Spectrophotometric analysis of discoloration and internal bleaching after use of different antibiotic pastes.

OBJECTIVES: To investigate teeth's antibiotic-induced color differences after bleaching using two different techniques. MATERIALS AND METHODS: One hundred twenty extracted maxillar human incisors were examined. The specimens were randomly divided into six groups, each receiving one of six antibiotic paste fillings: (1) triple antibiotic paste (TAP) with minocycline, (2) double antibiotic paste (DAP), (3) TAP with amoxicillin, (4) TAP with cefaclor, (5) TAP with doxycycline, and (6) no filling (control group). Spectrophotometric measurements were obtained at baseline and then during the first, second, and third weeks after paste placement. The specimens discolored by antibiotics pastes were randomly divided into two subgroups: (1) internal bleaching with hydrogen peroxide (H2O2) and (2) internal bleaching with H2O2 plus Nd-YAG laser irradiation. The ∆E value was calculated and analyzed using a two-way analysis of variance and post-hoc Tukey's test (α = 0.05). RESULTS: The ∆E for all groups showed color differences exceeding the perceptibility threshold (∆E Ëƒ 3.7) at all time points except in the control and DAP groups. Minocycline-induced TAP showed the most severe coronal discoloration (32.42). When the ∆E was examined, thermo/photo bleaching (22.01 ± 8.23) caused more bleaching than walking bleaching (19.73 ± 5.73) at every time point (P = 0.19). No group returned to the original color after bleaching (P < 0.05). CONCLUSIONS: Except for DAP, all antibiotic pastes caused discoloration. Internal bleaching with Nd-YAG laser can be useful for bleaching/removing this discoloration. CLINICAL RELEVANCE: For clinically successful final appearances, understanding the effects of bleaching procedures on antibiotic paste discoloration is important.

Evaluation of the preventive efficacy of three dentin tubule occlusion methods against discoloration caused by triple-antibiotic paste.

The aim of this in vitro study was to evaluate the preventive efficacy of three dentin tubule occlusion methods against discoloration caused by triple-antibiotic paste (TAP). Sixty extracted human incisors were sectioned, and the access was opened. The specimens were randomly allocated to the following four groups (n = 15): bonding application (BD), teethmate desensitizer (TM), Nd:YAG laser application (LS), and no surface treatment (control, C). Specimens were discolored with TAP over a period of 3 weeks. The color was measured by spectrophotometry at two time-points: initially and after 3 weeks of TAP placement. Color differences (∆E) were calculated and analyzed. Discoloration was visually noticed in all teeth after 3 weeks. The differences between the control group and the three dentin tubule occlusion methods were statistically significant (p < 0.05); however, there were no statistically significant differences among the BD, TM, and LS groups (p > 0.05).

The effect of different acidic irrigation solutions on the pushout bond strength of root canal filling.

Background: This study investigated the effects of different acidic solutions used as the final irrigation on the push-out bond strength (PBS) of resin-based and bioceramic-based root canal sealers. Methods: 100 single root and canal human incisors were selected and decorated. Root canal shaping was done with ProTaper Next rotary files up to X4 and rinsed with 5 mL of 5.25% NaOCl between each file. Then, teeth were divided into five main groups according to the final irrigation (n=20). Group 1: glycolic acid; Group 2: phosphoric acid; Group 3: citric acid; Group 4: EDTA and group 5: saline. Then, each group was divided into two subgroups according to the canal sealer used (n=10). The groups filled with bioceramic-based sealer (bioserra) were named A, and the groups filled with resin-based sealer (AH Plus) were called B. PBS test was applied to one of the two samples obtained from the coronal third of each root. The data were statistically analyzed using a two-way analysis of variance and Tukey's HSD test (α=0.05). Results: Statistically, the highest PBS value was obtained in group 2A (4.81±0.03 MPa), which was irrigated with phosphoric acid and filled with bioserra, and the lowest PBS value was obtained in group 5B (1.10±0,03), which was irrigated with saline and filled with AH Plus (P<0.05). There was a statistical difference between all groups except group 1A and group 3A (P<0.05). Conclusion: The bioceramic-based root canal sealer (bioserra) bond strength is superior to resin-based (AH Plus). Phosphoric acid, glycolic acid, and citric acid can be an alternative to EDTA.

