Accuracy of Computer-Guided Implantology with Pilot Drill Surgical Guide: Retrospective 3D Radiologic Investigation in Partially Edentulous Patients.

Background and Objectives: Implant placement with static navigation enables the reaching of a correct position of implants from an anatomical and prosthetic point of view. Different approaches of static navigation are described in the scientific literature, and the pilot-guided approach is one of the least investigated. The aim of the present study is the evaluation of the accuracy of implant insertion using a pilot drill template. Materials and Methods: Fifteen partially edentulous patients, requiring an implant rehabilitation of at least one implant, were enrolled. Pre- and post-operative low-dose CTs were acquired to measure the differences between final positions of implants and virtually planned ones. Three linear discrepancies (coronal, apical, and depth), two angular ones (bucco-lingual and mesio-distal), and the imprecision area were evaluated. Correlations between accuracy and rehabilitated jaws, sectors, and implant length and diameters were also analyzed. Results: Forty implants were inserted in fifteen patients using pilot drill templates. Mean coronal deviation was 1.08 mm, mean apical deviation was 1.77 mm, mean depth deviation was -0.48 mm, mean bucco-lingual angular deviation was 4.75°, and mean mesio-distal one was 5.22°. The accuracy was statistically influenced only by the rehabilitated jaw for coronal discrepancy and sectors and implant diameter for bucco-lingual angular deviations. Conclusions: The pilot drill template could represent a predictable solution to obtain a correct implant placement. Nonetheless, a safety margin of at least 2 mm should be respected during implant planning to prevent damages to anatomical structures. Therefore, the tool is helpful in order to prosthetically drive the implants; still, great attention must be paid in fully relying on this procedure when approaching dangerous structures such as nerves and vessels.

Digital Customized Titanium Mesh for Bone Regeneration of Vertical, Horizontal and Combined Defects: A Case Series.

Background and Objective: Guided bone regeneration allows new bone formation in anatomical sites showing defects preventing implant rehabilitation. Material and Methods: The present case series reported the outcomes of five patients treated with customized titanium meshes manufactured with a digital workflow for achieving bone regeneration at future implant sites. A significant gain in both width and thickness was achieved for all patients. Results: From a radiographic point of view (CBTC), satisfactory results were reached both in horizontal and vertical defects. An average horizontal gain of 3.6 ± 0.8 mm and a vertical gain of 5.2 ± 1.1 mm. Conclusions: The findings from this study suggest that customized titanium meshes represent a valid method to pursue guided bone regeneration in horizontal, vertical or combined defects. Particular attention must be paid by the surgeon in the packaging of the flap according to a correct method called the "poncho" technique in order to reduce the most frequent complication that is the exposure of the mesh even if a partial exposure of one mesh does not compromise the final outcome of both the reconstruction and the healing of the implants.

Bleeding Rate After Tooth Extraction in Patients Under Oral Anticoagulant Therapy.

OBJECTIVES: The aim of this single-cohort prospective study was to evaluate the risk of adverse outcomes after tooth extraction in patients suffering from cardiovascular disorders and under oral anticoagulant therapy with an international normalized ratio within the value of 3.0. METHODS: Two hundred ninety-three patients (mean age of 58.7 years) were enrolled and 560 tooth extractions were performed. Fresh extraction sockets were treated with collagen tablets and sutures. The risk of increased bleeding rate was evaluated for type of drug therapy (acenocoumarol or warfarin), type of cardiovascular diseases, and number of tooth extractions. Level of significance was set at 0.05. RESULTS: The overall bleeding event rate was 6.8%. Among patients who had bleeding events, 4 suffered from valvular disorders, whereas 11 suffered from arrhythmias (8) or cardiomyopathies (3). The remaining 5 patients had a history of cardiomyopathy and arrhythmia.The bleeding events in patients who had more than 2 tooth extractions were significantly higher than those observed in patients who had only 1 tooth extraction (P <0.05). CONCLUSION: Patients who received more than 2 tooth extractions, who were under treatment with acenocoumarol, and who suffered from multiple cardiovascular diseases were at high risk for bleeding events.

A New Radiologic Protocol and a New Occlusal Radiographic Index for Computer-Guided Implant Surgery.

