Recent Update on anaerobic digestion of paddy straw for biogas production: Advancement, limitation and recommendations.

At present, development and production of advanced green energy sources are highly demanded, and this may offer a clean and sustainable environment to our modern society. In this reference, biogas is emerging as a promising green energy source and seems to have high potential to replace fossil-fuel based energy sources in the coming future. Further, lignocellulosic biomass (LCB) based biogas production technology has been found to be highly promising owing to several advantages associated therewith. Rich inorganic content, renewable nature, huge availability and low-cost are the key beneficial factors of LCB-based feedstock l to produce biogas. Among the varieties of LCB, paddy straw is one of the most demanding feedstocks and is highly rich in organic compounds that are imperative to producing biogas. Nevertheless, it is noticed that paddy straw as a waste material is usually disposed-off by direct burning, whereas it exhibits low natural digestibility due to the presence of high lignin and silica content which causes severe environmental pollution. On the other hand, paddy straw can be a potential feedstock to produce biogas through anaerobic digestion. Therefore, based on the current ongoing research studies worldwide, this review evaluates the advancements made in the AD process. Meanwhile, existing limitations and future recommendations to improve the yield and productivity of the biogas using paddy straw have been discussed. The emphasis has also been given to various operational parameters developments, related shortcomings, and strategies to improve biogas production at pilot scale.

Production of Biodegradable Polymer from Agro-Wastes in Alcaligenes sp. and Pseudomonas sp.

The present study was aimed to evaluate the suitability of agro-wastes and crude vegetable oils for the cost-effective production of poly-ß-hydroxybutyrate (PHB), to evaluate growth kinetics and PHB production in Alcaligenes faecalis RZS4 and Pseudomonas sp. RZS1 with these carbon substrates and to study the biodegradation of PHB accumulated by these cultures. Alcaligenes faecalis RZS4 and Pseudomonas sp. RZS1 accumulates higher amounts of PHB corn (79.90% of dry cell mass) and rice straw (66.22% of dry cell mass) medium respectively. The kinetic model suggests that the Pseudomonas sp. RZS1 follows the Monod model more closely than A. faecalis RZS4. Both the cultures degrade their PHB extract under the influence of PHB depolymerase. Corn waste and rice straw appear as the best and cost-effective substrates for the sustainable production of PHB from Alcaligenes faecalis RZS4 and Pseudomonas sp. RZS1. The biopolymer accumulated by these organisms is biodegradable in nature. The agro-wastes and crude vegetable oils are good and low-cost sources of nutrients for the growth and production of PHB and other metabolites. Their use would lower the production cost of PHB and the low-cost production will reduce the sailing price of PHB-based products. This would promote the large-scale commercialization and popularization of PHB as an ecofriendly bioplastic/biopolymer.

A sensitive WST-8-based bioassay for PEGylated granulocyte colony stimulating factor using the NFS-60 cell line.

CONTEXT: Granulocyte colony stimulating factor (G-CSF) has been commonly used to treat neutropenia caused by chemotherapy, radiotherapy, and organ transplants. Improved in vitro efficacy of G-CSF has already been observed by conjugating it to polyethylene glycol (PEG). OBJECTIVE: The in vivo bioassay using tetrazolium dye with the NFS-60 cell line has been recommended for G-CSF but no such monographs are available for PEGylated G-CSF in pharmacopeias. In the present study, the assay recommended for G-CSF was evaluated for its suitability to PEGylated G-CSF. MATERIALS AND METHODS: The generally used MTS [3-(4,5-dimethylthiazol-2-yl)-5-(3-carboxymethoxyphenyl)-2-(4-sulfophenyl)-2H-tetrazolium]-based assay was compared with a bioassay employing a water-soluble tetrazolium dye, WST-8 [2-(2-methoxy-4-nitrophenyl)-3-(4-nitrophenyl)-5-(2,4-disulfophenyl)-2H-tetrazolium], using NFS-60 cells at a concentration of 7 × 10(5) cells/ml against 800 IU/ml of PEGylated G-CSF at 24, 48, 72, and 72 h time points to determine the efficacy of PEGylated G-CSF. Further, the optimized WST-8 dye-based assay was used to test the potency of various commercially available PEGylated G-CSF preparations. RESULTS: The results demonstrated enhanced sensitivity of the WST-8-based assay over the conventional MTS-based assay for determining the potency of PEGylated G-CSF using the NFS-60 cell line. CONCLUSION: Our study demonstrates the potential application of WST-8-based bioassays for other biotherapeutic proteins of human and veterinary interest.

Production, optimization, scale up and characterization of polyhydoxyalkanoates copolymers utilizing dairy processing waste.

