New prospects in skin regeneration and repair using nanophased hydroxyapatite embedded in collagen nanofibers.

This study reflects an exploitation of a composite matrix produced by electrospinning of collagen and electrospraying of nanophased hydroxyapatite (nanoHA), for skin regeneration applications. The main goal was to evaluate the effect of nanoHA, as source of localized calcium delivery, on human dermal fibroblasts, keratinocytes, and human mesenchymal stem cells (hMSCs) growth, proliferation, differentiation, and extracellular matrix production. This study revealed that calcium ions provided by nanoHA significantly enhanced cellular growth and proliferation rates and prevented adhesion of pathogenic bacteria strains typically found in human skin flora. Moreover, hMSCs were able to differentiate in both osteogenic and adipogenic lineages. Rat subcutaneous implantation of the membranes also revealed that no adverse reaction occurred. Therefore, the mechanically fit composite membrane presents a great potential to be used either as cell transplantation scaffold for skin wound regeneration or as wound dressing material in plastic surgery, burns treatment or skin diseases.

A Fast Alternative to Soft Lithography for the Fabrication of Organ-on-a-Chip Elastomeric-Based Devices and Microactuators.

Organ-on-a-chip technology promises to revolutionize how pre-clinical human trials are conducted. Engineering an in vitro environment that mimics the functionality and architecture of human physiology is essential toward building better platforms for drug development and personalized medicine. However, the complex nature of these devices requires specialized, time consuming, and expensive fabrication methodologies. Alternatives that reduce design-to-prototype time are needed, in order to fulfill the potential of these devices. Here, a streamlined approach is proposed for the fabrication of organ-on-a-chip devices with incorporated microactuators, by using an adaptation of xurography. This method can generate multilayered, membrane-integrated biochips in a matter of hours, using low-cost benchtop equipment. These devices are capable of withstanding considerable pressure without delamination. Furthermore, this method is suitable for the integration of flexible membranes, required for organ-on-a-chip applications, such as mechanical actuation or the establishment of biological barrier function. The devices are compatible with cell culture applications and present no cytotoxic effects or observable alterations on cellular homeostasis. This fabrication method can rapidly generate organ-on-a-chip prototypes for a fraction of cost and time, in comparison to conventional soft lithography, constituting an interesting alternative to the current fabrication methods.

Tissue-specific engineering: 3D bioprinting in regenerative medicine.

Despite its complexity, the human body is composed of only four basic tissue types, namely epithelial, connective, muscular and nervous tissues. Notably, each tissue is an assemblage of similarly functional cells united in performing a specific function. Instead of mimicking functionality mechanically, three-dimensional (3D) bioprinting based on histological categories is a strategy designed with multiple materials and techniques, which is a versatile technology able to form functional organ structures in line with simplicity. This review aims to provide an overview of tissue-specific 3D bioprinting based on the biological characteristics of four tissue types, including the histological features, biomaterials and corresponding applications. It first briefly introduces the goals of tissue-specific bioprinting and then summarizes the major techniques and identification of particular material development. Moreover, its remarkable regenerative power in replacement therapy and novel outbreak in particular tissues are assembled by epithelial, connective, nerve and muscle tissues. Finally, we discuss challenges and future prospects of tissue-specific based 3D bioprinting in biomedicine, hoping to further inspire the development.

Incorporation of graphene oxide into poly(ɛ-caprolactone) 3D printed fibrous scaffolds improves their antimicrobial properties.

Implantable medical devices infection and consequent failure is a severe health issue, which can result from bacterial adhesion, growth, and subsequent biofilm formation at the implantation site. Graphene-based materials, namely graphene oxide (GO), have been described as potential antibacterial agents when immobilized and exposed in polymeric matrices. This work focuses on the development of antibacterial and biocompatible 3D fibrous scaffolds incorporating GO. Poly(ε-caprolactone) scaffolds were produced, with and without GO, using wet-spinning combined with additive manufacturing. Scaffolds with different GO loadings were evaluated regarding physical-chemical characterization, namely GO surface exposure, antibacterial properties, and ability to promote human cells adhesion. Antimicrobial properties were evaluated through live/dead assays performed with Gram-positive and Gram-negative bacteria. 2 h and 24 h adhesion assays revealed a time-dependent bactericidal effect in the presence of GO, with death rates of adherent S. epidermidis and E. coli reaching ~80% after 24 h of contact with scaffolds with the highest GO concentration. Human fibroblasts cultured for up to 14 days were able to adhere and spread over the fibers, independently of the presence of GO. Overall, this work demonstrates the potential of GO-containing fibrous scaffolds to be used as biomaterials that hinder bacterial infection, while allowing human cells adhesion.

