Impact of Polyethylenimine Conjugation Mode on the Cell Transfection Efficiency of Silica Nanovectors.

The conjugation of polyethylenimine (PEI) to silica nanoparticles has emerged as a useful strategy in gene delivery. Here we investigate the influence of the PEI conjugation mode on the transfection ability of plain silica nanoparticles. Surface functionalization with sulfonate- and chloride-bearing silanes modulates the amount and conformation of PEI and therefore the particles' affinity for the plasmid, without impacting on cytotoxicity. However, transfection efficiency in both immortalized and primary cells is more directly correlated to the nature and strength of the particle-PEI interactions. It suggests that PEI detachment from the particle surface at the stage of endosomal escape is a key event in the plasmid delivery process. These data should provide fruitful guidelines for the fine tuning of colloidal surfaces intended for intracellular delivery of bioactive molecules.

Role of Physico-Chemical and Cellular Conditions on the Bone Repair Potential of Plastically Compressed Collagen Hydrogels.

Since their first description nearly 20 years ago, dense collagen hydrogels obtained by plastic compression have become popular scaffolds in tissue engineering. In particular, when seeded with dental pulp stem cells, they have demonstrated a great in vivo potential in cranial bone repair. Here, we investigated how physico-chemical and cell-seeding conditions could influence the formation and in vitro mineralization of these cellularized scaffolds. A qualitative assessment demonstrated that the gel stability before and after compression was highly sensitive to the conditions of fibrillogenesis, especially initial acid acetic and buffer concentrations. Gels with similar rheological properties but different fibrillar structures that exhibited different stabilities when used for the 3D culture of Stem cells from Human Exfoliated Deciduous teeth (SHEDs) could be prepared. Finally, in our optimal physico-chemical conditions, mineralization could be achieved only using human dental pulp stem cells (hDPSCs) at a high cell density. These results highlight the key role of fibrillogenic conditions and cell type/density on the bone repair potential of cell-laden plastically compressed collagen hydrogels.

Silicon impacts collagen remodelling and mineralization by human dental pulp stem cells in 3D pulp-like matrices.

OBJECTIVES: Silicon-releasing biomaterials are widely used in the field of dentistry. However, unlike bone, very little is known about the role of silicon on dental tissue formation and repair. This study investigates the influence of silicic acid on the survival, differentiation and mineralizing ability of human dental pulp stem cells (hDPSCs) in 3D pulp-like environments METHODS: Dense type I collagen hydrogels seeded with hDPSCs were cultured over 4 weeks in the presence of silicic acid at physiological (10 µM) and supraphysiological (100 µM) concentrations. Cell viability and proliferation were studied by Alamar Blue and live/dead staining. The collagen network was investigated using second harmonic generation imaging. Mineral deposition was monitored by histology and scanning electron microscopy. Gene expression of mineralization- and matrix remodeling-associated proteins was studied by qPCR. RESULTS: Presence of silicic acid did not show any significant influence on cell survival, metabolic activity and gene expression of key mineralization-related proteins (ALP, OCN, BSP). However, it induced enhanced cell clustering and delayed expression of matrix remodeling-associated proteins (MMP13, Col I). OPN expression and mineral deposition were inhibited at 100 µM. It could be inferred that silicic acid has no direct cellular effect but rather interacts with the collagen network, leading to a modification of the cell-matrix interface. SIGNIFICANCE: Our results offer advanced insights on the possible role of silicic acid, as released by pulp capping calcium silicates biomaterials, in reparative dentine formation. More globally, these results interrogate the possible role of Si in pulp pathophysiology.

Nanostructured Dense Collagen-Polyester Composite Hydrogels as Amphiphilic Platforms for Drug Delivery.

Associating collagen with biodegradable hydrophobic polyesters constitutes a promising method for the design of medicated biomaterials. Current collagen-polyester composite hydrogels consisting of pre-formed polymeric particles encapsulated within a low concentrated collagen hydrogel suffer from poor physical properties and low drug loading. Herein, an amphiphilic composite platform associating dense collagen hydrogels and up to 50 wt% polyesters with different hydrophobicity and chain length is developed. An original method of fabrication is disclosed based on in situ nanoprecipitation of polyesters impregnated in a pre-formed 3D dense collagen network. Composites made of poly(lactic-co-glycolic acid) (PLGA) and poly(lactic acid) (PLA) but not polycaprolactone (PCL) exhibit improved mechanical properties compared to those of pure collagen dense hydrogels while keeping a high degree of hydration. Release kinetics of spironolactone, a lipophilic steroid used as a drug model, can be tuned over one month. No cytotoxicity of the composites is observed on fibroblasts and keratinocytes. Unlike the incorporation of pre-formed particles, the new process allows for both improved physical properties of collagen hydrogels and controlled drug delivery. The ease of fabrication, wide range of accessible compositions, and positive preliminary safety evaluations of these collagen-polyesters will favor their translation into clinics in wide areas such as drug delivery and tissue engineering.

