Retrograde axonal transport of poliovirus and EV71 in motor neurons.

Poliovirus (PV) can spread through neural pathway to the central nervous system and replicates in motor neurons, which leads to poliomyelitis. Enterovirus 71 (EV71), which is closely related to PV, is one of the causative agents of hand-foot-and-mouth disease and can cause severe neurological diseases similar to poliomyelitis. Since PV is similar to EV71 in its motor neurotoxicity, we tried to understand if the results obtained with PV are of general applicability to EV71 and other viruses with similar characteristics. Using microfluidic devices, we demonstrated that both PV capsid and the PV genome undergo axonal retrograde transport with human PV receptor (hPVR), and the transported virus replicated in the soma of hPVR-expressing motor neurons. Similar to PV in hPVR-transgenic (Tg) mice, neural pathway ensuring spreading of EV71 has been shown in adult human scavenger receptor class B, member 2 (hSCARB2)-Tg mice. We have validated this finding in microfluidic devices by showing that EV71 is retrogradely transported together with hSCARB2 to the cell body where it replicates in an hSCARB2-dependent manner.

A monolayer microfluidic device supporting mouse spermatogenesis with improved visibility.

In our previous study, we produced a microfluidic device (MFD) which successfully maintained spermatogenesis for over 6 months in mouse testis tissues loaded in the device. In the present study, we developed a new MFD, a monolayer device (ML-D) with a barrier structure consisting of pillars and slits, which is simpler in design and easier to make. This ML-D was also effective for inducing mouse spermatogenesis and maintained it for a longer period than the conventional culture method. In addition, we devised a way of introducing sample tissue into the device during its production, just before bonding the upper layer of polydimethylsiloxane (PDMS) and bottom glass slide. The tissue can obtain nutrients horizontally from the medium running beside it and oxygen vertically from above through PDMS. In addition, the glass slide set at the bottom improved the visibility of the sample tissue with an inverted microscope. When we took photos of cultured tissue of the Acr-Gfp transgenic mouse testis in ML-D sequentially every day, morphological changes of the acrosome during spermiogenesis were successfully recorded. The ML-D is simple in design and useful for culturing testis tissue for inducing and maintaining spermatogenesis with clearer visibility. Due to the new method of sample loading, tissues other than testis should also be applicable.

Neonatal testis growth recreated in vitro by two-dimensional organ spreading.

Organ culture experiments can be hampered by central degeneration or necrosis due to the inadequate permeation of oxygen and nutrients, which deteriorates the function and growth of cultured tissues. In the current study, we aimed to overcome this limitation of organ culture through spreading the tissue two dimensionally on an agarose gel stand and molding into a disc shape by placing a ceiling of polydimethylsiloxane (PDMS) chip, which is highly oxygen permeable. By this, every part of the tissue can receive a sufficient supply of oxygen through PDMS as well as nutrients through the agarose gel below. This method not only prevented central necrosis of tissues, but also supported the tissue growth over time. In addition, such growth, as volume enlargement, could be easily measured. Under these conditions, we examined the effect of several factors on the growth of neonatal mouse testis, and found that follicle stimulating hormone (FSH) and insulin significantly promoted the growth. These results are in good agreement with previous in vivo reports. Notably, the growth achieved over 7 days in our in vitro system is almost comparable to, about 80% of, that observed in vivo. Thus, we successfully monitored the promotion of tissue growth beyond the limits of the conventional organ culture method. This extremely simple method could offer a unique platform to evaluate the growth as well as functional properties of organs, not only the testis but also others as well.

Single-step CE for miniaturized and easy-to-use system.

