Poly(γ-glutamic acid) and poly(γ-glutamic acid)-based nanocomplexes enhance type II collagen production in intervertebral disc.

Intervertebral disc (IVD) degeneration often leads to low back pain, which is one of the major causes of disability worldwide, affecting more than 80% of the population. Although available treatments for degenerated IVD decrease symptoms' progression, they fail to address the underlying causes and to restore native IVD properties. Poly(γ-glutamic acid) (γ-PGA) has recently been shown to support the production of chondrogenic matrix by mesenchymal stem/stromal cells. γ-PGA/chitosan (Ch) nanocomplexes (NCs) have been proposed for several biomedical applications, showing advantages compared with either polymer alone. Hence, this study explores the potential of γ-PGA and γ-PGA/Ch NCs for IVD regeneration. Nucleotomised bovine IVDs were cultured ex vivo upon injection of γ-PGA (pH 7.4) and γ-PGA/Ch NCs (pH 5.0 and pH 7.4). Tissue metabolic activity and nucleus pulposus DNA content were significantly reduced when NCs were injected in acidic-buffered solution (pH 5.0). However, at pH 7.4, both γ-PGA and NCs promoted sulphated glycosaminoglycan production and significant type II collagen synthesis, as determined at the protein level. This study is a first proof of concept that γ-PGA and γ-PGA/Ch NCs promote recovery of IVD native matrix, opening new perspectives on the development of alternative therapeutic approaches for IVD degeneration.

Development of an ex vivo cavity model to study repair strategies in loaded intervertebral discs.

PURPOSE: The aim of this study was to compare two approaches for the delivery of biomaterials to partially nucleotomised intervertebral discs in whole organ culture under loading. Such models can help to bridge the gap between in vitro and in vivo studies by assessing (1) suitability of biomaterial delivery and defect closure methods, (2) effect of mechanical loading and (3) tissue response. METHODS: Mechanical performance of bovine discs filled with a hyaluronan-based thermoreversible hydrogel delivered through the annulus fibrosus (AF) or the bony endplate (EP) was evaluated under cyclic axial loading in a bioreactor. The loading protocol was optimised to achieve physiological disc height changes in nucleotomised discs. A loading regime of 0.06 ± 0.02 MPa, 0.1 Hz, 6 h daily was applied on the nucleotomised discs. Disc height and stiffness were tracked for 5 days, followed by histological analyses. RESULTS: Creation of a defect is less demanding for AF approach, while sealing is superior with the EP approach. Dynamic compressive stiffness is reduced following nucleotomy, with no significant difference between the two approaches. Disc height loss was higher, disc height recovery was lower and region around the defect with reduced cell viability was smaller for AF-approached than EP-approached discs. CONCLUSIONS: Two alternative methods for biomaterial testing in whole organ culture under loading were developed. Such models bring insights on the ability of the biomaterial to restore the mechanical behaviour of the discs. From a clinical perspective, the cavity models can simulate treatment of nucleotomy after disc herniation in young patients, whereby the remaining nucleus pulposus is still functional and therefore at high risk of re-herniation, though the defect may differ from the clinical situation.

Influence of extremely low frequency, low energy electromagnetic fields and combined mechanical stimulation on chondrocytes in 3-D constructs for cartilage tissue engineering.

