Enhancing osteoconduction of PLLA-based nanocomposite scaffolds for bone regeneration using different biomimetic signals to MSCs.

In bone engineering, the adhesion, proliferation and differentiation of mesenchymal stromal cells rely on signaling from chemico-physical structure of the substrate, therefore prompting the design of mimetic "extracellular matrix"-like scaffolds. In this study, three-dimensional porous poly-L-lactic acid (PLLA)-based scaffolds have been mixed with different components, including single walled carbon nanotubes (CNT), micro-hydroxyapatite particles (HA), and BMP2, and treated with plasma (PT), to obtain four different nanocomposites: PLLA + CNT, PLLA + CNTHA, PLLA + CNT + HA + BMP2 and PLLA + CNT + HA + PT. Adult bone marrow mesenchymal stromal cells (MSCs) were derived from the femur of orthopaedic patients, seeded on the scaffolds and cultured under osteogenic induction up to differentiation and mineralization. The release of specific metabolites and temporal gene expression profiles of marrow-derived osteoprogenitors were analyzed at definite time points, relevant to in vitro culture as well as in vivo differentiation. As a result, the role of the different biomimetic components added to the PLLA matrix was deciphered, with BMP2-added scaffolds showing the highest biomimetic activity on cells differentiating to mature osteoblasts. The modification of a polymeric scaffold with reinforcing components which also work as biomimetic cues for cells can effectively direct osteoprogenitor cells differentiation, so as to shorten the time required for mineralization.

Sensitivity to implant materials in patients with total knee arthroplasties.

Materials used for total knee arthroplasty (TKA), may elicit an immune response whose role in the outcome of the arthroplasty is still unclear. The aim of this study was to evaluate the frequency of sensitization in patients who had undergone TKA, and the clinical impact of this event on the outcome of the implant. Ninety-four subjects were recruited, including 20 patients who had not yet undergone arthroplasty, 27 individuals who had a well-functioning TKA, and 47 patients with loosening of TKA components. Sensitization was detected by using patch testing including haptens representative of cobalt-based alloys (CoCrMo), titanium-based alloys (TiAlV), and bone cements. The frequency of positive skin reactions to metals increased significantly after TKA, either stable or loosened (No Implant 20%; Stable TKA 48.1%, p=0.05; Loosened TKA 59.6%, p=0.001, respectively). We found a higher frequency of positive patch testing to vanadium in patients who had a Stable TKA with at least one TiAlV component (39.1%, p=0.01). The medical history for metal allergy seems to be a risk factor, because the TKA failure was fourfold more likely in patients who had symptoms of metal hypersensitivity before TKA. The prognostic value was supported by survival analysis, because in these individuals the outcome of the implant was negatively influenced (the logrank test Chi square 5.1, p=0.02). This study confirms that in patients with a TKA the frequency of positive patch testing is higher than in the normal population, although no predictive value is attributable to the sensitization because patch testing was not able to discriminate between stable and loose implants. On the contrary, the presence of symptoms of metal allergy before implantation should be taken into account as a potential risk factor for TKA failure.

Biocompatibility of poly(D,L-lactide-co-glycolide) nanoparticles conjugated with alendronate.

Nanoparticles made of a conjugate of poly(D,L-lactide-co-glycolide) with alendronate (PLGA-ALE NPs), were prepared by emulsion/solvent evaporation technique. The conjugation yield, determined by MALDI TOF analysis, was 30-35%. PLGA-ALE NPs size, evaluated by photon correlation spectroscopy, was 198.7+/-0.2 nm. Haemocompatibility studies using different concentrations of PLGA-ALE NPs did not show any significant effect on haemolysis, leukocyte number, platelet activation, APTT and complement consumption, in comparison with blood incubated with phosphate buffered saline (PBS). A significant reduction of the prothrombin activity was demonstrated after incubation with 560 microg/ml of PLGA-ALE NPs; a significant increase was observed at the highest dilutions. The viability of human umbilical vein endothelial cells and bone marrow stromal cells (BMSC), evaluated through the neutral red test, was not affected by PLGA-ALE NPs. There were no significant differences in cell-associated alkaline phosphatase between BMSC incubated with PLGA-ALE NP- and PBS-added media. These results demonstrated that PLGA-ALE NPs had an acceptable degree of blood compatibility and were not cytotoxic; therefore, they may be considered suitable for intravenous administration.

Expression of cell adhesion receptors in human osteoblasts cultured on biofunctionalized poly-(epsilon-caprolactone) surfaces.

