RESUMO
As the most advanced aerogel material, silica aerogel has had transformative industrial impacts. However, the use of silica aerogel is currently limited to the field of thermal insulation materials, so it is urgent to expand its application into other fields. In this work, silica aerogel/resin composites were successfully prepared by combining silica aerogel with a resin matrix for dental restoration. The applications of this material in the field of dental restoration, as well as its performance, are discussed in depth. It was demonstrated that, when the ratio of the resin matrix Bis-GMA to TEGDMA was 1:1, and the content of silica aerogel with 50 µm particle size was 12.5%, the composite achieved excellent mechanical properties. The flexural strength of the silica aerogel/resin composite reached 62.9546 MPa, which was more than five times that of the pure resin. Due to the presence of the silica aerogel, the composite also demonstrated outstanding antibacterial capabilities, meeting the demand for antimicrobial properties in dental materials. This work successfully investigated the prospect of using commercially available silica aerogels in dental restorative materials; we provide an easy method for using silica aerogels as dental restorative materials, as well as a reference for their application in the field of biomedical materials.
Assuntos
Resinas Compostas , Dióxido de Silício , Bis-Fenol A-Glicidil Metacrilato , Teste de Materiais , Tamanho da PartículaRESUMO
In this study, a green, highly efficient and low energy consumption preparation method of cellulose nanofiber (CNF) was developed by using agricultural and forestry waste durian rinds as raw materials. The power of ultrasonic treatment was successfully reduced to only 360 W with low molecular weight liquid DMSO. The obtained durian rind-based CNF had a diameter of 8-20 nm and a length of several micrometers. It had good dispersion and stability in water, and could spontaneously cross-link to form hydrogel at room temperature when the concentration was more than 0.5%. The microscopic morphology and compressive properties of CNF aerogels and composite cellulose aerogels prepared from durian rind-based CNF were evaluated. It was found that CNF could effectively prevent the volume shrinkage of aerogel, and the concentration of CNF had a significant effect on the microstructure and mechanical properties of aerogel. The CNF aerogel with 1% CNF exhibited a sheet structure braced by fibers, which had the strongest compression performance. The porosity of CNF aerogels was high to 99%. The compressive strength of the composite cellulose aerogel with durian rind-based CNF was effectively enhanced.
Assuntos
Bombacaceae , Nanofibras , Celulose/química , Dimetil Sulfóxido , Hidrogéis , Nanofibras/química , ÁguaRESUMO
Polyethylene film is the most widely used plastic film in agricultural production activities, and its depolymerization products are mainly polyethylene-particles (PE-particles) of different molecular weights. However, the impact of the molecular weights of the PE-particles on soil-crop microenvironment has not been elucidated. In this study, a potted microcosmic simulation system was used to evaluate the impact of low, medium and high molecular weight PE-particles on soil metabolism, microbial community structure, and crop growth. There were obvious differences in the shape and surface microstructure of PE-particles with different molecular weights. Soil sucrase and peroxidase had significant responses to PE-particles of different molecular weights. In the rhizosphere, the number of microorganisms and the microbial alpha diversity index increased with increasing PE-particles molecular weight. Rhizobacter, Nitrospira, and Sphingomonas were the dominant microorganisms induced by PE-particles to regulate the metabolism of elements. Carbohydrate and amino acid contents in rhizosphere soils were the key factors affecting the species abundance of Lysobacter, Polyclovorans, Rhizobacter, and Sphingomonas. In plants, PE-particles treatment reduced the plant biomass and photosynthetic rate and disrupted normal mineral nutrient metabolism. Different molecular weight PE-particles may therefore have adverse effects on the soil-plant system.