Baicalein-modified hydroxyapatite nanoparticles and coatings with antibacterial and antioxidant properties.

Aseptic loosening and bacterial infections are the two main causes of failure for metallic implants used for joint replacement. A coating that is both bioactive and possesses antimicrobial properties may address such shortcomings and improve the performance of the implant. We have sought to study the properties of combining hydroxyapatite-based nanoparticles or coatings with baicalein, a plant-extracted molecule with both antibacterial and antioxidant properties. (B-type) carbonated hydroxyapatite nanoparticles prepared by a chemical wet method could subsequently adsorbed by soaking in a baicalein solution. The amount of adsorbed baicalein was determined to be 63 mg.g-1 by thermogravimetric measurements. In a second approach, baicalein was adsorbed on a biomimetic calcium-deficient hydroxyapatite planar coating (12 µm thick) deposited on Ti6Al4V alloy from an aqueous solution of calcium, phosphate, sodium and magnesium salts. Soaking of the hydroxyapatite coated on titanium alloy in a baicalein solution induced partial dissolution/remodeling of the upper surface of the coating. However, the observed remodeling of the surface was much more pronounced in the presence of a baicalein solution, compared to pure water. The presence of adsorbed baicalein on the HAp layer, although it could not be precisely quantified, was assessed by XPS and fluorescence analysis. Planar coatings exhibited significant antibacterial properties against Staphylococcus epidermidis. Baicalein-modified nanoparticles exhibited significant antioxidant properties. These results illustrate the potential of hydroxyapatite used as a carrier for natural biologically-active molecules and also discuss the challenges associated with their applications as antibacterial agents.

Differentiation of neural-type cells on multi-scale ordered collagen-silica bionanocomposites.

Cells respond to biophysical and biochemical signals. We developed a composite filament from collagen and silica particles modified to interact with collagen and/or present a laminin epitope (IKVAV) crucial for cell-matrix adhesion and signal transduction. This combines scaffolding and signaling and shows that local tuning of collagen organization enhances cell differentiation.

USPIO-PEG nanoparticles functionalized with a highly specific collagen-binding peptide: a step towards MRI diagnosis of fibrosis.

Fibrosis is characterized by a pathologic deposition of collagen I, leading to impaired function of organs. Tissue biopsy is the gold standard method for the diagnosis of fibrosis but this is an invasive procedure, subject to sampling errors. Several non-invasive techniques such as magnetic resonance imaging (MRI) using non-specific probes have been developed but they are not fully satisfying as they allow diagnosis at a late stage. In this study, collagelin, a collagen-binding peptide has been covalently linked using click chemistry to pegylated Ultra Small Super Paramagnetic Iron Oxide Nanoparticles (USPIO-PO-PEG-collagelin NPs) with the aim of diagnosing fibrosis at an early stage by MRI. USPIO-PO-PEG-collagelin NPs showed a high affinity for collagen I, two times higher than that of free collagelin whereas not peptide labeled USPIO NPs (USPIO-PO-PEG-yne) did not present any affinity. NPs were not toxic for macrophages and fibroblasts. Diffusion through collagen hydrogels concentrated at 3 and 10 mg mL-1 revealed a large accumulation of USPIO-PO-PEG-collagelin NPs within the collagen network after 72 hours, ca. 3 times larger than that of unlabeled USPIO, thereby evidencing the specific targeting of collagen I. Moreover, the quantity of USPIO-PO-PEG-collagelin NPs accumulated within hydrogels was proportional to the collagen concentration. Subsequently, the NPs diffusion through collagen hydrogels was monitored by MRI. The MRI T2 time relaxation decreased much more significantly with depth for USPIO-PO-PEG-collagelin NPs compared to unlabeled ones. Taken together, these results show that USPIO-PEG-collagelin NPs are promising as effective MRI nanotracers for molecular imaging of fibrosis at an early stage.

Bi-layered silane-TiO2/collagen coating to control biodegradation and biointegration of Mg alloys.

