Occlusal veneer restoration treatment outcomes of cracked tooth syndrome: A 22.4-month follow-up study.

OBJECTIVES: The aims of this clinical study were to investigate success rate, vital pulp survival rate, tooth survival rate and patient-reported masticatory ability by evaluating the pain symptoms and signs of the cracked teeth as well as Index of Eating Difficulty (IED) and Oral Health Impact Profile-14 (OHIP-14) questionnaire after cracked teeth were restored with occlusal veneers. MATERIALS AND METHODS: 27 cracked teeth of 24 patients with cold and/or biting pains without spontaneous/nocturnal pains were recruited in this study. The cracked teeth were restored with occlusal veneers fabricated by lithium disilicate ceramic. Cold test and biting test were used to evaluate pain signs. IED and OHIP-14 questionnaire were used to evaluate masticatory ability. FDI criteria was used to evaluate restorations. The paired Wilcoxon test was used to analyze significant differences of detection rate of pain signs, OHIP scores and IED grade before and after restorations. Kaplan-Meier survival curve was used to describe the success rate, vital pulp survival rate, and tooth survival rate. RESULTS: 27 cracked teeth were restored with occlusal veneers with average of 22.4-month follow-up. Two cracked teeth had pulpitis and pain signs of the other cracked teeth completely disappeared. OHIP total scores were significantly reduced after treatment. Scores of 'pain', 'occlusal discomfort', 'uncomfortable to eat', 'diet unsatisfactory' and 'interrupted meals' reduced significantly after treatment. After treatment, IED grades of 25 vital teeth were significantly lower than those before treatment. FDI scores of 25 restorations except for 2 teeth with pulpitis were no greater than 2. The 12 months accumulated pulp survival rate of the cracked teeth was 92.6%. The 12 months accumulated tooth survival rate was 100%. The success rate at the latest recall was 92.6%. CONCLUSION: Occlusal veneer restorations with success rate of 92.6% and the same pulp survival rate might be an effective restoration for treating the cracked teeth. CLINICAL RELEVANCE: The occlusal veneer restorations might be an option for treating the cracked teeth when cracks only involve enamel and dentin, not dental pulp.

Effect of the prism-interprisms three-dimension spatial microstructure on the enamel bond strength.

The prism-interprisms level of the enamel hierarchical microstructure is the largest degree of structural variation and most sophisticated structural adaptation. We studied the effect of the prism-interprisms three-dimension spatial microstructure on the enamel bond strength. We prepared 11 groups of enamel segments: longitudinally sectioned segments with or without a 45-degree bevel (group = 2), horizontally sectioned segments with or without a 45-degree bevel of three regions (the incisal, middle, and cervical) (group = 6), and tangential (labial) sectioned segments of three regions (the incisal, middle, and cervical) (group = 3). The finished surface of each segment was observed by scanning electric microscopy (SEM) before treatment with four self-etch adhesive systems and applied with four corresponding composite resins. Resin-bonded enamel samples were prepared in beams for microtensile bond strength (MTBS) tests. The results were analyzed with a three-way ANOVA followed by Tukey's post-hoc HSD multiple comparisons procedure. SEM observations revealed complex arrangements of prisms and interprisms. MTBS measurement showed that the longitudinally sectioned group had the lowest value, without significant differences between the groups with or without 45-degree bevel. Combining SEM observations and MTBS measurements, the prism-interprisms microstructure varied with the incisor regions, and different prism-interprisms microstructures allowed diverse sectioned surfaces, which could affect the enamel bonding.

ASSOCIATION OF ORAL MICROBIOTA AND PERIODONTAL DISEASE WITH LUNG CANCER: A SYSTEMATIC REVIEW AND META-ANALYSIS.