This study was aimed to investigate whether the activation of poly-(epsilon-caprolactone) (PCL) surface by low-energy irradiation and/or the biofunctionalization by absorption of arginine-glycine-aspartic sequences (RGD), can modify the expression of integrins closely related to the osteoblast activity. For this purpose, we analysed the physicochemical changes induced by irradiation and RGD immobilization, the consequences on cell adhesion and spreading, and the effects on integrin expression. PCL irradiated with 5 x 10(15)He(+)/cm(2) (10 keV energy) (irr-PCL) showed an altered surface layer with a partial loss of carboxyl species and the formation of carbonyl groups. Moreover, irr-PCL showed a small smoothening effect and a less polar character in comparison to the pristine ones. The RGD immobilization was observed only on irr-PCL (surface coverage: 7.0 pmol/cm(2)). Human osteoblasts (hOB) were cultured on untreated PCL (ut-PCL), ut-PCL+RGD, irr-PCL, and irr-PCL+RGD. After 24h, ut-PCL hindered the cell adhesion, while a discrete layer of hOB with a good cytoskeleton organization was detected on irr-PCL and irr-PCL+RGD. Before seeding, the single hOB suspension expressed alpha1, alpha2, alpha3, alpha5, beta1, and alphaVbeta3; after 24h, cells cultured on tissue-plastic expressed high levels of beta1 and alphaVbeta3, while alpha1 showed a low intensity and alpha2, alpha3, and alpha5 were negative. beta1 and alphaVbeta3 were selected to evaluate the interaction between cells and PCL samples. The beta1 expression was higher in hOB cultured on irr-PCL than on the other samples. A significant increase in alphaVbeta3 expression was observed only in irr-PCL+RGD, and confirmed by the gene expression analysis. In conclusion, ion irradiation and RGD adsorption on PCL surfaces modulate the expression of integrin involved in hOB growth and function, indicating the effectiveness of biomimetic surfaces in promoting cell adhesion. Ultimately, the study of integrin expression may suggest proper changes to the surface structure in order to improve the osteoconductivity of selected materials.

Sensitivity to implant materials in patients undergoing total hip replacement.

Sensitivity to implant materials is an unpredictable event, which may contribute to the process leading to the failure of the total hip replacement (THR). The aim of the current study was to investigate the informative power of skin testing in detecting the sensitization to the implant components in patients undergoing THR. A consecutive series of 223 patients was enrolled in the study, including 66 candidates to THR, 53 with stable implant, and 104 with THR loosening. The patch testing was performed by using the most relevant components of cobalt-based alloys (CoCrMo), Ti-based alloys (TiAlV), and bone cements. The frequency of positive patch testing in preimplant patients did not differ from that observed after THR. Patients with CoCrMo-failed implant showed a significant low frequency of nickel-positive skin reaction, while patients with TiAlV-THR had a high incidence of vanadium-positive patch testing. The panel of haptens showed a good performance in the identification of patients known to have a contact dermatitis. With regard to the THR outcome, patch testing was not able to discriminate between stable and failed implant. Sensitivity to at least one hapten, namely bone cement, as well as the positive medical history of hypersensitivity, influenced negatively the THR survival. Our results show the reliability of patch testing for investigating the sensitivity to implant components. The cause-effect relationship between sensitization and negative outcome cannot be established, but the shorter lifespan of THR in patients who have a positive patch testing supports the significant role of this event in contributing to the implant failure.

Molecular basis of osteoclastogenesis induced by osteoblasts exposed to wear particles.

In this study, we investigate the molecular mechanisms by which human osteoblasts (HOB) challenged with wear debris promote the differentiation of osteoclast precursors. HOB were obtained from trabecular bone and exposed to alumina (Al(2)O(3)) or 'ultra-high molecular weight polyethylene' (UHMWPE) particles for 24h. The supernatant (HOB-CM) was used for the immunoenzymatic detection of receptor activator of NF-kappaB ligand (RANKL) and osteoprotegerin (OPG), as well as for inducing the osteoclast differentiation from peripheral blood mononuclear cells (PBMC). The OPG-to-RANKL ratio was significantly decreased in the conditioned medium of UHMWPE-challenged HOB. Morphological and cytochemical analysis showed that HOB-CM induced by itself the osteoclast formation, but a large amount of multinucleated tartrate-resistant acid phosphatase (TRAP)-positive giant cells were obtained when PBMCs were cultured with 1 microg/mL UHMWPE HOB-CM. The expression of genes involved in osteoclast differentiation and activation was evaluated, i.e. c-fms, RANK, c-src, c-fos, cathepsin-K (CATK), TRAP, and calcitonin R (CTR). The UHMWPE HOB-CM increases c-src expression, suggesting that polyethylene debris favour the paracrine activity of HOB in inducing the pathway involved in osteoclast polarization and adhesion. On the contrary, Al(2)O(3) HOB-CM downregulates c-fos expression, suggesting that the passage from macrophages into the osteoclast lineage is deviated. These results show that Al(2)O(3) wear debris is less active than UHMWPE in inducing osteoclast differentiation. Moreover, they provide new insight into the molecular basis of particle-induced osteoclastogenesis, that is the starting point for planning mode-specific targeting of periprosthetic osteolysis.

