Effect of DMPEI coating against biofilm formation on PVC catheter surface.

Urinary tract infections (UTIs) are a significant cause of morbidity in healthcare systems and are prominently associated with applying urethral catheters, particularly in surgeries. Polyvinyl chloride (PVC) is extensively utilized in the fabrication of catheters. Biofilms, complex polymeric constructions, provide a protective milieu for cell multiplication and the enhancement of antibiotic resistance. Strategies to counteract biofilm development on medical apparatuses' surfaces incorporate antimicrobial agents such as N,N-dodecyl, and methyl polyethylenimine (DMPEI). This research endeavored to characterize the morphology of PVC and PVC-DMPEI surfaces utilizing Scanning Electron Microscopy (SEM) and Atomic Force Microscopy (AFM) and to gauge hydrophobicity through contact angle measurements. Employing Escherichia coli, Staphylococcus aureus, and Candida albicans in adhesion assays enabled the assessment of DMPEI's efficacy in preventing microbial adherence to PVC. Butanol successfully solubilized 2 mg.mL-1 DMPEI without altering the PVC structure. SEM results substantiated the formation of a DMPEI layer on the PVC surface, which led to decreased surface roughness, as validated by AFM, and increased hydrophilicity, as demonstrated by contact angle evaluations. E. coli, S. aureus, and C. albicans exhibited significant adhesion reduction, 89.3%, 94.3%, and 86.6% on PVC-DMPEI surfaces. SEM visualizations confirmed reduced cellular colonization on PVC-DMPEI and highlighted considerable morphological modifications in E. coli. Consequently, DMPEI films effectively minimize the adhesion of E. coli, S. aureus, and C. albicans on PVC surfaces. DMPEI, with its potential as a protective coating for innovative medical devices, promises to inhibit biofilm adherence effectively.

PVR/CD155 Ala67Thr Mutation and Cleft Lip/Palate.

The 19q13 locus has been linked to cleft lip and palate by our group and independently by others. Here we fine mapped the region in an attempt to identify an etiological variant that can explain cleft lip and palate occurrence. A total of 2739 individuals born with cleft lip and palate, related to individuals born with cleft lip and palate, and unrelated were studied. We used linkage and association approaches to fine map the interval between D19S714 and D19S433 and genotypes were defined by the use of TaqMan chemistry. We confirmed our previous findings that markers in PVR/CD155 are associated with cleft lip and palate. We studied the mutation Ala67Thr further and calculated its penetrance. We also attempted to detect PVR/CD155 expression in human whole saliva. Our results showed that markers in PVR/CD155 are associated with cleft lip and palate and the penetrance of the Ala67Thr is very low (between 1% and 5%). We could not detect PVR/CD155 expression in adult human whole saliva and PVR/CD155 possibly interacts with maternal infection to predispose children to cleft lip only.

Hydrophilic surface of Ti6Al4V-ELI alloy improves the early bone apposition of sheep tibia.

OBJECTIVE: The aim of this preclinical study was to compare histologically and histomorphometrically both sandblasted/acid-etched implant surfaces with or without maintained in an isotonic solution of 0.9% sodium chloride in early stages of osseointegration. MATERIAL AND METHODS: Both implant surfaces were composed of a titanium/aluminum/vanadium alloy (Ti6Al4V-ELI), but they had different surface chemistries: sandblasted/acid-etched titanium surface (FN) or sandblasted/acid-etched surface maintained in an isotonic solution of 0.9% sodium chloride (FA). The surface morphology, topography and chemistry were evaluated by scanning electron microscopy (SEM), confocal microscopy (CM) and X-ray photoelectron spectroscopy (XPS), respectively. Dynamic contact angle (DCA) was employed for wettability evaluation. One implant from each group was placed in the left tibia of twenty healthy, skeletally mature Santa Ines sheep (n = 5). Bone area (BA) and bone-to-implant contact (BIC) were performed on thin sections (30 µm) at 7, 14, 21 and 28 days after implant installation. RESULTS: Despite the roughness and morphology similarities between the groups, at the XPS evaluation, the FA group presented 2.3 times less carbon on the surface (FN: 27.3% and FA: 11.6%), sharply enhanced hydrophilicity and significantly enhanced BA and BIC at 14, 21 and 28 days of healing (P < 0.05) compared with the FN. CONCLUSION: The data suggest that the hydrophilic FA accelerates the BA apposition and BIC interface around the implants during early stages of bone formation, providing highest degree of osseointegration.

