Dental fear among adolescents with cleft.

BACKGROUND: Dental fear is a prevalent phenomenon among children and adolescents globally. AIM: To investigate dental fear among 18-year-olds with cleft lip and/or palate (CLP) at their final follow-up cleft clinic visit, and to evaluate the association between dental fear and OHRQoL. DESIGN: This cross-sectional study included the cohort of children with CLP treated at the Oulu University Hospital Cleft Lip and Palate Center, in northern Finland since 1995. A total of 62 of 64 individuals participated in this study. The validated Finnish version of the Oral Health Impact Profile (OHIP-14) was used to assess OHRQoL. Dental fear was studied using the validated Modified Dental Anxiety Scale (MDAS) and cognitive vulnerability model (CVM). RESULTS: Almost two fifths of the participants reported moderate dental fear. Participants with cleft including lip and participants reporting impact on OHRQoL reported higher mean MDAS scores. In an unadjusted model, adolescents with cleft including lip had risk for higher dental MDAS scores compared with the ones with cleft including only palate. CONCLUSIONS: Dental fear is common among adolescents with CLP, specifically among those with clefts involving the lip. OHRQoL and dental fear seem to be associated.

Alendronate Improves Bone Mineral Density in Children and Adolescents Perinatally Infected With Human Immunodeficiency Virus With Low Bone Mineral Density for Age.

BACKGROUND: Children and adolescents with perinatal human immunodeficiency virus (HIV) infection and with low bone mineral density (BMD) may be at higher risk of osteoporosis and fractures in later life than their uninfected peers. Bisphosphonate therapy has been shown to reduce fractures in adults with osteoporosis, but has not been formally studied in youths living with HIV. METHODS: Fifty-two children and adolescents (aged 11-24 years) perinatally infected with HIV with low lumbar spine (LS) BMD (Z score < -1.5) were randomized to receive once-weekly alendronate or placebo in a double-blind cross-over study designed to assess the safety and efficacy of 48 and 96 weeks of alendronate in the United States and Brazil. All participants received daily calcium carbonate and vitamin D supplementation and were asked to engage in regular weight-bearing exercise. Safety and efficacy are summarized for the initial 48 weeks of the trial. RESULTS: Grade 3 or higher abnormal laboratory values, signs, or symptoms developed in 5 of 32 (16%) participants on alendronate and 2 of 18 (11%) on placebo (P > .99). No cases of jaw osteonecrosis, atrial fibrillation, or nonhealing fractures were reported. Mean increases (95% confidence interval) in LS BMD over 48 weeks were significantly larger on alendronate (20% [14%-25%]) than placebo (7% [5%-9%]) (P < .001). Similar improvements were seen for whole body BMD. CONCLUSIONS: In this small study in children and adolescents perinatally infected with HIV with low LS BMD, 48 weeks of alendronate was well-tolerated, showed no safety concerns, and significantly improved LS and whole body BMD compared to participants on vitamin D/calcium supplementation and exercise alone. CLINICAL TRIALS REGISTRATION: NCT00921557.

Facile Impedimetric Analysis of Neuronal Exosome Markers in Parkinson's Disease Diagnostics.

The egress of α-synuclein in neuronally derived exosomes predates the clinical presentation of Parkinson's disease (PD), offering a means of developing a predictive or prognostic test. Here, we report the reagentless impedimetric assay of two internal exosome markers (α-synuclein and syntenin-1) from neuronal exosomes. Exosomes were efficiently extracted from patient sera using anti-L1CAM conjugated zwitterionic polymer-modified magnetic beads prior to lysis and analyzed by electrochemical impedance spectroscopy. The quantification of α-synuclein level across 40 clinical samples resolved statistically significant differences between PD patients and healthy controls (HC).

Case-Based Review of Osteonecrosis of the Jaw (ONJ) and Application of the International Recommendations for Management From the International Task Force on ONJ.

