Molecular insights into microbial transformation of bioaerosol-derived dissolved organic matter discharged from wastewater treatment plant.

Wastewater treatment plants (WWTP) are important sources of aerosol-derived dissolved organic matter (ADOM) which may threaten human health via the respiratory system. In this study, aerosols were sampled from a typical WWTP to explore the chemical molecular diversity, molecular ecological network, and potential toxicities of the ADOM in the aerosols. The high fluorescence index (>1.9) and biological index (0.66-1.17) indicated the strong autogenous microbial source characteristics of the ADOM in the WWTP. DOM and microbes in the wastewater were aerosolized due to strong agitation and bubbling in the treatment processes, and contributed to 74 % and 75 %, respectively, of the ADOM and microbes in the aerosols. The ADOM was mainly composed of CHO and CHOS accounting for 35 % and 29 % of the total number of molecules, respectively, with lignin-like (69 %) as the major constituent. 49 % of the ADOM transformations were thermodynamically limited, and intragroup transformations were easier than intergroup transformations. Bacteria in the aerosols involved in ADOM transformations exhibited both cooperative and divergent behaviors and tended to transform carbohydrate-like and amino sugar/protein-like into recalcitrant lignin-like. The microbial compositions were affected by atmosphere temperature and humidity indirectly by modulating the properties of ADOM. Tannin-like, lignin-like, and unsaturated hydrocarbon-like molecules in the ADOM were primary toxicity contributors, facilitating the expression of inflammatory factors IL-ß (2.2-5.4 folds), TNF-α (3.5-7.0 folds), and IL-6 (3.5-11.2 folds), respectively.

[A cervical cancer tissue-derived decellularized extracellular matrix scaffold for cervical cancer tissue reconstruction in vitro].

OBJECTIVE: The prepare decellularized extracellular matrix (ECM) scaffold materials derived from human cervical carcinoma tissues for 3D culture of cervical carcinoma cells. METHODS: Fresh human cervical carcinoma tissues were treated with sodium lauryl ether sulfate (SLES) solution to prepare decellularized ECM scaffolds. The scaffolds were examined for ECM microstructure and residual contents of key ECM components (collagen, glycosaminoglycan, and elastin) and genetic materials by pathological staining and biochemical content analysis. In vitro 3D culture models were established by injecting cultured cervical cancer cells into the prepared ECM scaffolds. The cells in the recellularized scaffolds were compared with those in a conventional 2D culture system for cell behaviors including migration, proliferation and epithelial-mesenchymal transition (EMT) wsing HE staining, immunohistochemical staining and molecular biological technology analysis. Resistance to 5-fluorouracil (5-Fu) of the cells in the two culture systems was tested by analyzing the cell apoptosis rates via flow cytometry. RESULTS: SLES treatment effectively removed cells and genetic materials from human cervical carcinoma tissues but well preserved the microenvironment structure and biological activity of ECM. Compared with the 2D culture system, the 3D culture models significantly promoted proliferation, migration, EMT and 5-Fu resistance of human cervical cancer cells. CONCLUSION: The decellularized ECM scaffolds prepared using human cervical carcinoma tissues provide the basis for construction of in vitro 3D culture models for human cervical cancer cells.

P, N, and C-related functional genes in SBR system promoted antibiotics resistance gene transmission under polystyrene microplastics stress.

Wastewater treatment plants (WWTPs) are important sinks of microplastics (MPs) and antibiotics resistance genes (ARGs). Information regarding connections between functional modules of WWTPs and spread of ARGs under MPs stress is still lacking. In this study, correlations between P-, N-, and C-related functional genes and ARGs in a sequencing batch reactor (SBR) system were evaluated under polystyrene (PS) MPs stress. Total P and chemical oxygen demand (COD) in effluent showed no significant changes under 0.5-50 mg L-1 PS MPs stress within 32 cycle treatment periods of SBR, while 0.5 mg L-1 PS MPs affected the N cycling process. PS MPs (0.5-50 mg L-1) promoted the richness and diversity of microbial community in SBR, and the denitrification process was exuberant. PS MPs with a low dosage (0.5-5 mg L-1) enhanced secretion of extracellular polymeric substances and promoted expression levels of functional genes related to C fixation, C degradation, P cycling, and N cycling. Simultaneously, aac(3)-II, blaTEM-1, and tetW increased by 27.13%, 38.36%, and 9.57% under low dosages of PS MPs stress; more importantly, the total absolute abundance of intI1 nearly doubled. 78.4% of these P-, N-, and C-related functional genes were positively correlated with intI1, thus favoring transmission of ARGs. This study firstly disclosed the underlying correlations between functional modules of WWTPs and spread of ARGs under MPs stress.

Anti-biofouling properties of amphiphilic phosphorylcholine polymer films.