OBJECTIVES: Evidence of oral microbiota perturbations has been accumulated for lung cancers. This review focused on the oral microbiota alterations in population suffering from lung cancer. In addition, we also discussed conflicting data about the association between oral microbiota dysbiosis and risk of lung cancer. METHODS: A systematic search was conducted in Medline, Embase, PubMed, and Cochrane Library databases. The studies evaluated diversity and abundance of oral microbes in healthy and lung cancer individuals as well as association of periodontal disease and pathogens with lung cancer. Of 3559 studies, 28 included studies were performed in qualitative analysis, and 25 studies were used in meta-analyses for quantitative assessment. Heterogeneity was analyzed by using I² and chi-squared Q test statistics. Statistical analyses were performed by using the RevMan 5.4 software. RESULTS: Compared with the control, lung cancer patients had lower alpha diversity (Shannon: SMD = -0.54; 95% CI, -0.90 to -0.19; P < .01, I2 = 71%). In nested case-control studies, individuals with decreased alpha diversity tended to have an increased risk of lung cancer (observed species: HR = 0.90; 95% CI, 0.85-0.96; P < .01, I2 = 0%; Shannon: HR = 0.89; 95% CI, 0.83-0.95; P < .01, I2 = 0%). Overall, no strong evidence of association of relative abundance with specific oral microbes with lung cancers was found because of inconsistent data. No associations were found between periodontal pathogens and lung cancer risk (red complex: HR = 1.12, 95% CI: 0.42-3.02, P = .82, I2 = 62%; orange complex: HR =1.77, 95% CI: 0.78-3.98, P = .17, I2 = 36%), expect for Fusobacterium nucleatum (HR = 2.27, 95% CI: 1.13-4.58, P = .02, I2 = 0%). The positive association of periodontal disease with lung cancer risk was found (HR = 1.58, 95% CI: 1.25-2.00, P < .001, I2= 0%) with increase of periodontal diseases severity (HR = 2.39, 95% CI: 1.57-3.66, P < .001, I2 = 0%). However, such association was not found in never-smoker participants (HR = 1.00, 95% CI: 0.76-1.31, P = .37, I2= 7%). CONCLUSIONS: Lower alpha diversity of oral microbiome may be associated with a greater risk of lung cancer and might serve as a predictive signal of lung cancer risk. There was no strong evidence of relative abundance of oral microbial taxa and periodontal pathogens in lung cancer patients. Fusobacterium nucleatum might be a potential microbial candidate of biomarkers in lung cancer. Periodontal disease may be positively associated with lung cancer risk by confounding of smoking, but not an independent risk factor.

ANGPTL4 regulates the osteogenic differentiation of periodontal ligament stem cells.

The molecular mechanism of mechanical force regulating the osteogenic differentiation of periodontal ligament stem cells (PDLSCs) has not been clearly elucidated. In this study, two mRNA-seqs, GSE106887 and GSE109167, which contained several samples of PDLSCs under mechanical force, were downloaded from Gene Expression Omnibus. Differential expression analysis was firstly taken between GSE106887 and GSE109167, then the common 84 up-regulated genes and 26 down-regulated genes were selected. Function enrichment analysis was used to identify the key genes and pathways in PDLSCs subjected to the tension and compression force. PDLSCs were isolated from human periodontal ligament tissues. The effects of ANGPTL4 knockdown with shRNA on the osteogenic differentiation of PDLSCs were studied in vitro. Then, the orthodontic tooth movement (OTM) rat model was used to study the expression of HIF-1α and ANGPTL4 in alveolar bone remodeling in vivo. ANGPTL4 and the HIF-1 pathway were identified in PDLSCs subjected to the tension and compression force. alizarin red staining, alcian blue staining, and oil red O staining verified that PDLSCs had the ability of osteogenic, chondrogenic, and adipogenic differentiation, respectively. Verification experiment revealed that the expression of ANGPTL4 in PDLSCs significantly increased when cultured under osteogenic medium in vitro. While ANGPTL4 was knocked down by shRNA, the levels of ALPL, RUNX2, and OCN decreased significantly, as well as the protein levels of COL1A1, ALPL, RUNX2, and OCN. During the OTM, the expression of HIF-1α and ANGPTL4 in periodontal ligament cells increased on the tension and compression sides. We concluded the positive relationship between ANGPTL4 and osteogenic differentiation of PDLSCs.

Minimum residual root dentin thickness of mandibular premolars restored with a post: A finite element analysis study.

