A reduction-sensitive carrier system using mesoporous silica nanospheres with biodegradable polyester as caps.

Mesoporous silica nanoparticles (MSN)-polymer hybrid combined with the aliphatic biodegradable polyester caps on the surface were first developed in order to manipulate the smart intracellular release of anticancer drugs. First, poly(ethylene glycol)-b-poly(ε-caprolactone) (PEG-PCL) was successfully grafted on the surface of MSN via disulfide bonds which could cleave under a reduction environment in tumor cells. The anticancer drug doxorubicin (DOX) was encapsulated into the particle pores. The in vitro drug release profile showed that DOX release was significantly restricted by the polymer caps at pH 7.4, while it was greatly accelerated upon the addition of GSH. Cytotoxicity evaluation showed good biocompatibility with the hybrid particles. Fast endocytosis and intracellular DOX release were observed by confocal laser scanning microscopy (CLSM). The DOX-loaded particles exhibited comparable antitumor activity with free DOX towards HeLa cells and showed in a time-dependent manner. This work developed an extensive method of utilizing aliphatic biodegradable polyesters as polymer caps for MSN to control drug delivery. The paper might offer a potential option for cancer therapy.

Fabrication of PLCL Block Polymer with Tunable Structure and Properties for Biomedical Application.

Biodegradable materials are pivotal in the biomedical field, where how to precisely control their structure and performance is critical for their translational application. In this study, poly(L-lactide-b-ε-caprolactone) block copolymers (bPLCL) with well-defined segment structure are obtained by a first synthesis of poly(ε-caprolactone) soft block, followed by ring opening polymerization of lactide to form poly(L-lactide acid)  hard block. The pre-polymerization allows for fabrication of bPLCL with the definite compositions of soft/hard segment while preserving the individual segment of their special soft or hard segment. These priorities make the bPLCL afford biodegradable polymer with better mechanical and biodegradable controllability than the random poly(L-lactide-co-ε-caprolactone) (rPLCL) synthesized via traditional one-pot polymerization. 10 mol% ε-caprolactone introduction can result in a formation of an elastic polymer with elongation at break of 286.15% ± 55.23%. Also, bPLCL preserves the unique crystalline structure of the soft and hard segments to present a more sustainable biodegradability than the rPLCL. The combinative merits make the pre-polymerization technique a promising strategy for a scalable production of PLCL materials for potential biomedical application.

A Versatile Disorder-to-Order Technology to Upgrade Polymers into High-Performance Bioinspired Materials.

Biodegradable polymer as traditional material has been widely used in the medical and tissue engineering fields, but there is a great limitation as to its inferior mechanical performance for repairing load-bearing tissues. Thus, it is highly desirable to develop a novel technology to fabricate high-performance biodegradable polymers. Herein, inspired by the bone's superstructure, a versatile disorder-to-order technology (VDOT) is proposed to manufacture a high-strength and high-elastic modulus stereo-composite self-reinforced polymer fiber. The mean tensile strength (336.1 MPa) and elastic modulus (4.1 GPa) of the self-reinforced polylactic acid (PLA) fiber are 5.2 and 2.1 times their counterparts of the traditional PLA fiber prepared by the existing spinning method. Moreover, the polymer fibers have the best ability of strength retention during degradation. Interestingly, the fiber tensile strength is even higher than those of bone (200 MPa) and some medical metals (e.g., Al and Mg). Based on all-polymeric raw materials, the VDOT endows bioinspired polymers with improved strength, elastic modulus, and degradation-controlled mechanical maintenance, making it a versatile update technology for the massive industrial production of high-performance biomedical polymers.

Micropatterned thermoresponsive surfaces by polymerization of monomer crystals: modulating cellular morphology and cell-substrate interactions.

