The cytotoxic and oxidative effects of restorative materials in cultured human gingival fibroblasts.

The aim of this study was to evaluate the cytotoxic and oxidative effects of the most commonly used dental restorative materials on human gingival fibroblast cells (HGFCs). HGFCs were obtained from healthy individuals. The tested restorative materials were a microhybrid resin based composite, a compomer resin, a glass ionomer cement, and an amalgam alloy. One hundred eight cylindirical samples, 10 mm in diameter and 2 mm in height, were prepared according to ISO 10993-12:2002 specifications (n = 9 in the tested subgroups). Freshly prepared and aged samples in artificial saliva at 37 °C (7 and 21 d) were placed into well plates and incubated. Wells without dental materials were constituted as the control group. After 72 h incubation period, cytotoxicity was determined using the neutral red (NR) assay. Oxidative alterations were assessed using total antioxidant capacity (TAC) and total oxidant status (TOS) assay kits. Data were analyzed using the ANOVA and LSD post hoc tests. All tested materials led to significant decreases in the cell viability rates (33-73%) compared to the control group. Glass ionomer and resin composite were found to be more cytotoxic than amalgam alloy and compomer. The highest TAC level was observed in glass ionomer after seven-day aging and these changes prevented an increase in TOS levels. Increases in TAC levels after seven-day aging in all groups exhibited significant differences with freshly prepared samples (p < 0.05). In all material groups, TOS levels of freshly prepared samples differed statistically and significantly from samples aged for 7 and 21 d (p < 0.05). The data obtained suggested that all the tested materials exhibited cytotoxic and pro-oxidant features. Freshly prepared samples caused higher TOS levels. However, oxidant status induced by materials decreased over time.

Nifedipine-loaded polymeric nanoparticles: Preparation and in vitro characterization.

The purpose of the current study was to prepare nifedipine (NF) loaded-PLGA nanoparticles (NPs) using two different methods (nanoprecipitation method (N-2) and emulsion-solvent evaporation method (N-4)) to achieve the sustained release of NF and to reduce its side effects, and also to investigate the in vitro characteristics of NPs (surface morphology, particle size and size distribution, encapsulation efficiency and in vitro release characteristics). SEM images of nanoparticles revealed their approximate spherical shape. The mean particle sizes of the prepared nanoparticles ranged from 294.27±7.93 to 424.92±4.96 nm with almost neutral zeta potential values (close to 0 mV). The percent encapsulation efficiency values of N-2 and N-4 formulations 13.03±1.82% and 18.96±1.95% (p=0.05), respectively. The extents of cumulative drug release from N-2 and N-4 in PB pH 7.4 medium were up to about 100 % in 38 days and 22 days, respectively (when comparing two formulations, p<0.05). PLGA nanoparticles are useful systems for the sustained release of NF, and hence for reducing its side-effects and increasing patient compliance.

Cytotoxic and biological effects of bulk fill composites on rat cortical neuron cells.

The aim of this study was to investigate potential cellular responses and biological effects of new generation dental composites on cortical neuron cells in two different exposure times. The study group included five different bulk-fill flow able composites; Surefil SDR Flow, X-tra Base Flow, Venus Bulk Flow, Filtek Bulk Flow and Tetric-Evo Flow. They were filled in Teflon molds (Height: 4 mm, Width: 6 mm) and irradiated for 20 s. Cortical neuron cells were inoculated into 24-well plates. After 80% of the wells were coated, the 3 µm membrane was inserted and dental filling materials were added. The experiment was continued for 24 and 72 h. Cell viability measured by MTT assay test, total antioxidant and total oxidant status were examined using real assay diagnostic kits. The patterns of cell death (apoptosis) were analyzed using annexin V-FITC staining with flow cytometry. Β-defensins were quantitatively assessed by RT-PCR. IL-6, IL-8 and IL-10 cytokines were measured from the supernatants. All composites significantly affected analyses parameters during the exposure durations. Our data provide evidence that all dental materials tested are cytotoxic in acute phase and these effects are induced cellular death after different exposure periods. Significant cytotoxicity was detected in TE, XB, SS, FBF and VBF groups at 24 and 72 h, respectively.