STATEMENT OF PROBLEM: Thin root dentin after post space preparation will increase the risk of root fracture. However, the minimum residual root dentin thickness to be preserved after post space preparation is unclear. PURPOSE: The purpose of this finite element analysis (FEA) study was to measure the residual root dentin thicknesses and analyze the stress distributions of post-restored mandibular premolars. MATERIAL AND METHODS: The cone beam computed tomography (CBCT) data of 90 first and second mandibular premolars from Chinese participants (44 men, 46 women; aged between 20 and 79 years) were analyzed. Cross-sections 5 to 9 mm from the radiologic apex were used to measure the buccolingual and mesiodistal root diameters. The probability that the residual thickness of the buccolingual and mesiodistal root walls would be no less than 0.5, 0.6, 0.7, 0.8, 0.9, and 1 mm after post space preparation with a #2 Peeso reamer was calculated. Six 3-dimensional finite element models of cast post-restored mandibular premolars with 0.5, 0.6, 0.7, 0.8, 0.9, and 1 mm mesial and distal root dentin thicknesses were established. A static force of 100 N was applied to the buccal cusp tip at 45, 60, 75, and 90 degrees to the long axis of the tooth, and the maximum tensile stress and von Mises stress were analyzed. The Bonferroni post hoc test (αcorrected=.003) was used for multiple comparisons. RESULTS: The buccolingual root diameter of mandibular premolars was wider than the mesiodistal root diameter. The probabilities that the mesiodistal residual root dentin thickness of mandibular first and second premolars at 5 mm from the apex would be no less than 1 mm after post space preparation with a #2 Peeso reamer were only 10% and 28%, respectively. The maximum tensile stress was at a minimum when the mesial and distal residual root dentin thickness was 0.6 mm in the external cervical dentin adjacent to the crestal bone and 1 mm in the apical dentin corresponding to the apex of the post. The maximum tensile stress of the mandibular premolar model with 0.6-mm mesial and distal residual root dentin thicknesses was lower than that with 0.9 mm and 1.0 mm thicknesses (Pcorrected<.001). CONCLUSIONS: Short posts or smaller instruments for post space preparation are recommended to obtain a 1-mm residual root dentin thickness in the mesiodistal direction of mandibular premolars. If a 1-mm thickness cannot be preserved, a minimum residual root dentin thickness of 0.6 to 0.9 mm in the mesiodistal direction should be retained.

Effects of disinfectants on physical properties of denture base resins: A systematic review and meta-analysis.

STATEMENT OF PROBLEM: The disinfection of removable dental prostheses and orthodontic appliances is essential to preventing transmission of pathogens. However, whether different disinfection solutions and durations affect the physical properties of denture base resins is unclear. PURPOSE: The purpose of this systematic review and meta-analysis was to statistically analyze the influence of disinfectants on the physical properties of denture base resins. MATERIAL AND METHODS: A systematic search in Medline, Embase, PubMed, and Cochrane Library databases was conducted to evaluate the effects of chemical disinfection on the physical properties of denture base resins such as surface morphology, roughness, hardness, and flexural strength. Of 1909 studies, 44 studies were included in the systematic review and 41 in the meta-analysis. Heterogeneity was analyzed by using I2 statistics. The influence of different disinfection solutions and durations on the physical properties was further analyzed, and the risk of bias evaluated. Statistical analyses were performed by using the RevMan 5.4 software program with the standardized mean differences (SMDs) and 95% confidence intervals (CIs). RESULTS: Of the 44 included studies, 40 studies were assessed as having a low risk of bias, and 4 had an unclear risk of bias. Meta-analysis results showed that compared with the control, disinfection could not significantly affect surface roughness and hardness within 60 minutes of immersion in disinfectant solutions or flexural strength within 30 minutes (roughness: P=.79, I2=0%; flexural strength: P=.08, I2=0%; hardness: P=.05, I2=19%). In addition, the physical properties were not significantly affected when glutaraldehyde, chlorhexidine, and peracetic acid were repeatedly used for more than 30 minutes. CONCLUSIONS: Most of the disinfectants did not reduce the physical properties of denture base resin within 30 minutes of immersion. Glutaraldehyde, chlorhexidine, and peracetic acid are recommended if longer immersion or repeated disinfection is required.

Influence of needle working length and root canal curvature on irrigation: a computational fluid dynamics analysis based on a real tooth.

BACKGROUNDS: To compare the irrigation efficiency with different needle working length and different root canal curvature based on a real unshaped root canal using computational fluid dynamics (CFD) method. METHODS: Images of the root canal of the maxillary first molar after being prepared to .04/15 were scanned using micro-CT, and then imported into the software for three-dimensional reconstruction. A palatal root canal with a curvature of 23.4° was selected as the experiment canal. The needle working length of the 30-G flat needle was 4.75 mm, 5 mm, 5.25 mm and 5.5 mm short of apical foramen respectively, the flow pattern, irrigation velocity, shear stress were compared. The modified curved canals with a curvature of 0°, 5°, 10°, 20° and 30°were reconstructed via software. The flat needle was replaced at the optical inserted depth, and key parameters of irrigation efficiency were analyzed. RESULTS: Decreased needle working length had a positive impact on irrigation efficiency. With the optimal needle working length, the replacement of the apical irrigation fluid, the effective velocity, and wall shear stress were significantly improved in more severely curved root canals. With the same needle working depth and analogous canal curvature, irrigation efficiency is higher in real canal than that of modified canal. CONCLUSIONS: Short needle working depth, large curvature and the anomalous inner wall of canals help to improve irrigation efficiency.