Ultrasound sonication prior to electrospinning tailors silk fibroin/PEO membranes for periodontal regeneration.

In this study, silk fibroin (SF)/poly(ethylene oxide) (PEO) membranes were designed and fabricated by combining ultrasound sonication prior to electrospinning (0 to 20 min) as a strategy to physically control the rheological properties of solutions (10 to 30% w/v PEO) and to improve the spinnability of the system. PEO has proved to be essential as a co-spinning agent to assure good membrane reproducibility and enough flexibility for clinical manipulation. The rheological tests indicated that sonication greatly increased the viscosity of SF/PEO solutions and further enhanced the quality of the produced electrospun fibers with consequent improved mechanical properties in dry and wet conditions. By tuning the viscosity of the solutions using a simple sonication step prior to electrospinning, it was possible to induce water stability in the as-electrospun matrix, as demonstrated by infra-red spectroscopy. This reduced complexity in the process since it was not necessary to concentrate silk prior to electrospinning while avoiding the use of toxic solvents to perform a post-processing stabilization treatment which usually causes dimensional changes to the SF materials. Sonication pre-treatment allowed for minimizing the amount of synthetic polymer used to achieve the desirable mechanical properties (with the modulus ranging between 90 and 170 MPa), while avoiding a further water stabilization treatment. It also had a positive impact in the in vitro cell behavior of human primary periodontal ligament cells (hPDLs), resulting in a marked increase in cell proliferation. The present developed work constitutes a step forward towards simplicity and a better fabrication control of viable electrospun SF-based membranes for periodontal regeneration.

Characterization and antitumor activity of the extracellular carbohydrate polymer from the cyanobacterium Synechocystis ΔsigF mutant.

Cyanobacterial extracellular carbohydrate polymers are particularly attractive for biotechnological applications. Previously, we determined the monosaccharidic composition of the polymer of a Synechocystis ΔsigF overproducing mutant. Here, we further characterized this polymer, demonstrated that it is possible to recover it in high yields, and successfully use it for biomedical research. This amorphous polymer is formed by a mesh of fibrils/lamellar structures with high porosity, is constituted by high molecular mass fractions, is highly sulfated and displays low viscosity, even in highly concentrated aqueous solutions. FTIR analysis confirmed the presence of several functional groups. We demonstrated that the ΔsigF polymer has strong biological activity, decreasing the viability of melanoma, thyroid and ovary carcinoma cells by inducing high levels of apoptosis, through p53 and caspase-3 activation. Therefore, the ΔsigF Synechocystis mutant is a promising platform for the sustainable production of biological active carbohydrate polymer(s) with the desired characteristics for biomedical applications.

Impact of surfactants on the target recognition of Fab-conjugated PLGA nanoparticles.

Targeted drug delivery with nanoparticles (NPs) requires proper surface ligand presentation and availability. Surfactants are often used as stabilizers in the production of targeted NPs. Here, we evaluated the impact of surfactants on ligand functionalization and downstream molecular recognition. Our model system consisted of fluorescent poly(lactic-co-glycolic acid) (PLGA) NPs that were nanoprecipitated in one of a small panel of commonly-used surfactants followed by equivalent washes and conjugation of an engineered Fab antibody fragment. Size, polydispersity index and zeta potential were determined by dynamic light scattering and laser Doppler anemometry, and Fab presence on the NPs was assessed by enzyme-linked immunosorbent assay. Most importantly, Fab-decorated NP binding to the cell surface receptor was monitored by fluorescence-activated cell sorting. 2% polyvinyl alcohol, 1% sodium cholate, 0.5% Pluronic F127 (F127) and 2% Tween-80 were initially tested. Of the four surfactants tested, PLGA NPs in 0.5% F127 and 2% Tween-80 had the highest cell binding. These two surfactants were then retested in two different concentrations, 0.5% and 2%. The Fab-decorated PLGA NPs in 2% F127 had the highest cell binding. This study highlights the impact of common surfactants and their concentrations on the downstream targeting of ligand-decorated NPs. Similar principles should be applied in the development of future targeted nanosystems where surfactants are employed.

