The microneedles carrying cisplatin and IR820 to perform synergistic chemo-photodynamic therapy against breast cancer.

BACKGROUNDS: Surgical resection and adjunct chemotherapy or radio-therapy has been applied for the therapy of superficial malignant tumor in clinics. Whereas, there are still some problems limit its clinical use, such as severe pains and side effect. Thus, it is urgent need to develop effective, minimally invasive and low toxicity therapy stagey for superficial malignant tumor. Topical drug administration such as microneedle patches shows the advantages of reduced systemic toxicity and nimble application and, as a result, a great potential to treat superficial tumors. METHODS: In this study, microneedle (MN) patches were fabricated to deliver photosensitizer IR820 and chemotherapy agent cisplatin (CDDP) for synergistic chemo-photodynamic therapy against breast cancer. RESULTS: The MN could be completely inserted into the skin and the compounds carrying tips could be embedded within the target issue for locoregional cancer treatment. The photodynamic therapeutic effects can be precisely controlled and switched on and off on demand simply by adjusting laser. The used base material vinylpyrrolidone-vinyl acetate copolymer (PVPVA) is soluble in both ethanol and water, facilitating the load of both water-soluble and water-insoluble drugs. CONCLUSIONS: Thus, the developed MN patch offers an effective, user-friendly, controllable and low-toxicity option for patients requiring long-term and repeated cancer treatments.

CuS Nanodot-Loaded Thermosensitive Hydrogel for Anticancer Photothermal Therapy.

The purpose of this research is to establish an injectable hydrogel encapsulating copper sulfide (CuS) nanodots for photothermal therapy against cancer. The CuS nanodots were prepared by one-pot synthesis, and the thermosensitive Pluronic F127 was used as the hydrogel matrix. The CuS nanodots and the hydrogel were characterized by morphous, particle size, serum stability, photothermal performance upon repeated 808 nm laser irradiation, and rheology features. The effects of the CuS nanodots and the hydrogel were evaluated qualitatively and quantitatively in 4T1 mouse breast cancer cells. The retention, photothermal efficacy, therapeutic effects, and systemic toxicity of the hydrogel were assessed in tumor bearing mouse model. The CuS nanodots with a diameter of about 8 nm exhibited satisfying serum stability, photoheat conversion ability, and repeated laser exposure stability. The hydrogel encapsulation did not negatively influence the above features of the photothermal agent. The nanodot-loaded hydrogel shows a phase transition at body temperature and, as a result, a long retention in vivo. The photothermal-agent-embedded hydrogel played a promising photothermal therapeutic effect in the tumor bearing mouse model with low systemic toxicity after peritumoral administration.

Injectable hydrogel encapsulating Cu2MnS2 nanoplates for photothermal therapy against breast cancer.

BACKGROUND: In order to explore the possibility of treating breast cancer by local photo-therapy, a photothermal agents loaded in situ hydrogel was established. In detail, The Cu2MnS2 nanoplates were prepared by one-pot synthesis and, the thermosensitive Pluronic F127 was used as the hydrogel matrix. The Cu2MnS2 nanoplates and the hydrogel were characterized by morphous, particle size, serum stability, photothermal performance upon repeated 808 nm laser irradiation as well as the rheology features. The therapeutic effects of the Cu2MnS2 nanoplates and the hydrogel were evaluated qualitatively and quantitatively in 4T1 mouse breast cancer cells. The retention, photothermal efficacy, therapeutic effects and systemic toxicity of the hydrogel were assessed in tumor bearing mouse model. RESULTS: The Cu2MnS2 nanoplates with a diameter of about 35 nm exhibited satisfying serum stability, photo-heat conversion ability and repeated laser exposure stability. The hydrogel encapsulation did not negatively influence the above features of the photothermal agent. The nanoplates loaded in situ hydrogel shows a phase transition at body temperature and, as a result, a long retention in vivo. CONCLUSIONS: The photothermal agent embedded hydrogel played a promising photothermal therapeutic effects in tumor bearing mouse model with low systemic toxicity after peritumoral administration.

The insulin long-acting chitosan - Polyethyleneimine nanoparticles to treat the type 2 diabetes mellitus and prevent the associated complications.