Genetic influences on dental enamel that impact caries differ between the primary and permanent dentitions.

Clinically, primary and permanent teeth are distinct anatomically and the presentation of caries lesions differs between the two dentitions. Hence, the possibility exists that genetic contributions to tooth formation of the two dentitions are different. The purpose of this study was to test the hypothesis that genetic associations with an artificial caries model will not be the same between primary and permanent dentitions. Enamel samples from primary and permanent teeth were tested for microhardness at baseline, after carious lesion creation, and after fluoride application to verify association with genetic variants of selected genes. Associations were found between genetic variants of ameloblastin, amelogenin, enamelin, tuftelin, tuftelin interactive protein 11, and matrix metallopeptidase 20 and enamel from permanent teeth but not with enamel from primary teeth. In conclusion, our data continue to support that genetic variation may impact enamel development and consequently individual caries susceptibility. These effects may be distinct between primary and permanent dentitions.

BMP2 Is Associated with Caries Experience in Primary Teeth.

Bone morphogenetic proteins (BMPs) play an important role during the initial process of enamel development and therefore may play a role in caries susceptibility. The purpose of this study was to evaluate the association between the polymorphisms in the BMP2, BMP4 and BMP7 genes and their association with caries experience and primary enamel microhardness characteristics. DNA from buccal cells as well as clinical and demographic information from 1,731 subjects from three different data sets from Brazil were included. Polymorphisms in BMP2, BMP4 and BMP7 were analyzed by real-time polymerase chain reaction from genomic DNA. Association between caries experience, genotype, and allele distribution in both cohorts was evaluated using χ(2) and logistic regression analyses. In the family-based set, the association between caries experience and alleles was tested using the transmission disequilibrium test. In the Rio de Janeiro cohort, microhardness data on 108 exfoliated primary teeth before and after demineralization and remineralization challenges was included. Associations between microhardness values and genotype and allele distribution were evaluated using χ(2) and logistic regression analyses. Differences between caries experience and some risk factors were statistically significant. In the cohort from Nova Friburgo, BMP2 was associated with caries experience in primary dentition during logistic regression analysis (p = 0.023; OR = 2.58; 95% CI 1.13-5.86). There was no association between genotype and allele distribution for BMP polymorphisms and primary enamel microhardness alterations. Our result suggests that BMP2 may be involved in caries experience in primary dentition from a Nova Friburgo cohort.

Chlorhexidine-loaded hydroxyapatite microspheres as an antimicrobial delivery system and its effect on in vivo osteo-conductive properties.

Hydroxyapatite (HA) has been investigated as a delivery system for antimicrobial and antibacterial agents to simultaneously stimulate bone regeneration and prevent infection. Despite evidence supporting the bactericidal efficiency of these HA carriers, few studies have focused on the effect of this association on bone regeneration. In this work, we evaluated the physico-chemical properties of hydroxyapatite microspheres loaded with chlorhexidine (CHX) at two different concentrations, 0.9 and 9.1 µgCHX/cm2 HA, and characterized their effects on in vitro osteoblast viability and bone regeneration. Ultraviolet-visible spectroscopy, scanning and transmission electron microscopy associated with energy-dispersive X-ray spectroscopy and electron energy loss spectroscopy were used to characterize the association of CHX and HA nanoparticles. The high CHX loading dose induced formation of organic CHX plate-like aggregates on the HA surface, whereas a Langmuir film was formed at the low CHX surface concentration. Quantitative evaluation of murine osteoblast viability parameters, including adhesion, mitochondrial activity and membrane integrity of cells exposed to HA/CHX extracts, revealed a cytotoxic effect for both loading concentrations. Histomorphological analysis upon implantation into the dorsal connective tissues and calvaria of rats for 7 and 42 days showed that the high CHX concentration induced the infiltration of inflammatory cells, resulting in retarded bone growth. Despite a strong decrease in in vitro cell viability, the low CHX loading dose did not impair the biocompatibility and osteoconductivity of HA during bone repair. These results indicate that high antimicrobial doses may activate a strong local inflammatory response and disrupt the long-term osteoconductive properties of CHX-HA delivery systems.

