Clinical and preclinical evidence on the bioeffects and movement-related implications of photobiomodulation in the orthodontic tooth movement: A systematic review.

Photobiomodulation (PBM) has been demonstrated as a non-invasive and painless technique with great potential to accelerate orthodontic tooth movement (OTM). However, there is a great inconsistency among PBM protocols and reported outcomes, probably due to the poor translatability of preclinical knowledge into early clinical practice. Hence, this review aims to fill this gap by establishing the state-of-the-art on both preclinical and clinical applications of PBM, and by comprehensively discussing the most suitable stimulation protocols described in the literature. This review was conducted according to PRISMA guidelines. A bibliographic search was carried out in the PubMed, Scopus and Cochrane databases using a combination of keywords. Only studies written in English were eligible and no time limit was applied. A total of 69 studies were selected for this review. The revised literature describes that PBM can effectively reduce orthodontic treatment time and produce analgesic and anti-inflammatory effects. We found that PBM of 640 ± 25, 830 ± 20 and 960 ± 20 nm, delivered at a minimum energy density per irradiation point of 5 J/cm2 daily or every other day sessions is robustly associated with increased tooth movement rate. Pain relief seems to be achieved with lower irradiation doses compared to those required for OTM acceleration. For the first time, the bioeffects induced by PBM for the acceleration of OTM are comprehensively discussed from a translational point of view. Collectively, the evidence from preclinical and clinical trials supports the use of PBM as a coadjuvant in orthodontics for enhancing tooth movement and managing treatment-associated discomfort. Overall, the revised studies indicate that optimal PBM parameters to stimulate tissue remodelling are wavelengths of 830 ± 20 nm and energy densities of 5-70 J/cm2 applied daily or every other day can maximize the OTM rate, while lower doses (up to 16 J/cm2 per session) delivered in non-consecutive days seem to be optimal for inducing analgesic effects. Future research should focus on optimizing laser parameters and treatment protocols customized for tooth and movement type. By fine-tuning laser parameters, clinicians can potentially reduce treatment times, improve patient comfort and achieve more predictable outcomes, making orthodontic care more efficient and patient-friendly, thus consolidating PBM usage in orthodontics.

The functional properties of a xyloglucanase (GH12) of Aspergillus terreus expressed in Aspergillus nidulans may increase performance of biomass degradation.

Filamentous fungi are attractive hosts for heterologous protein expression due to their capacity to secrete large amounts of enzymes into the extracellular medium. Xyloglucanases, which specifically hydrolyze xyloglucan, have been recently applied in lignocellulosic biomass degradation and conversion in many other industrial processes. In this context, this work aimed to clone, express, and determine the functional properties of a recombinant xyloglucanase (AtXEG12) from Aspergillus terreus, and also its solid-state (SSF) and submerged (SmF) fermentation in bioreactors. The purified AtXEG12 showed optimum pH and temperature of 5.5 and 65 °C, respectively, demonstrating to be 90 % stable after 24 h of incubation at 50 °C. AtXEG12 activity increased in the presence of 2-mercaptoethanol (65 %) and Zn+2 (45 %), while Cu+2 and Ag+ ions drastically decreased its activity. A substrate assay showed, for the first time for this enzyme's family, xylanase activity. The enzyme exhibited high specificity for tamarind xyloglucan (K M 1.2 mg mL-1) and V max of 17.4 µmol min-1 mg-1 of protein. The capillary zone electrophoresis analysis revealed that AtXEG12 is an endo-xyloglucanase. The heterologous xyloglucanase secretion was greater than the production by wild-type A. terreus cultivated in SmF. On the other hand, AtXEG12 activity reached by SSF was sevenfold higher than values achieved by SmF, showing that the expression of recombinant enzymes can be significantly improved by cultivation under SSF.

Optimization of a Photobiomodulation Protocol to Improve the Cell Viability, Proliferation and Protein Expression in Osteoblasts and Periodontal Ligament Fibroblasts for Accelerated Orthodontic Treatment.

