Covalently Grafted Peptides to Decellularized Pericardium: Modulation of Surface Density.

The covalent functionalization of synthetic peptides allows the modification of different biomaterials (metallic, polymeric, and ceramic), which are enriched with biologically active sequences to guide cell behavior. Recently, this strategy has also been applied to decellularized biological matrices. In this study, the covalent anchorage of a synthetic peptide (REDV) to a pericardial matrix decellularized via Schiff base is realized starting from concentrated peptide solutions (10-4 M and 10-3 M). The use of a labeled peptide demonstrated that as the concentration of the working solution increased, the surface density of the anchored peptide increased as well. These data are essential to pinpointing the concentration window in which the peptide promotes the desired cellular activity. The matrices were extensively characterized by Water Contact Angle (WCA) analysis, Differential Scanning Calorimetry (DSC) analysis, geometric feature evaluation, biomechanical tests, and preliminary in vitro bioassays.

Preliminary hemocompatibility assessment of an innovative material for blood contacting surfaces.

Over the years, several devices have been created (and the development of many others is currently in progress) to be in permanent contact with blood: mechanical circulatory supports represent an example thereof. The hemocompatibility of these devices largely depends on the chemical composition of blood-contacting components. In the present work, an innovative material (hybrid membrane) is proposed to fabricate the inner surfaces of a pulsatile ventricular chamber: it has been obtained by coupling a synthetic polymer (e.g., commercial polycarbonate urethane) with decellularized porcine pericardium. The hemocompatibility of the innovative material has been preliminarily assessed by measuring its capacity to promote thrombin generation and induce platelet activation. Our results demonstrated the blood compatibility of the proposed hybrid membrane.

Porcelain aorta: A surgical dilemma in orthotopic heart transplantation.

BACKGROUND: Circumferential calcification of the ascending aorta, known as porcelain aorta, in a patient candidate to a heart transplant, requires technically demanding and high-risk procedural adjustments. AIMS: This case report showed successful replacement of ascending aorta due to extensive calcification at time of heart transplantation. MATERIALS AND METHODS: In the operating theatre, after median sternotomy, cardiopulmonary bypass (CPB) was achieved via the right femoral artery and vein. Due to the impossibility of replacing the ascending aorta using safe aortic cross-clamping, a moderate hypothermia was established, and circulatory arrest was realized. According to Kazui protocol for selective anterograde cerebral perfusion via anonymous trunk and left carotid artery, ascending aorta was replaced with vascular prosthesis. RESULTS: Thanks to accurate pre-surgical planning, which included hypothermic circulatory arrest, ascending aorta replacement, before orthotopic heart implantation, we were able to perform the procedure successfully and prevent neurological events. DISCUSSION: Although different reports showed the feasibility of heart transplant combined to aortic replacement for aneurysmatic pathology, few cases were described for porcelain aorta, due to technically demanding procedure and prohibitive aortic cross-clamping. To avoid vascular embolization, dissection and mural laceration, aortic cross-clamping is not recommended. We performed aortic replacement at first, to reduce allograft ischemia. CONCLUSION: The use of hypothermic circulatory arrest technique with selective cerebral perfusion for aortic replacement, followed by vascular graft clamping to favour cardiac allograft implantation, could be considered a winning combination to guarantee procedural success and to reduce perioperative complications.

The Biocompatibility Challenges in the Total Artificial Heart Evolution.

There are limited therapeutic options for final treatment of end-stage heart failure. Among them, implantation of a total artificial heart (TAH) is an acceptable strategy when suitable donors are not available. TAH development began in the 1930s, followed by a dramatic evolution of the actuation mechanisms operating the mechanical pumps. Nevertheless, the performance of TAHs has not yet been optimized, mainly because of the low biocompatibility of the blood-contacting surfaces. Low hemocompatibility, calcification, and sensitivity to infections seriously affect the success of TAHs. These unsolved issues have led to the withdrawal of many prototypes during preclinical phases of testing. This review offers a comprehensive analysis of the pathophysiological events that may occur in the materials that compose TAHs developed to date. In addition, this review illustrates bioengineering strategies to prevent these events and describes the most significant steps toward the achievement of a fully biocompatible TAH.