A novel and facile approach has been developed to create thermoresponsive surfaces with macroscale patterns together with microscale features. The surface patterns were formed by applying macroscale nucleation agent patterns onto saturated N-isopropylacrylamide monomer solution membranes to induce the divergent growth of needlelike monomer crystals; the patterned monomer crystals were then photopolymerized to form patterned thermoresponsive films. A series of analytical tools (i.e., scanning electron microscopy, profilometry, and contact angle measurement) were used to characterize the properties of the patterned films. Cell coculture on this patterned thermoresponsive films enables cell separation and sorting by modulating temperature- and topography-dependent cell-substrate interactions and cell morphology, respectively. This versatile technique allows the formation of various macroscale patterns with microscale features over large areas, and on most solid substrates, within minutes, all of this without the need for expensive equipment and facilities. Such patterned surfaces can act as both in vitro tumor models and separation platforms for cancer studies. This method can also be applied to other cell-based biological studies and clinical applications.

Machine Learning Screening of Efficient Ionic Liquids for Targeted Cleavage of the ß-O-4 Bond of Lignin.

Lignin conversion into high value-added chemicals is of great significance for maximizing the use of renewable energy. Ionic liquids (ILs) have been widely used for targeted cleavage of the C-O bonds of lignin due to their high catalytic activity. Studying the cleavage activity of each IL is impossible and time-consuming, given the huge number of cations and anions. Currently, the mainstream approach to determining the cleavage activity of one IL is to calculate the activation barrier energy (Ea) theoretically via transition state search, a process that involves the iterative determination of an appropriate "imaginary frequency". Machine learning (ML) has been widely used for catalyst design and screening, enabling accurate mapping from specified descriptors to target properties. To avoid complicated Ea calculations and to screen potential candidates, in this study, we selected nearly 103 ILs and guaiacylglycerol-ß-guaiacyl ether (GG) as the lignin model and used the ML technology to train models that can rapidly predict the cleavage activity of ILs. Taking the easily accessible bond dissociation energy (BDE) of the ß-O-4 bond in GG as the target, an ML model with r > 0.93 for predicting the catalytic activity of ILs was obtained. The change tendency of the BDE is consistent with the experimental yield of guaiacol, reflecting the reliability of the ML model. Finally, [C2MIM][Tyrosine] and [C3MIM][Tyrosine] as the optimal candidates for future applications were screened out. This is a novel strategy for predicting the catalytic activity of ILs on lignin without the need to calculate complicated reaction pathways while reducing time consumption. It is anticipated that the ML model can be utilized in future practical applications for targeted cleavage of lignin.

Osteoinductive hybrid hydrogel membranes for in situ bone regeneration in hyperglycemia.

In hyperglycemia patients, suffering from insufficient vascularization and vascular network lesion, tissue regeneration, such as bone repair, is limited and maybe delayed by the secondary injury and hyperglycemic microenvironment. Typically, dental therapies involving guided bone regeneration is facing a difficult condition in the patients with diabetes. In this study, a hybrid membrane was endowed with biomimetic function to create an angiogenesis-inductive microenvironment by calcium ion release to overcome the limitations of bone tissue regeneration in diabetic patients. Biomineralized calcium resource was Janus-structured onto the surface of hybrid hydrogel by layer-by-layer technique to enhance vascularization and improve the bone regeneration in this study. The release of calcium ions from mineralized phases was controlled by the solubility of inorganic phases and the degradation of gels, promoting HIF-1α expression and creating a key role in angiogenesis stimulation. With highly enhanced calcium signaling and blood vessel formation, the hybrid hydrogel membranes improved the recruitment, proliferation and differentiation of mesenchymal stem cells and endothelial progenitors, confirmed by the enhancement of microvascular regeneration and new bone formation in the critical-sized calvarial defect in diabetic model in vivo. Our study demonstrates a translational potential of hybrid hydrogels engineered with inorganic minerals for orthopedic applications in hyperglycemia.

Comparison of the effect of bone induction with different exercise modes in mice.

