Effect of accelerated stability on the physical, chemical, and mechanical properties of experimental bleaching gels containing different bioadhesive polymers.

OBJECTIVE: To evaluate the physical-chemical (weight, pH, quantification of hydrogen peroxide) and mechanical (texture profile and rheology tests) properties of the experimental bleaching gel based on the bioadhesive polymer Aristoflex® AVC, after accelerated stability testing. MATERIALS AND METHODS: A total of 300 syringes of bleaching gels were divided into 5 groups (n = 60): Whiteness Perfect® 10%-FGM (WP); carbamide peroxide 10% with aristoflex (CPa); carbamide peroxide 10% with Carbopol (CPc); aristoflex thickener (A); and Carbopol thickener (C). According to the following requirements and time, the accelerated stability test was performed: in an incubator at 40 °C and 75% humidity per 1, 3, and 6 months, and baseline (refrigerator at 5 °C and 25% humidity). The variables were analyzed following the statistical tests: Two-way ANOVA and Tukey's test were applied to pH; weight data were analyzed using a mixed model for repeated measurements over time and the Tukey-Kramer test; one-way ANOVA and Tukey's test analyzed the rheology test; generalized linear models were used to quantify the peroxide amount and texture profile data. A significance level of 5% was considered. RESULTS: The experimental bleaches CPa and CPc had the highest pH values when compared to the others in 6 months. Thickeners A and C did not change the pH, weight, and active content over the accelerated stability times (p > 0.05). Furthermore, there was weight loss after 3 months of storage for CPa and CPc (p < 0.05). In the quantification of hydrogen peroxide, the WP group showed the highest values over time (p < 0.0001), only showing a significant loss after the 3rd month. Meanwhile, CPa and CPc showed a reduction in quantification from the 1st month. CONCLUSIONS: Temperature and humidity directly influenced the active content and properties of bleaching gels. In addition, the presence of components regardless of thickeners, such as stabilizers, in the commercial gel allowed for greater stability over time. CLINICAL RELEVANCE: The development of experimental bleaching gels for clinical use requires careful testing. Therefore, accelerated stability testing represents a valuable tool in the development and evaluation of cosmetic formulations.

Altered physical-chemical properties of home bleaching gels after an accelerated stability study and their effects on tooth enamel.

OBJECTIVES: To investigate the physical-chemical properties of home bleaching gels based on Carbamide Peroxide (CP) and Hydrogen Peroxide (HP) after accelerated stability (AS) and its effects on enamel. MATERIALS AND METHODS: A total of 360 bovine teeth blocks were divided (n = 12): Control, CP10%-Whiteness Perfect, CP10%-Pola Night, HP7.5%-Pola Day, and HP7.5%-White Class Calcium. Microhardness (KHN), roughness (Ra), color (ΔE and ΔE00), hardness, compressibility, elasticity, cohesiveness, adhesiveness, weight, pH, and calcium (Ca) quantification in enamel were analyzed without storage of the bleaching gels and after AS at 1 and 3 months. Data of Ca, KHN, and Ra were analyzed through mixed models for repeated measurements and the Tukey-Kramer test. Values of weight, hardness, compressibility, and elasticity were analyzed with two-way ANOVA and Tukey's test. ΔE/ΔE00 data, cohesiveness, and adhesiveness were analyzed with Kruskal-Wallis and Dunn tests (α = 0.05). RESULTS: Groups subject to AS had lower ΔE and ΔE00 compared to those without storage. Lower KHN and higher Ra values were found after bleaching treatment in all groups compared to controls. Higher amounts of Ca were found on the first day of evaluation in the gels subject to AS for 3 months, regardless of the bleaching agent used. CONCLUSIONS: Incorrectly stored bleaching gel accentuates adverse effects on enamel. Temperature and humidity interfere directly with the chemical stability of bleaching agents, reducing their properties. CLINICAL RELEVANCE: HP is an unstable oxidizing agent when stored at high temperatures. Therefore, pH becomes more acidic and potentiates the demineralizing effect on enamel.

Effect of ammonium acryloyldimethyltaurate copolymer on the physical and chemical properties of bleached dental enamel.