Different contribution of BRINP3 gene in chronic periodontitis and peri-implantitis: a cross-sectional study.

BACKGROUND: Peri-implantitis is a chronic inflammation, resulting in loss of supporting bone around implants. Chronic periodontitis is a risk indicator for implant failure. Both diseases have a common etiology regarding inflammatory destructive response. BRINP3 gene is associated with aggressive periodontitis. However, is still unclear if chronic periodontitis and peri-implantitis have the same genetic background. The aim of this work was to investigate the association between BRINP3 genetic variation (rs1342913 and rs1935881) and expression and susceptibility to both diseases. METHODS: Periodontal and peri-implant examinations were performed in 215 subjects, divided into: healthy (without chronic periodontitis and peri-implantitis, n = 93); diseased (with chronic periodontitis and peri-implantitis, n = 52); chronic periodontitis only (n = 36), and peri-implantitis only (n = 34). A replication sample of 92 subjects who lost implants and 185 subjects successfully treated with implants were tested. DNA was extracted from buccal cells. Two genetic markers of BRINP3 (rs1342913 and rs1935881) were genotyped using TaqMan chemistry. Chi-square (p < 0.05) compared genotype and allele frequency between groups. A subset of subjects (n = 31) had gingival biopsies harvested. The BRINP3 mRNA levels were studied by CT method (2(ΔΔCT)). Mann-Whitney test correlated the levels of BRINP3 in each group (p < 0.05). RESULTS: Statistically significant association between BRINP3 rs1342913 and peri-implantitis was found in both studied groups (p = 0.04). The levels of BRINP3 mRNA were significantly higher in diseased subjects compared to healthy individuals (p = 0.01). CONCLUSION: This study provides evidence that the BRINP3 polymorphic variant rs1342913 and low level of BRINP3 expression are associated with peri-implantitis, independently from the presence of chronic periodontitis.

Role of estrogen related receptor beta (ESRRB) in DFN35B hearing impairment and dental decay.

BACKGROUND: Congenital forms of hearing impairment can be caused by mutations in the estrogen related receptor beta (ESRRB) gene. Our initial linkage studies suggested the ESRRB locus is linked to high caries experience in humans. METHODS: We tested for association between the ESRRB locus and dental caries in 1,731 subjects, if ESRRB was expressed in whole saliva, if ESRRB was associated with the microhardness of the dental enamel, and if ESRRB was expressed during enamel development of mice. RESULTS: Two families with recessive ESRRB mutations and DFNB35 hearing impairment showed more extensive dental destruction by caries. Expression levels of ESRRB in whole saliva samples showed differences depending on sex and dental caries experience. CONCLUSIONS: The common etiology of dental caries and hearing impairment provides a venue to assist in the identification of individuals at risk to either condition and provides options for the development of new caries prevention strategies, if the associated ESRRB genetic variants are correlated with efficacy.

A study of the physical, chemical and biological properties of TiO2 coatings produced by micro-arc oxidation in a Ca-P-based electrolyte.

In this work, a porous and homogeneous titanium dioxide layer was grown on commercially pure titanium substrate using a micro-arc oxidation (MAO) process and Ca-P-based electrolyte. The structure and morphology of the TiO2 coatings were characterized by X-ray diffraction, scanning electron microscopy (SEM), transmission electron microscopy, and profilometry. The chemical properties were studied using electron dispersive X-ray spectroscopy (SEM-EDS) and X-ray photoelectron spectroscopy. The wettability of the coating was evaluated using contact angle measurements. During the MAO process, Ca and P ions were incorporated into the oxide layer. The TiO2 coating was composed of a mixture of crystalline and amorphous structures. The crystalline part of the sample consisted of a major anatase phase and a minor rutile phase. A cross-sectional image of the coating-substrate interface reveals the presence of voids elongated along the interface. An osteoblast culture was performed to verify the cytocompatibility of the anodized surface. The results of the cytotoxicity tests show satisfactory cell viability of the titanium dioxide films produced in this study.