A minimum interarch space of 40 mm along the planned direction of the implant is physically mandatory to allow computer-guided implant placement with the NobelGuide technique. The aim of this paper was to describe a novel radiologic protocol and a new occlusal radiographic index that give the clinician the possibility of identifying patients with limited interarch space. Three patients undergoing NobelGuide treatment of the edentulous upper jaw were selected as candidates for this study. In the first patient, the radiographic occlusal index was built using an addition silicone material to occupy the space between the 2 arches forced into the maximum opening position. In the other 2 patients different silicone materials were used and 2 interpositional wedges were placed in between 2 silicone bites to ensure maximum mouth opening. In the first patient, the bite made with addition silicone alone resulted in distinct noise on computer tomography since the patient was not forced to achieve his maximum opening position. In the second patient the mandibular addition silicone was still quite visible, while in the third patient the condensation silicone was invisible and the quality of the image was excellent with the possibility of measuring maximum opening position and virtually predicting interference with the opposite arch. The new radiological occlusal index made with condensation silicone (Sandwich Index) proved to be effective in reproducing the maxillary forced maximum opening position during the initial planning phase, preventing errors in the inclusion or exclusion of patients suitable for NobelGuide treatment.

Maxillary Segmental Micro Osteotomy: A Human Cadaver Study on the Efficacy of the Technique.

PURPOSE: Ultrasonic bone cutting was recently introduced as a feasible alternative to the conventional tools of cranio-maxillofacial surgery because it offers improved precision and safety.This study examined the feasibility of minimally invasive orthodontic or preprosthetic surgery using a piezosurgery device for latero-posterior maxillary segmental osteotomy. MATERIALS AND METHODS: Four fresh cadaveric heads were obtained for this study. Maxillary posterior osteotomy was performed using piezoelectric surgery. To preserve the vascular supply, only 1 vestibular incision was made during surgery. The Mectron Piezosurgery unit is a multipurpose device that uses micrometric ultrasonic piezoelectric vibrations with a variable frequency and cutting energy. The strategy for maxillary osteotomy included 1 horizontal osteotomy, 2 vertical osteotomies, and 1 palatal osteotomy performed transantrally without incision of the mucoperiosteum. The osteotomies were performed using a piezodevice (OT7-type inserts: 0.55 and 0.35 mm). In total, 1 horizontal cut (3 mm above the roots of the teeth), 2 vertical bone cuts, and 1 palatal osteotomy were made without incision of the palatal mucoperiosteum.Gentle dissection of the buccal fat pad was used to promote the healing of hard and soft tissues in the osteotomized zone. RESULTS: No damage to soft tissues, including the palatal mucosa, occurred. The buccal fat pad was mobilized easily without requiring an additional incision. The osteotomic sites were linear and clean in the palatal aspect. The integrity of the vascular network was maintained because of the lack of damage to the palatal mucosa. No chisels were used during the osteotomies. DISCUSSION: This cadaveric study shows the feasibility of using piezosurgery for segmental maxillary osteotomy. This report outlines a new and simple application of segmental maxillary micro-osteotomy.

Extensive keratinized tissue augmentation during implant rehabilitation after Le Fort I osteotomy: using a new porcine collagen membrane (Mucoderm).

The aim of this study was to test a new collagen matrix (Mucoderm) positioned during oral implant abutment connection. A patient previously treated with Le Fort I for bone augmentation and 8 implants showing minimal amount of keratinized tissue was selected for an extensive keratinized tissue augmentation and deepening of the oral vestibule by apically positioning a split palatal flap and palatal grafting with Mucoderm. Clinical data at 9 and 14 days and 1 and 2 months showed resorption of the collagen graft, augmentation of the keratinized tissue around the implants, and deepening of the vestibule, with minimal morbidity and reduced surgical treatment time. However, some vestibular keratinized tissue contraction was evident. The new collagen matrix may be a promising material as a substitute for an autologous gingival/connective tissue graft. Despite the preliminary results of this innovative article, before drawing any general conclusion, the benefit of the procedure should be further evaluated by prospective clinical trials.

Posttraumatic use of dental implants immediately after tooth extraction: clinical study.

