Hybrid Polystyrene-Plasmonic Systems as High Binding Density Biosensing Platforms.

Sensitive, accurate, and early detection of biomarkers is essential for prompt response to medical decisions for saving lives. Some infectious diseases are deadly even in small quantities and require early detection for patients and public health. The scarcity of these biomarkers necessitates signal amplification before diagnosis. Recently, we demonstrated single-molecule-level detection of tuberculosis biomarker, lipoarabinomannan, from patient urine using silver plasmonic gratings with thin plasma-activated alumina. While powerful, biomarker binding density was limited by the surface density of plasma-activated carbonyl groups, that degraded quickly, resulting in immediate use requirement after plasma activation. Therefore, development of stable high density binding surfaces such as high binding polystyrene is essential to improving shelf-life, reducing binding protocol complexity, and expanding to a wider range of applications. However, any layers topping the plasmonic grating must be ultra-thin (<10 nm) for the plasmonic enhancement of adjacent signals. Furthermore, fabricating thin polystyrene layers over alumina is nontrivial because of poor adhesion between polystyrene and alumina. Herein, we present the development of a stable, ultra-thin polystyrene layer on the gratings, which demonstrated 63.8 times brighter fluorescence compared to commercial polystyrene wellplates. Spike protein was examined for COVID-19 demonstrating the single-molecule counting capability of the hybrid polystyrene-plasmonic gratings.

Ultra-rapid elimination of biofilms via the combustion of a nanoenergetic coating.

BACKGROUND: Biofilms occur on a wide variety of surfaces including metals, ceramics, glass etc. and often leads to accumulation of large number of various microorganisms on the surfaces. This biofilm growth is highly undesirable in most cases as biofilms can cause degradation of the instruments and its performance along with contamination of the samples being processed in those systems. The current "offline" biofilm removal methods are effective but labor intensive and generates waste streams that are toxic to be directly disposed. We present here a novel process that uses nano-energetic materials to eliminate biofilms in < 1 second. The process involves spray-coating a thin layer of nano-energetic material on top of the biofilm, allowing it to dry, and igniting the dried coating to incinerate the biofilm. RESULTS: The nanoenergetic material is a mixture of aluminum (Al) nanoparticles dispersed in a THV-220A (fluoropolymer oxidizer) matrix. Upon ignition, the Al nanoparticles react with THV-220A exothermically, producing high temperatures (>2500 K) for an extremely brief period (~100 ms) that destroys the biofilm underneath. However, since the total amount of heat produced is low (~0.1 kJ/cm2), the underlying surface remains undamaged. Surfaces with biofilms of Pseudomonas aeruginosa initially harboring ~ 10(7) CFU of bacteria /cm2 displayed final counts of less than 5 CFU/cm2 after being subjected to our process. The byproducts of the process consist only of washable carbonaceous residue and gases, making this process potentially inexpensive due to low toxic-waste disposal costs. CONCLUSIONS: This novel method of biofilm removal is currently in the early stage of development. However, it has potential to be used in offline biofilm elimination as a rapid, easy and environmentally friendly method.

A comparative evaluation of microarray slides as substrates for the development of protease assay biosensors.

The application of commercially available microarray slides as substrates for fluorogenic protease assays has been explored in terms of binding efficiency, stability, and activity. A fluorescent, biotinylated substrate for botulinum neurotoxin A (BoNTA) was attached via self-assembled monolayer of Streptavidin to amine-reactive aldehyde, epoxy, hydrogel, and polymer slides. Nexterion Slide P® was found to have optimal protein binding efficiency and stability of the slides examined. Addition of glycerol to the printing buffer improved spot morphology significantly and polyvinylpyrrolidone provided long-term stability, allowing chips to be stored for up to 1 month with good viability. Detection of a recombinant BoNTA light chain was then carried out at 37°C and a sub-lethal dose was detected in 2 hours.

Detection of nitroaromatic explosives using a fluorescent-labeled imprinted polymer.