Assuntos
Microbiota , Rizosfera , Peso Molecular , Polietileno , Solo , Microbiologia do Solo , Zea maysRESUMO
OBJECTIVE: Plasma treatment can be used as surface treatment of PEEK (poly-ether-ether-ketone) to increase the bonding strength between veneering composite and dental prosthetic frameworks of PEEK or enhance biocompatibility of PEEK implants. These improvements are probably based on chemical changes of the PEEK surface. However, the aim of the study was to evaluate the impact of different low-pressure plasma treatments on surface properties of PEEK, such as roughness, hydrophilicity, micro-hardness, crystallinity and biological activity of PEEK. METHODS: Due to different plasma treatments, 143 disc-shaped specimens of pure implantable PEEK were divided into 4 groups: PEEK (no plasma treatment, n = 29), H-PEEK (hydrogen plasma treatment, n = 38), O-PEEK (oxygen plasma treatment, n = 38), H/O-PEEK (hydrogen/oxygen plasma treatment with a gas mix ratio of 2:1, n = 38). Subsequently, surface roughness, surface contact angle, surface crystallinity, surface micro-hardness and human osteoblast cell coverage area of each group were examined. RESULTS: The hydrophilicity, crystallinity and micro-hardness of the plasma-treated groups increased significantly compared to the untreated group, whereas significant differences in the results of the micro-hardness tests could be shown between all groups up to a test force of 0.02N. Cell density was significantly higher on treated vs. untreated PEEK surfaces. Oxygen and H/O plasma treatments revealed to be most effective, whereas H/O plasma worked ten times faster to achieve the same effects. SIGNIFICANCE: The hydrogen-oxygen, 2/1-mixed plasma treatment combines the effect of hydrogen and oxygen plasma which strongly improve the surface properties of PEEK implant material, such as hydrophilicity, crystallinity, surface micro-hardness and HOB cell adhesion.
Assuntos
Implantes Dentários , Benzofenonas , Humanos , Cetonas , Plasma , Polietilenoglicóis , Polímeros , Propriedades de SuperfícieRESUMO
Different from current harvesting methods, the aim of this study was to concentrate microalgae by removing the medium with polyacrylic superabsorbent polymers (PSAPs). This method can concentrate freshwater microalgae Chlorella sp. at a relatively high biomass concentration of 90.23â¯gâ¯L-1. Without further dewatering, the concentrated microalgae can be directly used to produce biofuels by oil extraction or fermentation. The kinetic characteristics of PSAPs swelling in different solutions were investigated. The results indicate that the negative influence on absorbency caused by ionic strength was greater than microalgae concentration. Compared with the diffusion part, water absorbed by the relaxation of PSAPs was dominant and accounted for over 97%. Equilibrium absorbed water equations under different microalgae concentration were fitted and could provide guide to quantifiably concentrate microalgae. Increasing temperature decreased the absorbency of PSAPs, while, the absorption and desorption rate were increased. Moreover, the absorbency remained at 91.45% after recycling three times.
Assuntos
Biocombustíveis , Microalgas , Biomassa , Chlorella , Cinética , PolímerosRESUMO
BACKGROUND: Owing to simplify the operation and shorten the overall duration of treatment, immediate implantation earned much satisfactory from patients and dentists. The results of immediate implantation determined by osseointegration, we fabricated a micro/nanotextured titanium implants to improve osseointegration immediately after tooth extraction. PURPOSE: The aim of this study was to investigate the effect of hierarchical micro/nanotextured titanium implant on osseointegration immediately after tooth extraction. MATERIAL AND METHODS: The micro/nanotextured titanium implants were fabricated by etching with 0.5 wt% hydrofluoric (HF) acid followed by anodization in HF electrolytes. Implants with a machined surface as well as implants a microtextured surface prepared by 0.5 wt% HF etching served as control groups. The machined, microtextured, and micro/nanotextured implants were inserted into fresh sockets immediately after tooth extraction in beagle dogs. Twelve weeks after implantation, the animals were sacrificed for micro-CT scanning, histological analysis and biomechanical test. RESULTS: The micro-CT imaging revealed that the bone volume/total volume (BV/TV) and trabecular thickness (Tb.Th) in the micro/nanotextured group was significantly higher than that in the machined group and microtextured group, and the trabecular separation (Tb.Sp) in the micro/nanotextured group was significantly lower than that in the other groups. For the histological analysis, the bone-to-implant contact in the machined, micro and micro/nanotextured groups were 47.13 ± 6.2%, 54.29 ± 4.18%, and 63.38 ± 7.63%, respectively, and the differences significant. The maximum pull-out force in the machined, micro, and micro/nanotextured groups were 216.58 ± 38.71 N, 259.42 ± 28.93 N, and 284.73 ± 47.09 N, respectively. CONCLUSIONS: The results indicated that implants with a hierarchical micro/nanotextured can promote osseointegration immediately after tooth extraction.