We developed a novel single-step capillary electrophoresis (SSCE) scheme for miniaturized and easy to use system by using a microchannel chip, which was made from the hydrophilic material polymethyl methacrylate (PMMA), equipped with a capillary stop valve. Taking the surface tension property of liquids into consideration, the capillary effect was used to introduce liquids and control capillary stop valves in a partial barrier structure in the wall of the microchannel. Through the combined action of stop valves and air vents, both sample plug formation for electrophoresis and sample injection into a separation channel were successfully performed in a single step. To optimize SSCE, different stop valve structures were evaluated using actual microchannel chips and the finite element method with the level set method. A partial barrier structure at the bottom of the channel functioned efficiently as a stop valve. The stability of stop valve was confirmed by a shock test, which was performed by dropping the microchannel chip to a floor. Sample plug deformation could be reduced by minimizing the size of the side partial barrier. By dissolving hydroxyl ethyl cellulose and using it as the sample solution, the EOF and adsorption of the sample into the PMMA microchannel were successfully reduced. Using this method, a 100-bp DNA ladder was concentrated; good separation was observed within 1 min. At a separation length of 5 mm, the signal was approximately 20-fold higher than a signal of original sample solution by field-amplified sample stacking effect. All operations, including liquid introduction and sample separation, can be completed within 2 min by using the SSCE scheme.

Integration of a pump and an electrical sensor into a membrane-based PDMS microbioreactor for cell culture and drug testing.

To the extent possible, artificial organs should have characteristics that match those of the in vivo system. To this end, microfabrication techniques allow us to create microenvironments that can help maintain cell organization and functionality in in vitro cultures. We present three new microbioreactors, each of which allows cells to be cultured in a perfused microenvironment similar to that found in vivo. Our microbioreactors use new technology that permits integration onto the chip (35 mm × 20 mm) of an electrical sensor, in addition to one or more pumping systems and associated perfusion circuitry. The monitoring of Caco-2 cell cultures using electrical impedance spectroscopy (EIS) has allowed us to measure the effects of cell growth, cellular barrier formation and the presence of chemical compounds and/or toxins. Specifically, we have investigated the ability of the electrical sensor to maintain appropriate sensitivity and precision. Our results show that the sensor was very sensitive not only to the presence or the absence of the cells, but also to changes in cell state. Our perfused microbioreactors are highly efficient miniaturized tools that are easy to operate. We anticipate that they will offer promising new opportunities in many types of cell culture research, including drug screening and tissue engineering.

Spontaneous formation of stably-attached and 3D-organized hepatocyte aggregates on oxygen-permeable polydimethylsiloxane membranes having 3D microstructures.

In order to enhance the viability and the differentiated functions of primary hepatocytes in cultures, it appears important to have them organized within a three-dimensional (3D) structure which promotes extensive cell-cell contacts, but also to be adequately supplied with oxygen. Here, we report a simple methodology satisfying these two fundamental but sometimes conflicting issues: primary rat hepatocytes were cultured on polydimethylsiloxane (PDMS) membranes with 3D-pillared microstructures with various dimensions, so that the cells could organize themselves around the pillars into various kinds of 3D multicellular aggregates, while being continuously supplied with oxygen by diffusion through the PDMS membrane. As expected, under such conditions, hepatocyte cultures exhibited higher albumin secretion and urea synthesis rates. It appeared then that as the spacing decreased between the pillars, the cells were more stably organized into smaller spherical aggregates and displayed the highest albumin secretion rates. Such a simple design is likely to be included in a new drug/chemical screening system in a practical microplate format, but also appears applicable to microfluidic devices.

Enhanced effects of secreted soluble factor preserve better pluripotent state of embryonic stem cell culture in a membrane-based compartmentalized micro-bioreactor.