BACKGROUD: Calcium phosphate biomaterials have excellent bone inductivity, and exercise can promote the bone formation of biomaterials in animals, but it is not clear which exercise mode is better. OBJECTIVE: To explore the effect of different exercise modes on osteoinduction by calcium phosphate-based biomaterials which were implanted in mice. METHOD: The collagen-thermosensitive hydrogel-calcium phosphate (CTC) composite was prepared and transplanted in the thigh muscle of mice, then all mice were divided randomly into four groups (n = 10): the uphill running group, the downhill running group, the swimming group and the control group (conventional breeding). Ten weeks later, the samples were harvested, fixed, decalcified, embedded in paraffin and stained with hematoxylin and eosin (H&E), and then the osteoinduction phenomenon was observed and compared through digital slice scanning system. The area percentage of new bone-related tissues and the number of osteocytes and chondrocytes were counted and calculated. Lastly, the immunohistochemistry of type I collagen (ColI) and osteopontin (OPN) was performed to identify the new bone tissues. RESULTS: The area percentage of new bone-related tissues and the number of osteocytes and chondrocytes were positively correlated; ordering from most to least of each group were as followings: the uphill running group > the swimming group > the downhill running group > the control group. The immunostaining of ColI and OPN results showed that both of the two proteins were identified in the new bone tissues, indicating that the CTC composite could induce ectopic bone formation in mice, especially training for uphill running and swimming. CONCLUSION: Our results show that uphill running or swimming is a form of exercise that is beneficial to osteogenesis. According to this, we propose treatment with artificial bone transplantation to patients who suffer from bone defects. Patients should do moderate exercise, such as running uphill on the treadmill or swimming.

Oxidation of organosolv lignin in a novel surfactant-free microemulsion reactor.

Lignin is considered as a promising substitute for fossil resources, but its efficient conversion remains a huge challenge due to the structural complexity and immiscibility with typical solvents. Herein, a series of surfactant-free microemulsion reactors comprised of n-octane, water and n-propanol were designed and their corresponding phase behaviors alongside their ability to intensify oxidative depolymerization of lignin were explored. Experimental results show that the phenolic monomer yield improves substantially (40-500 wt%) by comparison with processes performed in a single solvent. Detailed characterizations also suggest that the above intensification is rationalized by the solubilization effect of microemulsion system and directional aggregation of lignin at the microemulsion interface.

The preparation and application of calcium phosphate biomedical composites in filling of weight-bearing bone defects.

Nowadays, artificial bone materials have been widely applied in the filling of non-weight bearing bone defects, but scarcely ever in weight-bearing bone defects. This study aims to develop an artificial bone with excellent mechanical properties and good osteogenic capability. Firstly, the collagen-thermosensitive hydrogel-calcium phosphate (CTC) composites were prepared as follows: dissolving thermosensitive hydrogel at 4 °C, then mixing with type I collagen as well as tricalcium phosphate (CaP) powder, and moulding the composites at 37 °C. Next, the CTC composites were subjected to evaluate for their chemical composition, micro morphology, pore size, Shore durometer, porosity and water absorption ability. Following this, the CTC composites were implanted into the muscle of mice while the 70% hydroxyapatite/30% ß-tricalcium phosphate (HA/TCP) biomaterials were set as the control group; 8 weeks later, the osteoinductive abilities of biomaterials were detected by histological staining. Finally, the CTC and HA/TCP biomaterials were used to fill the large segments of tibia defects in mice. The bone repairing and load-bearing abilities of materials were evaluated by histological staining, X-ray and micro-CT at week 8. Both the CTC and HA/TCP biomaterials could induce ectopic bone formation in mice; however, the CTC composites tended to produce larger areas of bone and bone marrow tissues than HA/TCP. Simultaneously, bone-repairing experiments showed that HA/TCP biomaterials were easily crushed or pushed out by new bone growth as the material has a poor hardness. In comparison, the CTC composites could be replaced gradually by newly formed bone and repair larger segments of bone defects. The CTC composites trialled in this study have better mechanical properties, osteoinductivity and weight-bearing capacity than HA/TCP. The CTC composites provide an experimental foundation for the synthesis of artificial bone and a new option for orthopedic patients.

3D Printing of Micro- and Nanoscale Bone Substitutes: A Review on Technical and Translational Perspectives.