Fab-conjugated PLGA nanoparticles effectively target cancer cells expressing human CD44v6.

Targeting of CD44 isoforms containing exon v6 (CD44v6) represents a viable strategy for the therapy and/or early diagnosis of metastatic cancers of the epithelium (e.g. gastric and colorectal cancer). We developed and characterized poly(lactic-co-glycolic acid) (PLGA)-based nanoparticles (NPs) modified with polyethylene glycol (PEG) and engrafted, by site-directed conjugation, with an engineered human Fab that specifically target human CD44v6 (v6 Fab-PLGA NPs). The v6 Fab-PLGA NPs displayed spherical morphology around 300 nm and were negatively charged. They strongly bound to a CD44v6-derived peptide and, more importantly, to cells that endogenously and exogenously express CD44v6, but not to non-expressing cells and cells expressing the standard isoform of CD44. The v6 Fab-PLGA NPs also recognized CD44v6 in tumor sections from cells grown subcutaneously within mice. The NPs had nominal cytotoxicity at 50 µg/mL and withstood simulated intestinal fluid exposure. Interestingly, v6 Fab-PLGA NPs cryopreserved in 10% trehalose and stored maintained specific cell binding. In conclusion, we envision NPs targeting CD44v6 as potential in vivo diagnostic agents and/or as anti-cancer agents in patients previously stratified with CD44v6+ carcinomas. STATEMENT OF SIGNIFICANCE: The v6 Fab-PLGA NPs displayed many favorable qualities as a potential CD44v6-targeted drug and/or diagnostic delivery agent. The NPs were designed for optimal ligand orientation and for immediate administration into humans. v6 Fab-PLGA NPs strongly bound to cells that endogenously and exogenously express CD44v6, but not to non-expressing cells and cells expressing the standard isoform of CD44. Binding ability was retained after freeze-drying and long-term storage, providing evidences on the stability of Fab-functionalized NPs. These NPs can potentially be used as an in vivo diagnostic from parenteral or oral/rectal administration.

Molecularly Imprinted Intelligent Scaffolds for Tissue Engineering Applications.

The development of molecularly imprinted polymers (MIPs) using biocompatible production methods enables the possibility to further exploit this technology for biomedical applications. Tissue engineering (TE) approaches use the knowledge of the wound healing process to design scaffolds capable of modulating cell behavior and promote tissue regeneration. Biomacromolecules bear great interest for TE, together with the established recognition of the extracellular matrix, as an important source of signals to cells, both promoting cell-cell and cell-matrix interactions during the healing process. This review focuses on exploring the potential of protein molecular imprinting to create bioactive scaffolds with molecular recognition for TE applications based on the most recent approaches in the field of molecular imprinting of macromolecules. Considerations regarding essential components of molecular imprinting technology will be addressed for TE purposes. Molecular imprinting of biocompatible hydrogels, namely based on natural polymers, is also reviewed here. Hydrogel scaffolds with molecular memory show great promise for regenerative therapies. The first molecular imprinting studies analyzing cell adhesion report promising results with potential applications for cell culture systems, or biomaterials for implantation with the capability for cell recruitment by selectively adsorbing desired molecules.

Additive manufactured polymeric 3D scaffolds with tailored surface topography influence mesenchymal stromal cells activity.