Pluripotent stem cells are under the influence of soluble factors in a diffusion dominant in vivo microenvironment. In order to investigate the effects of secreted soluble factors on embryonic stem cell (ESC) behavior in a diffusion dominant microenvironment, we cultured mouse ESCs (mESCs) in a membrane-based two-chambered micro-bioreactor (MB). To avoid disturbing the cellular environment in the top chamber of the MB, only the culture medium of the bottom chamber was exchanged. Cell growth in the MB after 5 days of culture was similar to that in conventional 6-well plate (6-WP) and membrane-based Transwell insert (TW) cultures, indicating adequate nutrient supply in the MB. However, the cells retained higher expression of pluripotency markers (Oct4, Sox2 and Rex1) and secreted soluble factors (FGF4 and BMP4) in the MB. Inhibition of FGF4 activity in the MB and TW resulted in a similar cellular response. However, in contrast to the TW, inhibition of BMP4 activity revealed that autocrine action of the upregulated BMP4, which acted cooperatively with leukemia inhibitory factor (LIF), upregulated the pluripotency markers expression in the MB culture. We propose that BMP4 accumulated in the diffusion dominant microenvironment of the MB upregulated its own expression by a positive feedback mechanism-in contrast to the macro-scale culture systems-thereby enhancing the pluripotency of mESCs. The micro-scale culture platform developed in this study enables the investigation of the effects of soluble factors on ESCs in a diffusion dominant microenvironment, and is expected to be used to modulate the ESC fate choices.

Three-Dimensional Motor Nerve Organoid Generation.

A fascicle of axons is one of the major structural motifs observed in the nervous system. Disruption of axon fascicles could cause developmental and neurodegenerative diseases. Although numerous studies of axons have been conducted, our understanding of formation and dysfunction of axon fascicles is still limited due to the lack of robust three-dimensional in vitro models. Here, we describe a step-by-step protocol for the rapid generation of a motor nerve organoid (MNO) from human induced pluripotent stem (iPS) cells in a microfluidic-based tissue culture chip. First, fabrication of chips used for the method is described. From human iPS cells, a motor neuron spheroid (MNS) is formed. Next, the differentiated MNS is transferred into the chip. Thereafter, axons spontaneously grow out of the spheroid and assemble into a fascicle within a microchannel equipped in the chip, which generates an MNO tissue carrying a bundle of axons extended from the spheroid. For the downstream analysis, MNOs can be taken out of the chip to be fixed for morphological analyses or dissected for biochemical analyses, as well as calcium imaging and multi-electrode array recordings. MNOs generated with this protocol can facilitate drug testing and screening and can contribute to understanding of mechanisms underlying development and diseases of axon fascicles.

A micropatterned cell array with an integrated oxygen-sensitive fluorescent membrane.

We propose a simple method for producing micropatterned cell spots by photocatalytic lithography on a Pt porphyrin-based oxygen-sensitive polystyrene membrane that enables real-time imaging of oxygen consumption of patterned cell spots with sub-millimetre resolution.

Stable immobilization of rat hepatocytes as hemispheroids onto collagen-conjugated poly-dimethylsiloxane (PDMS) surfaces: importance of direct oxygenation through PDMS for both formation and function.

The highly oxygen-permeable material, poly-dimethylsiloxane (PDMS), has the potential to be applied to cell culture microdevices, but cell detachment from PDMS has been a major problem. In this study, we demonstrate that a combination of collagen covalently immobilized PDMS and an adequate oxygen supply enables the establishment of a stable, attached spheroid (hemispheroid) culture of rat hepatocytes. The bottom PDMS surfaces were first treated with oxygen plasma, then coupled with aminosilane followed by a photoreactive crosslinker, and they were finally reacted with a collagen solution. X-ray photoelectron spectroscopy (XPS) and contact angle measurements showed that the covalent immobilization of collagen on the surface occurred only where the crosslinker had been introduced. On the collagen-conjugated PDMS surface, rat hepatocytes organized themselves into hemispheroids and maintained the viability and a remarkably high albumin production at least for 2 weeks of culture. In contrast, hepatocytes on the other types of PDMS surfaces formed suspended spheroids that had low albumin production. In addition, we showed that blocking the oxygen supply through the bottom PDMS surface inhibited the formation of hemispheroids and the augmentation of hepatocellular function. These results show that appropriate surface modification of PDMS is a promising approach towards the development of liver tissue microdevices.