Genome wide association scan for chronic periodontitis implicates novel locus.

BACKGROUND: There is evidence for a genetic contribution to chronic periodontitis. In this study, we conducted a genome wide association study among 866 participants of the University of Pittsburgh Dental Registry and DNA Repository, whose periodontal diagnosis ranged from healthy (N = 767) to severe chronic periodontitis (N = 99). METHODS: Genotypingi of over half-million single nucleotide polymorphisms was determined. Analyses were done twice, first in the complete dataset of all ethnicities, and second including only samples defined as self-reported Whites. From the top 100 results, twenty single nucleotide polymorphisms had consistent results in both analyses (borderline p-values ranging from 1E-05 to 1E-6) and were selected to be tested in two independent datasets derived from 1,460 individuals from Porto Alegre, and 359 from Rio de Janeiro, Brazil. Meta-analyses of the Single nucleotide polymorphisms showing a trend for association in the independent dataset were performed. RESULTS: The rs1477403 marker located on 16q22.3 showed suggestive association in the discovery phase and in the Porto Alegre dataset (p = 0.05). The meta-analysis suggested the less common allele decreases the risk of chronic periodontitis. CONCLUSIONS: Our data offer a clear hypothesis to be independently tested regarding the contribution of the 16q22.3 locus to chronic periodontitis.

Role of TRAV locus in low caries experience.

Caries is the most common chronic, multifactorial disease in the world today; and little is still known about the genetic factors influencing susceptibility. Our previous genome-wide linkage scan has identified five loci related to caries susceptibility: 5q13.3, 13q31.1, 14q11.2, 14q 24.3, and Xq27. In the present study, we fine mapped the 14q11.2 locus to identify genetic contributors to caries susceptibility. Four hundred seventy-seven subjects from 72 pedigrees with similar cultural and behavioral habits and limited access to dental care living in the Philippines were studied. An additional 387 DNA samples from unrelated individuals were used to determine allele frequencies. For replication purposes, a total of 1,446 independent subjects from four different populations were analyzed based on their caries experience (low versus high). Forty-eight markers in 14q11.2 were genotyped using TaqMan chemistry. Transmission disequilibrium test was used to detect over transmission of alleles in the Filipino families, and Chi-square, Fisher's exact and logistic regression were used to test for association between low caries experience and variant alleles in the replication data sets. We finally assessed the mRNA expression of TRAV4 in the saliva of 143 study subjects. In the Filipino families, statistically significant associations were found between low caries experience and markers in TRAV4. We were able to replicate these results in the populations studied that were characteristically from underserved areas. Direct sequencing of 22 subjects carrying the associated alleles detects one missense mutation (Y30R) that is predicted to be probably damaging. Finally, we observed higher expression in children and teenagers with low caries experience, correlating with specific alleles in TRAV4. Our results suggest that TRAV4 may have a role in protecting against caries.

Genetic mapping of high caries experience on human chromosome 13.