Additive manufactured three-dimensional (3D) scaffolds with tailored surface topography constitute a clear advantage in tissue regeneration strategies to steer cell behavior. 3D fibrous scaffolds of poly(ethylene oxide terephthalate)/poly(butylene terephthalate) block copolymer presenting different fiber surface features were successfully fabricated by additive manufacturing combined with wet-spinning, in a single step, without any post-processing. The optimization of the processing parameters, mainly driven by different solvent/non-solvent combinations, led to four distinct scaffold types, with average surface roughness values ranging from 0.071 ± 0.012 µm to 1.950 ± 0.553 µm, average pore sizes in the x- and y-axis between 351.1 ± 33.6 µm and 396.1 ± 32.3 µm, in the z-axis between 36.5 ± 5.3 µm and 70.7 ± 8.8 µm, average fiber diameters between 69.4 ± 6.1 µm and 99.0 ± 9.4 µm, and porosity values ranging from 60.2 ± 0.8% to 71.7 ± 2.6%. Human mesenchymal stromal cells (hMSCs) cultured on these scaffolds adhered, proliferated, and produced endogenous extracellular matrix. The effect of surface roughness and topography on hMSCs differentiation was more evident for cells seeded at lower density, where the percentage of cells in direct contact with the surface was higher compared to more densely seeded scaffolds. Under osteogenic conditions, lower surface roughness values (0.227 ± 0.035 µm) had a synergistic effect on hMSCs behavior, while chondrogenesis was favored on rougher surfaces (1.950 ± 0.553 µm).

Microfluidic Assembly of a Multifunctional Tailorable Composite System Designed for Site Specific Combined Oral Delivery of Peptide Drugs.

Multifunctional tailorable composite systems, specifically designed for oral dual-delivery of a peptide (glucagon-like peptide-1) and an enzymatic inhibitor (dipeptidyl peptidase 4 (DPP4)), were assembled through the microfluidics technique. Both drugs were coloaded into these systems for a synergistic therapeutic effect. The systems were composed of chitosan and cell-penetrating peptide modified poly(lactide-co-glycolide) and porous silicon nanoparticles as nanomatrices, further encapsulated in an enteric hydroxypropylmethylcellulose acetylsuccinate polymer. The developed multifunctional systems were pH-sensitive, inherited by the enteric polymer, enabling the release of the nanoparticles only in the simulated intestinal conditions. Moreover, the encapsulation into this polymer prevented the degradation of the nanoparticles' modifications. These nanoparticles showed strong and higher interactions with the intestinal cells in comparison with the nonmodified ones. The presence of DPP4 inhibitor enhanced the peptide permeability across intestinal cell monolayers. Overall, this is a promising platform for simultaneously delivering two drugs from a single formulation. Through this approach peptides are expected to increase their bioavailability and efficiency in vivo both by their specific release at the intestinal level and also by the reduced enzymatic activity. The use of this platform, specifically in combination of the two antidiabetic drugs, has clinical potential for the therapy of type 2 diabetes mellitus.

Role of protein environment and bioactive polymer grafting in the S. epidermidis response to titanium alloy for biomedical applications.

Joint implant-related infections, namely by Staphylococci, are a worldwide problem, whose consequences are dramatic. Various methods are studied to fight against these infections. Here, the proposed solution consists in grafting a bioactive polymer on joint implant surfaces in order to allow the control of the interactions with the living system. In this study, sodium styrene sulfonate, bearing sulfonate groups, was grafted on the surface of titanium alloys. Scanning Electron Microscopy, colorimetric method, Fourier-transformed infrared spectroscopy and contact angle measurements were applied to characterize the surfaces. Bacterial adhesion studies were studied on poly(sodium styrene sulfonate) grafted Ti6Al4V and Ti6Al4V surfaces previously adsorbed by proteins involved in the bacteria adhesion process. Fibrinogen and fibronectin were demonstrated to increase staphylococcal adhesion on Ti6Al4V surfaces. Ti6Al4V grafted sodium styrene sulfonate surfaces inhibited the adhesion of Staphylococcus epidermidis in 37% and 13% on pre-adsorbed surfaces with fibrinogen and fibronectin, respectively. The mechanism of the observed inhibiting bacteria adhesion properties is related to the differences of proteic conformations induced by poly(sodium styrene sulfonate) grafting.

Influence of the stiffness of three-dimensional alginate/collagen-I interpenetrating networks on fibroblast biology.

Wound dressing biomaterials are increasingly being designed to incorporate bioactive molecules to promote healing, but the impact of matrix mechanical properties on the biology of resident cells orchestrating skin repair and regeneration remains to be fully understood. This study investigated whether tuning the stiffness of a model wound dressing biomaterial could control the behavior of dermal fibroblasts. Fully interpenetrating networks (IPNs) of collagen-I and alginate were fabricated to enable gel stiffness to be tuned independently of gel architecture, polymer concentration or adhesion ligand density. Three-dimensional cultures of dermal fibroblasts encapsulated within matrices of different stiffness were shown to promote dramatically different cell morphologies, and enhanced stiffness resulted in upregulation of key-mediators of inflammation such as IL-10 and COX-2. These findings suggest that simply modulating the matrix mechanical properties of a given wound dressing biomaterial deposited at the wound site could regulate the progression of wound healing.