Enhanced maintenance and functions of rat hepatocytes induced by combination of on-site oxygenation and coculture with fibroblasts.

In in vivo liver tissue, each hepatocyte has intimate interactions not only with adjacent hepatocytes but also with nonparenchymal cells in a three-dimensional (3D) manner. We recently reported that hepatic function is highly maintained on collagen covalently immobilized poly-dimethylsiloxane (PDMS) membranes through which oxygen is supplied directly to the cells. In this study, to further enhance performances of hepatocytes culture, we investigated cocultivation of rat hepatocytes with a mouse fibroblast, NIH/3T3 (3T3) in the same PDMS membranes. Various functions of hepatocytes were better maintained on the membrane at remarkably higher levels, particularly albumin secretion on such coculture was about 20 times higher than that in conventional coculture on tissue-culture-treated polystyrene (TCPS) surfaces. The remarkable functional enhancements are likely to be explained by the net growth of hepatocytes (from 1.2- to 1.4-fold inoculated number) and very intimate contact between hepatocytes and 3T3 cells in almost continuous double-layered structures under the adequate oxygen supply. The results demonstrate that simultaneous realization of different requirements toward mimicking in vivo liver tissue microstructure is effective in improving performance of hepatocytes culture system.

Evaluation of cell-free protein synthesis using PDMS-based microreactor arrays.

A living cell has numerous proteins, only a few thousand of which have been identified to date. Cell-free protein synthesis is a useful and promising technique to discover and produce various proteins that might be beneficial for biotechnological, pharmaceutical, and medical applications. For this study, we evaluated the performance and the general applicability of our previously developed microreactor array chip to cell-free protein synthesis by comparisons with a commercially available system. The microreactor array chip comprises a temperature control chip made of glass and a disposable reaction chamber chip made of polydimethylsiloxane (PDMS). For evaluation of the microreactor array chip, rat adipose-type fatty acid binding protein, glyceraldehyde-3-phosphate dehydrogenase, cyclophilin, and firefly luciferase were synthesized from their respective DNA templates using a cell-free extract prepared from Escherichia coli. All these proteins were synthesized in the microreactor array chip, and their respective amounts and yields were investigated quantitatively.

Dual stimuli-responsive smart beads that allow "on-off" manipulation of cancer cells.

Temperature- and electric field-responsive polymer-conjugated polystyrene beads, termed smart beads, are designed to isolate cancer cells. In smart beads, the reversible "on-off" antigen-antibody reaction and dielectrophoresis force on an electrode are accomplished to realize "on-off" remote manipulation of smart beads and cancer cells. Both the zeta-potential and the hydrodynamic diameter of the smart beads are sensitive to temperature, allowing "on-off" reversible capture and release of cancer cells. Cancer cell-captured smart beads are then localized on electrodes by applying an electrical signal.

A novel effect of parylene-based surface coating on HepG2 cell function.

Parylene-C (diX C) has been used as a surface coating material with many biological applications; diX AM, a member of the diX C parylene family, retains biocompatible features. Previously, it has been reported that diX AM shows high cell adhesiveness; however, the effect of diX AM on the function of cells remains unknown. In this study, we investigated cell morphology and gene expression in human hepatocellular carcinoma (HepG2) cells cultured on diX AM. Our results show that HepG2 cells adhered to the surface of diX AM, and retained morphology similar to that of the cells cultured on collagen-coated surfaces. Furthermore, microarray analysis has revealed that the expression of CYP1A1 and CYP1A2 was highly induced in HepG2 cells cultured on diX AM without any additional factors. Moreover, CYP1 enzymatic activity measured by ethoxyresorufin-O-dealkylase (EROD) assay corresponded with the induction of gene expression. These results indicate a novel effect of diX AM on HepG2 cell function for the first time and diX AM could be used as non-animal-derived material for cell culture.

A plug and play microfluidic device.