Osteonecrosis of the jaw (ONJ) has been associated with antiresorptive therapy in both oncology and osteoporosis patients. This debilitating condition is very rare and advances in diagnosis and management may now effectively reduce the risk of its development and offer valuable treatment options for affected patients. This paper provides a case-based review of ONJ and application of the International Task Force on ONJ (referred to as the "Task Force") recommendations for the diagnosis and management of ONJ. The Task Force was supported by 14 international societies and achieved consensus from representatives of these multidisciplinary societies on key issues pertaining to the diagnosis and management of ONJ. The frequency of ONJ in oncology patients receiving oncology doses of bisphosphonate (BP) or denosumab is estimated at 1%-15%, and the frequency in the osteoporosis patient population receiving much lower doses of BP or denosumab is estimated at 0.001%-0.01%. Although the diagnosis of ONJ is primarily clinical, imaging may be helpful in confirming the diagnosis and staging. In those with multiple risk factors for ONJ for whom major invasive oral surgery is being planned, interruption of BP or denosumab therapy (in cancer patients) is advised, if possible, before surgery, until the surgical site heals. Major oral surgery in this context could include multiple extractions if surgical extractions are required, not simple forceps extractions. ONJ development may be reduced by optimizing oral hygiene and postoperatively using topical and systemic antibiotics as appropriate. Periodontal disease should be managed before starting oncology doses of BP or denosumab. Local debridement may be successful in disease unresponsive to conservative therapy. Successful surgical intervention has been reported in those with stage 3 disease; less severe disease is best managed conservatively. Teriparatide may be helpful in healing ONJ lesions and may be considered in osteoporosis patients at a high fracture risk in the absence of contraindications. Resumption of BP or denosumab therapy following healing of ONJ lesions is recommended, and there have not been reports of subsequent local recurrence.

Management and prevention of gingival recession.

Gingival recession is highly prevalent worldwide. It increases the risk for root caries and can interfere with patient comfort, function and esthetics. Progressive gingival recession also increases the risk of tooth loss secondary to clinical attachment loss. Although mitigating the causes of gingival recession decreases its incidence and severity, implementing practical management and prevention strategies in the clinical setting can be challenging. Identification of susceptible patients and evaluating them for the presence of modifiable risk exposures are essential first steps in developing action plans for appropriate interventions. This article reviews these steps and introduces chairside tools that can help in the selection of interventions designed to reduce the risk of future gingival recession and may also facilitate patient communication. Practical decision-making criteria are proposed for when and how to monitor gingival recession, for deciding when a patient is a candidate for surgical evaluation or referral to a periodontist, and, if surgery is the treatment of choice, what should be considered as key surgical outcome objectives.

Soft Tissue Augmentation Techniques and Materials Used in the Oral Cavity: An Overview.

PURPOSE: Oral soft tissue augmentation or grafting procedures are often necessary to achieve proper wound closure after deficits resulting from tumor excision, clefts, trauma, dental implants, and tooth recessions. MATERIALS AND METHODS: Autologous soft tissue grafts still remain the gold standard to acquire a functionally adequate zone of keratinized attached gingiva. However, soft tissue substitutes are more commonly used because they minimize morbidity and shorten surgical time. RESULTS: This review aimed to assess soft tissue grafting techniques and materials used in the oral cavity from existing literature. There are a large variety of materials and techniques, including grafts, local flaps, allogenic derived matrices such as acellular dermal allograft, xenogenic tissue matrices from animal origin, and synthetic materials. CONCLUSIONS: Tissue engineering of oral mucosa represents an interesting alternative to obtain sufficient autologous tissue for reconstructing oral wounds using biodegradable scaffolds, and may improve vascularization and epithelialization, which are critical for successful outcomes.

Accuracy in the digital workflow: From data acquisition to the digitally milled cast.

STATEMENT OF PROBLEM: The accuracy of digital impressions and the milling of implant crowns greatly influence the clinical outcome of implant restorations. PURPOSE: The purpose of this in vitro study was to calculate the propagation of error in the process of milling an implant crown. MATERIAL AND METHODS: Thirty digitally milled casts made directly from a reference model were prepared. The casts were scanned with a laboratory scanner, and 30 standard tesselation language (STL) datasets from each group were imported to inspection software. In each analysis, STL datasets were aligned by a repeated best fit algorithm, and 18 specified contact locations of interest were measured in mean volumetric deviations. The master reference dataset was aligned 30 times to the master reference dataset to determine the software variation. The reference datasets were aligned to the master reference dataset to determine the scanner variation. The milled cast datasets were aligned to the master reference dataset to determine the milling variation. The 18 specified contact locations of interest were pooled by cusps, occlusal ridge/fossae, interproximal contacts, facial/lingual aspect, and implant position. The pooled areas were statistically analyzed by comparing each group with the reference model to investigate the mean volumetric deviations accounting for accuracy and standard deviations for precision. RESULTS: Software and scanner variation were negligible. Variations in the milled models resulting from software and scanner error exhibited statistical significance (P<.001). Software, scanner, and milling error were shown to propagate through the digital workflow to the milled model. CONCLUSIONS: The pooled locations may describe the reliability of the milling process as it applies to specific anatomic locations on the tooth.

