Surface Biofunctionalization of Gadolinium Phosphate Nanobunches for Boosting Osteogenesis/Chondrogenesis Differentiation.

In order to achieve smart biomedical micro/nanomaterials, promote interaction with biomolecules, improve osteogenic/chondrogenic differentiation, exhibit better dispersion in bone implants and ultimately maximize functionality, we innovatively and successfully designed and synthesized polymer PBLG-modified GdPO4·H2O nanobunches by hydroxylation, silylation and glutamylation processes. The effects of different feeding ratios on the surface coating of GdPO4·H2O with Si-OH, the grafting γ-aminopropyltriethoxysilane (APS) and the in situ ring-opening polymerization reaction of poly(g-benzyl-L-glutamate) (PBLG) were investigated, and the physical and chemical properties were characterized in detail. When GdPO4·H2O@SiO2-APS:NCA = 4:1, the PBLG-g-GdPO4·H2O grafting rate was 5.93%, with good stability and dispersion in degradable polymeric materials. However, the MRI imaging signal was sequentially weakened as the modification process proceeded. Despite this, the biological effects had surprising findings. All the modifiers at appropriate concentrations were biocompatible and biologically active and the biomacromolecules of COL I and COL II in particular were expressed at least 3 times higher in GdPO4·H2O@SiO2 compared to the PLGA. This indicates that the appropriate surface modification and functionalization of gadolinium-containing micro/nanomaterials can promote interaction with cells and encourage bone regeneration by regulating biomacromolecules and can be used in the field of biomedical materials.

Organic-inorganic composite hydrogels: compositions, properties, and applications in regenerative medicine.

Hydrogels, formed from crosslinked hydrophilic macromolecules, provide a three-dimensional microenvironment that mimics the extracellular matrix. They served as scaffold materials in regenerative medicine with an ever-growing demand. However, hydrogels composed of only organic components may not fully meet the performance and functionalization requirements for various tissue defects. Composite hydrogels, containing inorganic components, have attracted tremendous attention due to their unique compositions and properties. Rigid inorganic particles, rods, fibers, etc., can form organic-inorganic composite hydrogels through physical interaction and chemical bonding with polymer chains, which can not only adjust strength and modulus, but also act as carriers of bioactive components, enhancing the properties and biological functions of the composite hydrogels. Notably, incorporating environmental or stimulus-responsive inorganic particles imparts smartness to hydrogels, hence providing a flexible diagnostic platform for in vitro cell culture and in vivo tissue regeneration. In this review, we discuss and compare a set of materials currently used for developing organic-inorganic composite hydrogels, including the modification strategies for organic and inorganic components and their unique contributions to regenerative medicine. Specific emphasis is placed on the interactions between the organic or inorganic components and the biological functions introduced by the inorganic components. The advantages of these composite hydrogels indicate their potential to offer adaptable and intelligent therapeutic solutions for diverse tissue repair demands within the realm of regenerative medicine.

[3.0T-MR high resolution proton density weighted imaging for transverse cervical ligament in healthy adolescents].

OBJECTIVE: To explore the imaging characteristics of the transverse ligament in healthy adolescents, and further understand the imaging characteristics of the ligament injury. METHODS: We used 3.0T-MR to scan the transverse ligament with proton-weighted sequence in 32 young volunteers, scanned coronally, horizontally and sagittally, and then observed the morphology, thickness, running and signal characteristics of the ligament. RESULTS: The anatomy and signal characteristics of the transverse cervical ligament were clearly displayed by high resolution proton density weighted imaging (PDWI). The whole picture of the transverse ligament was effectively displayed by coronal combined with horizontal image. The transverse ligament was located in the rear of the odontoid, and connected to the inside of both sides of the block like half-arc. The length was (20.4±3.3) mm, the ligament center was the thickest, and both sides gradually became thinner. The middle width of the ligament was (7.3±0.6) mm, the ligament ends narrowed down, and the middle was (2.1±0.4) mm thick; 75% of the transverse ligament showed homogeneous low signal in PDWI, while 25% of the local transverse ligament had high signal. CONCLUSION: High resolution PDWI with 3.0T-MR is a effective method to evaluate the structure of the transverse cervical ligament. Local high signal may not necessarily be the sign of ligament injure. There may also be some high signal in the normal adolescent ligament, so we must pay much attention to clinical diagnosis and treatment.

Transcriptomic analysis reveals the potential crosstalk genes and immune relationship between IgA nephropathy and periodontitis.

Background: It is well known that periodontitis has an important impact on systemic diseases. The aim of this study was to investigate potential crosstalk genes, pathways and immune cells between periodontitis and IgA nephropathy (IgAN). Methods: We downloaded periodontitis and IgAN data from the Gene Expression Omnibus (GEO) database. Differential expression analysis and weighted gene co-expression network analysis (WGCNA) were used to identify shared genes. Then, Gene Ontology (GO) and Kyoto Encyclopedia of Genes and Genomes (KEGG) pathway enrichment analyses were performed on the shared genes. Hub genes were further screened using least absolute shrinkage and selection operator (LASSO) regression, and a receiver operating characteristic (ROC) curve was drawn according to the screening results. Finally, single-sample GSEA (ssGSEA) was used to analyze the infiltration level of 28 immune cells in the expression profile and its relationship with shared hub genes. Results: By taking the intersection of WGCNA important module genes and DEGs, we found that the SPAG4, CCDC69, KRT10, CXCL12, HPGD, CLDN20 and CCL187 genes were the most important cross-talk genes between periodontitis and IgAN. GO analysis showed that the shard genes were most significantly enriched in kinase regulator activity. The LASSO analysis results showed that two overlapping genes (CCDC69 and CXCL12) were the optimal shared diagnostic biomarkers for periodontitis and IgAN. The immune infiltration results revealed that T cells and B cells play an important role in the pathogenesis of periodontitis and IgAN. Conclusion: This study is the first to use bioinformatics tools to explore the close genetic relationship between periodontitis and IgAN. The SPAG4, CCDC69, KRT10, CXCL12, HPGD, CLDN20 and CCL187 genes were the most important cross-talk genes between periodontitis and IgAN. T-cell and B-cell-driven immune responses may play an important role in the association between periodontitis and IgAN.