OBJECTIVE: To analyze the effect of bioadhesive polymer, Aristoflex® AVC, on enamel physical and chemical properties. MATERIALS AND METHODS: Bovine enamel blocks were divided into CP 10% with carbopol-Whiteness Perfect® (WP-FGM), CP 10% with Aristoflex (A + CP 10%), CP 10% with carbopol (C + CP 10%), Aristoflex (A), carbopol (C), carbamide peroxide 10% (CP 10%) and control (no treatment). The treatment was performed for 4 h during 14 days. The colour (ΔE, ΔL*, Δa* and Δb*), profilometry (Ra) and surface microhardness (KHN) were performed before and after the bleaching treatment. The concentrations of Ca and P were performed on the 1st, 3rd, 7th and 14th days by inductively coupled plasma optical emission spectrometry for the groups WP, A + CP 10%, C + CP 10%, A, C and CP 10% (control without thickener) and the morphology by scanning electron microscopy. RESULTS: All groups with CP 10%, regardless of polymer, differing statistically to ΔE, ΔL*, Δa* and Δb* compared to control group. The group A + CP 10% maintained low values of roughness and microhardness after bleaching. Higher concentration of Ca and P was found in the 1st day of treatment for the WP group compared to the groups A + CP 10% and C + CP 10%. CONCLUSION: The 10% CP associated with the bioadhesive polymer Aristoflex® AVC was effective on the bleaching treatment without changing the physical properties of the dental enamel. Also, this experimental gel caused less mineral loss than the group CP 10% with carbopol (WP-FGM). CLINICAL RELEVANCE: Because the change of Carbopol by Aristoflex, a bioadhesive polymer, does not interfere with the effectiveness of bleaching treatment, it is a promising agent associated to carbamide to maintain the physical properties of enamel after bleaching.

Effect of sodium metabisulfite gel on the bond strength of dentin of bleached teeth.

OBJECTIVE: This study aimed to evaluate the effect of the application of sodium metabisulfite (SMB) on the bond strength of bleached teeth. MATERIALS AND METHODS: The study was divided into two parts. The first part evaluated the application of various concentrations of SMB for 1 h prior to the completion of bonding procedures. Fifty blocks were divided into five groups (n = 10): control; bleaching with 35% hydrogen peroxide (HP); HP + 5% SMB; HP + 12.5% SMB; and HP + 25% SMB. The second part evaluated the application of 25% gel SMB to either enamel or dentin, including the application time. Sixty blocks were divided into six groups (n = 10): control; bleaching with 35% HP; HP + 25% SMB for 1 h in enamel; HP + 25% SMB for 1 h in dentin; HP + 25% SMB for 10 min in enamel; and HP + 25% SMB for 10 min in dentin. STATISTICAL ANALYSIS: Following the completion of microshear bond testing, data were analyzed using one-way analysis of variance as well as Tukey's and Dunnett's tests. RESULTS: In part 1, data analysis revealed statistical differences (P < 0.0001) between HP and HP + 5% SMB. No statistical differences were found between the control and both HP + 12.5% SMB and HP + 25% SMB. Part 2 revealed a statistical difference (P = 0.001359) only between the bleached group and others. CONCLUSIONS: The use of 25% SMB gel immediately after bleaching was able to reverse the deleterious effect of bleaching on the bond strength of dental composites to dentin.

Esthetic smile rehabilitation of anterior teeth by treatment with biomimetic restorative materials: a case report.

BACKGROUND: In daily clinical practice, esthetics of anterior teeth is a common presenting complaint of patients. OBJECTIVE: This case report discusses the management of asymmetric smile associated with unsatisfactory extensive composite restorations and describes a clinical protocol using the direct composite resin for smile enhancement to restore the dental harmony of anterior teeth. METHODS: The treatment planning was based on a diagnostic wax-up and cosmetic mock-up. After clinical and patient approvals were obtained, the patient was subjected to direct and indirect restorative treatment. CONCLUSION: Nanocomposites are an effective alternative for anterior teeth restorations. Additionally, good planning enables satisfactory esthetic results, leading to the correction of an inappropriate axial inclination of incisors.