Dental treatment need and dental general anesthetics among preschool-age children with cleft lip and palate in northern Finland.

Cleft lip and palate incidence is high in northern Finland. This study aimed to investigate the proportion of children in need of restorative dental treatment among cleft lip and palate patients in northern Finland, as well as their need for dental treatment under general anesthesia. The records of 183 cleft lip and palate patients, treated in Oulu University Hospital from 1997 to 2013, were reviewed. Data on dental caries were analyzed in association with cleft type, considering also the presence of syndromes. The frequency of dental general anesthetic (DGA) use, and of treatments, were also analyzed. Dental treatment need was most frequently observed, in this rather limited study population, in patients with the most severe deformities, namely bilateral cleft lip and palate, of whom 60% had caries. Among the study population, 11.5% (n = 21) had a syndrome. Of those, 57.1% had dental caries at the age of 3 or 6 yr, and only four could be treated without a DGA. Dental treatment under general anesthesia was performed in 14.8% of cleft patients without a syndrome, but in 38.1% of those with a syndrome. General anaesthesia is required for the provision of dental care more often in cleft (17.5%) than in non-cleft (0.2%) patients, and especially for those with a syndrome.

Oxidized zirconium head on crosslinked polyethylene liner in total hip arthroplasty: a 7- to 12-year in vivo comparative wear study.

BACKGROUND: Osteolysis resulting from wear debris production from the bearing surfaces is a major factor limiting long-term survival of hip implants. Oxidized zirconium head on crosslinked polyethylene (XLPE) is a modern bearing coupling. However, midterm in vivo wear data of this coupling are not known. QUESTIONS/PURPOSES: The purpose of this study was to investigate in vivo whether the combination of an oxidized zirconium femoral head on XLPE produces less wear than a ceramic head on XLPE or a ceramic head on conventional polyethylene (CPE) couplings and whether any of these bearing combinations results in higher hip scores. METHODS: Between 2003 and 2007, we performed 356 total hip arthroplasties in 288 patients; of those, 199 (69.1%) patients (199 hips) were enrolled in what began as a randomized trial. Unfortunately, after the 57(th) patient, the randomization process was halted because of patients' preference for the oxidized zirconium bearing instead of the ceramic after (as they were informed by the consent form), and after that, alternate allocation to the study groups was performed. Hips were allocated into four groups: in Group A, a 28-mm ceramic head on CPE was used; in Group B, a 28-mm ceramic head on XLPE; in Group C, a 28-mm Oxinium head on XLPE; and in Group D, a 32-mm Oxinium head on XLPE. The authors prospectively collected in vivo wear data (linear wear, linear wear rate, volumetric wear, and volumetric wear rate) using PolyWare software. Preoperative and postoperative clinical data, including Harris and Oxford hip scores, were also collected at regular intervals. Of those patients enrolled, 188 (95%) were available for final followup at a minimum of 7 years (mean, 9 years; range, 7-12 years). RESULTS: All bearing surfaces showed a varying high bedding-in effect (plastic deformation of the liner) up to the second postoperative year. At 5 years both oxidized zirconium on XLPE groups showed lower (p < 0.01) volumetric wear (mean ± SD mm(3)) and volumetric wear rates (mean ± SD mm(3)/year) (Group C: 310 ± 55-206 ± 55 mm(3)/year, Group D: 320 ± 58-205 ± 61 mm(3)/year) when compared with ceramic on CPE (Group A: 791 ± 124-306 ± 85 mm(3)/year) and ceramic on XLPE (Group B: 1420 ± 223-366 ± 88 mm(3)/year) groups. For those patients who had completed 10 years of followup (20 patients [44.5%] of Group A, 21 [45.7%] of Group B, 23 [47.9%] of Group C, and 22 [44.9%] of Group D), at 10 years, both oxidized zirconium on XLPE groups also showed lower (p < 0.01) volumetric wear (mean ± SD mm(3)) and volumetric wear rates (mean ± SD mm(3)/year) (Group C: 356 ± 64 to 215 ± 54 mm(3)/year, Group D: 354 ± 50 to 210 ± 64 mm(3)/year) when compared with ceramic on CPE (Group A: 895 ± 131 to 380 ± 80 mm(3)/year) and ceramic on XLPE (Group B: 1625 ± 253 to 480 ± 101 mm(3)/year) groups. When wear rates of both oxidized zirconium groups were compared, no differences were found at any time interval with the numbers available. Two hips (one from Group A and one from Group B) are scheduled for revision as a result of wear and osteolysis. There were no differences in hip scores among the groups with the numbers available. CONCLUSIONS: In this study, in vivo wear parameters were lower when the combination of an oxidized zirconium head on XLPE liner was used at an average of 9 years (range, 7-12 years) followup. Further larger-scale clinical studies should confirm these findings and evaluate osteolysis and revision rates in association with the use of this bearing coupling. LEVEL OF EVIDENCE: Level II, therapeutic study.