Effect of ultrasonic and Nd: Yag laser activation on irrigants on the push-out bond strength of fiber post to the root canal.

OBJECTIVE: This in vitro study aimed to compare the efficacy of irrigants using various irrigation activation methods to the push-out bond strengths of fiber post to root canal luted with self-adhesive resin cement (SARC). METHODOLOGY: Forty-eight decoronated human canines were used. The specimens were divided into four groups corresponding with the post-space irrigation process and were treated as follows: distilled water (DW) (Control) group received 15 mL of DW; sodium hypochlorite (NaOCl)+ethylenediaminetetraacetic acid (EDTA) group was treated with 5 mL of 5.25% NaOCl, 5 mL of 17% EDTA, and 5 mL of DW; passive ultrasonic irrigation (PUI) group was treated with 5 mL of 5.25% NaOCl, 5 mL of 17% EDTA, and 5 mL of DW, and each irrigant was agitated with an ultrasonic file; and laser activated irrigation (LAI) group was treated with 5 mL of 5.25% NaOCl, 5 mL of 17% EDTA, and 5 mL of DW, and each irrigant was irradiated with Nd: YAG laser. Fiber posts were luted with SARC, and a push-out test was performed. Data was analyzed using one-way analysis of variance and Tukey HSD test. RESULTS: The bond strength values for the groups obtained were as follows: Control (10.04 MPa), NaOCl+EDTA (11.07 MPa), PUI (11.85 MPa), and LAI (11.63 MPa). No statistically significant differences were found among all experimental groups (p>0.05). The coronal (12.66 MPa) and middle (11.63 MPa) root regions indicated a significantly higher bond strength compared with the apical (9.16 MPa) region (p<0.05). CONCLUSIONS: Irrigant activation methods did not increase the bond strength of fiber post to canal.

Comparison of newly formed microcracks after instrumentation using protaper next, reciproc and self-adjusting file systems.

PURPOSE: The purpose of the present study is to assess the rate of newly formed microcracks comparatively during root canal instrumentation by using ProTaper Next, Reciproc, and Self-Adjusting File systems using micro-computed tomography. SUBJECTS AND METHODS: Thirty mesial roots of mandibular molars were randomly assigned to 3 experimental groups (n = 10) as follows, ProTaper Next, Reciproc and Self-Adjusting File system. Preoperative and postoperative scans were obtained at the isotropic resolution of 13.68 µm. Cross-section images were examined to identify the presence of newly formed dentinal microcracks. RESULTS: The Self-Adjusting File and Reciproc systems caused a higher rate of new microcrack formation than the ProTaper Next group (p<0.001). There were also significant differences in the new microcrack formation between Reciproc and Self-Adjusting File groups (p<0.001). CONCLUSION: Reciproc and Self-Adjusting File systems caused a higher rate of newly formed microcraks compared to ProTaper Next system.

Effect of ultrasonic and Nd: Yag laser activation on irrigants on the push-out bond strength of fiber post to the root canal

Abstract Objective: This in vitro study aimed to compare the efficacy of irrigants using various irrigation activation methods to the push-out bond strengths of fiber post to root canal luted with self-adhesive resin cement (SARC). Methodology: Forty-eight decoronated human canines were used. The specimens were divided into four groups corresponding with the post-space irrigation process and were treated as follows: distilled water (DW) (Control) group received 15 mL of DW; sodium hypochlorite (NaOCl)+ethylenediaminetetraacetic acid (EDTA) group was treated with 5 mL of 5.25% NaOCl, 5 mL of 17% EDTA, and 5 mL of DW; passive ultrasonic irrigation (PUI) group was treated with 5 mL of 5.25% NaOCl, 5 mL of 17% EDTA, and 5 mL of DW, and each irrigant was agitated with an ultrasonic file; and laser activated irrigation (LAI) group was treated with 5 mL of 5.25% NaOCl, 5 mL of 17% EDTA, and 5 mL of DW, and each irrigant was irradiated with Nd: YAG laser. Fiber posts were luted with SARC, and a push-out test was performed. Data was analyzed using one-way analysis of variance and Tukey HSD test. Results: The bond strength values for the groups obtained were as follows: Control (10.04 MPa), NaOCl+EDTA (11.07 MPa), PUI (11.85 MPa), and LAI (11.63 MPa). No statistically significant differences were found among all experimental groups (p>0.05). The coronal (12.66 MPa) and middle (11.63 MPa) root regions indicated a significantly higher bond strength compared with the apical (9.16 MPa) region (p<0.05). Conclusions: Irrigant activation methods did not increase the bond strength of fiber post to canal.