Aortic valve hydrodynamics: considerations on the absence of sinuses of Valsalva.

BACKGROUND AND AIM OF THE STUDY: The study aim was to compare the hydrodynamics of the Carpentier-Edwards Magna 21 (CEM) and St. Jude Medical Biocor-Epic-Supra 21 (SJME) valves at increasing stroke volume and pulse rate in two different aortic conduits, namely straight and with sinuses of Valsalva present. METHODS: Both valve types were tested in the aortic chamber of the Sheffield pulse duplicator, at rates of 70, 80 and 90 beats/min, and stroke volumes of 50 and 60 ml. The systolic and diastolic performances were each recorded. The leaflet coaptation time, ventricle isovolumetric time and maximum instantaneous flow rate were also recorded. RESULTS: Regardless of the aortic conduit, CEM valves showed a significantly lower gradient than SJME valves (p < 0.05), and a significantly larger effective orifice area (EOA) (p < 0.05); the latter parameter was unaffected for both valves, at an increasing pulse rate (p > 0.05). The maximum transvalvular flow velocity was significantly higher in the straight conduit for both valves (p < 0.05). With regards to diastole, the SJME valve showed the lowest regurgitant volume (p < 0.05). The leaflet coaptation time was significantly shorter for the SJME valve than for the CEM valve (p < 0.05), but when tested in a straight conduit it was shortened significantly for both valves (p < 0.05). CONCLUSION: An absence of the sinuses of Valsalva may modify the diastolic and systolic behaviors of the tissue valve leaflets by reducing the time required for leaflet coaptation, and increasing the valve closing volume and maximum transvalvular flow velocity. It is speculated that these hydrodynamic changes may increase the working stress on the valve tissue, leading to possible premature structural valve deterioration.

Physiological performance of a detergent decellularized heart valve implanted for 15 months in Vietnamese pigs: surgical procedure, follow-up, and explant inspection.

This study features the longest experimental follow-up for decellularized heart valves implanted in an animal model. Porcine aortic heart valves were decellularized according to a disclosed standardized method in which TRITON X-100 and sodium cholate (TRICOL) are used in succession, followed by a further treatment with the endonuclease Benzonase to completely remove the nucleic acid remnants. Experimental animals (n = 17), represented by Vietnamese pigs (VPs), received a decellularized aortic allograft as a substitute for the replacement of their right ventricular outflow tract. The surgical implantation of the TRICOL-treated aortic valve conduit was successful in 11 VPs, while perioperative or postoperative complications occurred in the remaining six animals. In the sham-operated group (n = 4), the native pulmonary root was excised and immediately reimplanted orthotopically in the same animal. Echocardiography demonstrated a satisfactory hemodynamic performance of the TRICOL-treated valves during follow-up as well as the absence of relevant leaflet alterations concerning thickness and motility or valve insufficiency. At explantation, macroscopic inspection of tissue-engineered heart valve conduits did not evidence calcifications and showed a decreased wall thickness, comparable to that of the reimplanted native pulmonary roots. Noteworthy, extended functional performance, recovery of DNA content, and active extracellular matrix precursor incorporation are apparently compatible with the properties of a living self-supporting substitute.

The changing hydrodynamic performance of the decellularized intact porcine aortic root: considerations on in-vitro testing.