Removal Rates of Dental Implants Placed in Conjunction With Autologous Bone and Xenogeneic and Synthetic Alloplastic Materials in Finland Between 1994 and 2012.

PURPOSE: This study aimed to assess the use of bone augmentation materials in Finland from 1994 to 2012 by assessing removal rates of implants placed in combination with autologous bone, xenogeneic grafts, and synthetic alloplastic materials. MATERIALS AND METHODS: The National Institute for Health and Welfare in Finland granted permission to access raw data of the Finnish Dental Implant Register for implant augmentation materials and removal rates of implants placed in augmented sites from April 1994 to April 2012. RESULTS: A total of 198,538 implants were placed in Finland between 1994 and 2012 in 110,543 operations. A total of 3318 (1.7%) of the placed implants were removed during the observation period. Augmentations were performed on 20,812 (18.8%) operations during 1994-2012. The removal rates of implants placed at sites augmented with autologous bone were 2.31%, xenogeneic materials 0.91%, and synthetic alloplastic materials 2.80%. The removal rate was 1.87% when no augmentation material was used. CONCLUSIONS: The placement of dental implants in conjunction with bone augmentation materials is predictable with a low complication rate.

A 22-year follow-up of an endodontic implant.

Root fractures in the middle and apical thirds of the root are treated by repositioning and for approximately 6 weeks of immobilization while those in the cervical third are immobilized for 3 months. Even though the results are good, some root-fractured teeth are lost and replaced by dental implants or fixed partial dentures. One historic but effective treatment option for those root fractures with unfavorable crown to root ratios is an endodontic implant in middle and apical third root fractures. This method offers immediate stable fixation of a crown and its coronal root segment to the underlying alveolar bone. This report documents the long-term survival of a tooth treated with an endodontic implant. A 25-year-old male patient presented following a bicycle accident with a dislocated unfavorable root fracture in the middle third. The crown with the coronal root segment was secured to the bone using a commercially available endodontic implant. The apical part of the root was removed. Although the clinical and radiological follow-up results of the endodontic implant demonstrated a good clinical function and little bone loss, the implant ultimately had to be removed after 22 years of service due to pain and increasing mobility.

Cast Titanium for Obturator Framework Construction in Maxillofacial Prosthodontics.

A 37 year old male presented with the complaint of a loose and bulky acrylic obturator prosthesis. He had previously tried to using a different acrylic obturator prostheses as well as both cobalt chromium and titanium framework obturators. The most successful previous prosthesis was a titanium based obturator which had performed well prior to a fractured clasp. Accordingly, following an exploration of the available surgical and prosthodontic treatment options, a further tooth borne partial maxillary obturator was provided successfully. The case highlights the relative merits and limitations of the use of cast titanium as a denture base material in partial denture and obturator construction.

Bacterial cellulose as a substrate for microbial cell culture.

Bacterial cellulose (BC) has a range of structural and physicochemical properties that make it a particularly useful material for the culture of bacteria. We studied the growth of 14 genera of bacteria on BC substrates produced by Acetobacter xylinum and compared the results to growth on the commercially available biopolymers agar, gellan, and xanthan. We demonstrate that BC produces rates of bacterial cell growth that typically exceed those on the commercial biopolymers and yields cultures with higher titers of cells at stationary phase. The morphology of the cells did not change during growth on BC. The rates of nutrient diffusion in BC being higher than those in other biopolymers is likely a primary factor that leads to higher growth rates. Collectively, our results suggest that the use of BC may open new avenues in microbiology by facilitating bacterial cell culture and isolation.