Hydroxypropylmethylcellulose as a film and hydrogel carrier for ACP nanoprecursors to deliver biomimetic mineralization.

Demineralization of hard tooth tissues leads to dental caries, which cause health problems and economic burdens throughout the world. A biomimetic mineralization strategy is expected to reverse early dental caries. Commercially available anti-carious mineralizing products lead to inconclusive clinical results because they cannot continuously replenish the required calcium and phosphate resources. Herein, we prepared a mineralizing film consisting of hydroxypropylmethylcellulose (HPMC) and polyaspartic acid-stabilized amorphous calcium phosphate (PAsp-ACP) nanoparticles. HPMC which contains multiple hydroxyl groups is a film-forming material that can be desiccated to form a dry film. In a moist environment, this film gradually changes into a gel. HPMC was used as the carrier of PAsp-ACP nanoparticles to deliver biomimetic mineralization. Our results indicated that the hydroxyl and methoxyl groups of HPMC could assist the stability of PAsp-ACP nanoparticles and maintain their biomimetic mineralization activity. The results further demonstrated that the bioinspired mineralizing film induced the early mineralization of demineralized dentin after 24 h with increasing mineralization of the whole demineralized dentin (3-4 µm) after 72-96 h. Furthermore, these results were achieved without any cytotoxicity or mucosa irritation. Therefore, this mineralizing film shows promise for use in preventive dentistry due to its efficient mineralization capability.

Retrospective study on the effectiveness of a prevention strategy in a dental hospital during the COVID-19 pandemic.

OBJECTIVES: To evaluate the effectiveness of a prevention strategy against the spread of SARS-CoV-2 infection among dental hospital staff over a 3-month period. MATERIALS AND METHODS: The effectiveness of the prevention strategy, which adopted healthcare staff protective measures, including patient triage and correct usage of personal preventive equipment, was evaluated by SARS-CoV-2 detection and serological testing. Patients who visited the Affiliated Stomatology Hospital, Zhejiang University School of Medicine, Hangzhou, China, between January 31 and March 1 (lockdown period) and March 2 and April 27 (reopening period) in 2020 and in the same period in 2019 were included in the study. Patients' diagnosis, age, gender, and several undergoing aerosol-generating procedures during the study period were collected from the hospital's database. Corresponding data were compared year-on-year (2020-on-2019). A total of 757 hospital staff underwent SARS-CoV-2 detection and serological testing on April 28-29, 2020. RESULTS: During the lockdown and reopening period in 2020, the number of hospital visits was dramatically decreased to about 6% and 58%, respectively, compared with the same period in 2019. However, emergency visits were increased 16- and 6.4-fold. A total of at least 6654 patients (13.58%) underwent aerosol-generating procedures during the study period in the year 2020. All hospital staff were negative according to SARS-CoV-2 detection and serological testing (IgG, IgM) data. CONCLUSION: During the study period in 2020, the total number of hospital visits dramatically reduced but emergency visits significantly increased. The prevention strategy implemented successfully prevented SARS-CoV-2 infection spread among healthcare workers in a dental hospital. CLINICAL RELEVANCE: The prevention strategy indicated patient triage and how to adopt preventive measures for controlling SARS-CoV-2 spread among healthcare workers. These data can be used as a reference for other sectors suffering from the COVID-19 pandemic.

Effect of a novel prime-and-rinse approach on short- and long-term dentin bond strength of self-etch adhesives.