BACKGROUND AND AIM OF THE STUDY: The most effective method for decellularization of the intact porcine aortic root remains controversial. Additionally, the hydrodynamic effect that such treatment may have on aortic roots has never been previously investigated. The study aim was to compare the in-vitro hydrodynamic performances of intact porcine aortic roots, both before and after decellularization treatment. METHODS: Fifteen fresh porcine aortic roots were tested in the aortic chamber of the Sheffield pulse duplicator (SPD). For study purposes, the roots were first sutured to a silicone aortic root and then hydrodynamically tested. After in-vitro testing, the fresh porcine aortic roots, while still fixed within the silicone root, were decellularized according to various protocols (TRI-COL, TRI-DOC, sodium dodecyl sulfate (SDS) 0.03%, and SDS 0.1%). After decellularization, the valve roots were re-tested, adopting identical testing conditions. Forward flow pressure drop, closing leakage volumes, effective orifice area (EOA), and stroke work loss were each monitored. Three roots, used as a control group, were tested in identical fashion before and after storage (without decellularization) for comparative purposes. RESULTS: The TRI-COL- and TRI-DOC-treated porcine aortic roots showed significantly lower transvalvular gradients, lower stroke work loss, lower valve resistance, and higher EOA than fresh intact porcine roots. In contrast, SDS 0.1%-treated porcine aortic roots showed opposing results, with the transvalvular gradients, stroke work loss and valve resistance each higher, and the EOA lower, than pre-treatment values. SDS 0.03% treatment had no significant effect on the hydrodynamic performance. After decellularization in all treatment groups, the diastolic parameters, total regurgitant volume and valve closing volume were each non-significantly increased. The aortic roots used as a control group showed similar results before and after storage. CONCLUSION: Based on these results using the SPD, all treatments except for SDS 0.03% modified the systolic and diastolic functions of intact porcine aortic roots.

Beating-Heart Mitral Valve Repair Using a Novel ePTFE Cordal Implantation Device: A Prospective Trial.

BACKGROUND: Conventional mitral valve (MV) operations allow direct anatomic assessment and repair on an arrested heart, but require cardiopulmonary bypass, aortic cross-clamping, sternotomy or thoracotomy, and cardioplegic cardiac arrest, and are associated with significant perioperative disability, and risks of morbidity and mortality. OBJECTIVES: This study evaluated safety and performance of a transesophageal echocardiographic-guided device designed to implant artificial expanded polytetrafluoroethylene (ePTFE) cords on mitral leaflets in the beating heart. METHODS: In a prospective multicenter study, 30 consecutive patients with severe degenerative mitral regurgitation (MR) were treated with a mitral valve repair system (MVRS) via small left thoracotomy. The primary (30-day) endpoint was successful implantation of cords with MR reduction to moderate or less. RESULTS: The primary endpoint was met in 27 of 30 patients (90%). Three patients required conversion to open mitral surgery. There were no deaths, strokes, or permanent pacemaker implantations. At 1 month, MR was mild or less in 89% (24 of 27) and was moderate in 11% (3 of 27). At 6 months, MR was mild or less in 85 % (22 of 26), moderate in 8% (2 of 26), and severe in 8% (2 of 26). Favorable cardiac remodeling at 6 months included decreases in end-diastolic (161 ± 36 ml to 122 ± 30 ml; p < 0.001) and left atrial volumes (106 ± 36 ml to 69 ± 24 ml; p < 0.001). The anterior-posterior mitral annular dimension decreased from 34.7 ± 5.8 mm to 28.2 ± 5.1 mm; p < 0.001 as did the mitral annular area (10.0 ± 2.7 cm2 vs. 6.9 ± 2.0 cm2; p < 0.0001). CONCLUSIONS: MVRS ePTFE cordal implantation can reduce the invasiveness and morbidity of conventional MV surgery. The device's safety profile is promising and prospective trials comparing the outcomes of the MVRS to conventional MV repair surgery are warranted. (CE Mark Study for the Harpoon Medical Device [TRACER]; NCT02768870).

Infective endocarditis in bicuspid aortic valve: atrioventricular block as sign of perivalvular abscess.