Numerous pieces of evidence have supported the therapeutic potential of photobiomodulation (PBM) to modulate bone remodeling on mechanically stimulated teeth, proving PBM's ability to be used as a coadjuvant treatment to accelerate orthodontic tooth movement (OTM). However, there are still uncertainty and discourse around the optimal PBM protocols, which hampers its optimal and consolidated clinical applicability. Given the differential expression and metabolic patterns exhibited in the tension and compression sides of orthodontically stressed teeth, it is plausible that different types of irradiation may be applied to each side of the teeth. In this sense, this study aimed to design and implement an optimization protocol to find the most appropriate PBM parameters to stimulate specific bone turnover processes. To this end, three levels of wavelength (655, 810 and 940 nm), two power densities (5 and 10 mW/cm2) and two regimens of single and multiple sessions within three consecutive days were tested. The biological response of osteoblasts and periodontal ligament (PDL) fibroblasts was addressed by monitoring the PBM's impact on the cellular metabolic activity, as well as on key bone remodeling mediators, including alkaline phosphatase (ALP), osteoprotegerin (OPG) and receptor activator of nuclear factor κ-B ligand (RANK-L), each day. The results suggest that daily irradiation of 655 nm delivered at 10 mW/cm2, as well as 810 and 940 nm light at 5 mW/cm2, lead to an increase in ALP and OPG, potentiating bone formation. In addition, irradiation of 810 nm at 5 mW/cm2 delivered for two consecutive days and suspended by the third day promotes a downregulation of OPG expression and a slight non-significant increase in RANK-L expression, being suitable to stimulate bone resorption. Future studies in animal models may clarify the impact of PBM on bone formation and resorption mediators for longer periods and address the possibility of testing different stimulation periodicities. The present in vitro study offers valuable insights into the effectiveness of specific PBM protocols to promote osteogenic and osteoclastogenesis responses and therefore its potential to stimulate bone formation on the tension side and bone resorption on the compression side of orthodontically stressed teeth.

Biological alterations associated with the orthodontic treatment with conventional appliances and aligners: A systematic review of clinical and preclinical evidence.

Background&objectives: Mechanical forces applied during an orthodontic tooth movement (OTM) propel several biochemical and molecular responses in the periodontal ligament and alveolar bone. Here, we compile the existing clinical and preclinical evidence on these biological changes, aiming to provide a comprehensive discussion on the influence of the mechanical parameters of the OTM in the biological profile of the periodontium. Material and methods: This systematic integrative review was conducted according to PICOS strategy and PRISMA guidelines. A bibliographic search was performed in three electronic databases (PubMed, Scopus, and Web of Science) to find research articles published until 2023 and written in English. This search resulted in a total of 2279 publications, which were independently assessed by two evaluators using appropriate tools. Results: Forty-six studies were selected for this review. These revealed that compression, and stretching of the periodontal ligament fibers and cells are observed in the initial phase of the OTM. Specifically, on the tension side, high levels of IL-1ß, OPG, and TIMPs are identified. On the compression side, an increase of RANKL, RANK, and MMPs levels predominate. Conclusion: This paper describes the release profile of common biomarkers according to the orthodontic protocol, suggesting the most appropriate parameters to keep the teeth and their supporting structures healthy. Overall, this manuscript provides a better understanding of the OTM-associated biological phenomena, also highlighting the importance of early evaluation of oral health, and thus it contributes as a fundamental basis for the development of more effective and safe orthodontic treatments with conventional appliances and aligners.

Production of recombinant lytic polysaccharide monooxygenases and evaluation effect of its addition into Aspergillus fumigatus var. niveus cocktail for sugarcane bagasse saccharification.

Lignocellulosic biomass is a promising alternative for producing biofuels, despite its recalcitrant nature. There are microorganisms in nature capable of efficiently degrade biomass, such as the filamentous fungi. Among them, Aspergillus fumigatus var. niveus (AFUMN) has a wide variety of carbohydrate-active enzymes (CAZymes), especially hydrolases, but a low number of oxidative enzymes in its genome. To confirm the enzymatic profile of this fungus, this study analyzed the secretome of AFUMN cultured in sugarcane bagasse as the sole carbon source. As expected, the secretome showed a predominance of hydrolytic enzymes compared to oxidative activity. However, it is known that hydrolytic enzymes act in synergy with oxidative proteins to efficiently degrade cellulose polymer, such as the Lytic Polysaccharide Monooxygenases (LPMOs). Thus, three LPMOs from the fungus Thermothelomyces thermophilus (TtLPMO9D, TtLPMO9H, and TtLPMO9O) were selected, heterologous expressed in Aspergillus nidulans, purified, and used to supplement the AFUMN secretome to evaluate their effect on the saccharification of sugarcane bagasse. The saccharification assay was carried out using different concentrations of AFUMN secretome supplemented with recombinant T. thermophilus LPMOs, as well as ascorbic acid as reducing agent for oxidative enzymes. Through a statistic design created by Design-Expert software, we were able to analyze a possible cooperative effect between these components. The results indicated that, in general, the addition of TtLPMO9D and ascorbic acid did not favor the conversion process in this study, while TtLPMO9O had a highly significant cooperative effect in bagasse saccharification compared to the control using only AFUMN secretome.

Accuracy of Invisalign® on Upper Incisors: A Systematic Review.