This study investigated the effects of the prime-and-rinse approach, using a 10-methacryloyloxydecyl dihydrogen phosphate (MDP)-containing primer, on the short- and long-term dentin microtensile bond strengths (MTBSs) of mild self-etch adhesives. Half of sixty human midcoronal dentin surfaces were polished as control (self-etch approach), and the other half were polished and further treated with a 15% MDP-containing primer and thoroughly sprayed with water as prime-and-rinse approach. The dentin surfaces were treated with a self-etch adhesive, and a composite resin was placed on the surfaces. The following materials were used: Clearfil S3 Bond+Clearfil Majesty; G-Bond+Gradia Direct; Adper Easy One+Z250; and i Bond+Charisma. The MTBS was examined after 24 h and 14 months in water storage. The resin-dentin interfaces were analysed using scanning electron microscopy/transmission electron microscopy. Pretreated dentin surfaces were further analysed using scanning electron microscopy and micro-Raman spectroscopy. Compared with the self-etch approach, the prime-and-rinse approach significantly increased the dentin MTBS, regardless of the duration of storage. The scanning electron microscopy/transmission electron microscopy findings revealed that the prime-and-rinse approach removed most of the dentin smear layer. The Raman spectra of the MDP-treated dentin reveal the characteristic spectra of collagen, hydroxyapatite, and the monomer. Therefore, the prime-and-rinse approach using MDP-containing primers prior to the application of mild self-etch adhesives significantly increases the short- and long-term MTBS of dentin.

Effects of regional enamel and prism orientations on bovine enamel bond strength and cohesive strength.

This study investigated the regional microtensile bond strength (MTBS) and cohesive strength of bovine enamel. The crowns of bovine incisors were sectioned, either horizontally along incisal and cervical thirds to produce horizontal and tangential segments, or longitudinally along the midline to produce longitudinal segments. Half of the horizontal and longitudinal segments were prepared using a 45° bevel. Then, the differently sectioned enamel surfaces were treated with one- or two-step self-etch adhesives (Clearfil SE Bond or Clearfil S3 Bond) and a composite resin (Clearfil Majesty) was placed. Resin-bonded enamel samples were cut into beams for use in the MTBS tests. Labial horizontal and longitudinal segments of pure enamel beams were prepared for cohesive strength tests. Enamel microstructures were analyzed by scanning electron microscopy. Three-way anova followed by Tukey's post-hoc HSD multiple comparisons procedure showed that a 45° bevel cut did not statistically significantly improve enamel MTBS, which varied with the different regions. The longitudinally sectioned resin-bonded enamel samples had the lowest MTBS, and the horizontal enamel cohesive strength was weaker than that of the longitudinal enamel. The scanning electron microscopy fractographs indicated that rows of parallel prisms were detached from the fractured surfaces. In conclusion, the regional enamel MTBS and the cohesive strength are strongly related to the enamel microstructures and prism orientations.

The treatment outcomes of cracked teeth: A systematic review and meta-analysis.

OBJECTIVES: The aim of this review was to analyze the clinical treatment outcomes of cracked teeth (CT) retaining vital dental pulp (CT-VDP) or undergoing root canal treatment (CT-RCT). SOURCES: A systematic search was conducted in Medline, Embase, PubMed, and Cochrane Library databases. STUDY SELECTION: Studies evaluating tooth survival rate (TSR), pulp survival rate (PSR), and success rate (SR) with at least a one-year follow-up were included. The risk of bias was evaluated with the Newcastle-Ottawa scale. DATA: Twenty-seven studies underwent qualitative analysis, 26 of which were included in the meta-analysis. SR of monitoring without restorative treatments was 80 % at three years. TSR of CT-VDP was 92.8-97.8 % at 1‒6 years, PSR of CT-VDP was 85.6‒90.4 % at 1‒3 years, and SR of CT-VDP was 80.6‒89.9 % at 1‒3 years; TSR of CT-RCT was 90.5‒91.1 % at 1‒2 years, and SR of CT-RCT was 83.0‒91.2 % at 1‒4 years. Direct restorations without cuspal coverage for CT-VDP increased the risk ratio (RR) of pulpal complications (RR=3.2, 95 % CI: 1.51-6.82, p = 0.002) and tooth extraction (RR=8.1, 95 % CI: 1.05-62.5, p = 0.045) compared with full-crown restorations. The CT-RCT without full-crown restorations had an 11.3-fold higher risk of tooth extraction than the CT-RCT with full-crown restorations (p < 0.001). CONCLUSIONS: Monitoring without restorative treatments might be an option for the CT without any symptoms. Direct restorations without cuspal coverage for the CT-VDP could significantly increase the RR of pulpal complications and tooth extraction compared with full-crown restorations. Full-crown restorations are strongly recommended for the CT-RCT. CLINICAL SIGNIFICANCE: Monitoring without restorative treatments could be a viable option for the CT without any symptoms. Full-crown restorations are strongly recommended for the CT with any symptoms and the CT-RCT.