Assuntos
Implantação Dentária Endóssea , Titânio/uso terapêutico , Extração Dentária , Animais , CãesRESUMO
Microalgae cells release O2 during photosynthesis. The gas can accumulate and adhere in form of bubbles, which affect the transport of nutrients in the biofilm and the biofilm microstructure. To investigate the reasons for the adhesion of these oxygen bubbles and their impact on biofilm, polytetrafluoroethylene (PTFE) emulsion was sprayed onto glass surface to change the parameters for gas accumulation and adhesion. The results indicated gas could aggregate into bubbles and adhere to hydrophobic and rough surface. The bubble behaviors caused the biofilm to be porous (with a microporosity of 9.43-20.94%). The biomass concentration of the more porous biofilm increased by 9.26% to 22.42gm-2 on 1% PTFE-treated surface compared to that on an untreated surface. However, with an increase in PTFE concentration, the amount of adhered bubbles increased. More microalgae cells in biofilms were carried up by bubbles. The biofilm concentration on 5% PTFE-treated surface decreased by 15.30%.
Assuntos
Biofilmes , Fotossíntese , Scenedesmus , Oxigênio , PolitetrafluoretilenoRESUMO
To offset the adverse effects of light attenuation on microalgae growth, hollow polymethyl methacrylate (PMMA) tubes were embedded into a flat-plate photobioreactor (PBR) as light guides. In this way, a fraction of incident light could be transmitted and emitted to the interior of the PBR, providing a secondary light source for cells in light-deficient regions. The average light intensity of interior regions 3-6cm from surfaces with 70µmolm(-2)s(-1) incident light was enhanced 2-6.5 times after 3.5days cultivation, resulting in a 23.42% increase in biomass production to that cultivated in PBR without PMMA tubes. The photosynthetic efficiency of microalgae in the proposed PBR was increased to 12.52%. Moreover, the installation of hollow PMMA tubes induced turbulent flow in the microalgae suspension, promoting microalgae suspension mixing. However, the enhanced biomass production was mainly attributed to the optimized light distribution in the PBR.
Assuntos
Chlorella vulgaris/crescimento & desenvolvimento , Chlorella vulgaris/efeitos da radiação , Luz , Microalgas/crescimento & desenvolvimento , Microalgas/efeitos da radiação , Fotobiorreatores/microbiologia , Aerobiose , Biomassa , Fotossíntese/efeitos da radiação , Polimetil Metacrilato/químicaRESUMO
A novel self-adaptive microalgae photobioreactor using anion exchange membranes (AEM-PBR) for continuous supply of nutrients was proposed to improve microalgae biomass production. The introduction of anion exchange membranes to the PBR can realize continuous supply of nutrients at desired rates, which is beneficial to the growth of microalgae. The results showed that the maximum biomass concentration obtained in the AEM-PBR under continuous supply of nitrogen at an average rate of 19.0mgN/L/d was 2.98g/L, which was 129.2% higher than that (1.30g/L) in a PBR with all the nitrogen supplied in batch at initial. In addition, the feeding rates of nitrogen and phosphorus were optimized in the AEM-PBR to maximize biomass production. The maximum biomass concentration of 4.38g/L was obtained under synergistic regulation of nitrogen and phosphorus feeding rates at 19.0mgN/L/d and 4.2mgP/L/d. The AEM-PBR demonstrates a promising approach for high-density cultivation of microalgae.