The current systematic review appraises the effectiveness of the types of tooth movements performed with Invisalign® clear aligner on the maxillary incisors. An electronic literature search of published trials was performed through PubMed, LILACS, Scopus, Cochrane Library, and Web of Science databases, and selected journals, from 2009 to 2020. Out of 291 references, five relevant publications were identified for analysis: four studies were performed retrospectively and one prospectively, all non-randomized. Despite the limited set of selected articles, the sample size is significant, with 148 subjects included in the reviewed studies involving the orthodontic treatment of upper incisors. We concluded that movements with the Invisalign® clear aligner on the upper incisors present distinct accuracy, possibly related with movement complexity; intrusion of the incisors has low accuracy (in some cases, 0% of accuracy was reported when the tooth extruded), while incisor extrusion exhibit some of the highest accuracy values reported in the included studies (45%-142%, when the achieved movement was greater than the predicted). Besides, axial (i.e., torque and tip) and horizontal (i.e., translation and rotation) movements are usually effective, with accuracy values between 39%-156% and 42%-79%, respectively. Overall, we determined that the efficiency of aligner to reach the desired movements in the upper incisors was low, as often refinements were required in the included studies. The use of aligner features must be more often considered to improve movement accuracy.

Evaluation of the apical sealing of an eggshell hydroxyapatite-based sealer.

Background: The success of endodontic treatment can be influenced by the type of endodontic sealer used, as certain sealers may be prone to apical microleakage, leading to treatment failure. The limitations of currently available sealers necessitate the development of new materials to improve the success rate of endodontic treatment. Therefore, the objective of this study was to assess the apical microleakage of newly developed hydroxyapatite-based endodontic sealers, including one derived from eggshells, and compare them with other commercially available sealers. Material and Methods: Eighty-five extracted human upper anterior teeth were selected for this study. The teeth were divided into 5 experimental groups and 2 control groups. The experimental groups were designated as follows: (1) HPSINT - obturated with gutta-percha cone and synthetic hydroxyapatite-based sealer, (2) BIOC - obturated with gutta-percha cone and Bio C-Sealer sealer, (3) AHPLUS-BC - obturated with gutta-percha cone and AHPLUS Bioceramic sealer, (4) AHP - obturated with gutta-percha cone and AHPLUS sealer, and (5) HPO - obturated with gutta-percha cone and sealer based on hydroxyapatite extracted from eggshells. Additionally, there were positive and negative control groups consisting of instrumented teeth filled with gutta-percha cones without any sealer and instrumented teeth without any filling, respectively. Methylene blue dye penetration was used to assess apical microleakage. Descriptive statistical analysis and Shapiro-Wilk normality test were applied to the observed results. As the samples followed a normal distribution, the ANOVA test was applied. Results: The control groups confirmed the validity of the experimental method, while the experimental groups showed varying degrees of dye penetration. The group obturated with Bio C-Sealer exhibited the highest mean apical microleakage, while AHPLUS Bioceramic sealer demonstrated lower mean than AHPLUS sealer and sealer based on hydroxyapatite extracted from eggshells (p<0.05). Finally, there was no difference between the synthetic hydroxyapatite-based sealer and AHPLUS Bioceramic sealer, AHPLUS sealer and sealer based on hydroxyapatite extracted from eggshells (p>0.05). No significant difference was observed between the hydroxyapatite-based sealers and the AHPLUS-BC sealer. Conclusions: The results of this study suggest that the newly developed hydroxyapatite-based endodontic sealers, including the one derived from eggshells, may have a lower risk of apical microleakage compared to other commercially available sealers. These findings highlight the potential of hydroxyapatite-based sealers to improve the success rate of endodontic treatment. Further research and clinical studies are warranted to validate these results and explore the long-term effects of these novel sealers. Key words:Endodontic treatment, apical microleakage, endodontic sealer, hydroxyapatite, eggshell-derived sealer.

Human Interleukin-1ß Profile and Self-Reported Pain Monitoring Using Clear Aligners with or without Acceleration Techniques: A Case Report and Investigational Study.

Introduction: There is a growing demand for more aesthetic, comfortable, and faster orthodontic treatments, and clear aligners emerged as a solution to fulfill this need. However, the effectiveness of clear aligners to treat complex malocclusions is yet contentious. The use of acceleration methods could improve the efficacy of clear aligners by stimulating cells' mechanobiology through numerous pathways, but this hypothesis is still poorly explored. Objective: We aimed to monitor the release profile of an inflammatory marker-the interleukin-1ß-and to evaluate its relationship with self-reported pain scores with and without the use of acceleration techniques during an orthodontic treatment requiring difficult tooth movements with clear aligners. Case Report. Here, we report a case of a 46-year-old female patient who presented functional and aesthetic complaints. Intraoral examination revealed a diminished overjet and overbite, rotation of teeth 45 and 24, absence of teeth 25, 35, and 36, buccolingual dislocation of tooth 21, a tendency to a Class III malocclusion, and a 2 mm left deviation of the lower midline. This study is divided into three stimulation phases: no stimulation, mechanical vibration stimulation, and photobiomodulation. Interleukin-1ß levels in gingival crevicular fluid samples from the pressure side of six selected teeth were evaluated at four time points after the orthodontic treatment onset. Pain monitoring in those teeth was performed using a visual analogue scale at the same time points. Results: Interleukin-1ß protein production peaked 24 h after treatment onset. Complex movements were associated with increased self-reported pain. Conclusion: Clear aligners show limitations in solving complex tooth movements, even when combined with acceleration. The development of customized and programmable stimulation microdevices integrated into "smart aligners," which could be designed to specifically stimulate the direction of movement and stimulation parameters and could constitute a solution to optimize the orthodontic tooth movement with clear aligners.