Surfaces of amphiphilic phosphorylcholine polymer (PC1036) prepared by spin-coating were characterized by spectroscopic ellipsometry, water contact angle and atomic force microscopy. The antifouling properties of the PC1036 films to marine benthic diatom Nitzschia closterium MMDL533 were also investigated. The results showed that the dry PC1036 film promoted the adhesion of N. closterium MMDL533 because the hydrophobic lauryl groups were present in the film surface. The 2 h-swelled PC1036 films had excellent anti-fouling properties with extremely low attachment densities and retention densities no matter what the annealing temperature was. The thickness of the coated films lower than 147 Å had a profound effect on the film anti-fouling properties. Otherwise, when the film thickness was higher than that value, there was no more improvement of diatom cell reduction observed. The annealing temperature had only a little effect on the film resistant to diatom adhesion, which might be attributed to two factors including the PC group packing densities in the outer PC layer and the equilibrated water volume fraction in the 2 h-swelled PC1036 films.

Highly sensitive fluorescence quantification of picloram using immunorecognition liposome.

Picloram is a widely used chlorinated herbicide, which is quite persistent and mobile in soil and water with adverse health and environmental risks. A simple and efficient method with high sensitivity and good selectivity was developed in this work to analyze picloram. The aldehyde group functionalized quartz glass plate was used to catch picloram by Schiff base reaction, and reacted with the liposomes-labeled antibody. The fluorescein isothiocyanate (FITC) solution was encapsulated in the liposomes. After being released from the liposomes, the fluorescence of FITC was measured by a fluorimeter. It was found that the fluorescence intensity is linearly correlated to the logarithm of picloram concentration, ranging from 1.0 × 10(-4) to 100 ng mL(-1), with a detection limit of 1.0 × 10(-5) ng mL(-1). Picloram concentration in real wastewater samples were accurately measured by the proposed method and HPLC, the results of the two methods were approximately the same. The proposed method showed high sensitivity and good selectivity, and could be an efficient tool for picloram quantitative analysis.

[Lignin degradation by Penicillium simplicissimum].

A strain of fungi was isolated from soil, which was identified as Penicillium simplicissimum. This strain was capable of utilizing several lignin model compounds, making aromatic dyes decoloration and degrading natural lignin. All these results proved that Penicillium simplicissimum has ligninolytic ability. Three kinds of enzymes were believed to be the most important catalyzes in the biodegrading process. They are lignin peroxidase (LiP), laccase (Lac) and hemicellulase. And they always work synergistically. After 25 days' incubation, the amount of rice straw lignin decreased 0.23g, and the degrading rate was 14.94%. Different from the degrading mechanism of the white-rot fungi, the lignin degradation by P. simplicissimum mainly happened during the primary metabolism and it was greatly influenced by the pH of media, the concentration of Cu2+ and Mn2+.

Amperometric immunosensor based on polypyrrole/poly(m-pheylenediamine) multilayer on glassy carbon electrode for cytokinin N6-(Delta2-isopentenyl) adenosine assay.

A novel immunosensor based on a multilayer-coated glassy carbon electrode was designed to determine isopentenyl adenosine (iPA) in plants. The multilayer consists of polypyrrole and poly(m-phenylenediamine) with K4Fe(CN)6 and horseradish peroxidase (HRP) entrapped during electropolymerization. The ferrocyanide doped in polypyrrole functions as the mediator. The glucose oxidase bound on the immunosensor by the competitive immunoreaction involving iPA catalyzed the oxidation of the added glucose with the formation of H2O2, which is in turn reduced in the presence of HRP entrapped in poly(m-phenylenediamine). The current of the oxidized production of ferrocyanide reduced at -50 mV is inversely proportional to the concentration of iPA in the competitive immunoreaction. This immunosensor is able to be used about 40 times; after that its surface can be regenerated for a new immunosensor assembly by washing with 0.1M citrate-phosphate buffer (pH 4.6). The percentage of current response reduction (CR%) (y) is linearly related to the logarithm of the concentration of iPA (x) in the 5-300 microg/ml range, with a regression equation of the form y = 42.13x - 27.79 and a correlation coefficient of 0.9861. Five hybrid rice grain samples were analyzed with results in satisfactory agreement to those obtained by high-performance liquid chromatography.

Amperometric biosensor with HRP immobilized on a sandwiched nano-Au / polymerized m-phenylenediamine film and ferrocene mediator.

An amperometric biosensor has been developed for the determination of H(2)O(2) in plant samples. Horseradish peroxidase (HRP) is immobilized on a sandwiched nano-Au particle / m-phenylenediamine polymer film by glutaraldehyde cross-linking. The film is formulated on the carbon paste electrode (CPE) blended with ferrocene as an electron transfer mediator. On the low concentration range, the current response is related to the H(2)O(2) concentration linearly from 0 to 8x10(-6) M with a detection limit of 1.3x10(-7) M. On a wider concentration range of 8x10(-6) to 1.4x10(-4) M, the reciprocal of current response is linearly related to the reciprocal of H(2)O(2) concentration. The apparent Michaelis-Menten constant (K(m)(app)) was calculated to be 0.0334 mM. The sensor has been tested by determining H(2)O(2) concentration in plant leaf samples.