A 46-year-old man presenting with fever, peripheral edema, and chest pain was admitted to the emergency department. Electrocardiogram showed sinus tachycardia and first-degree atrioventricular block. Transesophageal echocardiogram showed infective endocarditis in bicuspid aortic valve, complicated with severe aortic regurgitation, ring abscess, and sinus-of-Valsalva aneurysm extending to mitroaortic fibrous continuity. The patient, who was unaware of his bicuspid aortic valve condition, reported having undergone an orthodontic procedure complicated with dental abscess 1 month prior, which was treated with combined clavulanate-amoxicillin antibiotic therapy. Blood cultures were positive for Bacteroides fragilis resistant to metronidazole. Intravenous antibiotic therapy was undertaken, with rapid resolution of fever. He eventually underwent successful aortic homograft implantation and mitral valve repair with residual first-degree atrioventricular block.

Decellularized Cryopreserved Allografts as Off-the-Shelf Allogeneic Alternative for Heart Valve Replacement: In Vitro Assessment Before Clinical Translation.

Cryopreserved allogeneic conduits are the elective biocompatible choice among currently available substitutes for surgical replacement in end-stage valvulopathy. However, degeneration occurs in 15 years in adults or faster in children, due to recipient's immunological reactions to donor's antigens. Here, human aortic valves were decellularized by TRICOL, based on Triton X-100 and sodium cholate, and submitted to standard cryopreservation (TRICOL-human aortic valves (hAVs)). Tissue samples were analyzed to study the effects of the combined procedure on original valve architecture and donor's cell removal. Residual amounts of nucleic acids, pathological microorganisms, and detergents were also investigated. TRICOL-hAVs proved to be efficaciously decellularized with removal of donor's cell components and preservation of valve scaffolding. Trivial traces of detergents, no cytotoxicity, and abrogated bioburden were documented. TRICOL-hAVs may represent off-the-shelf alternatives for both aortic and pulmonary valve replacements in pediatric and grown-up with congenital heart disease patients.

In vitro comparative assessment of decellularized bovine pericardial patches and commercial bioprosthetic heart valves.

Notwithstanding their wide exploitation, biological prosthetic heart valves are characterized by limited durability (10-15 years). The treatment of biological tissues with chemical crosslinking agents such as glutaraldehyde accounts for the enhanced risk of structural deterioration associated with the early failure of bioprosthetic valves. To overcome the shortcomings of the currently available solutions, adoption of decellularized biological tissues of animal origin has emerged as a promising approach. The present study aims to assess in vitro cardiovascular scaffolds composed of bovine pericardium decellularized with the novel TRITDOC (TRIton-X100 and TauroDeOxyCholic acid) procedure. The effects of the treatment have been assessed by means of histological, biomolecular, cellular, biochemical and biomechanical analyses. The TRITDOC procedure grants the complete decellularization of bovine pericardial scaffolds while preserving the extracellular matrix architecture and the biomechanical properties. With a dedicated ELISA test, the TRITDOC procedure has been proven to ensure the complete removal of the alphaGal antigen, responsible for hyperacute rejection and for long-term deterioration of xenogenic biomaterials. Static seeding of the acellular pericardial patches with human adipose-derived stem cells resulted in an evenly repopulated scaffold without signs of calcification. The in vitro cyto-/immuno-compatibility response of the TRITDOC-bovine pericardium was compared with glutaraldehyde-treated xenogenic pericardium collected from two bioprosthetic devices currently used in clinical practice: PERIMOUNT MAGNA and TRIFECTATM. TRITDOC-bovine pericardium exhibited lower complement activation, lower cytotoxicity and a lower tendency to secrete pro-inflammatory cytokines compared to the tested commercial bioprostheses. Therefore, TRITDOC-decellularized pericardium could be considered as possible candidate material for the production of prosthetic heart valves.

Nitinol flexigrip sternal closure system and standard sternal steel wiring: insight from a matched comparative analysis.