Articular cartilage, once damaged, has very low regenerative potential. Various experimental approaches have been conducted to enhance chondrogenesis and cartilage maturation. Among those, non-invasive electromagnetic fields have shown their beneficial influence for cartilage regeneration and are widely used for the treatment of non-unions, fractures, avascular necrosis and osteoarthritis. One very well accepted way to promote cartilage maturation is physical stimulation through bioreactors. The aim of this study was the investigation of combined mechanical and electromagnetic stress affecting cartilage cells in vitro. Primary articular chondrocytes from bovine fetlock joints were seeded into three-dimensional (3-D) polyurethane scaffolds and distributed into seven stimulated experimental groups. They either underwent mechanical or electromagnetic stimulation (sinusoidal electromagnetic field of 1 mT, 2 mT, or 3 mT; 60 Hz) or both within a joint-specific bioreactor and a coil system. The scaffold-cell constructs were analyzed for glycosaminoglycan (GAG) and DNA content, histology, and gene expression of collagen-1, collagen-2, aggrecan, cartilage oligomeric matrix protein (COMP), Sox9, proteoglycan-4 (PRG-4), and matrix metalloproteinases (MMP-3 and -13). There were statistically significant differences in GAG/DNA content between the stimulated versus the control group with highest levels in the combined stimulation group. Gene expression was significantly higher for combined stimulation groups versus static control for collagen 2/collagen 1 ratio and lower for MMP-13. Amongst other genes, a more chondrogenic phenotype was noticed in expression patterns for the stimulated groups. To conclude, there is an effect of electromagnetic and mechanical stimulation on chondrocytes seeded in a 3-D scaffold, resulting in improved extracellular matrix production.

Cartilage tissue engineering using decellularized biomatrix hydrogel containing TGF-ß-loaded alginate microspheres in mechanically loaded bioreactor.

Physiochemical tissue inducers and mechanical stimulation are both efficient variables in cartilage tissue fabrication and regeneration. In the presence of biomolecules, decellularized extracellular matrix (ECM) may trigger and enhance stem cell proliferation and differentiation. Here, we investigated the controlled release of transforming growth factor beta (TGF-ß1) as an active mediator of mesenchymal stromal cells (MSCs) in a biocompatible scaffold and mechanical stimulation for cartilage tissue engineering. ECM-derived hydrogel with TGF-ß1-loaded alginate-based microspheres (MSs) was created to promote human MSC chondrogenic development. Ex vivo explants and a complicated multiaxial loading bioreactor replicated the physiological conditions. Hydrogels with/without MSs and TGF-ß1 were highly cytocompatible. MSCs in ECM-derived hydrogel containing TGF-ß1/MSs showed comparable chondrogenic gene expression levels as those hydrogels with TGF-ß1 added in culture media or those without TGF-ß1. However, constructs with TGF-ß1 directly added within the hydrogel had inferior properties under unloaded conditions. The ECM-derived hydrogel group including TGF-ß1/MSs under loading circumstances formed better cartilage matrix in an ex vivo osteochondral defect than control settings. This study demonstrates that controlled local delivery of TGF-ß1 using MSs and mechanical loading is essential for neocartilage formation by MSCs and that further optimization is needed to prevent MSC differentiation towards hypertrophy.

Hyaluronic acid-based interpenetrating network hydrogel as a cell carrier for nucleus pulposus repair.

Hyaluronic acid (HA) is a key component of the intervertebral disc (IVD) that is widely investigated as an IVD biomaterial. One persisting challenge is introducing materials capable of supporting cell encapsulation and function, yet with sufficient mechanical stability. In this study, a hybrid interpenetrating polymer network (IPN) was produced as a non-covalent hydrogel, based on a covalently cross-linked HA (HA-BDDE) and HA-poly(N-isopropylacrylamide) (HA-pNIPAM). The hybrid IPN was investigated for its physicochemical properties, with histology and gene expression analysis to determine matrix deposition in vitro and in an ex vivo model. The IPN hydrogel displayed cohesiveness for at least one week and rheological properties resembling native nucleus pulposus (NP) tissue. When implanted in an ex vivo IVD organ culture model, the IPN supported cell viability, phenotype expression of encapsulated NP cells and IVD matrix production over four weeks under physiological loading. Overall, our results indicate the therapeutic potential of this HA-based IPN hydrogel for IVD regeneration.

Effect of the CCL5-Releasing Fibrin Gel for Intervertebral Disc Regeneration.