Assuntos
Membranas Artificiais , Microalgas/crescimento & desenvolvimento , Fotobiorreatores , Ânions , Biomassa , Nitrogênio/análise , Fósforo/análiseRESUMO
To eliminate the negative impacts of pollutants in wastewater (such as suspended solids, excess N, P, heavy metals) on microalgae growth, an annular ion-exchange-membrane photobioreactor (IEM-PBR) was proposed in this study. The IEM-PBR could avoid direct mixing of algae cells with wastewater by separating them into two chambers. In the IEM-PBR, the nutrients (mainly N and P) in wastewater continuously permeated into microalgae cultures through the ion-exchange-membrane for microalgae growth, while the pollutants hardly permeated into microalgae cultures. Three types of representative wastewater were investigated to evaluate the performance of the IEM-PBR. When cultivated with wastewater containing excess nutrients, high turbidity and excess heavy metals, microalgae biomass concentrations were significantly improved from 2.34, 2.15 and 0gL(-1) in the traditional PBR to 4.24, 3.13 and 2.04gL(-1) in the IEM-PBR. Correspondingly, the removal efficiencies of N and P in wastewater were also greatly improved by using the IEM-PBR.
Assuntos
Membranas Artificiais , Microalgas/crescimento & desenvolvimento , Fotobiorreatores , Biomassa , Troca Iônica , Metais Pesados , Águas ResiduáriasRESUMO
OBJECTIVE: To investigate the correlation of CD(+)4 T lymphocyte count and prostaglandin E2 (PGE2) in gingival crevicular fluid (GCF) with periodontal status in HIV-positive patients with periodontitis. METHODS: Twenty subjects were selected according to inclusion criteria. The plasmatic CD(+)4 T lymphocytes were counted. All the individuals were divided into three groups, group A (CD(+)4 T lymphocyte count < 200 cell/mm(3)), group B (200 cell/mm(3) ≤ CD(+)4 T lymphocyte count ≤ 500 cell/mm(3)) and group C (CD(+)4 T lymphocyte count > 500 cell/mm(3)). Periodontal indexes, including plaque index(PLI), bleeding index(BI), attachment level(AL) and probing depth(PD) were recorded.GCF samples were taken from 120 index teeth by means of sterile paper strips.GCF PGE2 levels were determined by radioimmunoassays. Mann-Whitney was used to compare the periodontal indexes and PGE2 levels among the three groups. Partial correlations and Spearman correlations were applied to analyze the correlation of CD(+)4 T lymphocytes count and PGE2 in gingival crevicular fluid with periodontal status. RESULTS: BI value, PGE2 concentration and total PGE2 were 3.00(2.00), 90.75(30.60) µg/L, 447.58 (243.08) pg in group B, which were higher than those in group A[2.00(1.25), 79.75(30.50) µg/L and 339.52 (200.97) pg respectively] and group C[2.00(1.00), 73.38 (14.83) µg/L and 299.18 (108.33) pg respectively] (P < 0.0167). But the differences of PD and AL among the three groups were not significantly different(P > 0.0167). The correlations were observed between CD(+)4 T lymphocyte count and BI for the subpopulations with CD(+)4 T lymphocyte count <200 cells/mm(3) (r = 0.657, P < 0.05) and between 200-500 cells/mm(3) (r = -0.369, P < 0.05). PGE2 concentration was negatively correlated with BI, PD and AL (P < 0.05), and total PGE2 was positively correlated with PD and AL(P < 0.05). CONCLUSIONS: There was an association between the periodontal status and CD(+)4 T lymphocyte count in HIV(+) patients.GCF PGE2 level was related to periodontal parameters including BI, PD and AL.