OBJECTIVE: We sought to assess the efficiency of two different sternal closure techniques in preventing sternal wound instability in high-risk patients. MATERIALS AND METHODS: Between January 2009 and February 2012, 2068 consecutive cardiac patients were prospectively collected in our database. The 561 patients in whom the thermoreactive nitilium clips (Flexigrip) have been used (group A) were matched 1 : 1 with 561 patients who received a standard parasternal wiring technique (group B) on 10 available risk factors known to affect sternal wound healing (age, age >75 years, sex, diabetes mellitus, cardiac procedure, obesity, re-intervention, cross-clamp, and total operative times). The study was completed with a cost analysis. RESULTS: The two groups were well matched, although different for bilateral internal thoracic harvesting, chronic obstructive pulmonary disease, renal insufficiency, and congestive heart failure, which were significantly more frequent in group A. At 30 days of follow-up, the association of wound complication and sternal instability was significantly less frequent in group A versus group B (0.2 versus 1.6%) (P = 0.04). Overall incidence of sternal wound complication was lower in group A (2 versus 3.5%) (P = 0.28). In the presence of wound infection, a sternal wound instability was never observed in group A (P = 0.06). Overall costs were €8,701,854 and €9,243,702 in groups A and B, respectively; thus the Flexigrip closure technique offered a €541,848 cost saving. CONCLUSIONS: Flexigrip use in high-risk patients showed a lower incidence of sternal wound instability with no need for sternal re-wiring in any case, even in the presence of wound infection.

Nitinol flexigrip sternal closure system and chest wound infections: insight from a comparative analysis of complications and costs.

BACKGROUND: We sought to assess the efficiency of two different sternal closure techniques in preventing sternal wound complications (SWC). A cost analysis was also considered. METHODS: Between January 2008 and April 2010, 1,644 consecutive cardiac surgery patients who underwent cardiac surgery in our institute were prospectively collected. A total of 1,072 patients received a standard parasternal wiring technique (group A), and 572 patients received a new method of sternal closure based on the use of thermoreactive nitillium clips (Flexigrip; Praesidia SRL, Bologna, Italy [group B]). We investigated, by a propensity matched analysis, whether the use of standard or nitinol clip closure would impact on sternal wound outcome. RESULTS: In all, 464 patients of each group were matched for 17 available risk factors. Overall incidence of SWC was significantly higher in group A (4.1% versus 1.7%; p=0.03). Sternal surgical revision to treat a thoracic instability was required in a significantly higher number of patients in group A (9 patients, 1.9%) and in none of group B (p=0.004). The incidence of sternal instability, secondary to wound infection, was significantly lower in group B (p=0.05). Overall costs were €7,407,296 and €6,896,432 in group A and group B, respectively. Thus, nitinol clip closure technique offered a €510,864 cost saving compared with standard steel wiring technique. CONCLUSIONS: The Flexigrip assured a lower incidence of SWC. The use of the nitinol clip favored an improved sternal closure technique preventing mediastinitis. Additionally, the nitinol clip system proved to be cost effective in cardiac surgery.

Differential distribution of structural components and hydration in aortic and pulmonary heart valve conduits: Impact of detergent-based cell removal.

Evaluation of the physiological performance of biological scaffolds for tissue engineering applications has been mostly based on biophysical and morphological methods, with limited attention paid to the quantitative contribution of the main structural components to native and/or treated valve assemblies. In the present study quantitation addressed the porcine leaflet, sinus and adjacent wall of aortic and pulmonary valved conduits before and after detergent-based cell removal. Collagen, elastin, glycosaminoglycan, lipid and water contents were expressed in terms of relative concentration and volume fraction in order to assess their effective contribution to the native tissue and to changes following decellularization procedures. The main findings were recognition of unexpectedly large water and underestimated collagen contents, differential distribution of elastin between the sectors and of glycosaminoglycan along the conduits and pulmonary scaffold destabilization upon cell removal, not found in the aortic case. Simultaneous investigations allowed consistent comparisons between native and decellularized tissues and added analytical knowledge crucial for designing realistic constitutive models. We have provided a quantitative structural foundation for earlier biomechanical findings in pulmonary leaflets and the basis for validation of theoretical assumptions still lacking the support of experimental evidence in both conduits. Future insights into the distribution of load-bearing components in human conduits are likely to provide indications important to optimize the surgical positioning of valvular grafts.