OBJECTIVE: To explore if chemokine (C-C motif) ligand 5 (CCL5) delivery could recruit annulus fibrosus (AF) cells to the injury sites and facilitate the repair of ruptured AF. DESIGN: The effects of CCL5 on bovine AF cells in vitro were tested by transwell assay and quantitative real-time polymerase chain reaction. Fibrin gel containing CCL5 was used to treat annulotomized bovine caudal discs cultured under dynamic loading conditions. After 14 days of loading, the samples were collected for histological examination. A pilot animal study was performed using sheep cervical discs to investigate the effect of fibrin gel encapsulated with CCL5 for the treatment of ruptured AF. After 14 weeks, the animals were sacrificed, and the discs were scanned with magnetic resonance imaging before histopathological examination. RESULTS: CCL5 showed a chemotactic effect on AF cells in a dose-dependent manner. AF cells cultured with CCL5 in vitro did not show any change of the gene expression of CCL5 receptors, catabolic and proinflammatory markers. In vitro release study showed that CCL5 exhibited sustained release from the fibrin gel into the culture media; however, in the organ culture study CCL5 did not stimulate homing of AF cells toward the defect sites. The pilot animal study did not show any repair effect of CCL5. CONCLUSIONS: CCL5 has a chemotactic effect on AF cells in vitro, but no ex vivo or in vivo regenerative effect when delivered within fibrin gel. Further study with a stronger chemotactic agent and/or an alternate biomaterial that is more conductive of cell migration is warranted.

Effects of simple and complex motion patterns on gene expression of chondrocytes seeded in 3D scaffolds.

This study investigated the effect of unidirectional and multidirectional motion patterns on gene expression and molecule release of chondrocyte-seeded 3D scaffolds. Resorbable porous polyurethane scaffolds were seeded with bovine articular chondrocytes and exposed to dynamic compression, applied with a ceramic hip ball, alone (group 1), with superimposed rotation of the scaffold around its cylindrical axis (group 2), oscillation of the ball over the scaffold surface (group 3), or oscillation of ball and scaffold in phase difference (group 4). Compared with group 1, the proteoglycan 4 (PRG4) and cartilage oligomeric matrix protein (COMP) mRNA expression levels were markedly increased by ball oscillation (groups 3 and 4). Furthermore, the collagen type II mRNA expression was enhanced in the groups 3 and 4, while the aggrecan and tissue inhibitor of metalloproteinase-3 (TIMP-3) mRNA expression levels were upregulated by multidirectional articular motion (group 4). Ball oscillation (groups 3 and 4) also increased the release of PRG4, COMP, and hyaluronan (HA) into the culture media. This indicates that the applied stimuli can contribute to the maintenance of the chondrocytic phenotype of the cells. The mechanical effects causing cell stimulation by applied surface motion might be related to fluid film buildup and/or frictional shear at the scaffold-ball interface. It is suggested that the oscillating ball drags the fluid into the joint space, thereby causing biophysical effects similar to those of fluid flow.

Polyurethane scaffold with in situ swelling capacity for nucleus pulposus replacement.

Nucleus pulposus (NP) replacement offers a minimally invasive alternative to spinal fusion or total disc replacement for the treatment of intervertebral disc (IVD) degeneration. This study aimed to develop a cytocompatible NP replacement material, which is feasible for non-invasive delivery and tunable design, and allows immediate mechanical restoration of the IVD. A bi-phasic polyurethane scaffold was fabricated consisting of a core material with rapid swelling property and a flexible electrospun envelope. The scaffold was assessed in a bovine whole IVD organ culture model under dynamic load for 14 days. Nucleotomy was achieved by incision through the endplate without damaging the annulus fibrosus. After implantation of the scaffold and in situ swelling, the dynamic compressive stiffness and disc height were restored immediately. The scaffold also showed favorable cytocompatibility for native disc cells. Implantation of the scaffold in a partially nucleotomized IVD down-regulated catabolic gene expression, increased proteoglycan and type II collagen intensity and decreased type I collagen intensity in remaining NP tissue, indicating potential to retard degeneration and preserve the IVD cell phenotype. The scaffold can be delivered in a minimally invasive manner, and the geometry of the scaffold post-hydration is tunable by adjusting the core material, which allows individualized design.

Fibrin-polyurethane composites for articular cartilage tissue engineering: a preliminary analysis.