Magnesium alloys have shown high potential as biodegradable implants for bone repair applications. However, their fast degradation in physiological media demands tuning their corrosion rate to accompany the natural tissue healing processes. Here, a new bi-layered silane-TiO2/collagen coating efficient in stabilizing and biofunctionalizing the surface of AZ31 and ZE41 Mg alloys is presented. Corrosion tests performed in cell culture medium over 7 weeks showed that the bi-layered coating promotes the formation of a stable layer of Mg(OH)2/MgCO3/CaCO3 that provides effective protection to the alloys at advanced immersion stages. The intrinsic reactivity of each alloy plus formation of transitory calcium phosphate phases, resulted in distinct corrosion behavior in the short term. Cell experiments showed that the bi-layered coating improved osteoblasts and fibroblasts proliferation compared to bare and silane-TiO2-coated alloys. Different responses in terms of cell adhesion could be related to the intrinsic corrosion rate of each alloy and some toxicity from the alloying elements. The results evidenced the complex interplay between alloy nature, coating-alloy combination and cell type. The silane-TiO2/collagen coating showed to be a promising strategy to improve cell response and viability and to control degradation rate of Mg alloys in the long term.

Priming Dental Pulp Stem Cells from Human Exfoliated Deciduous Teeth with Fibroblast Growth Factor-2 Enhances Mineralization Within Tissue-Engineered Constructs Implanted in Craniofacial Bone Defects.

The craniofacial area is prone to trauma or pathologies often resulting in large bone damages. One potential treatment option is the grafting of a tissue-engineered construct seeded with adult mesenchymal stem cells (MSCs). The dental pulp appears as a relevant source of MSCs, as dental pulp stem cells display strong osteogenic properties and are efficient at bone formation and repair. Fibroblast growth factor-2 (FGF-2) and/or hypoxia primings were shown to boost the angiogenesis potential of dental pulp stem cells from human exfoliated deciduous teeth (SHED). Based on these findings, we hypothesized here that these primings would also improve bone formation in the context of craniofacial bone repair. We found that both hypoxic and FGF-2 primings enhanced SHED proliferation and osteogenic differentiation into plastically compressed collagen hydrogels, with a much stronger effect observed with the FGF-2 priming. After implantation in immunodeficient mice, the tissue-engineered constructs seeded with FGF-2 primed SHED mediated faster intramembranous bone formation into critical size calvarial defects than the other groups (no priming and hypoxia priming). The results of this study highlight the interest of FGF-2 priming in tissue engineering for craniofacial bone repair. Stem Cells Translational Medicine 2019;8:844&857.

Fibroblast populated dense collagen matrices: cell migration, cell density and metalloproteinases expression.

Dense collagen matrices obtained by using the property of type I collagen to form liquid crystals at high concentrations, were shown to be colonized by human dermal fibroblasts (Biomaterials 23 (2002) 27). In order to evaluate them as possible tissue substitutes, we investigated in this study the mechanism of cell colonization. Fibroblasts were seeded at the surface of collagen matrices at concentrations of 5 and 40 b mg/ml. Cell density and migration were estimated from histological sections over 28 days within 500 microm thick matrices. At day 14, migration started in the 40 mg/ml matrices, attaining 320 microm in distance and 5500 cell/mm(3) in density at day 28. As zymography and western blot techniques demonstrated production of collagenase 1 (MMP1) and gelatinase A (MMP2) in culture medium, collagen hydrolysis was required for cells to penetrate the collagen network. Furthermore, the presence of MMP1 and MMP2 and their tissue inhibitors TIMP1 and TIMP2 was revealed by immunohistochemistry. We presently show that 40 mg/ml collagen matrices are colonized by human dermal fibroblasts and reach, at day 28, a density close to that measured in human dermis.

Collagen-silica hybrid materials: sodium silicate and sodium chloride effects on type I collagen fibrillogenesis.

Collagen-silica hybrid materials have been considered for potential biomedical applications. Understanding of the collagen-silica interactions is the key to control hybrids structure and properties. For this purpose, the effect of sodium silicate and sodium chloride addition at two concentrations, 0.83 and 10 mM, on the kinetic of the type I collagen fibrillogenesis at 20 degrees C, and pH 7.4 were studied. Absorbance profiles of fibrillogenesis experiments were collected together with measures of silicic acid concentration and transmission electron microscopy analysis. The specific effect of silica addition on the collagen fibrils self-assembly mechanisms was demonstrated by comparison with the sodium chloride. Sodium silicate at 10 mM inhibited the collagen fibrillogenesis. At the same concentration, the sodium chloride decreased the rate of the collagen fibril assembly. Collagen fibrillogenesis kinetic was not significantly disturbed by the presence of 0.83 mM of sodium chloride. However, the same concentration of sodium silicate modified the collagen fibrillogenesis kinetic. Transmission electron microscopy indicated for experiment with 0.83 mM of sodium silicate, the formation of longer and wider fibrils than for the equivalent collagen fibrillogenesis experiment with sodium chloride. The effect of sodium chloride is explained in terms of osmotic exclusion and influence on electrostatic interactions between collagen fibrils. The specific involvement of silicic acid in collagen helices hydrogen-bond interactions is suggested. Finally, the results of this study are discussed regarding the preparation of composites by co-gelation of type I collagen and sodium silicate, for potential application as bone repair device.