Type 2 diabetes mellitus (T2DM) is a complex metabolic disorder, which is ultimately treated by the insulin (INS). However, the subcutaneous (s. c.) injection of insulin solution faces the problems of pain and unsatisfactory patient compliance. In this study, the long-acting formulations of insulin are propsed to treat the T2DM and prevent the associated complications. The chitosan (CS) and/or branched polyethyleneimine (bPEI) nanoparticles (bPEI-INS NPs, CS-bPEI-INS NPs) were constructed to load insulin. The long -acting nanoparticles successfully achieved the sustained release of the INS in vitro and in vivo. After s. c. administration, the CS-bPEI-INS NPs greatly improved the INS bioavailability. As a result, the CS-bPEI-INS NPs produced sustained glucose-lowering effects, promising short-term and long-term hypoglycemic efficacy in the T2DM model. Furthermore, the treatment of the CS-bPEI-INS NPs greatly protected the islet in the pancreas and prevented the associated complications of the T2DM, such as cardiac fibrosis in the myocardial interstitium and the perivascular area. In a word, the CS-bPEI-INS NPs was an encouraging long-acting formulation of insulin and had great potential in the treatment of T2DM.

Activatable unsaturated liposomes increase lipid peroxide of cell membrane and inhibit tumor growth.

The cancer chemodynamic therapy based on the Fenton reaction has been attracting more and more attention. However, the performance of the Fenton reaction is restricted by the unsuitable physiological pH value and inadequate H2O2 content in the tumor microenvironment (TME). In this study, we proposed a novel method of inducing lipid peroxide (LPO) of the cancer cell membrane, whose performance is not limited by the pH value and H2O2 in the TME. The activatable LPO-inducing liposomes were constructed by encapsulating Fe3+-containing compound ferric ammonium citrate (FC) in the unsaturated soybean phospholipids (SPC). It was found that the FC could be reduced by the overexpressed glutathione (GSH) in the TME and produce iron redox couple. The Fe3+/Fe2+ mediated the peroxidation of the unsaturated SPC and induced the LPO in the cancer cells. Finally, LPO accumulation led to cancer cell death and tumor growth inhibition. Furthermore, the activatable liposomes did not damage healthy tissues because of the low GSH content in normal tissues and the GSH-triggered activation of the nanocarrier. Together, our findings revealed that FC-SPC-lipo displayed excellent anti-tumor performance and its therapeutic effects are less influenced by the TME, compared with the traditional ferroptosis.

The use of amphiphilic copolymer in the solid dispersion formulation of nimodipine to inhibit drug crystallization in the release media: Combining nano-drug delivery system with solid preparations.

Solid dispersion is a widely used method to improve the dissolution and oral bioavailability of water-insoluble drugs. However, due to the strong hydrophobicity, the drug crystallization in the release media after drug dissolution and the resulted decreased drug absorption retards the use of solid dispersions. It is widely known that the amphiphilic copolymer can encapsulate the hydrophobic compounds and help form stable nano-dispersions in water. Inspired by this, we tried to formulate the solid dispersion of nimodipine by using amphipathic copolymer as one of the carriers. Concerning the solid dispersions, there are many important points involved in these formulations, such as the miscibility between the drug and the carriers, the storage stability of solid dispersions, the dissolution enhancement and so on. In this study, a systemic method is proposed. In details, the supersaturation test and the glass transition temperature (Tg) measurement to predict the crystallization inhibition, the ratios of different components and the storage stability, the interactions among the components were investigated in detail by nuclear magnetic resonance (1H NMR) and isothermal titration calorimetry (ITC) and, the final dissolution and oral bioavailability enhancement. It was found that the amphiphilic copolymer used in the solid dispersion encouraged the formation the drug loading micelles in the release media and, finally, the problem of drug crystallization in the dissolution process was successfully solved.

Tri-block polymer with interfacial layer formation ability and its use in maintaining supersaturated drug solution after dissolution of solid dispersions.

BACKGROUND: Maintaining a supersaturated drug solution after the dissolution of the solid dispersions of water insoluble drugs continues to be a great challenge and is important to the oral bioavailability enhancement of hardly soluble drugs. METHODS: Nimodipine solid dispersions were prepared by hot-melt extrusion and a special tri-block polymer was employed as a co-carrier. The solid dispersions were characterized by modulated differential scanning calorimetry, transmission electron microscopy, hydrogen-nuclear magnetic resonance and so on. RESULTS: The tri-block polymer was able to inhibit the formation of drug crystals after dissolution of the solid dispersions. Due to the unique interfacial layer formation ability of the tri-block polymer, a special drug loading micelle which encapsulated the compound and the hydrophobic fragments of the copolymers appeared in the release media. The tri-block polymer was composed of a hydrophilic part forming the shell of micelles, a hydrophobic part shaping the core of micelles, and a special intermediate hydrophilicity part constructing the interfacial layer of micelles. CONCLUSION: The tri-block polymer was not only able to stabilize the supersaturated drug solution of solid dispersions to enhance the oral bioavailability of hardly soluble drugs, but is also a potential candidate to construct micelles for systemic administration, due to the good compatibility and organic solvents free micelle formation procedure.