In this study we investigated the use of a fibrin hydrogel to improve the potential of a polyurethane (PU) scaffold-based system for articular cartilage tissue engineering. PU-only ("no-fibrin") and PU-fibrin ("fibrin") composites were cultured for up to 28 days and analyzed for DNA content, glycosaminoglycan (GAG) content, type II collagen content, GAG release, and gene expression of aggrecan, collagen I, and collagen II. The use of fibrin allowed for higher viable cell-seeding efficiency (10% higher DNA content on day 2 in fibrin versus no-fibrin composites) and more even cell distribution on seeding, a more than 3-fold increase in the percentage of newly synthesized GAG retained in the constructs, and 2- to 6-fold higher levels of type II collagen and aggrecan gene expression through day 14. Addition of aprotinin to the medium inhibited fibrin degradation, most noticeably in the center of the constructs, but had little effect on biochemical composition or gene expression. Short-term mechanical compression (0-10% sinusoidal strain at 0.1 Hz for 1 h, applied twice daily for 3 days) doubled the rate of GAG release from the constructs, but had little effect on gene expression, regardless of the presence of fibrin. Although further work is needed to optimize this system, the addition of fibrin hydrogel to encapsulate cells in the stiff, macroporous PU scaffold is a step forward in our approach to articular cartilage tissue engineering.

Surface motion upregulates superficial zone protein and hyaluronan production in chondrocyte-seeded three-dimensional scaffolds.

A cartilage engineering bioreactor has been developed that provides joint-specific kinematics. This study investigated the effect of articular motion on the gene expression of superficial zone protein (SZP) and hyaluronan synthases (HASs) and on the release of SZP and hyaluronan of chondrocytes seeded onto biodegradable scaffolds. Cylindrical (8 x 4 mm) porous polyurethane scaffolds were seeded with bovine articular chondrocytes and subjected to static or dynamic compression, with and without articulation against a ceramic hip ball. After loading, the mRNA expression of SZP and HASs was analyzed, and SZP immunoreactivity and hyaluronan concentration of conditioned media were determined. Surface motion significantly upregulated the mRNA expression of SZP and HASs. Axial compression alone had no effect on SZP and increased HAS mRNA only at high strain amplitude. SZP was immunodetected only in the media of constructs exposed to surface motion. The release of hyaluronan into the culture medium was significantly enhanced by surface motion. These results indicate that specific stimuli that mimic the kinematics of natural joints, such as articular motion, may promote the development of a functional articular surface-synovial interface.

A combined biomaterial and cellular approach for annulus fibrosus rupture repair.

Recurrent intervertebral disc (IVD) herniation and degenerative disc disease have been identified as the most important factors contributing to persistent pain and disability after surgical discectomy. An annulus fibrosus (AF) closure device that provides immediate closure of the AF rupture, restores disc height, reduces further disc degeneration and enhances self-repair capacities is an unmet clinical need. In this study, a poly(trimethylene carbonate) (PTMC) scaffold seeded with human bone marrow derived mesenchymal stromal cells (MSCs) and covered with a poly(ester-urethane) (PU) membrane was assessed for AF rupture repair in a bovine organ culture annulotomy model under dynamic load for 14 days. PTMC scaffolds combined with the sutured PU membrane restored disc height of annulotomized discs and prevented herniation of nucleus pulposus (NP) tissue. Implanted MSCs showed an up-regulated gene expression of type V collagen, a potential AF marker, indicating in situ differentiation capability. Furthermore, MSCs delivered within PTMC scaffolds induced an up-regulation of anabolic gene expression and down-regulation of catabolic gene expression in adjacent native disc tissue. In conclusion, the combined biomaterial and cellular approach has the potential to hinder herniation of NP tissue, stabilize disc height, and positively modulate cell phenotype of native disc tissue.

Organ culture bioreactors--platforms to study human intervertebral disc degeneration and regenerative therapy.

