of lung inflammation. Seventy-two BALB/c male mice (~2 months) were randomly divided into 8 groups (n = 9): Basal, Periodontitis (P), P+PT, P+PT+PDT, Asthma (A), A+P, A+P+PT, and A+P+PT+PDT. Periodontitis was induced by using the ligature technique and asthma was induced by ovalbumin (OVA). PT was performed with curettes and PDT with methylene blue (0.005%), λ = 660nm, with a radiant exposure of 318J/cm2. After 43 days, euthanasia was carried out prior to lung and mandible morphological analyzes. All of the manipulations of the animals were performed by only one operator. The total and differential cell counts and cytokines IL-4, IL-5, IL-10, IFN-γ, TNF-α, IL-1ß, and IL-6 were evaluated in the bronchoalveolar lavage (BAL) and in the serum. Mucus and alkaline phosphatase were also quantified. Statistical analyzes were performed by a blinded statistician. One-way analysis of variance (ANOVA) was employed, followed by the Student-Newman-Keuls test. Periodontitis group (P) increased alkaline phosphatase and bone resorption (p<0.05), validating the experimental model of periodontitis. The A group and the P group increased the total amount of cells (p <0.05) in the BAL. However, in the A+P group, there was a decrease in these cells, except for in the A+P+PT+PDT group (p<0.05). The asthma group increased the Th2 cytokines and P group increased the Th1 cytokine profile, and A+P+PT+PDT group increased IL-10 cytokine. Mucus was increased for the A and P groups. In conclusion, periodontitis in the asthmatic mice reduced the inflammatory migrated cells in the BAL (eosinophils, lymphocytes, macrophages). In addition, it reduced the levels of the IL-4 and TNF-α cytokines, which was also accompanied by a decreased mucus production. After PDT treatment the total cell count increased however, this increase was not accompanied by a pro-inflammatory cytokines release. Only in PDT group the anti-inflammatory IL-10 was increased. Further studies are needed to understand this mechanism of action.

Dental abnormalities in children submitted to antineoplastic therapy.

PURPOSE: The purpose of this study was to assess, by panoramic radiographs, the prevalence of morphological dental changes in children with cancer who were submitted for chemotherapy alone or concomitant radiotherapy of the head and neck. METHODS: All patients admitted between March, 1996 and February, 2004 were analyzed and 137 were included in this retrospective, nonrandomized, institutional study. The rates of microdontia, taurodontia, anodontia, macrodontia, blunt root, and tapered root were assessed. RESULTS: The patients were distributed into 2 groups: (1) those with lymphoproliferative neoplasias (61%); and (2) those with solid tumors (39%). Their mean age when treatment began was 5 years and 6 months. Dental abnormalities were found in 39 (29%) patients, while 98 (72%) patients did not present any abnormality. The abnormalities found were: (1) microdontia (7%; N= 10); (2) anodontia (6%; N=8); (3) taurodontia (14%; N=19); (4) macrodontia (5%; N=7); (5) blunted root (2%; N=2); and (6) tapered root (4%; N=5). Of these patients: 22% (N=30) presented 1 abnormality; 4% (N=6) presented 2 abnormalities; and 2% (N=3) presented 3 abnormalities. CONCLUSION: Taurodontia was the most frequent abnormality found in children and adolescents who underwent antineoplastic treatment, and its rate was significantly higher than those found for the healthy Brazilian population. This study's results show that it is necessary for the odontologist to systematically research the dental changes that occur among this special group of patients.