PURPOSE: Root fracture is a combined injury of cementum, dentin, and pulp. Many of these traumas remain untreated, mistreated, or overtreated. It leads to a more complicated treatment in case of tooth loss. Many different treatment procedures, with a very changeable success rate, have been proposed for years to treat teeth with root fractures. The objective of the following clinical studies was to evaluate the clinical effectiveness of implants placed in fresh extraction sites to treat teeth with horizontal root fracture. METHODS: The study group included 25 patients (15 men and 10 women) between the ages of 20 and 65 years. After an initial examination and a treatment planning, all of the patients underwent periodontal treatment, which was deemed necessary to favor wound healing. All the 25 teeth were extracted because of horizontal root fracture located at the level of the middle third. The second-stage surgery was performed 6 months after the initial procedure. The following clinical parameters, presence or absence of mobility, presence or absence of pain, and presence or absence of suppuration, were evaluated in each patient at 6 and 12 months after implant placement. Radiographs were taken using the standard method to evaluate the marginal bone loss. RESULTS: The healing period was uneventful for all patients. All implants had osseointegrated. After 12 months, patients were asymptomatic and showed no signs of infection or bleeding when probed. CONCLUSIONS: On the basis of this study, implants placed right after tooth extraction are a valid treatment procedure, which induces predictable results as treatment of fractured teeth.

High-Density Dermal Matrix for Soft Tissue Augmentation Using a Matrix Tissue Graph Technique-A Comprehensive Multicenter Analysis of 20 Implants: A 1-Year Follow-Up Retrospective Study.

Background: In this multicenter case series analysis, the authors present successful instances of 20 single-screw-retained and implant-supported prosthetic rehabilitation samples. Methods: A high-density heterologous dermal matrix (Derma® Osteobiol by Tecnoss, Torino, Italy) was employed with a specific technique named the matrix tissue graft (MTG) in all these cases characterized by an inadequate initial supra-crestal tissue height (thin if 1 mm or medium if 2 mm) to enhance the peri-implant soft tissues both vertically and horizontally. Results: The implants were deemed successful in all cases, yielding a success proportion of 100% (one-sided 97.5% confidence interval = 83.2-100%). The buccal and lingual gains were, respectively, 2.2 ± 0.38 mm (range 1.7-3.22 mm) and 0.83 ± 0.33 mm (range 0.1-1.5 mm). These measurements were calculated as the maximum distance between two superimposed .stl file models (derived from two different IOS devices) scanned before implant placement and 1 year after dermal matrix healing. Conclusions: An outstanding vertical and horizontal gain was obtained using this heterologous derma matrix placed above the bone crest and surrounding the dental implants.

A New Matrix for Soft Tissue Management.

Gingival recession is a mucogingival defect defined as the apical shifting of the gingival margin in relation to the CEJ. The use of connective tissue autografts allows for the obtention of very satisfactory results but is associated with undoubted disadvantages. The aim of the present work is to carry out a systematic review of the literature using a meta-analysis to investigate the clinical efficacy of xenogeneic collagen matrix (XCM) in the treatment of gingival recessions. This revision was carried out strictly following the guidelines published in the Cochrane Handbook. Thus, a meta-analysis was performed to calculate relative risks and standardized mean differences for each of the variables considered. The results of the meta-analysis show that CAF + CTG was statistically better than CAF + XCM in almost all the variables analyzed: complete root coverage (RR 0.46), mean root coverage (SMD -0.89), recession reduction (SMD -0.98), clinical attachment level (SMD -0.63) and gingival thickness (SMD -1.68). Meanwhile, CAF + XCM was slightly better than CAF alone in regard to: mean root coverage (SMD 0.51), recession reduction (SMD 0.47) and gingival thickness (SMD 0.56). It is possible to conclude that CAF + CTG still remains the gold standard in radicular coverage.

A Novel Muco-Gingival Approach for Immediate Implant Placement to Obtain Soft- and Hard-Tissue Augmentation.

The aim of this article is to describe a novel approach combining muco-gingival, regenerative and prosthetics concepts for immediate implant insertion that overcomes the limits traditionally considered as contraindications for Type 1 flapless implant positioning, simultaneously obtaining soft- and hard-tissue augmentation. After pre-surgical CBCT evaluation, the surgical technique consisted in the execution of a lateral-approach coronally advanced envelope flap, with oblique submarginal interproximal incisions directed towards the flap's center of rotation (the tooth to be extracted); after buccal-flap elevation, the atraumatic extraction of the tooth was performed. Following guided implant insertion, a mixture of biomaterial and autologous bone was placed, stabilized by a pericardium membrane and a connective-tissue graft sutured in the inner aspect of the buccal flap. The peri-implant soft tissues were conditioned with a provisional crown until the shape and position for the mucosal scallop to resemble the gingival margin of the adjacent corresponding tooth were obtained; then, the definitive screw-retained restoration was placed. Within the limitations of this case report, the proposed immediate implant placement approach combining CTG application and buccal bone regeneration showed the possibility of obtaining 1-year-follow-up implant success, stable bone level, good esthetic results and high patient satisfaction.