In recent decades the application of bioreactors has revolutionized the concept of culturing tissues and organs that require mechanical loading. In intervertebral disc (IVD) research, collaborative efforts of biomedical engineering, biology and mechatronics have led to the innovation of new loading devices that can maintain viable IVD organ explants from large animals and human cadavers in precisely defined nutritional and mechanical environments over extended culture periods. Particularly in spine and IVD research, these organ culture models offer appealing alternatives, as large bipedal animal models with naturally occurring IVD degeneration and a genetic background similar to the human condition do not exist. Latest research has demonstrated important concepts including the potential of homing of mesenchymal stem cells to nutritionally or mechanically stressed IVDs, and the regenerative potential of "smart" biomaterials for nucleus pulposus or annulus fibrosus repair. In this review, we summarize the current knowledge about cell therapy, injection of cytokines and short peptides to rescue the degenerating IVD. We further stress that most bioreactor systems simplify the real in vivo conditions providing a useful proof of concept. Limitations are that certain aspects of the immune host response and pain assessments cannot be addressed with ex vivo systems. Coccygeal animal disc models are commonly used because of their availability and similarity to human IVDs. Although in vitro loading environments are not identical to the human in vivo situation, 3D ex vivo organ culture models of large animal coccygeal and human lumbar IVDs should be seen as valid alternatives for screening and feasibility testing to augment existing small animal, large animal, and human clinical trial experiments.

The use of biodegradable polyurethane scaffolds for cartilage tissue engineering: potential and limitations.

The aim of the present study was to evaluate the capability of novel biodegradable polyurethane scaffolds to support attachment, growth and maintenance of differentiated chondrocytes in vitro for up to 42 days. After an initial decrease, although not significant, the DNA content of the constructs remained constant over the culture time. A progressive increase in glycosaminoglycans and collagen was observed during the culture period. However, a significant release of matrix molecules into the culture medium was also noticeable. At the transcriptional level, a decrease in aggrecan and procollagen II mRNA expression was noticeable, whereas procollagen I expression was increased. To conclude, the present data demonstrate that biodegradable polyurethane porous scaffolds seeded with articular chondrocytes support cell attachment and the production of extracellular matrix proteins. The limitations of the system are the diffusion of large amounts of matrix molecules into the culture medium and the dedifferentiation of the chondrocytes with prolonged time in culture. However, due to the favourable mechanical properties of the polyurethane scaffold, stimulation of chondrocytes by mechanical loading can be considered in order to improve the formation of a functional cartilage-like extracellular matrix.

Chondrocytes seeded onto poly (L/DL-lactide) 80%/20% porous scaffolds: a biochemical evaluation.

Repair of articular cartilage remains a clinical and scientific challenge. The use of implantable chondrocyte-seeded constructs offers a promising treatment option. The present study is focused on the culture of chondrocytes onto 3-D poly (L-/DL-lactide) 80%/20% porous scaffolds. Scaffolds were seeded with bovine articular chondrocytes and cultured for up to 42 days. After an initial decrease, although not significant, the DNA content of the constructs remained constant over the culture time. A progressive increase in glycosaminoglycans and collagen was observed in the constructs during the culture period. However, a significant release of matrix molecules into the culture medium also was noticeable. On the transcriptional level, aggrecan mRNA expression was highest on day 14 and gradually decreased thereafter. Procollagen I mRNA expression constantly increased whereas procollagen II mRNA expression decreased after day 14, indicating that cells were dedifferentiating. Histologic analysis of the constructs demonstrated the deposition of a proteoglycan-rich extracellular matrix by day 42 of culture. The present data demonstrate that poly (L-/DL-lactide) 80%/20% porous scaffolds support the development of a cartilage-like extracellular matrix. The limitations of the system are the diffusion of large amounts of matrix molecules into the culture medium and the dedifferentiation of the chondrocytes with prolonged time in culture.

Biodegradable electrospun scaffolds for annulus fibrosus tissue engineering: effect of scaffold structure and composition on annulus fibrosus cells in vitro.