Recent advances in biomaterials for tissue engineering and controlled drug delivery.

In this review, recent advances in biomaterials developed to favor tissue repair are presented. The focus is particularly on devices used to promote bone repair, skin wound healing and nerve regeneration. In each case, the specifications for an ideal substitute and the recent advances in the field of these biomaterials are presented. Alternatively, drug delivery systems associated with biomaterials have been developed over the recent decades to stimulate wound healing without any side effects. For this purpose, the overview presents recent advances in medicated dressings for controlled release of antibiotic to prevent infections, growth factors to promote tissue regeneration and gene delivery to modulate cell phenotype.

Evaluation of dense collagen matrices as medicated wound dressing for the treatment of cutaneous chronic wounds.

Cutaneous chronic wounds are characterized by an impaired wound healing which may lead to infection and amputation. When current treatments are not effective enough, the application of wound dressings is required. To date, no ideal biomaterial is available. In this study, highly dense collagen matrices have been evaluated as novel medicated wound dressings for the treatment of chronic wounds. For this purpose, the structure, mechanical properties, swelling ability and in vivo stability of matrices concentrated from 5 to 40 mg mL(-1) were tested. The matrix stiffness increased with the collagen concentration and was associated with the fibril density and thickness. Increased collagen concentration also enhanced the material resistance against accelerated digestion by collagenase. After subcutaneous implantation in rats, dense collagen matrices exhibited high stability without any degradation after 15 days. The absence of macrophages and neutrophils evidenced their biocompatibility. Subsequently, dense matrices at 40 mg mL(-1) were evaluated as drug delivery system for ampicillin release. More concentrated matrices exhibited the best swelling abilities and could absorb 20 times their dry weight in water, allowing for an efficient antibiotic loading from their dried form. They released efficient doses of antibiotics that inhibited the bacterial growth of Staphylococcus Aureus over 3 days. In parallel, they show no cytotoxicity towards human fibroblasts. These results show that dense collagen matrices are promising materials to develop medicated wound dressings for the treatment of chronic wounds.

Transfection of macrophages by collagen hollow spheres loaded with polyplexes: a step towards modulating inflammation.

Macrophages are key orchestrators of inflammation as they secrete proteases and inflammatory cytokines. To date, therapies aimed at modulating macrophage phenotype have failed due to the short half-life of biomolecules in the body. Therefore, inhibition of inflammation by gene therapy constitutes a new hope. In the present study, we have assessed collagen hollow spheres as a reservoir system for polyplexes in order to transfect human macrophages while preserving cell viability. Polyplexes were formed by complexing G-Luc plasmid with a poly(2-dimethylaminoethyl methacrylate) poly(ethylene glycol) based hyperbranched polymer. Several ratios of polymer/pDNA (5:1, 8:1, 10:1w/w) complexes in two different sphere sizes (1.24 and 4.5µm) were tested. Collagen hollow spheres were loaded with polyplexes up to 80µg of pDNA per mg of microspheres. The release of polyplexes from the spheres was delayed and prolonged i.e. 20% of the initial amount released in 5days. Following incubation with polyplex-loaded microspheres, macrophages were transfected (polyplex pDNA:polymer ratio 1:10w/w). In addition, collagen hollow spheres maintained cell viability as more than 80% of cells were viable after 4days in culture. In contrast, when used alone, polyplexes were seen to be toxic, while there was no transfection detected. Taken together, these results show that collagen hollow spheres may be used as a reservoir for controlled gene delivery to macrophages. Unlike existing gene delivery systems, this system allows for macrophage transfection with minimal toxicity. Hence, this system has a potential for the delivery of a therapeutic gene in order to modulate inflammation.

In vitro studies and preliminary in vivo evaluation of silicified concentrated collagen hydrogels.