Alveolar splitting with Piezosurgery®, bone bank grafts and NobelActive implants as an alternative to major bone grafting for maxillary reconstruction.

BACKGROUND: Piezosurgery® represents a novel alternative technique. The Piezosurgery® is well tolerated and permits a large number of applications in described literature. The principle of Piezosurgery® consists into inducing micro-vibrations to a metallic insert with a particular custom. The aim of this article is to study and to evaluate the use of NobelActive implants in combination with piezosurgical split-crest technique in severe atrophy of the upper maxilla. This approach allows avoiding the use of onlay grafts, due to rise the trasversal width of the crestal bone, which could have more complications and uncertain prognosis. This technique allows reducing timing of implant insertion because it is not necessary to wait for the graft to heal. METHODS: Ten patients (age 45-58) are selected, presenting from class 4 to 5 by Cawood and Howell of jaws. Those underwent piezosurgical split-crest technique and simultaneous implants surgery and bone grafts. Preoperative X-ray evaluation included standard X-panoramic and CT Dental-scan. Standard chemoprophylaxis was administered to each patient. The piezosurgical split-crest procedure was combined with tissue bank fresh frozen chips and double-layer collagen membrane to improve the thickness of alveolar bone and simultaneous implant surgery. Every patient received simultaneously from 3 to 6 implants which diameter was 4.3 mm and length 10-11.5 mm. Healing abutments have been applied at 5 months from the first procedure. RESULTS: Patients were clinically monitored, and marginal bone changes were calculated using periapical radiographs, which were taken with O-ring technique at placement and upon subsequent appointments and a 1-mm measurement grid for marginal bone remodeling, again at baseline and thereafter 3 months within loading. Cumulative implant survival was 97.8% (N.=45). Mean marginal bone resorption (SD) was 1.19 (1.01) mm for the early loading group after 1 year. The use of NobelActive implants seem to reduce peak stress in both cortical and trabecular bone. CONCLUSIONS: The use of NobelActive implants was revealed ideal in patients presenting jaw atrophy. The tapered designs show an ability to dissipate the interfacial stresses of bone, therefore improving the stability and the osteointegration if used in association to split crest made with piezosurgical device.

Clinical Outcomes of Implants Placed in Extraction Sockets and Immediately Restored: A 7-Year Single-Cohort Prospective Study.

BACKGROUND: The placement of implants immediately after tooth extraction has proven to be a predictable treatment strategy with a very high success rate. PURPOSE: The aim of the present 7-year prospective single cohort study was to evaluate the success rate, marginal bone level (MBL), soft tissue stability of implants placed in fresh extraction sockets and immediately restored. MATERIAL AND METHODS: This prospective cohort study included 37 implants in 32 patients (19 females and 13 males) with an average age of 40.1 ± 13.3 (range: 21-63 years) who received immediate implants and immediate single unit restorations. Outcome evaluations were: implant failures, complications, MBL, width of keratinized gingiva, facial soft tissue (FST) levels, modified Plaque Index and modified Bleeding Index. RESULTS AND CONCLUSIONS: The cumulative survival rate was of 94.6% at 7-year visit. The mean MBL was -0.6 ± 0.49 mm at baseline and 1 ± 0.2 mm after 7 years. The FST Level was 0.4 ± 0.69 mm at baseline and 0.02 ± 0.70 mm at the 7-year follow-up. The Width of Keratinazed Gingiva was 3.8 ± 0.47 mm at baseline and 3.1 ± 0.42 mm at 7-year follow-up. Implants placed immediately after tooth extraction and immediately restored showed predictable clinical outcomes in this prospective study.

A piezo surgery with corticotomies and implant placement as part of a multidisciplinary approach to treat malocclusion disorder in an adult patient: clinical report.