Chloride and sodium ion concentrations in saliva and sweat as a method to diagnose cystic fibrosis.

OBJECTIVE: Cystic fibrosis diagnosis is dependent on the chloride ion concentration in the sweat test (≥60mEq/mL - recognized as the gold standard indicator for cystic fibrosis diagnosis). Moreover, the salivary glands express the CFTR protein in the same manner as sweat glands. Given this context, the objective was to verify the correlation of saliva chloride concentration and sweat chloride concentration, and between saliva sodium concentration and sweat sodium concentration, in patients with cystic fibrosis and healthy control subjects, as a tool for cystic fibrosis diagnosis. METHODS: There were 160 subjects enrolled: 57/160 (35.70%) patients with cystic fibrosis and two known CFTR mutations and 103/160 (64.40%) healthy controls subjects. Saliva ion concentration was analyzed by ABL 835 Radiometer® equipment and, sweat chloride concentration and sweat sodium concentration, respectively, by manual titration using the mercurimetric procedure of Schales & Schales and flame photometry. Statistical analysis was performed by the chi-squared test, the Mann-Whitney test, and Spearman's correlation. Alpha=0.05. RESULTS: Patients with cystic fibrosis showed higher values of sweat chloride concentration, sweat sodium concentration, saliva chloride concentration, and saliva sodium concentration than healthy controls subjects (p-value<0.001). The correlation between saliva chloride concentration and sweat chloride concentration showed a positive Spearman's Rho (correlation coefficient)=0.475 (95% CI=0.346 to 0.587). Also, the correlation between saliva sodium concentration and sweat sodium concentration showed a positive Spearman's Rho=0.306 (95% CI=0.158 to 0.440). CONCLUSIONS: Saliva chloride concentration and saliva sodium concentration are candidates to be used in cystic fibrosis diagnosis, mainly in cases where it is difficult to achieve the correct sweat amount, and/or CFTR mutation screening is difficult, and/or reference methods for sweat test are unavailable to implement or are not easily accessible by the general population.

Evaluation of protein undernourishment on the condylar process of the Wistar rat mandible correlation with insulin receptor expression.

UNLABELLED: The mandible condylar process cartilage (CP) of Wistar rats is a secondary cartilage and acts as a mandibular growth site. This phenomenon depends on adequate proteins intake and hormone actions, including insulin. OBJECTIVES: The present study evaluated the morphological aspects and the expression of the insulin receptor (IR) in the cartilage of the condylar process (CP) of rats subjected to protein undernourishment. MATERIAL AND METHODS: The nourished group received a 20% casein diet, while the undernourished group (U) received a 5% casein diet. The re-nourished groups, R and RR, were used to assess the effects of re-nutrition during puberty and adulthood, respectively. CPs were processed and stained with picro-sirius red, safranin-O and azocarmine. Scanning electron microscopy and immunohistochemistry were also performed. RESULTS: The area of the CP cartilage and the number of cells in the chondroblastic layer decreased in the U group, as did the thickness of the CP layer in the joint and hypertrophic layer. Renourishment during the pubertal stage, but not during the adult phase, restored these parameters. The cell number was restored when re-nutrition occurred in the pubertal stage, but not in the adult phase. The extracellular matrix also decreased in the U group, but was restored by re-nutrition during the pubertal stage and further increased in the adult phase. IR expression was observed in all CPs, being higher in the chondroblastic and hypertrophic cartilage layers. The lowest expression was found in the U and RR groups. CONCLUSIONS: Protein malnutrition altered the cellularity, the area, and the fibrous cartilage complex, as well as the expression of the IRs.