The microbial biotransformation using low-cost feedstock to produce biopolymers (degradable), an alternative to petrochemical-based synthesis plastics (non-degradable), can be a beneficial approach towards sustainable development. In this study, the dairy industry processes waste (whey) is used in polyhydroxyalkanoate (PHA) copolymer production. Initial screening suggested that Ralstonia eutropha produced higher PHA as compared to Bacillus megaterium. A central composite rotatable design-based optimization using two process variables (amino acid and tween-80) concentration remarkably influenced PHA co-polymer production under physiological conditions of pH (7), temperature (37 °C), and agitation rate of 150 rpm. High polyhydroxybutyrate (PHB) mass fraction yield of 69.3% was observed as compared to predicted yield of 62.8% from deproteinized whey as feed. The combination of tryptophan (50 mg L-1) and tween-80 (3 mL-1) enhanced R. eutropha mass gain to 6.80 g L-1 with PHB contents of 4.71 g L-1. Further, characterization of PHA and its copolymers was done by ESI-MS, FTIR, and TEM. On upscaling up to 3.0 L, the PHA contents and yields were noted as quite similar by R. eutropha. This study demonstrates that dairy waste processing waste can be potentially utilized as inexpensive feed for producing high content of biopolymers to develop a sustainable system of waste management.

Knowledge and Perception of Orthodontic Treatment among General and Non-Orthodontic Dental Specialists: A Comparative Study.

The objective of this study is to discover any possible association of gender or practitioner classification with orthodontic knowledge and attitudes towards orthodontic treatment. Descriptive cross-sectional research was conducted on two groups of dentists in the Ha'il region of Saudi Arabia. Group I included general practitioners, while Group II had non-orthodontic specialists. The findings suggest a statistically significant (p < 0.05) difference between the knowledge and attitudes of general practitioners and non-orthodontic specialists. Independent two tailed t-scores for difference in Knowledge (t-score = 3.19919, p = 0.003) and Attitude (t-score = 2.16314, p = 0.048319), highlight significant disparities in the knowledge and attitudes of general practitioners and non-orthodontic specialists. However, no statistically significant difference was observed in terms of knowledge and attitudes based on gender differences. This study captures and highlights subtle information that is very significant in dealing with critically important orthodontics issues. The study suggests that it is possible that a non-orthodontic specialist may suggest an altogether different line of treatment with different consequences when compared to a general practitioner and vice versa. This may result in unwanted, permanent orthodontic effects, highlighting the significance of the early stage of orthodontic treatment awareness. This research reveals disparities between the perceptions of general practitioners and non-orthodontic specialists about the stage and relevance of orthodontic treatment. It is strongly advised to see an orthodontic expert rather than a general practitioner or non-orthodontic specialist for orthodontic issues.

Impact of nanomaterials on sustainable pretreatment of lignocellulosic biomass for biofuels production: An advanced approach.

Biomass to biofuels production technology appears to be one of the most sustainable strategies among various renewable energy resources. Herein, pretreatment is an unavoidable and key step to increase free cellulose availability and digestibility to produce green fuels. Various existing pretreatment technologies of lignocellulosics biomasses (LCBs) face distinct challenges e.g., energy consuming, cost intensive, may lead partial removal of lignin, complex inhibitors production as well as may cause environmental pollutions. These, limitations may be overcome with the application of nanomaterials, employed as nanocatalysts during the pretreatment process of LCBs. In this prospect, the present review focuses and summarizes results of numerous studies and exploring the utilizations of magnetic, carbon based nanostructure, and nanophotocatalysts mediated pretreatment processes along with their possible mechanisms to improve the biofuels production compared to conventional chemical based pretreatment approaches. Furthermore, different aspects of nanomaterials based pretreatment methods with their shortcomings and future prospects have been discussed.

Improved production of biogas via microbial digestion of pressmud using CuO/Cu2O based nanocatalyst prepared from pressmud and sugarcane bagasse waste.

Biogas production through anaerobic digestions of organic wastes using microbes is a potential alternative to maintain the long term sustainability of the environment and also to full-fill the energy demands and waste management issues. In this context, pressmud can be a vital substrate which is generated from sugarcane industries and found to be broadly available. In this work, biogas improvement has been investigated in presence of CuO/Cu2O based nanocatalyst wherein pressmud is employed as a substrate in anaerobic digestion. Herein, CuO/Cu2O based nanocatalyst has been prepared using the aqueous extract prepared from the combination of PM and SCB which is employed as a reducing agent. The physicochemical properties of CuO/Cu2O nanocatalyst have been probed through different techniques and it is noticed that using 1.0 % CuO/Cu2O based nanocatalyst employed in AD process, cumulative biogas 224.7 mL CH4 /g VS could be recorded after 42 days.