Chip-to-world interface is a major issue in the field of microfluidics and its applications. We developed a plug and play microfluidic device composed of a fluid driving unit and a polymer chip containing microfluidic channels and reservoirs. The one and only connection of the device to the external world is a set of electric control lines for the driving unit. Just putting the reagents and samples onto the reservoirs, the chip can be operated for chemical or biochemical reaction and analysis. We demonstrate here that silicon-based micropumps embedded in the present device allow us to achieve flexible fluidic manipulations with minimum time delay and dead volume.

Microfluidic PDMS (polydimethylsiloxane) bioreactor for large-scale culture of hepatocytes.

Microfluidics could provide suitable environments for cell culture because of the larger surface-to-volume ratio and fluidic behavior similar to the environments in vivo. Such microfluidic environments are now used to investigate cell-to-cell interactions and behaviors in vitro, emulating situations observed in vivo, for example, microscale blood vessels modeled by microfluidic channels. These emulated situations cannot be realized by conventional technologies. In our previous works, microfluidic channels composed of two PDMS (poly(dimethylsiloxane)) layers were successfully used for Hep G2 cell culture. To achieve physiologically meaningful functions in vitro, a culture with a larger number of cells and higher density must be performed. This will require bioreactors with larger surface areas for cell attachment and sufficient amounts of oxygen and nutrition supply. For those purposes, we fabricated a bioreactor by stacking 10 PDMS layers together, i.e., four cell culture chambers, and a chamber dedicated to the oxygen supply inserted in the middle of the 10-stacked layers. The oxygen supply chamber is separated from the microfluidic channels for the culture medium perfusion by thin 300-microm PDMS walls. The high gas permeability of PDMS allows oxygen supply to the microfluidic channels through the thin walls. On the basis of the measurement of glucose consumption and albumin production, it is shown that cellular activity exhibits a gradual increase and saturation throughout the culture. We clearly observed that in the case of the microfluidic bioreactor for large-scale cultures, the oxygen chamber is indispensable to achieve longer and healthy cultures. In the present bioreactor, the cell density was found to be about 3-4 x 10(7) cells/cm(3), which is in the same order of magnitude as the conventional macroscale bioreactors. Consequently, by stacking single culture chambers and oxygen chambers in between, we could have a scalable method to realize the microfluidic bioreactor for large-scale cultures.

Image-based evaluations of distribution and cytotoxicity of Irinotecan (CPT-11) in a multi-compartment micro-cell coculture device.

We recently developed a polydimethylsiloxane (PDMS)-based three-compartment microfluidic cocultivation device enabling real-time interactions of different cell populations as an advanced physiologically-relevant cell-based assay. This device had valves and small magnetic stirrer-based internal pumps for easy and flexible perfusion operations. In this study, we applied this device for the evaluation of Irinotecan (CPT-11) toxicity to the lung, because it is detoxified by the liver and accumulated in the fat in humans. We successfully cultured representative three different tissue model cells in each compartment under the individual culture conditions and also in entire perfusion. Growth inhibition of rat lung epithelial cell line L-2, was measured when administered with 50 µM CPT-11 under various cocultivation conditions with respect to the presences and absence of primary rat hepatocytes (liver tissue model) and adipocyte-like cells (fat tissue model) induced from a mouse fibroblast cell line, 3T3-L1. Although CPT-11 showed moderate toxicity to the pure culture of L-2 cells in the device after 72 h of perfusion culture, this was lowered mainly in the presence of the liver tissue. Inhibition of the L-2 cell growth agreed with the area under curve (AUC) values obtained from fluorescent image-based analyses in each compartment. These results demonstrate that developed simple and flexible microfluidic cocultivation device, with appropriate image-based analyses, can be used in evaluating toxicokinetic behaviors of drug candidates in systemic levels.

Combination of microwell structures and direct oxygenation enables efficient and size-regulated aggregate formation of an insulin-secreting pancreatic ß-cell line.