This clinical report illustrates a multidisciplinary approach for the rehabilitation of a young adult patient affected by a bilateral edentulous space and an anterior deep bite. The patient required orthodontics and surgical corticotomy and implantology (both performed with a piezo device). A multidisciplinary planning approach, including orthodontics, oral and periodontic surgery, and restorative dentistry, has an important role in the final outcome of treatment. In fact a dental class I occlusion has been established only on the right side. The left side could not be restored to an ideal class I relationship due to the pontic prosthesis. The original collapsed right posterior occlusion was corrected. A stable posterior occlusion was established, and the balancing interference was eliminated. Centric relation and centric occlusion were established at the same vertical dimension of occlusion. The cephalometric analysis and clinical aspect at the end of treatment showed that the patient had improvements in overbite and overjet.Multidisciplinary management, including endodontic and restorative dentistry, periodontics, corticotomy-assisted orthodontics, implants, and prosthetics, was used for a young female patient with multiple missing teeth, anterior deep bite, and a malocclusion with cant of the occlusal plane. The interaction of interdisciplinary specialties and careful treatment planning were required. The patient also benefited esthetically from our effort.

Immediate implant placement in infected sites: a case series.

BACKGROUND: Immediate implant placement has several advantages, such as reduction in the number of surgical treatments and reduction of the time between tooth extraction and the placement of the definitive prosthesis. However, there are still some situations that could jeopardize the success of the aforesaid therapy, such as the presence of an infection caused by periodontal disease or periapical lesions. The aim of this case series is to evaluate the clinical success of implants placed in fresh extraction sockets that showed clinical signs of periodontal disease. METHODS: Thirteen patients (six males and seven females, 24 to 65 years old) are included in this case series. After initial examination and treatment planning, all patients underwent the periodontal treatment deemed necessary to facilitate wound healing. Twenty teeth were extracted as a result of an infection. Second-stage surgery was performed 4 months after the initial procedure. The following clinical parameters were evaluated for each patient at the time of implant placement and at the end of the 12-month follow-up period: 1) clinical attachment level (CAL); 2) presence or absence of mobility; 3) presence or absence of pain; and 4) presence or absence of suppuration. The bone level was measured as the distance from the implant shoulder to the first bone-implant contact (distance bone-implant [DIB]) by periapical radiographs. The stability and health of the soft tissue were clinically evaluated by means of the plaque score. RESULTS: The healing period was uneventful for all the patients. All the implants were osseointegrated. At the end of the 12-month follow-up period, patients were asymptomatic and showed no signs of infection or bleeding when probed. The mean CAL at the mid-buccal location per implant was 0.8 mm at baseline and 0.9 mm at the end of the follow-up. The mean width of keratinized mucosa measured at the mid-buccal location per implant at baseline and 1-year visits was 3.2 ± 0.4 mm and 3.3 ± 0.5 mm, respectively. The periapical radiographs, obtained in a standardized manner, revealed a mean increase of 0.5 mm in the DIB value. At the 12-month follow-up, the presence of plaque was observed in 44 of the 80 sites analyzed. CONCLUSION: Based on the results of this case series, placement of implants in fresh extraction sockets affected by infection may be a valid operative technique that leads to predictable results if adequate preoperative and postoperative care is taken.

Immediate loading of single implants inserted flapless with medium or high insertion torque: a 6-month follow-up of a split-mouth randomised controlled trial.

PURPOSE: To compare the outcome of immediately loaded single implants inserted with medium (from 25 to 35 Ncm) or high insertion torques (>80 Ncm). MATERIALS AND METHODS: Fifty patients received two single non-adjacent implants, each randomly inserted flapless with a torque between 25 to 35 Ncm or >80 Ncm according to a split-mouth design. Non-occluding temporary crowns were immediately placed on provisional abutments and definitive crowns were delivered after 6 weeks. Patients were followed for 6 months after initial loading. Outcome measures were crown/implant failures, complications, peri-implant marginal bone level changes, postoperative pain and presence of peri-implant apical radiolucency. RESULTS: No drop-out occurred. Seven implants inserted with a torque between 25 to 35 Ncm failed versus none of the implants inserted with a torque >35 Ncm. With the exception of crown/implant failures (exact McNemar significance P = 0.0156, difference in proportions: -0.12; 95% CI -0.21 to -0.02) there were no statistically significant differences between groups for the other outcome measures. CONCLUSIONS: It is preferable to insert single implants with a high insertion torque (>80 Ncm), to minimise early implant failures, when loading them immediately.