Electrospinning technology is an attractive process for the fabrication of a scaffold with an annulus fibrosus (AF)-like architecture for tissue engineering. Oriented and nonoriented electrospun scaffolds were prepared from poly(ester-urethane) (PU) and poly(ɛ-caprolactone) (PCL) as well as corresponding homogeneous films. Scaffolds' characteristics and mechanical properties were characterized by scanning electron microscopy, static water contact measurements, and dynamic mechanical analysis, respectively. The effect of scaffold architecture and polymer composition on bovine AF cells was investigated. PU and PCL films and scaffolds supported AF cell growth and extracellular matrix production and accumulation. Electrospun scaffolds increased the retention of collagen and glycosaminoglycan compared with films. Fiber orientation of the scaffolds promoted the AF cell phenotype with a trend toward an upregulation of matrix gene expression for oriented relative to nonoriented scaffolds. The higher yield strain of an oriented electrospun PU scaffold, compared with other scaffolds, will be advantageous for AF tissue engineering under a dynamic mechanical environment.

An injectable vehicle for nucleus pulposus cell-based therapy.

An injectable hydrogel, acting as a reservoir for cell delivery and mimicking the native environment, offers promise for nucleus pulposus (NP) repair and regeneration. Herein, the potential of a stabilised type II collagen hydrogel using poly(ethylene glycol) ether tetrasuccinimidyl glutarate (4S-StarPEG) cross-linker, enriched with hyaluronic acid (HA) was investigated. The optimally stabilised type II collagen hydrogel was determined by assessing free amine groups, resistance to enzymatic degradation, gel point. The potential toxicity of the cross-linker was initially assessed against adipose-derived stem cells (ADSCs). After addition of HA (molar ratio type II collagen:HA 9:0, 9:1, 9:4.5, 9:9) within the hydrogel, the behaviour of the encapsulated NP cells was evaluated using cell proliferation assay, gene expression analysis, cell distribution and cell morphology. A significant decrease (p < 0.05) in the free amine groups of collagen was observed, confirming successful cross-linking. Gelation was independent of the concentration of 4S-StarPEG (8 min at 37 °C). The 1 mm cross-linked hydrogel yielded the most stable after enzymatic degradation (p < 0.05). No toxicity of the 4S-StarPEG was noted for the ADSCs. NP cell viability was high regardless of the concentration of HA (>80%). A cell proliferation was not seen after 14 days in its presence. At a gene expression level, HA did not influence NP cells phenotype after seven days in culture. After seven days in culture, the type I collagen mRNA expression was maintained (p > 0.05). The optimally stabilised and functionalised type II collagen/HA hydrogel system developed in this study shows promise as an injectable reservoir system for intervertebral disc regeneration.

Farnesol-modified biodegradable polyurethanes for cartilage tissue engineering.

A bifunctionalized 3,7,11-trimethyl-2,6,10-dodecatrien-1-diaminobutane amide (isoprenoid) was obtained from 3,7,11-trimethyl-2,6,10-dodecatrien-1-ol (farnesol) in a three-step synthesis. The bifunctionalized isoprenoid was characterized using infrared spectroscopy and (1)H and (13)C nuclear magnetic resonance spectroscopy and was covalently incorporated (0.12 mmol x g(-1)) into the biodegradable aliphatic polyurethane formed on the polycondensation reaction of poly(epsilon-caprolactone) diol, 1,4,3,6-dianhydro-D-sorbitol and 1,6-hexamethylene diisocyanate. Although the covalent incorporation of the isoprenoid molecule into the polyurethane chain modified the surface chemistry of the polymer, it did not affect the viability of attached chondrocytes. Porous 3D scaffolds were produced from the modified and unmodified biodegradable segmented polyurethanes by a salt leaching-phase-inverse technique. The scaffolds were seeded with bovine chondrocytes encapsulated in fibrin gel and cultured in vitro for 14 days. The incorporation of bifunctional isoprenoid into the polyurethane affected the morphology of the scaffolds produced, when compared with the morphology of the scaffolds produced using the same technique from the unmodified polyurethane. As a consequence, there was more uniform cell seeding and more homogeneous distribution of the synthesized extracellular matrix throughout the scaffold resulting in a reduced cell/tissue layer at the edges of the constructs. However, glycosaminoglycan (GAG), DNA content, and chondrocytes phenotype in the scaffolds produced from these two polyurethane formulations did not vary significantly. The findings suggest that the change of surface characteristics and the more open pore structure of the scaffolds produced from the isoprenoid-modified polyurethane are beneficial for the seeding efficiency and the homogeneity of the tissue engineered constructs.