In vitro evaluation of long-term cytotoxic response of injection-molded polyamide and polymethyle metacrylate denture base materials on primary fibroblast cell culture.

OBJECTIVE: This study investigated the long-term cytotoxic response of thermoplastic polyamide and conventional polymethyle metacrylate (PMMA) denture base materials. MATERIALS AND METHODS: Twenty discs were prepared for each polyamide, heat and cold cured PMMA denture base resins (totally 60) and divided into four sub-groups (n = 5). Cytotoxicity was assessed with the direct cell contact method using cell viability and neutral red (NR) uptake assay. Each sub-group was tested at initial and after being aged for 24 h, 1 week and 8 weeks with artificial saliva according to ISO 10993 standards. RESULTS: There were no significantly difference among the materials and control groups after initial, 24 h and 1 week testing. In 24 h testing, only Deflex was more toxic according to the Control group (p < 0.05). After 8 weeks of aging with artificial saliva, all materials were significantly cytotoxic when compared to the control group. QC20 was more toxic than Deflex and SC Cold Cure (p < 0.05). There were significant differences between the 8 week aging group and the initial, 24 h and 1 week testing for all materials (p < 0.05). CONCLUSIONS: Cytotoxicity of all tested denture base materials increased significantly after the long-term aging. Therefore, long-term aging may be useful to determine a dental material's toxicity. Polyamide denture base material had a similar toxicity profile with conventional heat- and cold-cured PMMA.

Preparation of core-shell magnetic molecularly imprinted polymers for extraction of patulin from juice samples.

In this study, a novel magnetic molecularly imprinted polymer (MMIP) was prepared by surface imprinting technology using 2-oxin and 6-HNA as dual virtual templates and 4-vinyl pyridine (4-VP) as the functional monomer for extraction of patulin (PAT) from the surface of magnetic nanoparticles. MMIPs were characterized by fourier transformed infrared (FT-IR) spectroscopy, X-ray diffraction, and vibrating sample magnetometry. The results showed that the molecularly imprinted polymer (MIP) was successfully coupled with magnetic nanoparticles and could be used as a magnetic selective recognition material. Moreover, MMIPs have a greater adsorption capacity for PAT than conventional MIPs. The magnetic dispersion solid-phase extraction procedure was optimized and then combined with liquid chromatography-tandem mass spectrometry (MDSPE-LC-MS/MS) for detection of PAT in juice samples. The method showed excellent analytical performance in terms of linearity (ranged between 0.5 µg L-1 and 100 µg L-1with correlation coefficients (r) higher than 0.999) and limit of detection (LOD) (0.1 µg L-1, S/N = 3). At three spiking concentrations (1, 10, and 50 µg L-1), the mean recoveries were ranged between 79.4% and 97.9% with relative standard deviations (RSDs) < 4.7% (n = 3).

Cadmium sulfide-induced toxicity in the cortex and cerebellum: In vitro and in vivo studies.

Living organisms have an innate ability to regulate the synthesis of inorganic materials, such as bones and teeth in humans. Cadmium sulfide (CdS) can be utilized as a quantum dot that functions as a unique light-emitting semiconductor nanocrystal. The increased use in CdS has led to an increased inhalation and ingestion rate of CdS by humans which requires a broader appreciation for the acute and chronic toxicity of CdS. We investigated the toxic effects of CdS on cerebellar cell cultures and rat brain. We employed a 'green synthesis' biosynthesis process to obtain biocompatible material that can be used in living organisms, such as Viridibacillus arenosi K64. Nanocrystal formation was initiated by adding CdCl2 (1 mM) to the cell cultures. Our in vitro results established that increased concentrations of CdS (0.1 µg/mL) lead to decreased cell viability as assessed using 3-[4,5-dimethylthiazole-2-yl]-2,5-diphenyltetrazolium bromide (MTT), total antioxidant capacity (TAC), and total oxidant status (TOS). The in vivo studies showed that exposure to CdS (1 mg/kg) glial fibrillary acidic protein (GFAP) and 8-hydroxy-2' -deoxyguanosine (8-OHdG) were increased. Collectively, we describe a model system that addresses the process from the synthesis to the neurotoxicity assessment for CdS both in vitro and in vivo. These data will be beneficial in establishing a more comprehensive pathway for the understanding of quantum dot-induced neurotoxicity.