In-depth occlusion of dentine tubules via the application of (poly-L-aspartic acid)­strontium and phosphate/fluoride to treat dentine hypersensitivity.

Dentine hypersensitivity (DH) is a common oral health issue and occlusion of the exposed dentinal tubules (DTs) is regarded as the most effective therapeutic treatment nowadays. However, it is still difficult to develop easy and effective strategies for deep occlusion of DTs. In this study, we develop a strategy for occluding DTs deeply and compactly via simple application of occlusion media including (poly-L-aspartic acid)­strontium (PAsp­strontium) and phosphate/fluoride. The bonding of strontium ions to poly-L-aspartic acid formed a positively charged PAsp­strontium complexes. After application of 15 min each, the PAsp­strontium and phosphate/fluoride rapidly penetrated into the DTs in turn via the electrostatic interaction, then occluded the DTs with crystals up to a depth of 150 µm. The occlusion within DTs was resistant to abrasive and acidic challenges. The occlusion media performed better than commercial desensitizers Duraphat and Gluma. Moreover, this strategy possessed sufficient biocompatible and excellent performance in vivo. The application of occlusion media would shed light on in the management of DH.

Intrafibrillar mineralization of type I collagen with calcium carbonate and strontium carbonate induced by polyelectrolyte-cation complexes.

Calcium carbonate (CaCO3), possessing excellent biocompatibility, bioactivity, osteoconductivity and superior biodegradability, may serve as an alternative to hydroxyapatite (HAp), the natural inorganic component of bone and dentin. Intrafibrillar mineralization of collagen with CaCO3 was achieved through the polymer-induced liquid precursor (PILP) process for at least 2 days. This study aims to propose a novel pathway for rapid intrafibrillar mineralization with CaCO3 by sequential application of the carbonate-bicarbonate buffer and polyaspartic acid (pAsp)-Ca suspension. Fourier transform infrared (FTIR) spectroscopy, zeta potential measurements, atomic force microscopy/Kelvin probe force microscopy (AFM/KPFM), and three-dimensional stochastic optical reconstruction microscopy (3D STORM) demonstrated that the carbonate-bicarbonate buffer significantly decreased the surface potential of collagen and CO32-/HCO3- ions could attach to collagen fibrils via hydrogen bonds. The electropositive pAsp-Ca complexes and free Ca2+ ions are attracted to and interact with CO32-/HCO3- ions through electrostatic attractions to form amorphous calcium carbonate that crystallizes gradually. Moreover, like CaCO3, strontium carbonate (SrCO3) can deposit inside the collagen fibrils through this pathway. The CaCO3-mineralized collagen gels exhibited better biocompatibility and cell proliferation ability than SrCO3. This study provides a feasible strategy for rapid collagen mineralization with CaCO3 and SrCO3, as well as elucidating the tissue engineering of CaCO3-based biomineralized materials.

A novel approach to full-mouth rehabilitation of dentinogenesis imperfecta type II: Case series with review of literature.

RATIONALE: Dentinogenesis imperfecta (DI) is an autosomal-dominant disorder. The most common clinical manifestations, including obliterated tooth tissues and severe tooth wear, usually lead to tooth extractions. It remains a great challenge for dentists to preserve the residual tooth tissue and establish the esthetics and occlusion of dentitions. PATIENTS CONCERNS: 25-year-old twin sisters, who had suffered from dentinogenesis imperfecta type II for more than 10 years, presented with continuous tooth wear and discomfort from wearing a removable partial denture for more than 3 years. DIAGNOSIS: Intraoral examination showed extensive tooth wear with enamel exfoliation and typical amber-brown color with an opalescent discoloration. Their panoramic radiographs revealed completely obliterated tooth tissues and severe tooth wear. INTERVENTIONS AND OUTCOMES: The dentitions were restored with post-and-core crowns and pin lays after preparing root post paths and pin holes guided by computer-aided design/computer-aided manufacturing (CAD/CAM) procedures, resulting in a successful repair. LESSONS: Severe tooth wear and tooth tissue obliteration are typical clinical manifestations in DI-affected dentitions, increasing the complexity and difficulty in dental restorations. Early diagnosis and appropriate treatments are essential to achieve a favorable prognosis. CAD/CAM procedures, permitting accurate and effective treatment, possess promising potential in the treatment of DI-affected dentitions.

Remineralizing effects of hydroxypropyl methylcellulose film-loaded amorphous calcium phosphate nanoprecursors on enamel artificial caries lesions.