Propulsion, deformation, and confinement response of hollow nanocellulose millimotors.

HYPOTHESIS: Micromotor and nanomotor particles are typically made using dense solid particles that can sediment or be trapped in confined flow environments. Creation of much larger motors should be possible if a very low-density system is used with sufficient strength to carry liquid and still experience propulsive motion. Light, dense millimotors should also be able to deform more than dense solid ones in constrictions. EXPERIMENTS: Millimotors are created from permeable capsules of bacterial cellulose that are coated with catalse-containing metal-organic frameworks, enabling reactive propulsion in aqueous hydrogen peroxide. The motion of the motors is quantified using particle tracking and the deformation is measured using microcapillary compression and flow through confined channels. FINDINGS: Two different propulsion mechanisms are dominant depending on the motor surface chemistry: oxygen bubbles are expelled from hydrophilic millimotors, driving motion via recoil force and buoyancy. Hydrophobic millimotors remain attached to growing bubbles and move by buoyancy alone. Despite their large size, the low-density capsules compress to pass through contractions that would impede and be blocked by solid motors. The sparse structure but relatively large size of the motors enables them to transport significant volumes of liquid using minimal solid mass as a motor support structure.

A comparative study of audiology and cone beam computed tomography in TMD patients with otological symptoms through occlusal splint therapy.

INTRODUCTION: To investigate the changes of audiological tests and the cone beam computed tomography (CBCT) measurements of temporomandibular joint (TMJ) and middle-inner ear structure after occlusal splint therapy in temporomandibular disorders (TMD) patients with otological symptoms, and explore the etiological mechanism between TMD and otological symptoms. METHODS: The 25 subjects aged 18 to 40 years who diagnosed with TMD combined the otological symptoms enrolled in the study.They all had received orthodontic treatment in the outpatient clinic of the orthodontic department in Beijing Stomatological Hospital. All the subjects underwent the audiological tests of pure tone audiometry (PTA) and CBCT before and after the occlusal splint therapy. RESULTS: After the stabilization occlusal splint therapy, subjects with improvement or complete remission in TMD and otological symptoms accounted for 84% and 80% in all subjects respectively. There were statistically differences in the distances between condylar center (CoC) and sella (S) in sagittal and vertical directions before and after treatment, and statistically difference between ATM and S in sagittal direction. The threshold of PTA at 8000Hz were negatively correlated with the sagittal displacement of condyle and positively correlated with the coronal displacement of condyle. The thickness of top 1/3 of anterior wall of tympanum in sagittal were positively correlated with the threshold of PTA at 4000Hz. CONCLUSION: The changes in the TMJ position through occlusal splint therapy might cause the changes in structure of middle-inner ear, which might be one of the reasons for the improvement in otological symptoms. KEY WORDS: Audiology, CBCT, Otological symptoms, TMD.

Nanobiohybrids: Materials approaches for bioaugmentation.

Nanobiohybrids, synthesized by integrating functional nanomaterials with living systems, have emerged as an exciting branch of research at the interface of materials engineering and biological science. Nanobiohybrids use synthetic nanomaterials to impart organisms with emergent properties outside their scope of evolution. Consequently, they endow new or augmented properties that are either innate or exogenous, such as enhanced tolerance against stress, programmed metabolism and proliferation, artificial photosynthesis, or conductivity. Advances in new materials design and processing technologies made it possible to tailor the physicochemical properties of the nanomaterials coupled with the biological systems. To date, many different types of nanomaterials have been integrated with various biological systems from simple biomolecules to complex multicellular organisms. Here, we provide a critical overview of recent developments of nanobiohybrids that enable new or augmented biological functions that show promise in high-tech applications across many disciplines, including energy harvesting, biocatalysis, biosensing, medicine, and robotics.

Study of low-modulus biomedical ß Ti-Nb-Zr alloys based on single-crystal elastic constants modeling.

CALPHAD-type modeling was used to describe the single-crystal elastic constants of the bcc solution phase in the ternary Ti-Nb-Zr system. The parameters in the model were evaluated based on the available experimental data and first-principle calculations. The composition-elastic properties of the full compositions were predicted and the results were in good agreement with the experimental data. It is found that the ß phase can be divided into two regions which are separated by a critical dynamical stability composition line. The corresponding valence electron number per atom and the polycrystalline Young׳s modulus of the critical compositions are 4.04-4.17 and 30-40GPa respectively. Orientation dependencies of single-crystal Young׳s modulus show strong elastic anisotropy on the Ti-rich side. Alloys compositions with a Young׳s modulus along the <100> direction matching that of bone were found. The current results present an effective strategy for designing low modulus biomedical alloys using computational modeling.