Chloride and sodium ion concentrations in saliva and sweat as a method to diagnose cystic fibrosis / Dosagem da concentração dos íons cloreto e sódio na saliva e no suor para o reconhecimento de pacientes com fibrose cística

Abstract Objective: Cystic fibrosis diagnosis is dependent on the chloride ion concentration in the sweat test (≥ 60 mEq/mL - recognized as the gold standard indicator for cystic fibrosis diagnosis). Moreover, the salivary glands express the CFTR protein in the same manner as sweat glands. Given this context, the objective was to verify the correlation of saliva chloride concentration and sweat chloride concentration, and between saliva sodium concentration and sweat sodium concentration, in patients with cystic fibrosis and healthy control subjects, as a tool for cystic fibrosis diagnosis. Methods: There were 160 subjects enrolled: 57/160 (35.70%) patients with cystic fibrosis and two known CFTR mutations and 103/160 (64.40%) healthy controls subjects. Saliva ion concentration was analyzed by ABL 835 Radiometer® equipment and, sweat chloride concentration and sweat sodium concentration, respectively, by manual titration using the mercurimetric procedure of Schales & Schales and flame photometry. Statistical analysis was performed by the chi-squared test, the Mann -Whitney test, and Spearman's correlation. Alpha = 0.05. Results: Patients with cystic fibrosis showed higher values of sweat chloride concentration, sweat sodium concentration, saliva chloride concentration, and saliva sodium concentration than healthy controls subjects (p-value < 0.001). The correlation between saliva chloride concentration and sweat chloride concentration showed a positive Spearman's Rho (correlation coefficient) = 0.475 (95% CI = 0.346 to 0.587). Also, the correlation between saliva sodium concentration and sweat sodium concentration showed a positive Spearman's Rho = 0.306 (95% CI = 0.158 to 0.440). Conclusions: Saliva chloride concentration and saliva sodium concentration are candidates to be used in cystic fibrosis diagnosis, mainly in cases where it is difficult to achieve the correct sweat amount, and/or CFTR mutation screening is difficult, and/or reference methods for sweat test are unavailable to implement or are not easily accessible by the general population.

Resumo Objetivo: O diagnóstico da fibrose cística depende do valor da concentração de íons de cloreto no teste do suor (≥ 60 mEq/mL - reconhecido como o indicador-padrão para o diagnóstico da doença). Além disso, as glândulas salivares expressam a proteína RTFC igualmente às glândulas sudoríparas. Nesse contexto, nosso objetivo foi verificar a correlação da concentração de cloreto na saliva e a concentração de cloreto no suor e entre a concentração de sódio na saliva e a concentração de sódio no suor em pacientes com fibrose cística e indivíduos controles saudáveis, como uma ferramenta para diagnóstico de fibrose cística. Métodos: Contamos com a participação de 160 indivíduos [57/160 (35,70%) com fibrose cística e duas mutações no gene RTFC conhecidas e 103/160 (64,40%) indivíduos controles saudáveis]. A concentração de íons na saliva foi analisada pelo equipamento ABL 835 da Radiometer® e a concentração de cloreto no suor e sódio no suor, respectivamente, por titulação manual utilizando o método mercurimétrico de Schales & Schales e fotometria de chama. A análise estatística foi realizada pelo teste qui-quadrado, pelo teste de Mann-Whitney e pela correlação de Spearman. Alpha = 0,05. Resultados: Os pacientes com fibrose cística apresentaram maiores valores na concentração de cloreto no suor, concentração de sódio no suor, concentração de cloreto na saliva e concentração de sódio na saliva do que os indivíduos-controle saudáveis (valor de p < 0,001). A correlação entre as concentrações de cloreto na saliva e cloreto no suor mostrou Rho de Spearman (coeficiente de correlação) positivo = 0,475 (IC de 95% = 0,346 a 0,587). Além disso, a correlação entre concentração de sódio na saliva e concentração de sódio no suor mostrou Rho de Spearman positivo = 0,306 (IC de 95% = 0,158 a 0,440). Conclusões: A concentração de cloreto na saliva e a concentração de sódio na saliva são candidatas a ser usadas como diagnóstico de fibrose cística, principalmente em casos em que é difícil atingir a quantidade correta de suor, e/ou o exame da mutação RTFC é difícil e/ou o método de referência para o teste do suor não se encontra disponível ou não é de fácil acesso ao público em geral.

Oral health in patients with cystic fibrosis

The oral health in patients with cystic fibrosis (CF) is not well studied. Aim: In this context, we describe the frequency of dental problems and performed the description of plaque index and gingival index in patients with CF. Methods: We performed a descriptive study about oral health enrolling 94 patients with CF. Results: The CF diagnosis was done considering the sweat test with chloride values ≥ 60 mmol/L. The permanent dentition was predominant in 57/94 (60.64%) patients with CF ­ 28/57 (49.12%) caries, 57/57 (100%) filled teeth and 1/57 (1.75%) missing tooth. Deciduous teeth occurred in 37/94 (39.36%) patients with CF ­ 22/37 (59.46%) carious, 29/37 (78.38%) exfoliated teeth, 20/37 (54.05%) filled teeth. Also, the plaque index and gingival index had scored less than one in many cases (≥ 50% of the cases). Conclusions: Patients with CF showed oral health problems with prevalence comparable to that of the normal population and low values in the plaque index and gingival index

Saliva as a potential tool for cystic fibrosis diagnosis.