Prospects of soil microbiome application for lignocellulosic biomass degradation: An overview.

Sustainable and practically viable biofuels production technology using lignocellulosic biomass is still seeking its way of implementation owing to some major issues involved therein. Unavailability of efficient microbial sources for the degradation of cellulosic biomass is one of the major roadblocks in biomass to biofuels production technology. In this context, utilization of microbiomes to degrade lignocellulaosic biomass is emerging as a rapid and effective approach that can fulfill the requirements of biomass based biofuels production technology. Therefore, the present review is targeted to explore soil metagenomic approach to improve the lignocellulosic biomass degradation processing for the cost-effective and eco-friendly application. Soil microbiomes consist of rich microbial community along with high probability of cellulolytic microbes, and can be identified by culture independent metagenomics method which can be structurally and functionally explored via genomic library. Therefore, in depth analysis and discussion have also been made via structural & functional metagenomics tools along with their contribution to genomic library. Additionally, the present review highlights currently existing bottlenecks along with their feasible solutions. This review will help to understand the basic research as well as industrial concept for the process improvement based on soil microbiome mediated lignocellulosic biomass degradation, and this may likely to implement for the low-cost commercial biofuels production technology.

Thermophilic biohydrogen production strategy using agro industrial wastes: Current update, challenges, and sustainable solutions.

Continuously increasing wastes management issues and the high demand of fuels to fulfill the current societal requirements is not satisfactory. In addition, severe environmental pollution caused by generated wastes and the massive consumption of fossil fuels are the main causes of global warming. In this scenario, production of hydrogen from organic wastes is a potential and one of the most feasible alternatives to resolve these issues. However, sensitivity of H2 production at higher temperature and lack of potential substrates are the main issues which are strongly associated with such kinds of biofuels. Therefore, the present review is targeted towards the evaluation and enhancement of thermophilic biohydrogen production using organic, cellulosic wastes as promising bioresources. This review discusses about the current status, development in the area of thermophilic biohydrogen production wherein organic wastes as key substrate are being employed. The combinations of suitable organic and cellulose rich substrates, thermo-tolerant microbes, high enzymes stability may support to enhance the biohydrogen production, significantly. Further, various factors which may significantly contribute to enhance biohydrogen production have been discussed thoroughly in reference to the thermophilic biohydrogen production technology. Additionally, existing obstacles such as unfavorable thermophilic biohydrogen pathways, inefficiency of thermophilic microbiomes, genetic modifications, enzymes stability have been discussed in context to the possible limitations of thermophilic biohydrogen production strategy. Structural and functional microbiome analysis, fermentation pathway modifications via genetic engineering and the application of nanotechnology to enhance the thermophilic biohydrogen production have been discussed as the future prospective.

Integrated biohydrogen production via lignocellulosic waste: Opportunity, challenges & future prospects.

Hydrogen production through biological route is the cleanest, renewable and potential way to sustainable energy generation. Productions of hydrogen via dark and photo fermentations are considered to be more sustainable and economical approach over numerous existing biological modes. Nevertheless, both the biological modes suffer from certain limitations like low yield and production rate, and because of these practical implementations are still far away. Therefore, the present review provides an assessment and feasibility of integrated biohydrogen production strategy by combining dark and photo-fermentation as an advanced biochemical processing while using lignocellulosics biomass to improve and accelerate the biohydrogen production technology in a sustainable manner. This review also evaluates practical viability of the integrated approach for biohydrogen production along with the analysis of the key factors which significantly influence to elevate this technology on commercial ground with the implementation of various environment friendly and innovative approaches.

Prioritization and characterization of validated biofilm blockers targeting glucosyltransferase C of Streptococcus mutans.

To date, several Glucosyltransferase C (GtfC) inhibitors have been identified and experimentally validated. All these inhibitors have been validated at different experimental conditions like degree of purity, animal models, kinetic conditions, experimental environment etc.; and most of these inhibitors (ligands) proved to be quite effective in their respective validation environment. However, due to varied experimental validation conditions, and absence of molecular interaction data, there is no way to prioritize these validated ligands for their inhibition potential against GtfC. The present study is a novel attempt of comparative evaluation of the interaction of the validated ligands on a single platform and under similar conditions with a dual objective, i.e. ligand prioritization for their respective inhibitory potential and elucidation of the involved unknown molecular interactions. Carbohydrate derivatives (6-Deoxy sucrose and Trichloro-galactosucrose) were identified as the most promising GtfC inhibitors. In addition, Asp588, Trp517, and Asn481 amino acid residues of the domain A1 proved vital for the inhibitory effect. The study highlights the importance of the comparative analysis of the validated ligands in order to identify the most promising leads for drug discovery against dental caries.