Effect of four acrylic bone cements on transforming growth factor-beta1 expression by osteoblast-like cells MG63.

Based on the hypothesis that bone cements cause changes in the production of transforming growth factor-beta 1 (TGF-beta1) by bone cells, the effects of four acrylic bone cements (Sulfix-60, CMW 1, CMW 2 and CMW 3) were examined using the osteoblast-like cell line MG63. The extracts in MEM of the cements were tested, following 1 h- and 7 day-curing. MG63 cells seldom expressed mRNA specific for TGF-beta1 in basal conditions. The cultures expressed mRNA constantly after incubation with the extract of CMW 1 cured for 1 h. TGF-beta1 specific mRNA was seldom expressed after incubation with the other cement extracts. The release of TGF-beta1 into the conditioned medium was increased significantly by CMW 1 extract at 1 h-curing, but was not changed significantly by CMW 1 extract at 7 day-curing and by the extracts of the other cements, at both curing times. The stimulating effect of CMW 1 on the secretion of TGF-beta1, even with all the restrictions of an in vitro study of continuous cell lines, if confirmed in vivo, might favor the development of the synovial-like membrane around the implant, and therefore impair the chance of success of the prosthesis.

Thrombomodulin expression in endothelial cells after contact with bone cement.

The expression of thrombomodulin after contact with CMW 1 bone cement extracts was studied in human umbilical vein endothelial cells. Cement extracts after 1 h and 7-day curing induced no significant variations in thrombomodulin antigen levels and in mRNA expression. Significant increase of thrombomodulin was observed when endothelial cells were treated with all-trans retinoic acid (ATRA). ATRA induced the increase of thrombomodulin also in cells incubated with cement extracts. These results suggest that CMW 1 bone cement does not impair the expression of thrombomodulin in endothelial cells.

Effects of bone cement extracts on the cell-mediated immune response.

The aim of the study was to evaluate some aspects of the immunocompatibility of 10 acrylic bone cements. Mononuclear cells harvested from healthy individuals were cultured with cement extracts which were tested to assess their effect on the viability of lymphocytes, unstimulated and phytohaemoagglutinin (PHA)-stimulated, activating resting lymphocytes, and changing the reactivity of PHA-stimulated lymphocytes. After 24 h the extracts did not increase the percentage of dead cells in unstimulated or PHA-stimulated lymphocytes. The early apoptotic events of culture were evaluated after 4 and 24 h in PHA-stimulated lymphocytes: at 4 h three cements, namely Zimmer-dough type, Palacos R and CMW-1, increased significantly the percentage of apoptotic cells, while at 24 h no differences were found. Cement extracts did not activate the resting lymphocytes, whereas the response of the PHA-stimulated cells was significantly modified. All cements decreased the expression of the interleukin 2 receptor (CD25) and the lymphocyte proliferation, whereas only two materials (Zimmer-dough type, CMW 1) affected the expression of early activation antigen (CD69). These findings show that the products released from bone cement are not able, by themselves, to elicit a specific immune response; on the contrary they hamper the function of lymphocytes activated by an exogenous stimulus.

Bone cement extracts modulate the osteoprotegerin/osteoprotegerin-ligand expression in MG63 osteoblast-like cells.

The osteoprotegerin-ligand (OPG-L) has been identified as the essential factor required for osteoclastogenesis, and its effects are prevented by the osteoprotegerin (OPG). The OPG-L/OPG balance plays a crucial role in coordinating the sequence of osteoclast and osteoblast differentiation during the bone remodeling. The aim of the study was to investigate if polymethylmethacrylate-based cements are able to modulate the expression of OPG-L/OPG in MG63 cells, which are known to have high levels of OPG and inducible expression of OPG-L. Four radio-opaque cements. namely Sulfix-60, CMW1, CMW2 and CMW3, were polymerized for either 1 h or 7 d. MG63 were incubated for 24 h with culture medium only, cement extracts and 2 microg/ml of human recombinant IL-1beta as positive control. An RT-PCR was performed to detect the OPG and OPG-L expression, and the house-keeping gene, GAPDH, was used as a reference for the semi-quantitative analysis. An increase in the OPG-L band density was observed for all cements, and consequently, the OPG-L/OPG ratio also increased. The ability of bone cements to induce the expression of OPG-L could be a co-factor in the development of osteolysis at the bone-cement interface.