Hybrid and nanocomposite silica-collagen materials derived from concentrated collagen hydrogels were evaluated in vitro and in vivo to establish their potentialities for biological dressings. Silicification significantly improved the mechanical and thermal stability of the collagen network within the hybrid systems. Nanocomposites were found to favor the metabolic activity of immobilized human dermal fibroblasts while decreasing the hydrogel contraction. Cell adhesion experiments suggested that in vitro cell behavior was dictated by mechanical properties and surface structure of the scaffold. First-to-date in vivo implantation of bulk hydrogels in subcutaneous sites of rats was performed over the vascular inflammatory period. These materials were colonized and vascularized without inducing strong inflammatory response. These data raise reasonable hope for the future application of silica-collagen biomaterials as biological dressings.

Collagen supramolecular and suprafibrillar organizations on osteoblasts long-term behavior: benefits for bone healing materials.

This study compares the behavior of osteoblastic cells seeded on three structurally distinct collagen-based materials. Adhesion and long-term behavior were evaluated in vitro in regard to collagen scaffolds forming loose or dense fibrillar networks or exempt of fibrils. In this purpose collagen solutions at concentrations of 5 and 40 mg/mL were processed by freeze-drying or by sol/gel fibrillogenesis to form either sponges or hydrogels. Macroscopic and microscopic images of sponges showed a light material exhibiting large pores surrounded by dense collagen walls made of thin unstriated microfibrils of 20 nm in diameter. In comparison collagen hydrogels are more homogeneous materials, at 5 mg/mL the material consists of a regular network of cross-striated collagen fibrils of 100 nm in diameter. At 40 mg/mL the material appears stiffer, the ultrastructure exhibits cross-striated collagen fibrils packed in large bundles of 300-800 nm of width. Human osteoblastic cells seeded on top of the 5 mg/mL matrices exhibit a squared shaped osteoblast-like morphology over 28 days of culture and express both alkaline phosphatase and osteocalcin. Osteoblastic cells seeded on top of sponges or of 40 mg/mL matrices exhibit both flat and elongated resting-osteoblast morphology. Osteoblastic cells have mineralized the three collagen-based materials after 28 days of culture but collagen sponges spontaneously mineralized in absence of cells. These results highlight, in an in vitro cell culture approach, the benefit of fibrils and of dense fibrillar networks close to in vivo-like tissues, as positive criteria for new bone tissue repair materials.

Silica-collagen bionanocomposites as three-dimensional scaffolds for fibroblast immobilization.

Silica-collagen bionanocomposite hydrogels were obtained by addition of silica nanoparticles to a protein suspension followed by neutralization. Electron microscopy studies indicated that larger silica nanoparticles (80 nm) do not interact strongly with collagen, whereas smaller ones (12 nm) form rosaries along the protein fibers. However, the composite network structurally evolved with time due to the contraction of the cells and the dissolution of the silica nanoparticles. When compared to classical collagen hydrogels, these bionanocomposite materials showed lower surface contraction in the short term (1 week) and higher viability of entrapped cells in the long term (3 weeks). A low level of gelatinase MMP2 enzyme expression was also found after this period. Several proteins involved in the catabolic and anabolic activity of the cells could also be observed by immunodetection techniques. All these data suggest that the bionanocomposite matrices constitute a suitable environment for fibroblast adhesion, proliferation and biological activity and therefore constitute an original three-dimensional environment for in vitro cell culture and in vivo applications, in particular as biological dressings.

Concentrated collagen hydrogels as dermal substitutes.

Collagen hydrogels first appeared promising for skin repair. Unfortunately, their extensive contraction and their poor mechanical properties constituted major disadvantages toward their utilization as permanent graft. The present study has investigated a way to correct these drawbacks by increasing the collagen concentration in controlled conditions. Concentrated collagen hydrogels (CCH) at 1.5, 3 and 5mg/ml were obtained. The effect of raised collagen concentration on contraction, cell growth and remodeling activities was evaluated for 21 days in culture. Subsequently, in vivo integration of CCH and normal collagen hydrogels (NCH) was assessed. Compared to NCH, CCH contraction was delayed and smaller. At day 21, surface area of CCH at 3mg/ml was 18 times more important than that of NCH. Whatever the initial fibroblast density, CCH favored cell growth that reached about 10 times the initial cell number at day 21; cell proliferation was inhibited in NCH. Gelatinase A activities appeared lower in CCH than within NCH. In vivo studies in rats revealed a complete hydrolysis of NCH 15 days after implantation. In contrast, CCH at 3mg/ml was still present after 30 days. Moreover, CCH showed cell colonization, neovascularization and no severe inflammatory response. Our results demonstrate that concentrated collagen hydrogels can be considered as new candidates for dermal substitution because they are is easy to handle, do not contract drastically, favor cell growth, and can be quickly integrated in vivo.