Spherical three-dimensional (3D) cellular aggregates are valuable for various applications such as regenerative medicine or cell-based assays due to their stable and high functionality. However, previous methods to form aggregates have shown drawbacks, being labor-intensive, showing low productivity per unit area or volume and difficulty to form homogeneous aggregates. We proposed a novel strategy based on oxygen-permeable polydimethylsiloxane (PDMS) honeycomb microwell sheets, which can theoretically supply about 80 times as much oxygen as conventional polystyrene culture dishes, to produce recoverable aggregates in controllable sizes using mouse insulinoma cells (MIN6-m9). In 48 hours of culture, the PDMS sheets produced aggregates whose diameters were strictly controlled (≃32, 60, 90, 150 and 280 mm) even at an inoculum density eight times higher (8.0×105 cells/cm(2) ) than that of normal confluent monolayers (1.0×105 cells/cm(2) ). Measurement of the oxygen tension near the cell layer and glucose/lactate analysis clearly showed that cells exhibit aerobic respiration on the PDMS-based culture system. Glucose-responsive insulin secretion of the recovered aggregates showed that the aggregates around 90 mm in diameter secreted the largest amounts of insulin. This confirmed the advantages of 3D cellular organization and the existence of a suitable aggregate size, above which excess organization leads to a decreased metabolic response. These results demonstrated that this microwell-based PDMS culture system provides a promising method to form size-regulated and better functioning 3D cellular aggregates of various kinds of cells with a high yield per surface area.

Predator-prey molecular ecosystems.

Biological organisms use intricate networks of chemical reactions to control molecular processes and spatiotemporal organization. In turn, these living systems are embedded in self-organized structures of larger scales, for example, ecosystems. Synthetic in vitro efforts have reproduced the architectures and behaviors of simple cellular circuits. However, because all these systems share the same dynamic foundations, a generalized molecular programming strategy should also support complex collective behaviors, as seen, for example, in animal populations. We report here the bottom-up assembly of chemical systems that reproduce in vitro the specific dynamics of ecological communities. We experimentally observed unprecedented molecular behaviors, including predator-prey oscillations, competition-induced chaos, and symbiotic synchronization. These synthetic systems are tailored through a novel, compact, and versatile design strategy, leveraging the programmability of DNA interactions under the precise control of enzymatic catalysis. Such self-organizing assemblies will foster a better appreciation of the molecular origins of biological complexity and may also serve to orchestrate complex collective operations of molecular agents in technological applications.

Direct oxygen supply with polydimethylsiloxane (PDMS) membranes induces a spontaneous organization of thick heterogeneous liver tissues from rat fetal liver cells in vitro.

Oxygen is a vital nutrient for growth and maturation of in vitro cells (e.g., adult hepatocytes). We previously demonstrated that direct oxygenation through a polydimethylsiloxane (PDMS) membrane increases the oxygen supply to cell cultures and improves hepatocyte functions. In this study, we removed limits on oxygen supply to fetal rat liver cells through the use of direct oxygenation through a PDMS membrane to investigate in vitro growth and maturation. We chose fetal liver cells because they are considered a feasible source of liver progenitor cells for regenerative medicine therapy due to their highly efficient maturation and proliferation. Cells from 17-day-old pregnant rats were cultured under 5% and 21% oxygen atmospheres. Some cells were first cultured under 5% oxygen, and then switched to a 21% oxygen atmosphere. When oxygen supply was enhanced by a PDMS membrane, the rat fetal liver cells organized into a complex tissue composed of an epithelium of hepatocytes above a mesenchyme-like tissue. The thickness of this supportive tissue was directly correlated to oxygen concentration and was thicker under 5% oxygen. When cultures were switched from 5% to 21% oxygen, lumen-containing structures were formed in the thick mesenchymal-like tissue and the albumin secretion rate increased. In addition, cells adapted their glycolytic activity to the oxygen concentrations. This system promoted the formation of a functional and organized thick tissue suitable for use in regenerative medicine.