Antibiotic prophylaxis patterns of Finnish dentists performing dental implant surgery.

BACKGROUND: The peri-operative use of prophylactic antibiotics in clinically healthy patients undergoing dental implant surgery is very common in Finland. While antibiotics are prescribed with the hope of preventing both local and systemic complications, their application and utilization is not uniform. OBJECTIVE: The aim of this study was to assess the variation in prescribing patterns among Finnish dentists performing dental implant placement operations. This study also aimed to examine the possible relationship between early implant removal and the use of the prophylactic antibiotics in Finland. MATERIALS AND METHODS: The National Institute for Health and Welfare in Finland granted permission to access the Finnish Dental Implant Register. The peri-operative antibiotic prophylaxis prescribing patterns were assessed in a total of 110 543 dental implant placement procedures and 1038 dental implant removal operations performed in Finland between April 1994 and April 2012. RESULTS: A total of 61 different antibiotics or combinations were prescribed peri-operatively during implant placements in Finland between 1994-2012. Phenoxymethylpenicillin was the most commonly prescribed drug (72.2%). No statistically significant difference in early implant removal rates could be found between patients who had or had not received peri-operative prophylaxis. However, patients who had received peri-operative prophylaxis had statistically significant longer implant survival rates. CONCLUSION: There is a variation in antibiotic prescribing patterns among Finnish dentists placing dental implants. The results suggest that the use of prophylactic antibiotics has little effect on the prevention of primary implant surgery-related complications and, hence, success rates.

Distribution of microplastics in seafloor sediments and their differential assimilation in nearshore benthic molluscs along the south-west coast of India.

Spatial and temporal distribution of microplastics (MPs) in the nearshore seafloor sediments along the Southwest coast of India and their patterns of accumulation in selected infaunal and epibenthic molluscs with diverse feeding strategies were investigated. Along the 300-km coastal stretch, which is one of the most productive and biodiversity rich regions of the eastern Arabian Sea, notable levels of MP contamination in both sediment (617.7 items/kg dry weight) and molluscs (5.39 items/g) was recorded. The concentration of MPs in sediments also varied seasonally, with a higher prevalence during the post-monsoon season. Among the four molluscan groups studied, the highest MP abundance was recorded among scavenging gastropod Pseudominolia biangulosa (9.13 items/g), followed by microcarnivore scaphopod Tesseracme quadrapicalis (5.96 items/g). In comparison, the suspension feeding bivalve, Anadara hankeyana and deposit feeding clam Jitlada philippinarum had lesser accumulation of MPs (2.98 items/g and 3.50 items/g respectively). The majority of MPs in sediments and within molluscs were less than 250 µm in size (89.14%) and were predominantly fibres and fragments. Chemical characterisation of MPs revealed eleven types of polymers dominated by polyethylene (PE) and polypropylene (PP). Present study identified positive correlations between ingested MP polymers and the feeding strategies of molluscs. Higher values for the ecological risk assessment indices (PHI, PLI and PERI) in most of the stations indicated the severity of plastic pollution in the region. Molluscs being a major contributor to the benthic food web is also a connecting link to higher trophic levels. Hence understanding the specificity in the MPs accumulation pattern within this group has far reaching significance in utilizing them as potential bioindicators for pollution studies in marine ecosystems.

A Streamlined and Standardized Procedure for Generating High-Titer, High-Quality Adeno-Associated Virus Vectors Utilizing a Cell Factory Platform.

Preclinical gene therapy research, particularly in rodent and large animal models, necessitates the production of AAV vectors with high yield and purity. Traditional approaches in research laboratories often involve extensive use of cell culture dishes to cultivate HEK293T cells, a process that can be both laborious and problematic. Here, a unique in-house method is presented, which simplifies this process with a specific cell factory (or cell stacks, CF10) platform. An integration of polyethylene glycol/aqueous two-phase partitioning with iodixanol gradient ultracentrifugation improves both the yield and purity of the generated AAV vectors. The purity of the AAV vectors is verified through SDS-PAGE and silver staining, while the ratio of full to empty particles is determined using transmission electron microscopy (TEM). This approach offers an efficient cell factory platform for the production of AAV vectors at high yields, coupled with an improved purification method to meet the quality demands for in vivo studies.

The Relationship Between the Retromandibular Vein and the Extratemporal Segment of the Facial Nerve: A Prospective Cadaveric Study of 24 Hemifaces.