Optical sensors have proven to be a useful method in identifying explosive devices by recognizing vapors of explosive compounds that become airborne and emanate from the device. To detect high explosive compounds such as TNT, a molecularly imprinted polymer (MIP) sensing mechanism was developed. This mechanism consists of MIP microparticles prepared using methacrylic acid as the functional monomer. The MIP microparticles are then combined with fluorescent quantum dots via a simple cross-linking procedure. The result is a highly robust optical sensing scheme that is capable of functioning in an array of environmental conditions. To study the sensing mechanisms's ability to detect nitroaromatic analytes, the fluorescent-labeled MIP particles were tested for their performance in detecting aqueous 2,4-dinitrotoluene (DNT), a nitroaromatic molecule very similar to TNT, as well as TNT itself. These preliminary data indicate that the system is capable of detecting nitroaromatic compounds in solution with high sensitivity, achieving lower limits of detection of 30.1 and 40.7 microM for DNT and TNT, respectively. The detection mechanism also acted rapidly, with response times as low as 1 min for TNT. Due to the results of this study, it can be concluded that the fluorescent-labeled MIP system is a feasible method for detecting high explosives, with the potential for future use in detecting vapors from explosive devices.

Linear Polyethylenimine-DNA Nanoconstruct for Corneal Gene Delivery.

PURPOSE: This study investigated the efficiency and potential toxicity of a linear 22-kDa polyethylenimine (PEI)-DNA nanoconstruct for delivering genes to corneal cells and the effects of PEI nitrogen-to-DNA phosphate (N:P) ratio on gene transfer efficiency in vitro and in vivo. METHODS: A gel retardation assay, zeta potential measurement, bright-field microscopy, transfection with green fluorescent protein (GFP), immunofluorescence, and enzyme-linked immunosorbent assay (ELISA) were used to characterize the physicochemical and biological properties and 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide (MTT), lactate dehydrogenase (LDH), and reactive oxygen species (ROS) assay for cytotoxicity of the linear PEI-DNA nanoconstruct using in vitro cultured primary human corneal fibroblast and in vivo mouse models. RESULTS: Of the several evaluated N:P ratios, the highest gene transfection efficiency achieved without any notable cytotoxicity was observed at an N:P ratio of 30:1 (N:P 30). In vivo gene transfer studies revealed substantial GFP gene delivery into the corneas of mice 3 days after a single 5-min topical application without any significant adverse ocular effects. Slit-lamp biomicroscope ophthalmic examination of the mouse exposed to the linear PEI-DNA nanoconstruct showed no evidence of hyperemia (redness), corneal edema, ocular inflammation, or epiphora (excessive tearing). CONCLUSIONS: The 22-kDa linear PEI-DNA nanoconstruct is an efficient and well-tolerated vector for corneal gene therapy in vitro and in vivo and could be used as a platform for developing novel gene-based nanomedicine approaches for corneal diseases.

Coatings and surface modifications imparting antimicrobial activity to orthopedic implants.

Bacterial colonization and biofilm formation on an orthopedic implant surface is one of the worst possible outcomes of orthopedic intervention in terms of both patient prognosis and healthcare costs. Making the problem even more vexing is the fact that infections are often caused by events beyond the control of the operating surgeon and may manifest weeks to months after the initial surgery. Herein, we review the costs and consequences of implant infection as well as the methods of prevention and management. In particular, we focus on coatings and other forms of implant surface modification in a manner that imparts some antimicrobial benefit to the implant device. Such coatings can be classified generally based on their mode of action: surface adhesion prevention, bactericidal, antimicrobial-eluting, osseointegration promotion, and combinations of the above. Despite several advances in the efficacy of these antimicrobial methods, a remaining major challenge is ensuring retention of the antimicrobial activity over a period of months to years postoperation, an issue that has so far been inadequately addressed. Finally, we provide an overview of additional figures of merit that will determine whether a given antimicrobial surface modification warrants adoption for clinical use.

Comparison of molecular imprinted particles prepared using precipitation polymerization in water and chloroform for fluorescent detection of nitroaromatics.