BACKGROUND: Saliva and sweat are modified by cystic fibrosis (CF). In both cases the chloride and sodium ion concentrations for healthy subjects and CF patients differ, this representing a possible alternative tool for CF diagnosis. In this context, the aim of this study was to compare the concentrations of these ions in saliva samples taken from CF patients and healthy subjects. METHODS: A case-control study was carried out at a university CF center, in which the saliva samples were analyzed on an ABL 835 Radiometer® to determine the ion concentration. RESULTS: For the CF patients (n = 80) the values for the biochemical parameters of chloride, potassium and sodium ion concentration were higher (p < 0.009) and the volume and pH of the saliva were lower than in the case of healthy subjects (p < 0.009). For the healthy subjects group (n = 84) versus CF patients, according to the ROC curve, the values for sodium were: cutoff: 13.5 mmol/L, sensitivity: 73.4%, specificity: 70.6%; and for chloride: cutoff: 20 mmol/L, sensitivity: 68.1%, specificity: 72.9%. CONCLUSIONS: The chloride and sodium concentrations in the saliva samples were higher for CF patients in comparison with healthy subjects. Thus, saliva as a tool for CF diagnosis can be considered a new challenge, and a population study including patients in all age classes needs to be performed, in different countries over the world, to extend the database to include a broad spectrum of information in order to identify normal ion concentration ranges for CF patients according to age, genotype and environment. VIRTUAL SLIDES: The virtual slide(s) for this article can be found here: http://www.diagnosticpathology.diagnomx.eu/vs/2614233148750145.

Evaluation of protein undernourishment on the condylar process of the Wistar rat mandible correlation with insulin receptor expression

The mandible condylar process cartilage (CP) of Wistar rats is a secondary cartilage and acts as a mandibular growth site. This phenomenon depends on adequate proteins intake and hormone actions, including insulin. Objectives The present study evaluated the morphological aspects and the expression of the insulin receptor (IR) in the cartilage of the condylar process (CP) of rats subjected to protein undernourishment. Material and Methods The nourished group received a 20% casein diet, while the undernourished group (U) received a 5% casein diet. The re-nourished groups, R and RR, were used to assess the effects of re-nutrition during puberty and adulthood, respectively. CPs were processed and stained with picro-sirius red, safranin-O and azocarmine. Scanning electron microscopy and immunohistochemistry were also performed. Results The area of the CP cartilage and the number of cells in the chondroblastic layer decreased in the U group, as did the thickness of the CP layer in the joint and hypertrophic layer. Renourishment during the pubertal stage, but not during the adult phase, restored these parameters. The cell number was restored when re-nutrition occurred in the pubertal stage, but not in the adult phase. The extracellular matrix also decreased in the U group, but was restored by re-nutrition during the pubertal stage and further increased in the adult phase. IR expression was observed in all CPs, being higher in the chondroblastic and hypertrophic cartilage layers. The lowest expression was found in the U and RR groups. Conclusions Protein malnutrition altered the cellularity, the area, and the fibrous cartilage complex, as well as the expression of the IRs. .

Effect of Er: YAG laser and diamond drill on hybrid layer morphology obtained with self-etch adhesive - analysis by SEM and confocal laser scanning microscopy (CLSM)

ABSTRACT Introduction and Objective: This study aimed to evaluate the effect of Er:YAG (L) and diamond drills (DD) on: 1) the microshear bond strength (MPa); 2) the adhesive interface of two-step (TS) - Adper Scotchbond Multipurpose and one-step (OS) adhesives - Adper EasyOne, both from 3M ESPE. Material and methods: According to the preparation condition and adhesives, the samples were divided into four groups: DD_TS (control); DD_OS; L_TS and L_OS. 60 bovine incisors were randomly divided into experimental and groups: 40 for microshear bond strength (n = 10) and 20 for the adhesive interface morphology [6 to measure the thickness of the hybrid layer (HL) and length of tags (t) by CLSM (n = 3); 12 to the adhesive interface morphology by SEM (n = 3) and 2 to illustrate the effect of the instruments on dentine by SEM (n = 1)]. To conduct the microshear bond strength test, four cylinders (0.7 mm in diameter and 1 mm in height with area of adhesion of 0.38 mm) were constructed with resin composite (Filtek Z350 XT - 3M ESPE) on each dentin surface treated by either L or DD and after adhesives application. Microshear bond strength was performed in universal testing machine (EMIC 2000) with load cell of 500 kgf and a crosshead speed of 0.5 mm / min. Adhesive interface was characterized by thickness of hybrid layer (HL) and length of tags (t) in nm, with the aid of UTHSCSA ImageTool software. Results: Microshear bond strength values were: L_TS 34.10 ± 19.07, DD_TS 24.26 ± 9.35, L_OS 33.18 ± 12.46, DD_OS 21.24 ± 13.96. Two-way ANOVA resulted in statistically significant differences only for instruments (p = 0.047). Mann-Whitney identified the instruments which determined significant differences for HL thickness and tag length (t). Concerning to the adhesive types, these differences were only observed for (t). Conclusion: It can be concluded that 1) laser Er:YAG results in higher microshear bond strength values regardless of the adhesive system (TS and OS); 2) the tags did not significant affect the microshear bond strength; 3) the adhesive interface was affected by both the instruments for cavity preparation and the type of adhesive system used.