INTRODUCTION: Anatomical preservation and functional integrity of the facial nerve (FN) are the main concerns of parotid surgery. Even though a variety of anatomical landmarks have been proposed and widely utilized, temporal or permanent postoperative FN palsy is still a significant comorbidity of parotid surgery. Therefore, the literature must fully elucidate the consistency of the anatomical relationship between the FN and the retromandibular vein (RMV). METHODS: We conducted a cadaveric study of 24 hemifaces to map the relationship between the FN and the RMV. Three distinct patterns were identified. Fourteen of the hemifaces were males, and 10 were females. Thirteen cadaveric dissections were performed on the right side and 11 on the left side. RESULTS: Our study found three distinct patterns and proposed a classification system. Type I (66.7%) is when the nerve lies exclusively lateral to the RMV. Type II (29.2%) is when the FN lies superficial to the RMV, but its mandibular branch lies deep to the anterior branch of the RMV, and type III (4.1%) is when the FN lies exclusively medial to the RMV. CONCLUSION: The FN and RMV relationship is not constant, and surgeons should be aware of every anatomical variation. Especially in cases where the FN is estimated to lie more in-depth to the level of the RMV, a retrograde approach may be required to avoid a FN injury.

Exogenously added BMP-6, BMP-7 and VEGF may not enhance the osteogenic differentiation of human adipose stem cells.

In the present study bone morphogenetic protein (BMP)-6 alone or in synergy with BMP-7 and vascular endothelial growth factor (VEGF) were tested with human adipose stem cells (hASCs) seeded on cell culture plastic or 3D bioactive glass. Osteogenic medium (OM) was used as a positive control for osteogenic differentiation. The same growth factor groups were also tested combined with OM. None of the growth factor treatments could enhance the osteogenic differentiation of hASCs in 3D- or 2D-culture compared to control or OM. In 3D-culture OM promoted significantly total collagen production, whereas in 2D-culture OM induced high total ALP activity and mineralization compared to control and growth factors groups, but also high cell proliferation. In this study, hASCs did not respond to exogenously added growth although various parameters of the study set-up may have affected these findings contradictory to the previous literature.

Tent-pole approach to treat severely atrophic fractured mandibles using immediate or delayed protocols: preliminary case series.

PURPOSE: To investigate the outcomes of patients with severely resorbed fractured mandibles who were managed with a modified tent-pole procedure. PATIENTS AND METHODS: Four edentulous patients (2 male and 2 female; mean age, 59.5 years; range, 52 to 64 years) with a severely atrophic fractured mandible and less than 10 mm of vertical height of the body of the mandible were treated with an immediate or a delayed protocol (n=2 in each group). In the immediate group, a transcutaneous submental approach was used to provide open reduction with rigid fixation, immediate dental implant placement in the anterior mandible, and an autogenous particulate iliac bone grafting harvested from the posterior iliac crest. In the delayed protocol group, the fractures were treated with an open reduction and rigid fixation. Six months after fracture treatment, the fixation hardware was removed and a tent-pole approach was used to place the dental implants to the anterior mandible with an autogenous bone graft harvested from the posterior iliac crest. Implant fixtures were loaded at 3 months as the patients were fitted with healing caps, and the dental implants were loaded using provisional screw-retained acrylic resin prostheses and bar-retained overdentures afterward. The mean follow-up was 19.8 months (range, 13 to 28 months). RESULTS: The postoperative course and healing of the 4 patients was uneventful, without any fracture nonunion. The average alveolar augmentation±standard deviation was 7.5±1.17 mm (range, 6.6 to 9.0 mm). There was no bone resorption around any of the endosseous implants on follow-up. All 4 patients wore their dental implant-supported prosthesis comfortably. CONCLUSIONS: This preliminary evidence indicates that the modified tent-pole technique may be a safe and effective method to manage the fractured severely resorbed mandible using an immediate or a delayed protocol. Much larger-scale prospective evidence is required to further validate this observation.

Navigation-assisted Le Fort I osteotomy with midpalatal split to treat compressive pathologies of the craniovertebral junction.

This report describes the management of the case of an 11-year-old girl with serious compressive pathology of the craniocervical junction using a navigation-guided Le Fort I level maxillotomy and midline split. In this pediatric case, image guidance significantly enhanced intraoperative orientation and helped to determine the correct location of the horizontal osteotomy lines at the Le Fort I level.