OBJECTIVES: This study was to investigate hydroxypropyl methylcellulose (HPMC) film as a carrier for amorphous fluorinated calcium phosphate (AFCP) nanoprecursors to continuously deliver biomimetic remineralization of enamel artificial caries lesions (ACL). MATERIALS AND METHODS: The AFCP/HPMC films were comprised of 25 wt% AFCP nanoparticles and 75 wt% HPMC. They were characterized by transmission electron microscopy (TEM), Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), and biocompatibility tests. Forty enamel ACL were prepared and randomly divided into four groups (n = 10): The enamel surfaces were covered with a pure HPMC film, Tooth Mousse Plus (contains 10% CPP-ACP and 0.2% NaF), and AFCP/HPMC film, or without any things (serving as negative control). Subsequently, all samples were alternatively kept in artificial saliva and a modified pH-cycling before they were characterized by Micro-CT, scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDX), attenuated total reflectance (ATR)-FTIR, XRD, and nanoindentation. RESULTS: After the enamel ACL was challenged by pH cycling, Tooth Mousse Plus and AFCP/HPMC film groups exhibited less lesion depth and mineral loss than the negative control and pure HPMC film groups. Additionally, the AFCP/HPMC film group revealed a highest remineralization rate of 55.34 ± 3.10 % among the all groups (p < 0.001). The SEM findings showed that the enamel ACL were densely deposited with minerals in the AFCP/HPMC film group, and the EDX results suggested a higher content of fluorine in the remineralized tissues. In particular, the AFCP/HPMC film group exhibited the best nanomechanical performance after 2 weeks of pH cycling (p < 0.05), with the hardness (H) restored from 0.29 ± 0.19 to 2.69 ± 0.70 GPa, and elastic modulus (Er) restored from 10.77 ± 5.30 to 68.83 ± 12.72 GPa. CONCLUSION: The AFCP/HPMC film might be used as a promising strategy for arresting or reversing incipient enamel caries lesions.

Remineralization of Dentin with Cerium Oxide and Its Potential Use for Root Canal Disinfection.

Objective: This study was to investigate a novel antibacterial biomimetic mineralization strategy for exploring its potential application for root canal disinfection when stabilized cerium oxide was used. Material and Methods: A biomimetic mineralization solution (BMS) consisting of cerium nitrate and dextran was prepared. Single-layer collagen fibrils, collagen membranes, demineralized dentin, and root canal system were treated with the BMS for mineralization. The mineralized samples underwent comprehensive characterization using various techniques, including transmission electron microscopy (TEM), high-resolution TEM (HRTEM), Fourier transform infrared spectroscopy (FTIR), scanning transmission electron microscopy (STEM), selected-area electron diffraction (SAED), energy-dispersive X-ray spectroscopy (EDX), X-ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM), and micro-CT. Additionally, the antimicrobial properties of the BMS and the remineralized dentin were also analyzed with broth microdilution method, live/dead staining, and SEM. Results: Cerium ions in the BMS underwent a transformation into cerium oxide nanoparticles, which were deposited in the inter- and intra-fibrillar collagen spaces through a meticulous bottom-up process. XPS analysis disclosed the presence of both Ce (III) and Ce (IV) of the generated cerium oxides. A comprehensive examination utilizing SEM and micro-CT identified the presence of cerium oxide nanoparticles deposited within the dentinal tubules and lateral canals of the root canal system. The BMS and remineralized dentin exhibited substantial antibacterial efficacy against E. faecalis, as substantiated by assessments involving the broth dilution method and live/dead staining technique. The SEM findings revealed the cell morphological changes of deceased E. faecalis. Conclusion: This study successfully demonstrated antibacterial biomimetic mineralization as well as sealing dentinal tubules and lateral branches of root canals using cerium nitrate and dextran. This novel biomimetic mineralization could be used as an alternative strategy for root canal disinfection.

A glycol chitosan derivative with extrafibrillar demineralization potential for self-etch dentin bonding.