The impact of nanoparticles on the mucosal translocation and transport of GLP-1 across the intestinal epithelium.

Glucagon like peptide-1 (GLP-1) is an incretin hormone that is in the pipeline for type 2 diabetes mellitus (T2DM) therapy. However, oral administration of GLP-1 is hindered by the harsh conditions of the gastrointestinal tract and poor bioavailability. In this study, three nanosystems composed by three different biomaterials (poly(lactide-co-glycolide) polymer (PLGA), Witepsol E85 lipid (solid lipid nanoparticles, SLN) and porous silicon (PSi) were developed and loaded with GLP-1 to study their permeability in vitro. All the nanoparticles presented a size of approximately 200 nm. The nanoparticles' interaction with the mucus and the intestinal cells were enhanced after coating with chitosan (CS). PSi nanosystems presented the best association efficiency (AE) and loading degree (LD), even though a high AE was also observed for PLGA nanoparticles and SLN. Among all the nanosystems, PLGA and PSi were the only nanoparticles able to sustain the release of GLP-1 in biological fluids when coated with CS. This characteristic was also maintained when the nanosystems were in contact with the intestinal Caco-2 and HT29-MTX cell monolayers. The CS-coated PSi nanoparticles showed the highest GLP-1 permeation across the intestinal in vitro models. In conclusion, PLGA + CS and PSi + CS are promising nanocarriers for the oral delivery of GLP-1.

Functionalization of biomaterials with small osteoinductive moieties.

Human mesenchymal stem cells (MSCs) are currently recognized as a powerful cell source for regenerative medicine, notably for their capacity to differentiate into multiple cell types. The combination of MSCs with biomaterials functionalized with instructive cues can be used as a strategy to direct specific lineage commitment, and can thus improve the therapeutic efficacy of these cells. In terms of biomaterial design, one common approach is the functionalization of materials with ligands capable of directly binding to cell receptors and trigger specific differentiation signaling pathways. Other strategies focus on the use of moieties that have an indirect effect, acting, for example, as sequesters of bioactive ligands present in the extracellular milieu that, in turn, will interact with cells. Compared with complex biomolecules, the use of simple compounds, such as chemical moieties and peptides, and other small molecules can be advantageous by leading to less expensive and easily tunable biomaterial formulations. This review describes different strategies that have been used to promote substrate-mediated guidance of osteogenic differentiation of immature osteoblasts, osteoprogenitors and MSCs, through chemically conjugated small moieties, both in two- and three-dimensional set-ups. In each case, the selected moiety, the coupling strategy and the main findings of the study were highlighted. The latest advances and future perspectives in the field are also discussed.

Biocompatibility and biodegradation of polycaprolactone-sebacic acid blended gels.

Tissue engineering aims at creating biological body parts as an alternative for transplanting tissues and organs. A current new approach for such materials consists in injectable biodegradable polymers. Their major advantages are the ability to fill-in defects, easy incorporation of therapeutic agents or cells, and the possibility of minimal invasive surgical procedures. Polycaprolactone (PCL) is a promising biodegradable and elastic biomaterial, with the drawback of low-degradation kinetics in vivo. In this work a biodegradable injectable gel of PCL blended with sebacic acid (SA) was prepared, to improve the degradation rate of the biomaterial. SA is known for its high degradation rate, although in high concentrations it could originate a pH decrease and thus disturb the biocompatibility of PCL. Degradation tests on phosphate buffered saline were carried out using 5% of SA on the blend and the biomaterial stability was evaluated after degradation using differential scanning calorimetry, dynamical mechanical analysis, and scanning electronic microscopy. After degradation the elastic properties of the blend decreased and the material became more crystalline and stiffer, although at a lower extent when compared with pure PCL. The blend also degraded faster with a loss of the crystalline phase on the beginning (30 days), although its thermal and mechanical properties remained comparable with those of the pure material, thus showing that it achieved the intended objectives. After cell assays the PCL-SA gel was shown to be cytocompatible and capable of maintaining high cell viability (over 90%).