A six-year retrospective study of maxillofacial fractures from radiographic findings in Brazil / Estudo retrospectivo de seis anos de fraturas maxilofaciais provenientes de achados radiográficos realizado no Brasil

Objective: this study aimed to present the causes and prevalence of maxillofacial fractures that occurred in the region of Araraquara-SP ? Brazil, during a 6-year period. Methods: information regarding age, gender, etiology, and maxillofacial fracture site, as well as type of radiographic examination were evaluated. Data were gathered from the radiographic examination and radiographic report of the Division of Dentomaxillofacial Radiology, and from charts of the Division of Oral and Maxillofacial Surgery of patients attending for maxillofacial fractures from 2004 to 2009. A descriptive statistical analysis was developed using Epi-Info 3.5.1. Results: from a total of 11,728 patients assisted, 407 patients presented maxillofacial fractures. The prevalent age ranged from 21 to 30 years old. From the total patients, 322 were men and 85 were women (ratio of men to women was 3.8:1). Panoramic radiography (n = 306) was most frequently used to observe maxillofacial fractures. Mandibular fractures were frequent in the body of the mandible (n = 127), followed by symphysis (n = 102), and the prevalent cause was traffic accidents (n = 161). Conclusion: more than half of affected individuals were younger than 40 years of age. The body of the mandible was the most common fracture location vi sualized by panoramic radiography for traffic accidentsand fights.

Efeito do laser ER:YAG e ponta diamantada na morfologia da camada híbrida obtida com um adesivo autocondicionante: resistência de união ao microcisalhamento análise por MEV e MLCF / Effect of laser ER: YAG and a diamond bur in the morphology of the hybrid layer obtained with a self-etching adhesive. SEM analysis and MLCF and bond strength microshear

Este estudo tem como objetivo avaliar o efeito de laser de Er: YAG (L) e ponta diamantada (B) sobre a força de resistência ao microcisalhamento (MPa) e o efeito sobre a interface adesiva de adesivos condiciona e lava (CL) ­ Adper Scotchbond Multiuso e autocondicionante (CS) ­ Adper EasyOne, ambos da 3M ESPE. Foram constituídos 4 grupos segundo instrumentos e adesivos: B_CL (controle); B_CS; L_CL e L_CS. 60 incisivos bovinos foram randomicamente divididos nos experimentos e grupos: 40 para força de resistência ao microcisalhamento (n=10) e 20 para morfologia da interface adesiva (6 para mensuração da espessura da camada hibrida (CH) e comprimento de tags (t) por MLCF (n=3); 12 para morfologia da interface adesiva por MEV (n=3) e 2 para ilustração o efeito dos instrumentos sobre dentina por MEV (n=1). Para o ensaio de microcisalhamento foram confeccionados 4 cilindros de resina composta Filtek Z350 XT ­ 3M ESPE (0,7 mm de diâmetro por 1 mm de altura e área de adesão de 0,38 mm2 ) sobre cada superfície de dentina tratada pelos instrumentos e adesivos. O ensaio de resistência de união ao microcisalhamento foi realizado em máquina de ensaio universal EMIC 2000, com célula de carga de 500 Kgf e velocidade de 0,5 mm/min. A interface adesiva foi caracterizada pela espessura da camada hibrida (CH) e comprimento de tags (t) em µm, com o software UTHSCSA Imagetool. Os valores de resistência adesiva ao microcisalhamento foram L_CL 34,10 ± 19,07 MPa, B_CL 24,26 ± 9,35 MPa, L_CN 33,18 ± 12,46 MPa, B_CN 21,24 ± 13,96 MPa. Anova two-way resultou em diferença estatisticamente significativa somente para instrumentos (p=0,047). Teste de Mann-Whitney identificou os instrumentos determinam diferenças significativas para de espessura de CH e comprimento de (t). Para adesivos estas diferenças só foram observadas para (t). Pode-se concluir que 1) Laser de Er:YAG resulta em maiores valores de resistência adesiva ao microcisalhamento, independente do sistema adesivo utilizado (CL ou CS). 2) Os tags não tem efeito significativo na resistência adesiva ao microcisalhamento. 3) A interface adesiva é afetada tanto pelos instrumentos utilizados para o preparo cavitário como pelo tipo de sistema adesivo empregado