BACKGROUND: Our previous genome-wide linkage scan mapped five loci for caries experience. The purpose of this study was to fine map one of these loci, the locus 13q31.1, in order to identify genetic contributors to caries. METHODS: Seventy-two pedigrees from the Philippines were studied. Caries experience was recorded and DNA was extracted from blood samples obtained from all subjects. Sixty-one single nucleotide polymorphisms (SNPs) in 13q31.1 were genotyped. Association between caries experience and alleles was tested. We also studied 1,481 DNA samples obtained from saliva of subjects from the USA, 918 children from Brazil, and 275 children from Turkey, in order to follow up the results found in the Filipino families. We used the AliBaba2.1 software to determine if the nucleotide changes of the associated SNPs changed the prediction of the presence of transcription-binding site sequences and we also analyzed the gene expression of the genes selected based on binding predictions. Mutation analysis was also performed in 33 Filipino individuals of a segment of 13q31.1 that is highly conserved in mammals. RESULTS: Statistically significant association with high caries experience was found for 11 markers in 13q31.1 in the Filipino families. Haplotype analysis also confirmed these results. In the populations used for follow-up purposes, associations were found between high caries experience and a subset of these markers. Regarding the prediction of the transcription-binding site, the base change of the SNP rs17074565 was found to change the predicted-binding of genes that could be involved in the pathogenesis of caries. When the sequence has the allele C of rs17074565, the potential transcription factors binding the sequence are GR and GATA1. When the subject carries the G allele of rs17074565, the potential transcription factor predicted to bind to the sequence is GATA3. The expression of GR in whole saliva was higher in individuals with low caries experience when compared to individuals with high caries experience (p = 0.046). No mutations were found in the highly conserved sequence. CONCLUSIONS: Genetic factors contributing to caries experience may exist in 13q31.1. The rs17074565 is located in an intergenic region and is predicted to disrupt the binding sites of two different transcription factors that might be involved with caries experience. GR expression in saliva may be a biomarker for caries risk and should be further explored.

The impact of the RGD peptide on osteoblast adhesion and spreading on zinc-substituted hydroxyapatite surface.

The incorporation of zinc into the hydroxyapatite structure (ZnHA) has been proposed to stimulate osteoblast proliferation and differentiation. Another approach to improve cell adhesion and hydroxyapatite (HA) performance is coating HA with adhesive proteins or peptides such as RGD (arginine-glycine-aspartic acid). The present study investigated the adhesion of murine osteoblastic cells to non-sintered zinc-substituted HA disks before and after the adsorption of RGD. The incorporation of zinc into the HA structure simultaneously changed the topography of disk's surface on the nanoscale and the disk's surface chemistry. Fluorescence microscopy analyses using RGD conjugated to a fluorescein derivative demonstrated that ZnHA adsorbed higher amounts of RGD than non-substituted HA. Zinc incorporation into HA promoted cell adhesion and spreading, but no differences in the cell density, adhesion and spreading were detected when RGD was adsorbed onto ZnHA. The pre-treatment of disks with fetal bovine serum (FBS) greatly increased the cell density and cell surface area for all RGD-free groups, overcoming the positive contribution of zinc to cell adhesion. The presence of RGD on the ZnHA surface impaired the effects of FBS pre-treatment possibly due to competition between FBS proteins and RGD for surface binding sites.

Long-term biocompatibility evaluation of 0.5 % zinc containing hydroxyapatite in rabbits.

This study investigates the long-term biocompatibility of 0.5 % zinc-containing hydroxyapatite compared with hydroxyapatite. Spheres (425 < ∅ < 550) of both materials were produced by extrusion of ceramic slurry in calcium chloride and characterized by FTIR, XRD, XRF and SEM. Fifteen White New Zealand rabbits were submitted to general anesthesia, and an perforation (2 mm), was made in each tibia, one for zinc-containing hydroxyapatite sphere implantation and one for hydroxyapatite sphere implantation. After 26, 52 and 78 weeks, the animals were euthanized, and the fragment containing the biomaterial was harvested. A 30-50 µm section was obtained for histological analysis in bright field and polarized light. SEM images revealed similar morphologies between the tested biomaterials. Histological analysis showed that there was no difference between the test groups. The morphometric analysis, however, indicates that there was a greater absorption. The materials are biocompatible, promote osteogenesis and that the zinc-containing hydroxyapatite microspheres were absorbed more quickly.

Intracellular signal transduction as a factor in the development of "smart" biomaterials for bone tissue engineering.