Injectable biodegradable polycaprolactone-sebacic acid gels for bone tissue engineering.

Tissue engineering constitutes a promising alternative technology to transplantation medicine by creating viable substitutes for failing tissues or organs. The ability to manipulate and reconstitute tissue function has tremendous clinical implications and will most likely play a key role in cell and gene therapies in the coming years. In the present work, a novel injectable and biodegradable biomaterial is reported that could be injected on the human body with a surgical syringe. The material prepared is a blend of polycaprolactone (PCL), a biodegradable and elastic biomedical polymer, and sebacic acid, a natural polymer part of castor oil with low molecular weight to accelerate the slow degradation rate of PCL. The biocompatibility of the blend was evaluated in vitro and its in vivo behavior was also assessed through subcutaneous and bone implantation in rats to evaluate its tissue-forming ability and degradation rate. The results allowed the conclusion that the gel is biocompatible, promotes the differentiation of mesenchymal stem cells, and presents an adequate degradation rate for use in bone tissue engineering. In vivo the gel blends promoted tissue regeneration and adverse reactions were not observed on subcutaneous and bone implants.

Anti-adhesion and antiproliferative cellulose triacetate membrane for prevention of biomaterial-centred infections associated with Staphylococcus epidermidis.

The initial step in preventing biomaterial-associated infections consists of preventing bacterial adhesion to the device surface. One possible approach is the design of antibiotic-releasing biomaterials. Cellulose triacetate (CTA) membranes with the antibiotic imipenem (IPM) entrapped (CTA-IPM) were prepared. The material was characterised in terms of surface morphology by scanning electron microscopy, surface free energy of interaction and X-ray photoelectron spectroscopy (XPS). Antibiotic release studies were also performed. In vitro adhesion of Staphylococcus epidermidis RP62A to CTA-IPM was investigated using a modified microtitre plate assay, and the antibacterial activity of the CTA-IPM membrane was assessed by a modified Kirby-Bauer test, which showed effective entrapment of the antibiotic as confirmed by XPS and hydrophilicity assays. Release studies showed that this drug-polymer conjugate serves as an adequate reservoir for sustained release of IPM over a period of 71h at an effective bacteriostatic concentration. Moreover, bacterial adhesion tests showed a statistically significant decrease in the adhesion of S. epidermidis RP62A to CTA-IPM compared with its adhesion to CTA alone. The present innovative approach is capable of providing a membrane with anti-adhesive and antiproliferative properties, thus encouraging in vivo studies to provide a better simulation of the clinical situation.

The correlation between the adsorption of adhesive proteins and cell behaviour on hydroxyl-methyl mixed self-assembled monolayers.

The objective of this study was to compare the biological effects of two key cell-adhesive proteins, fibronectin (FN) and vitronectin (VN), upon adsorption onto molecularly-designed model surfaces. Single-component and mixed self-assembled monolayers (SAMs) of alkanethiols on gold with OH and CH(3) terminal groups were prepared at 100%, 65%, 36% and 0% of OH at the surface, to generate a range of surfaces with a simple chemistry and a wettability gradient. FN and VN were adsorbed under non-competitive (single-protein solutions) and competitive (multi-protein solutions) conditions, and compared at different levels: adsorbed amount (radiolabelling), elution, functional presentation of cell-binding domains (ELISA), and role in mediating cell adhesion (antibody-based assay). The observed trends were related to mesenchymal stem cell response in terms of adhesion and overall cell morphology. Under non-competitive conditions, adsorption of both proteins increased with surface hydrophobicity. The presence of competitive proteins significantly decreased the adsorbed amounts, although both proteins were still detected in all SAMs. Adsorption of FN followed a trend similar to that of non-competitive conditions, while adsorption of VN was higher on 100%OH-SAMs. Concerning elution, retention of adsorbed VN was always higher than that of FN. For both proteins, functional presentation of cell-binding domains was more effective on the more hydrophilic 100%OH-SAMs. This fact, coupled to the ability of this type of SAMs to selectively recruit and retain VN in the presence of competitive serum proteins, seems to correlate with the better cell response observed on these surfaces, as compared with hydrophobic 0%OH(100%CH(3))-SAMs.