Effects of an Antioxidant on the Shear Bond Strengths of Orthodontic Brackets After Conventional and Laser-Assisted Extra-Coronal Bleaching / Efecto de un antioxidante sobre la fuerza de unión de brackets de ortodoncia posterior al blanqueamiento convencional y asistido por láser

RESUMEN El objetivo del presente estudio fue evaluar los efectos de la aplicación de un antioxidante sobre las fuerzas de unión (SBS) de brackets de ortodoncia posterior al blanqueamiento con peróxido de hidrógeno (HP). Metodología: Cincuenta premolares recién extraídos se dividieron aleatoriamente en tres grupos. El Grupo 1 se trató con 40% de HP (n=20), el grupo 2 con 40% de HP y se activó con láser de Nd: YAG (n=20) y un grupo de control (Grupo 3) no recibió tratamiento (n=10). Después del blanqueamiento, los Grupos 1 y 2 se dividieron en dos subgrupos (Grupo 1a, Grupo 1b, Grupo 2a y Grupo 2b). Las muestras en los subgrupos 1a y 2a (n=10) no recibieron ninguna aplicación del antioxidante. Se aplicó una solución de ascorbato de sodio al 10% a las muestras en los Grupos 1b y 2b (n=10). Luego, los brackets se adherieron a las superficies de esmalte de todos los grupos experimentales. Las muestras se sometieron a pruebas de SBS y los datos analizados estadisticamente. Resultados: La fuerza de unión de los grupos 1 y 2 fue significativamente más baja que el grupo de control (p <0.001); sin embargo, no se observaron diferencias estadísticamente significativas en SBS entre los grupos 1 y 2 (p>0.001). Las muestras tratadas con antioxidantes de los grupos 1b y 2b fueron significativamente mayores que las de los grupos 1a y 2a (p <0,001). Conclusion: La aplicación de 40% HP tuvo un efecto negativo en la resistencia de unión de los brackets. El uso de antioxidante durante 15 minutos mejoró significativamente la SBS.

ABSTRACT Purpose: The purpose of this study was to evaluate the effects of the application of antioxidant on the shear bond strengths (SBS) of orthodontic brackets bonded to human enamel after extra-coronal bleaching with hydrogen peroxide (HP). Materials and methods: Fifty freshly extracted premolars were randomly divided into three groups. One group (Group 1) was bleached with 40% HP (n=20), another group (Group 2) was bleached with 40% HP and activated with an Nd: YAG laser (n=20), and a control group (Group 3) received no treatment (n=10). After the bleaching procedure, Groups 1 and 2 were further divided into two subgroups (Group 1a, Group 1b, Group 2a, and Group 2b). Specimens in Groups 1a and 2a (n=10) received no antioxidant application. A 10% sodium ascorbate solution was applied to specimens in Groups 1b and 2b (n=10). The brackets were then bonded with light-cure adhesive paste to the enamel surfaces of all experimental groups. Specimens were subjected to SBS tests for debonding. Results: The SBS of brackets bonded in Groups 1 and 2 were significantly lower than those of brackets bonded to the control group (p<0.001); however, no statistically significant differences in SBS were noted in Groups 1 and 2 (p>0.001). The antioxidant-treated SBS of brackets in Groups 1b and 2b were significantly higher than those of Groups 1a and 2a (p<0.001). Conclusions: The application of 40% HP had a negative effect on the bond strength. The use of antioxidant for 15 min resulted in the reversal of failed bond strength.