A comparative study was conducted to study the effects that two different polymerization solvents would have on the properties of imprinted polymer microparticles prepared using precipitation polymerization. Microparticles prepared in chloroform, which previous results indicated was the optimal solvent for molecular imprinting of nitroaromatic explosive compounds, were compared to water, which was hypothesized to decrease water swelling of the polymer and allow enhanced rebinding of aqueous template. The microparticles were characterized and were integrated into a fluorescence sensing mechanism for detection of nitroaromatic explosive compounds. The performance of the sensing mechanisms was compared to illustrate which polymerization solvent produced optimal imprinted polymer microparticles for detection of nitroaromatic molecules. Results indicated that the structures of microparticles synthesized in chloroform versus water varied greatly. Sensor performance studies showed that the microparticles prepared in chloroform had greater imprinting efficiency and higher template rebinding than those prepared in water. For detection of 2,4,6-trinitrotoluene, the chloroform-based fluorescent microparticles achieved a lower limit of detection of 0.1 µM, as compared to 100 µM for the water-based fluorescent microparticles. Detection limits for 2,4-dinitrotoluene, as well as time response studies, also demonstrated that the chloroform-based particles are more effective for detection of nitroaromatic compounds than water-based particles. These results illustrate that the enhanced chemical properties of using the experimentally determined optimal polymerization solvent overcome deformation of imprinted binding sites by water swelling and benefits of using the polymerization solvent for rebinding of the template.

Preferential cell attachment to nitrogen-doped diamond-like carbon (DLC:N) for the measurement of quantal exocytosis.

Electrochemical measurement of transmitter or hormone release from individual cells on microchips has applications both in basic science and drug screening. High-resolution measurement of quantal exocytosis requires the working electrode to be small (cell-sized) and located in immediate proximity to the cell. We examined the ability of candidate electrode materials to promote the attachment of two hormone-secreting cell types as a mechanism for targeting cells for to recording electrodes with high precision. We found that nitrogen-doped diamond-like carbon (DLC:N) promoted cell attachment relative to other materials tested in the rank order of DLC:N>In(2)O(3)/SnO(2) (ITO), Pt>Au. In addition, we found that treating candidate electrode materials with polylysine did not increase attachment of chromaffin cells to DLC:N, but promoted cell attachment to the other tested materials. We found that hormone-secreting cells did not attach readily to Teflon AF as a potential insulating material, and demonstrated that patterning of Teflon AF leads to selective cell targeting to DLC:N "docking sites". These results will guide the design of the next generation of biochips for automated and high-throughput measurement of quantal exocytosis.

Magnetron sputtered diamond-like carbon microelectrodes for on-chip measurement of quantal catecholamine release from cells.

Carbon electrodes are widely used in electrochemistry due to their low cost, wide potential window, and low and stable background noise. Carbon-fiber electrodes (CFE) are commonly used to electrochemically measure "quantal" catecholamine release via exocytosis from individual cells, but it is difficult to integrate CFEs into lab-on-a-chip devices. Here we report the development of nitrogen doped diamond-like carbon (DLC:N) microelectrodes on a chip to monitor quantal release of catecholamines from cells. Advantages of DLC:N microelectrodes are that they are batch producible at low cost, and are harder and more durable than graphite films. The DLC:N microelectrodes were prepared by a magnetron sputtering process with nitrogen doping. The 30 microm by 40 microm DLC:N microelectrodes were patterned onto microscope glass slides by photolithography and lift-off technology. The properties of the DLC:N microelectrodes were characterized by AFM, Raman spectroscopy and cyclic voltammetry. Quantal catecholamine release was recorded amperometrically from bovine adrenal chromaffin cells on the DLC:N microelectrodes. Amperometric spikes due to quantal release of catecholamines were similar in amplitude and area as those recorded using CFEs and the background current and noise levels of microchip DLC:N electrodes were also comparable to CFEs. Therefore, DLC:N microelectrodes are suitable for microchip-based high-throughput measurement of quantal exocytosis with applications in basic research, drug discovery and cell-based biosensors.