Technological advances for improving fungal cellulase production from fruit wastes for bioenergy application: A review.

Fruit wastes can be imperative to elevate economical biomass to biofuels production process at pilot scale. Because of the renewable features, huge availability, having low lignin content organic nature and low cost; these wastes can be of much interest for cellulase enzyme production. This review provides recent advances on the fungal cellulase production using fruit wastes as a potential substrate. Also, the availability of fruit wastes, generation and processing data and their potential applications for cellulase enzyme production have been discussed. Several aspects, including cellulase and its function, solid-state fermentation, process parameters, microbial source, and the application of enzyme in biofuels industries have also been discussed. Further, emphasis has been made on various bottlenecks and feasible approaches such as use of nanomaterials, co-culture, molecular techniques, genetic engineering, and cost economy analysis to develop a low-cost based comprehensive technology for viable production of cellulase and its application in biofuels production technology.

Strategies in the design of endosomolytic agents for facilitating endosomal escape in nanoparticles.

Nanoparticles (NPs) are one of the leading and promising technologies for gene and drug delivery. However, despite continuous advancements in the delivery of NPs, endosomal escape remains a major issue and a matter of grave concern for developing an efficient and targeted delivery system for therapeutic applications. Most of NPs generally follow endocytic pathway for internalization into the cells. Following the internalization process, NPs must escape into the cell cytoplasm for evading degradation by hydrolytic enzymes present in the lysosomes. Various types of lipids have been used in the past viz. fusogenic lipid dioleoylphosphatidylethanolamine (DOPE), pH-sensitive lipids, cationic lipid and multiple charges containing lipid to escape from endosomes. Recently, several novel polymers, pH-sensitive peptides, proteins and many others endosomolytic agents have been identified and developed for incorporating into gene and drug delivery system to facilitate endosomal escape. In this review, endosomal escape mechanisms of different types of NPs have been discussed in detail and compared with endosomal escape mechanisms of viruses and other synthetic gene delivery systems to escape from endosomes. Also, the designing of endosomolytic agents to facilitate endosomal escape based on different approaches and strategies is explored. Moreover, this review article highlights the recent advancements in the development of NPs equipped with endosomolytic agents including its future directions and applications in the field of nanomedicine.

Fast and efficient detection of tuberculosis antigens using liposome encapsulated secretory proteins of Mycobacterium tuberculosis.

PURPOSE: A rapid and efficient diagnostic test was developed for the detection of Mycobacterium tuberculosis antigens in serum samples of active tuberculosis (TB) and extrapulmonary TB patients via a liposomal agglutination-based method. METHODS: A rapid card test has been developed to facilitate the recognition of high-affinity binding rabbit raised purified culture filtrate protein antibodies coupled on the surface of activated liposomal preparation. In the presence of TB antigens, the polyclonal antibodies bound to the liposomal particles demonstrate a visible agglutination reaction. RESULTS: The developed assay was simple, rapid, reliable, sensitive, and specific as a diagnostic test for the detection of antigens in serum samples of clinically confirmed cases of TB within 4-5 minutes' duration. The test was evaluated at different hospitals, medical colleges, and pathology centers, and involved 1483 participants. This investigation was conducted to detect the presence of these antigens during the period of active growth of the microorganism in serum samples for pulmonary TB and processed tissue biopsy for other extrapulmonary TB. Results obtained using this test were compared with acid-fast bacilli smear and culture results. CONCLUSION: Our study demonstrated that the newly developed liposome tuberculosis antigen card test detected antigens in our study population with approximately 97.48% sensitivity and 95.79% specificity. This is the first study to report the liposomal encapsulation of culture filtrate proteins from M. tuberculosis for diagnostic application.

Efficient Purification of rhG-CSF and its PEGylated Forms and Evaluation for In Vitro Activities.

Granulocyte-colony stimulating factor (G-CSF) has commonly been used to help the patients to recover from neutropenia inflicted due to radiotherapy, organ transplants and chemotherapy. As the number of people undergoing these therapies and procedures are increasing world-wide, the need for more economical ways of G-CSF production and improvement in its efficacy has become increasingly crucial. In the present study, recombinant human G-CSF (rhG-CSF) was expressed in E. coli and its purification process was optimized by demonstrating better efficiency and higher recoveries (upto 54%) in a multi-step chromatographic purification process, which is greater than the existing reports. Additionally, the efficacy of rhG-CSF was increased by derivatizing with polyethylene glycol (PEG; upto 85% PEGylation), which increases the plasma clearance time, reduces the immunogenicity and requires less frequent administration to the patient. Overall, the present study suggests a cost-effective purification process of rhG-CSF and also proposes its efficient conjugation with PEG for enhanced efficacy as compared to the existing commercially available forms.