OBJECTIVES: Extrafibrillar demineralization is an etching technique that removes only minerals from around the collagen fibrils for resin infiltration. The intrafibrillar minerals are left intact to avoid their replacement by water that is hard for adhesive resin monomers to displace. The present work reported the synthesis of a water-soluble methacryloyloxy glycol chitosan-EDTA conjugate (GCE-MA) and evaluated its potential as an extrafibrillar demineralization agent for self-etch dentin bonding. METHODS: Glycol chitosan-EDTA was functionalized with a methacryloyloxy functionality. Conjugation was confirmed using Fourier transform-infrared spectroscopy. The GCE-MA was used to prepare experimental self-etch primers. Extrafibrillar demineralization of the primers was evaluated with scaning electron microscopy and transmission electron microscopy. The feasibility of this new self-etch bonding approach was evaluated using microtensile bond strength testing and inhibition of dentin gelatinolytic activity. The antibacterial activity and cytotoxicity of GCE-MA were also analyzed. RESULTS: Conjugation of EDTA and the methacryloyloxy functionality to glycol chitosan was successful. The functionalized conjugate was capable of extrafibrillar demineralization of mineralized collagen fibrils. Tensile bond strength of the experimental self-etch primer to dentin was comparable to that of phosphoric acid-etched dentin and the commercial self-etch primer Clearfil SE Bond 2. The GCE-MA also inhibited soluble rhMMP-9. In-situ zymography detected minimal fluorescence in hybrid layers conditioned with the experimental primer. The GCE-MA was noncytotoxic and possessed antibacterial activities against planktonic bacteria. SIGNIFICANCE: Synthesis of GCE-MA brought into fruition a self-etch conditioner that selectively demineralizes the extrafibrillar mineral component of dentin. A self-etch primer prepared with GCE-MA achieved bond strengths comparable to commercial reference adhesive systems.

Polyelectrolyte-Cation Complexes Using PAsp-Sr Complexes Induce Biomimetic Mineralization with Antibacterial Ability.

Remineralized dentin with an antibacterial ability is still a significant challenge in dentistry. Previously, a polyelectrolyte-calcium complexes pre-precursor (PCCP) process is proposed for rapid collagen mineralization. In the present study, the expansion concept of the PCCP process is explored by replacing the calcium with other cations, such as strontium. The results of transmission electron microscopy (TEM), 3D stochastic optical reconstruction microscopy, energy-dispersive X-ray analysis, Fourier transform infrared spectroscopy, and high-resolution TEM with selected area electron diffraction demonstrate that biomimetic mineralization of collagen fibrils and demineralized dentin could be fulfilled with Sr&F-codoped hydroxyapatite (HAp) after they are treated with poly-aspartic acid-strontium (PAsp-Sr) suspension followed by a phosphate&fluoride solution. Moreover, dentin remineralized with Sr&F-codoped HAp exhibits in vitro and in vivo antibacterial ability against Streptococcus mutans. The cytotoxicity and oral mucosa irritation tests reveal excellent biocompatibility of mineralization mediums (PAsp-Sr suspension and phosphate&fluoride solution). The demineralized dentin's mechanical properties (elastic modulus and microhardness) could be restored almost to that of the intact dentin. Hence, the expansion concept of the PCCP process that replaces calcium ions with some cationic ions along with fluorine opens up new horizons for generating antibacterial remineralized dentin containing ions-doped HAp with excellent biocompatibility via biomimetic mineralization technology.

Dentin surface modification by MDP to improve dentin bonding stability: Topological enhancement and mineralization of collagen structure in hybrid layers.

Decades of research have been conducted on 10-Methacryloyloxydecyl dihydrogen phosphate (MDP) through numerous studies. The mechanisms by which its residual calcium salts benefit dentin bonding remain undetermined. The objective of the research was to investigate the role and process of remaining calcium salts in the priming procedure and their capacity for remineralization. The investigation focused on the variations in topological structure, mechanical properties, and chemical interactions between the main agent and the dentin surface. Two adhesive modes including prime-and-rinse(P&R) and prime-and-nonrinse (P&NR) utilized to evaluate the bonding performance and remineralization ability. The findings indicated that both P&R and P&NR methods could eliminate the smear-layer, uncover dentinal-tubules, and generate a textured/rough surface on the dentin. Collagen fibrils exhibited a greater presence of inorganic minerals in the P&NR mode. Compared to control group, both P&R and P&NR groups improved immediate and aging bond strength significantly (P < 0.05). AFM and 3D-STORM revealed MDP and its residual calcium salts distributed in collagen fibrils and expanded collagen matrix. In the P&NR group, TEM revealed that the dentin collagen matrix experienced some remineralization, and there was also mineralization within the collagen fibrils embedded in the bonding interface. Thus, MDP priming improved dentin bonding stability. Residual calcium salts of P&NR process can enhance topological structure of the collagen matrix and induce intrafibrillar mineralization.