Signal transduction involves studying the intracellular mechanisms that govern cellular responses to external stimuli such as hormones, cytokines, and also cell adhesion to biomaterials surfaces. Several events have been shown to be responsible for cellular adhesion and adaptation onto different surfaces. For instance, cytoskeletal rearrangements during cell adhesion require the recruitment of specific protein tyrosine kinases into focal adhesion structures that promote transient focal adhesion kinase and Src phosphorylations, initially modulating cell behavior. In addition, the phosphorylation of tyrosine (Y) residues have been generally accepted as a critical regulator of a wide range of cell-related processes, including cell proliferation, migration, differentiation, survival signalling, and energy metabolism. The understanding of the signaling involved on the mechanisms of osteoblast adhesion, proliferation, and differentiation on implant surfaces is fundamental for the successful design of novel "smart" materials, potentially decreasing the repair time, thereby allowing for faster patient rehabilitation.

The effect of alterations on resorbable blasting media processed implant surfaces on early bone healing: a study in rabbits.

OBJECTIVES: Etching resorbable blasting media (RM) processed implants is a common engineering procedure, but the interplay between the resulting physicochemical properties and its effects on early bone healing have not been thoroughly addressed. METHODS: Screw-root form implant surfaces were treated with 1 of 3 methods: grit (alumina) blasted/acid etching, RM, and RM + acid etching (RMAA). Surface topography (n = 3 each) was characterized by scanning electron microscopy and atomic force microscopy and chemical characterization by x-ray photoelectron spectroscopy analysis. The implants were placed at the distal femur of 16 rabbits, where 3 implants, 1 from each surface, were placed bilaterally remaining 4 and 8 weeks in vivo. After euthanization, one half of the specimens were torqued to interface failure at a rate of ∼0.196 radians/min and the other half were nondecalcified processed for histomorphology and bone-to-implant contact evaluation. RESULTS: Physicochemical characterization showed that the grit (alumina) blasted/acid-etched surface was rougher than RM and RMAA. Higher levels of calcium and phosphorous were observed for the RM surface compared with the RMAA surface. No significant differences were observed in torque and bone-to-implant contact between surfaces at 4 or 8 weeks. Histomorphologic evaluation showed woven bone formation around all surfaces at 4 weeks, and its initial replacement by lamellar bone at 8 weeks. CONCLUSIONS: Despite differences in texture/chemistry, all implant surfaces were biocompatible and osseoconductive, and led to comparable in vivo bone fixation and measurable histomorphometric parameters.

Impact of DMPEI on Biofilm Adhesion on Latex Urinary Catheter.

BACKGROUND: Microorganisms can migrate from the external environment to the patient's organism through the insertion of catheters. Despite being indispensable medical device, the catheter surface can be colonized by microorganisms and become a starting point for biofilm formation. Therefore, new technologies are being developed in order to modify surfaces to prevent the adhesion and survival of microorganisms. Patents with the use of DMPEI have been filed. OBJECTIVE: In the present work, we coated latex catheter surfaces with 2 mg mL-1 DMPEI in different solvents, evaluated the wettability of the surface and the anti- biofilm activity of the coated catheter against Escherichia coli, Staphylococcus aureus, and Candida albicans. METHODS: We coated the inner and outer catheter surfaces with 2 mg mL-1 of DMPEI solubilized in butanol, dimethylformamide, and cyclohexanone and the surfaces were analyzed visually. Contact angle measurement allowed the analysis of the wettability of the surfaces. The CFU mL-1 count evaluated E. coli, S. aureus, and C. albicans adhesion onto the control and treated surfaces. RESULTS: The contact angle decreased from 50.48º to 46.93º on the inner surface and from 55.83º to 50.91º on the outer surface of latex catheters coated with DMPEI. The catheter coated with DMPEI showed anti-biofilm activity of 83%, 88%, and 93% on the inner surface and 100%, 92%, and 86% on the outer surface for E. coli, S. aureus, and C. albicans, respectively. CONCLUSION: Latex catheter coated with DMPEI efficiently impaired the biofilm formation both on the outer and inner surfaces, showing a potential antimicrobial activity along with a high anti-biofilm activity for medical devices.

In Vitro and In Vivo Evaluation of Nanostructured Biphasic Calcium Phosphate in Granules and Putty Configurations.