Immunological changes in patients with primary osteoarthritis of the hip after total joint replacement.

We aimed to assess whether the immunological abnormalities which have been observed in patients with loose total hip replacements (THRs) are present in patients with a well-fixed prosthesis. We examined blood samples from 39 healthy donors, 22 patients before THR and 41 with well-fixed THRs of different types (15 metal-on-metal, 13 metal-on-polyethylene, 13 ceramic-on-ceramic). Before THR, the patients showed a decrease in leukocytes and myeloid cells in comparison with healthy donors, and a prevalence of type-1 T lymphocytes, which was confirmed by the increase in ratio of interferon-gamma to interleukin 4. Moreover, patients with metal-on-metal or metal-on-polyethylene implants showed a significant decrease in the number of T lymphocytes and a significant increase in the serum level of chromium and cobalt, although no significant correlation was observed with the immunological changes. In the ceramic-on-ceramic group, leukocytes and lymphocyte subsets were not significantly changed, but a significant increase in type-2 cytokines restored the ratio of interferon-gamma to interleukin 4 to normal values. We conclude that abnormalities of the cell-mediated immune response may be present in patients with a well-fixed THR, and that the immunological changes are more evident in those who have at least one metal component in the articular coupling.

The effect of poly(d,l-lactide-co-glycolide)-alendronate conjugate nanoparticles on human osteoclast precursors.

Nanoparticles (NPs) formed from polymers conjugated with bisphosphonates (BPs) allow the bone targeting of loaded drugs, such as doxorubicin, for the treatment of skeletal tumours. The additional antiosteoclastic effect of the conjugated BP could contribute to the inhibition of tumour-associated bone degradation. With this aim, we have produced NPs made of poly(d,l-lactide-co-glycolide) (PLGA) conjugated with alendronate (ALE). To show if ALE retained the antiosteoclastic properties after the conjugation with PLGA and the production of NPs, we treated human osteoclasts, derived from circulating precursors, with PLGA-ALE NPs and compared the effects on actin ring generation, apoptosis and type-I collagen degradation with those of free ALE and with NPs made of pure PLGA. PLGA-ALE NPs disrupted actin ring, induced apoptosis and inhibited collagen degradation. Unexpectedly, also NPs made of pure PLGA showed similar effects. Therefore, we cannot exclude that in addition to the observed antiosteoclastic activity dependent on ALE in PLGA-ALE NPs, there was also an effect due to pure PLGA. Still, as PLGA-ALE NPs are intended for the loading with drugs for the treatment of osteolytic bone metastases, the additional antiosteoclastic effect of PLGA-ALE NPs, and even of PLGA, may contribute to the inhibition of the disease-associated bone degradation.

A novel biomaterial for osteotropic drug nanocarriers: synthesis and biocompatibility evaluation of a PLGA-ALE conjugate.

BACKGROUND & AIMS: Osteotropic drug-delivery systems have been proposed as a means to provide drugs with affinity to bone tissues. Drugs or proteins have been linked chemically to bone-seeking agents, such as bisphosphonates (BPs); alternatively, drug-loaded nanoparticles have been used to target specific tissues, such as tumor areas. In our current research, these approaches were merged by synthesizing a novel bone-seeking polymer conjugate, from which targetable nanoparticles can be produced. MATERIALS & METHODS: An amino-BP, alendronate (ALE) was bound covalently to a biodegradable polymer, poly(lactic-co-glycolide) (PLGA), containing a free end carboxylic group. Blood compatibility and cytotoxicity were assessed in vitro. RESULTS & DISCUSSION: By a classical solvent-evaporation method, nanoparticles with a mean size of 200-300 nm were prepared from the conjugate; sterilization was achieved by gamma-irradiation, confirming their potential as injectable drug nanocarriers. Owing to the presence of the BP residue, PLGA-ALE nanoparticles were adsorbed onto hydroxyapatite to a higher extent than pure PLGA nanoparticles. The PLGA-ALE conjugate did not induce either hemolysis or alterations of the plasmatic phase of coagulation, or cytotoxic effects on endothelial cells and trabecular osteoblasts. CONCLUSION: The prepared conjugate represents a novel biomaterial that is able to provide nanoparticles, which can be further loaded with drugs, such as anticancer agents, and addressed to osteolytic or other bone diseases.