Assessment of magnetic core-shell mesoporous molecularly imprinted polymers for selective recognition of triazoles residual levels in cucumber.

Functional magnetic nanomaterials based on molecular imprinting technique were successfully prepared on the surface of modified Fe3O4. Transmission electron microscopy (TEM), Fourier-transform infrared spectroscopy (FTIR), X-ray diffractometer, and vibrating sample magnetometry were applied for characterization of the synthesized magnetic nanoparticles. The magnetic molecularly imprinted polymers (MMIPs) exhibited satisfactory magnetic response, specific recognition, and excellent adsorption capacity toward triazoles (maximum adsorption capacity of 9202.9 µg g-1 for triadimefon). The obtained MMIPs were further used as magnetic dispersive solid-phase extraction (MDSPE) coupled with liquid chromatography-tandem mass spectrometry (LC-MS/MS) for detection of 20 triazoles in cucumber spiked at different levels. The mean recoveries were ranged from 79.9% to 110.3% and relative standard deviations (RSDs) were <11.2% (n = 5). Herein, we report a simple, rapid, environmentally friendly, and magnetic stuff recyclable approach for triazoles residual analysis in complicated agricultural products.

The determination of patulin from food samples using dual-dummy molecularly imprinted solid-phase extraction coupled with LC-MS/MS.

A molecularly imprinted polymer (MIP) with specific adsorption for patulin was successfully polymerized by precipitation polymerization using 2-oxindole (2-oxin) and 6-hydroxynicotinic acid (6-HNA) as dummy template molecules, methylacrylic acid (MAA) as a functional monomer, trimethylolpropane trimethacrylate (TRIM) as a crosslinker, 2,2-azobis-(2-methylpropionitrile) (AIBN) as a initiator, and methanol as a porogen solvent. The molecularly imprinted solid phase extraction (MI-SPE) column was prepared using the polymer as a sorbent and applied for the selective extraction of patulin from real samples. The results showed that the MI-SPE method had high selectivity and specific adsorption towards patulin with mean recoveries ranged between 81.3% and 106.3% and a relative standard deviation (RSD) < 4.5%. Additionally, the developed MI-SPE method coupled with liquid chromatography-tandem mass spectrometry (LC-MS/MS) exhibited good linearity in the range of 1-100 ng mL-1 with correlation coefficients (R2) >0.998. The limits of detection (LODs, S/N = 3) were 0.05-0.2 ng g-1, and the limits of quantification (LOQs, S/N = 10) were 0.2-0.5 ng g-1. The developed method showed a better purification and higher patulin recovery for real samples than the quick, easy, cheap, effective, rugged, safe "QuEChERS" method.

Effect of metformin/irinotecan-loaded poly-lactic-co-glycolic acid nanoparticles on glioblastoma: in vitro and in vivo studies.

AIM: The present study was designed to evaluate the effects of irinotecan hydrochloride (IRI)- or metformin hydrochloride (MET)-loaded poly-lactic-co-glycolic acid (PLGA) nanoparticles (NPs) for the treatment of glioblastoma multiforme using in vitro neuron and U-87 MG glioblastoma cell cultures and in vivo animal model. METHODS: The cytotoxic and neurotoxic effects of pure drugs, blank NPs and MET- and IRI-loaded PLGA NPs were investigated in vitro (using methylthiazolyldiphenyl-tetrazolium bromide assay) and in vivo (using Cavalieri's principle for estimation of cancer volume). RESULTS: 1 and 2 mM doses of MET and MET-loaded PLGA NPs, respectively, significantly reduced the volume of extracted cancer. CONCLUSION: Consequently, MET- and IRI-loaded PLGA NPs may be a promising approach for the treatment of glioblastoma multiforme.