Synthetic biphasic calcium phosphate (BCP) granules and powder are biocompatible biomaterials with a well-known capacity for osteoconduction, presenting very satisfactory clinical and histological results. It remains unanswered if the putty configuration impacts the biological response to the material. In this study, we aimed to compare the cytocompatibility and biocompatibility of nanostructured BCP in the putty configuration (moldable nanostructured calcium phosphate, MnCaP) on the healing of critical-sized bone defects (8 mm) in rat calvaria. Cytocompatibility was determined through the viability of fibroblast cells (V-79) to the extracts of different concentrations of MnCaP. Forty-five Wistar rats were randomly divided into three groups (n = 15)-clot, MnCaP, and commercial biphasic calcium phosphate in granules configurations (Nanosynt®)-and subdivided into three experimental periods (1, 3, and 6 months). Histological, histomorphometric, and microtomographic analyses allowed the evaluation of newly formed bone, residual biomaterial, and connective tissue. The in vitro evaluation showed that MnCaP was cytocompatible. The histomorphometric results showed that the Nanosynt® group granted the highest new-formed bone values at six months (p < 0.05), although the biomaterial volume did not differ between groups. The putty configuration was easier to handle, and both configurations were biocompatible and osteoconductive, presented similar biosorption rates, and preserved the calvaria architecture.

Studies with Wnt genes and nonsyndromic cleft lip and palate.

BACKGROUND: Clefts of the lip and/or palate (cleft lip/palate) are notable for their complex etiology. The WNT pathway regulates multiple developmental processes including craniofacial development and may play a role in cleft lip/palate and other defects of craniofacial development such as tooth agenesis. Variations in WNT genes have been recently associated with cleft lip/palate in humans. In addition, two WNT genes, Wnt3 and Wnt9B, are located in the clf1 cleft locus in mice. METHODS: We investigated 13 SNPs located in Wnt3A, Wnt5A, Wnt8A, Wnt11, Wnt3, and Wnt9B genes for association with cleft lip/palate subphenotypes in 463 cleft cases and 303 unrelated controls. Genotyping of selected polymorphisms was carried out using Taqman assays. PLINK 1.06 software was used to test for differences in allele frequencies of each polymorphism between affected and unaffected individuals. Haplotype analysis was also performed. RESULTS: Individuals carrying variant alleles in WNT3 presented an increased risk for cleft lip/palate (p = 0.0003; OR, 1.61; 95% CI, 1.29-2.02) in the population studied. CONCLUSION: Our results continue to support a role for WNT genes in the pathogenesis of cleft lip/palate. Although much remains to be learned about the function of individual WNT genes during craniofacial development, additional studies should focus on the identification of potentially functional variants in these genes as contributors to human clefting. Birth Defects Research (Part A), 2010. © 2010 Wiley-Liss, Inc.

Effect of surface modifications on early bone healing around plateau root form implants: an experimental study in rabbits.

PURPOSE: The objective of the present study was to evaluate the biomechanical fixation and bone-to-implant contact (BIC) of plateau root form implants of varied surfaces. MATERIALS AND METHODS: Plateau root form implants, 3.5 mm in diameter, 8 mm in length, with 4 surfaces (n = 16 each)--machined, alumina-blasted/acid-etched, alumina-blasted/acid-etched plus nanothickness bioceramic coating, and plasma-sprayed calcium-phosphate--were used. They were bilaterally placed at the distal femur of 16 New Zealand rabbits and remained in place for 2 and 4 weeks in vivo. After euthanizing the rabbits, the implants were subjected to torque to interface fracture and were subsequently processed as nondecalcified approximately 30-microm-thickness slides for histomorphologic analysis and BIC determination. Statistical analysis was performed using analysis of variance at the 95% level of significance, considering implantation time and implant surface as independent variables and the torque-to-interface fracture and BIC as dependent variables. RESULTS: The torque-to-interface fracture was significantly affected by the implant surface (P < .001) but was not affected by the implantation time (P > .20). The implantation time and implant surface had significant effects on the BIC (P < .04 and P < .001, respectively). The greatest torque-to-interface fracture and BIC was observed for the plasma-sprayed calcium-phosphate. CONCLUSION: The implant surface significantly influenced early bone healing around plateau root form implants.