This study aims to evaluate the effect of Er: YAG (L) and bur (B) on the strength of resistance microshear (MPa) and the effect on the interface adhesive stickers and wash conditions (CL) - Adper Scotchbond Multipurpose and self (CS) - Adper EasyOne, both from 3M ESPE. Were formed 4 groups according tools and adhesives: B_CL (control); B_CS; L_CL and L_CS. 60 bovine incisors were randomly divided into experimental and groups: 40 to force microshear resistance (n = 10) and 20 for the adhesive interface morphology (6 to measure the thickness of the hybrid layer (CH) and length of tags (t) by MLCF (n = 3); 12 to the adhesive interface morphology by SEM (n = 3) and 2 to illustrate the effect of the instruments on dentine by SEM (n = 1). Microshear For testing four cylinders were fabricated composite Filtek Z350 XT - 3M ESPE (0.7 mm in diameter and 1 mm in height and area of adhesion of 0.38 mm) on each dentin surface treated by tools and adhesives. Testing of bond strength was performed in microshear FDMS universal testing machine 2000 with a load cell of 500 kgf and a speed of 0.5 mm / min. Adhesive interface was characterized by layer thickness hybrid (HC) and length of tags (t) in nm, with software UTHSCSA ImageTool. Values of bond strength to microshear L_CL were 34.10 ± 19.07, 24.26 ± 9.35 B_CL, L_CN 33.18 ± 12.46, 21.24 ± 13.96 B_CN. Anova two- way resulted in statistically significant only for instruments (p = 0.047). Mann-Whitney identified instruments to determine significant differences CH thickness and length (t). adhesives for these differences were only observed for (t). It can be concluded that 1) Laser Er: YAG results in higher bond strength to the microshear, regardless of the adhesive system (CL and CS). 2) The tags have no significant effect on bond strength to microshear. 3) The adhesive interface is affected by both instruments for cavity preparation and the type of adhesive system used

Correção da mordida aberta anterior mediante extração de molares: relato de caso clínico / Correction of anterior open bite through molars extraction: report of a clinical case

Por ser considerada uma má oclusão de etiologia multifatorial e com grande potencial de recidiva, a mordida aberta anterior apresenta tratamento complexo e de estabilidade pós-tratamento duvidosa. O prognóstico de tratamento está relacionado ao padrão de crescimento esquelético, o qual irá definir a forma de tratamento adotada. A extração de molares pode auxiliar na correção da mordida aberta anterior, contribuindo para o aumento do trespasse vertical e para a estabilidade pós-tratamento. O presente artigo ilustra a extração dos primeiros molares permanentes superiores e inferiores para correção de uma mordida aberta anterior esquelética em uma paciente adulta. O controle de cinco anos pós-tratamento mostrou boa estabilidade.

Prótese parafusada por lingual: uma alternativa protética para implantes vestibularizados: relato de caso clínico / Lingual screw-retained prostheses: an alternative solution for buccal positioned implants: a case report

A Implantodontia tem demonstrado que a colocação de implantes não é uma tarefa das mais difíceis. A dificuldade reside em posicionar os implantes adequadamente para instalação, de maneira que o clínico possa optar pelo melhor sistema de retenção, de acordo com sua opinião: parafusada, cimentada ou cimentada-parafusada. Os problemas gerados por implantes malposicionados têm trazido muitas complicações na hora de confeccionar as próteses. Na tentativa de ilustrar uma forma de resolução desses problemas, o presente trabalho descreve um caso clínico de prótese unitária parafusada por lingual. Na região do primeiro molar inferior esquerdo, um implante – que havia sido instalado com inclinação vestibular – teve sua posição corrigida por meio desse sistema de retenção de prótese. Assim, conferiu-se ao trabalho protético estética vestibular sem aparecimento de cinta metálica, estética oclusal semelhante à das coroas cimentadas e, ao mesmo tempo, reversibilidade.

Implantology has shown that the insertion of implants is not one of the most difficult task. The difficulty lies in properly positioning the implant to be installed so that the clinician can choose the best retention system, according to his opinion: screwed, cemented or screwed-cemented. The problems caused by misplaced implants have brought many complications at the time of manufacturing the prosthesis. In an attempt to illustrate one way of solving these problems, this paper describes a clinical case of a single crow prosthesis screwed by lingual. In the region of the lower left first molar, an implant - which had been installed with vestibular inclination - had its position adjusted by means of this prosthesis retention system. Thus, it was given to prosthetic work buccal aesthetics appearance without showing the metallic collar, occlusal esthetics similar to that of cemented crowns and, at the same time, reversibility.