Cells and biomaterials in cartilage tissue engineering.

Cartilage defects are notoriously difficult to repair and owing to the long-term prognosis of osteoarthritis, and a rapidly aging population, a need for new therapies is pressing. Cell-based therapies for cartilage regeneration were introduced into patients in the early 1990s. Since that time the technology has developed from a simple cell suspension to more complex 3D structures. Cells, both chondrocytes and stem cells, have been incorporated into scaffold material with the aim to better recreate the natural environment of the cell, while providing more structural support to withstand the large forces applied on the de novo tissue. This review aims to provide an overview of potential cell sources and different scaffold materials, which are in development for cartilage tissue engineering.

Physicobiochemical synergism through gene therapy and functional tissue engineering for in vitro chondrogenesis.

Mechanical and chemical stimulation have been shown to enhance in vitro chondrogenesis. The aim of this study was to analyze and compare combined physicobiochemical effects. Bovine articular chondrocytes were retrovirally transduced to express bone morphogenetic protein-2 (BMP-2) or left as naïve controls. Cells were seeded in three-dimensional polyurethane scaffolds and further cultured under static conditions or exposed to dynamic compression and shear in a joint-specific bioreactor. Four groups: control (A), load (B), BMP-2-infected (C), and BMP-2-infected plus load (D) were analyzed for DNA and glycosaminoglycan (GAG) content; collagen I, II, and X; aggrecan, (cartilage oligomeric protein (COMP), superficial zone protein, matrix metalloproteinase (MMP)-3; MMP-13 mRNA; histology; and immunohistochemistry at 7, 21, and 35 days post-seeding. Synergistic effects (D) were higher than the sum of the individual treatments (B and C) for GAG/DNA, collagen II, and COMP. Histology revealed a functional organization in D including an intense safranin O staining in C and D superior to that in A and B. Immunostaining for collagen II and aggrecan was detected in C and D and was strongest in D. The results show that both stimuli augment in vitro chondrogenesis better than in controls. Biochemical manipulation proved to be predominantly more effective than load, and synergistic effects were demonstrated.

Effect of reduced oxygen tension and long-term mechanical stimulation on chondrocyte-polymer constructs.

We have investigated the influence of long-term confined dynamic compression and surface motion under low oxygen tension on tissue-engineered cell-scaffold constructs. Porous polyurethane scaffolds (8 mm x 4 mm) were seeded with bovine articular chondrocytes and cultured under normoxic (21% O(2)) or hypoxic (5% O(2)) conditions for up to 4 weeks. By means of our joint-simulating bioreactor, cyclic axial compression (10-20%; 0.5 Hz) was applied for 1 h daily with a ceramic ball, which simultaneously oscillated over the construct surface (+/-25 degrees; 0.5 Hz). Culture under reduced oxygen tension resulted in an increase in mRNA levels of type II collagen and aggrecan, whereas the expression of type I collagen was down-regulated at early time points. A higher glycosaminoglycan content was found in hypoxic than in normoxic constructs. Immunohistochemical analysis showed more intense type II and weaker type I collagen staining in hypoxic than in normoxic cultures. Type II collagen gene expression was slightly elevated after short-term loading, whereas aggrecan mRNA levels were not influenced by the applied mechanical stimuli. Of importance, the combination of loading and low oxygen tension resulted in a further down-regulation of collagen type I mRNA expression, contributing to the stabilization of the chondrocytic phenotype. Histological results confirmed the beneficial effect of mechanical loading on chondrocyte matrix synthesis. Thus, mechanical stimulation combined with low oxygen tension is an effective tool for modulating the chondrocytic phenotype and should be considered when chondrocytes or mesenchymal stem cells are cultured and differentiated with the aim of generating cartilage-like tissue in vitro.