Recent developments in three-dimensional (3D) printing technology offer immense potential in fabricating scaffolds and implants for various biomedical applications, especially for bone repair and regeneration. As the availability of autologous bone sources and commercial products is limited and surgical methods do not help in complete regeneration, it is necessary to develop alternative approaches for repairing large segmental bone defects. The 3D printing technology can effectively integrate different types of living cells within a 3D construct made up of conventional micro- or nanoscale biomaterials to create an artificial bone graft capable of regenerating the damaged tissues. This article reviews the developments and applications of 3D printing in bone tissue engineering and highlights the numerous conventional biomaterials and nanomaterials that have been used in the production of 3D-printed scaffolds. A comprehensive overview of the 3D printing methods such as stereolithography (SLA), selective laser sintering (SLS), fused deposition modeling (FDM), and ink-jet 3D printing, and their technical and clinical applications in bone repair and regeneration has been provided. The review is expected to be useful for readers to gain an insight into the state-of-the-art of 3D printing of bone substitutes and their translational perspectives.

A triple-coated ligament graft to facilitate ligament-bone healing by inhibiting fibrogenesis and promoting osteogenesis.

Absence of ligament-bone healing due to poor bioactivity and hyperplasia of fibrous tissue caused by immune response severely impairs ligament grafts' functional duration in anterior cruciate ligament (ACL) reconstruction. While osteogenic modification is a popular technique for promoting ligament-bone integration, inadequate osseointegration remains a common experience, due to occupying fibrous hyperplasia and impaired osteogenesis potential. In the present study, a triple-nano-coating polyethylene terephthalate (PET) graft was developed by polydopamine self-assembly, chondroitin sulfate (CS) chemical-grafting and BMP-2 physical-immobilization to facilitate robust ligament-bone healing, The CS/polydopamine-modified PET (C-pPET) graft was demonstrated to inhibit fibrogenesis by regulating polarization of macrophages and promoting the secretion of anti-inflammatory factors. Moreover, the immunoregulatory function of CS cooperated with BMP-2 to facilitate osteogenic differentiation of stem cells, promoting the expression of ALP, Runx2, OCN and COL I. Bone regeneration was significantly enhanced at early-middle stage in the BMP-loaded pPET (B/pPET) group, while occurring at middle-late stage in the C-pPET group. Continuous new bone formation and optimal ligament-bone healing were observed in the B/C-pPET group via sequential and synergistic immune osteogenesis by CS and cytokine osteogenesis by BMP-2. Thus, the present study revealed a practical avenue for the promotion of ligament-bone healing through the development of a triple-nano-coating engineered ligament combining immunoregulatory anti-fibrogenesis and sequential-synergistic osteogenesis, which holds a great potential for improving the clinical efficacy of ligament graft in ACL reconstruction. STATEMENT OF SIGNIFICANCE: A triple-nano-coating polyethylene terephthalate (PET) graft was developed by polydopamine self-assembly, chondroitin sulfate (CS) chemical-grafting and BMP-2 physical-immobilization to facilitate robust ligament-bone healing. This study demonstrated that the multifunctional ligament grafts could reshape the local immune microenvironment by regulating macrophage phenotype and immune cytokine secretion to inhibit the fibrous hyperplasia and regulate stem cell towards osteogenic differentiation to promote bone regeneration. The present study demonstrates that efficient ligament-bone healing is achieved via the combination of immunoregulatory anti-fibrogenesis and dual osteogenesis of immunoregulation and cytokine induction.

Protein A-based antibody immobilization onto polymeric microdevices for enhanced sensitivity of enzyme-linked immunosorbent assay.

Highly efficient antibody immobilization is extremely crucial for the development of high-performance polymeric microdevices for enzyme-linked immunosorbent assay (ELISA). In this article, a site-selective tyrosinase (TR)-catalyzed protein A strategy for antibody immobilization was developed to enhance the sensitivity of ELISA in poly-(methyl methacrylate) (PMMA) microchannels for interferon-gamma (IFN-gamma) assay. To effectively immobilize the target antibodies, oxygen plasma was first used to activate the inert PMMA. This is followed by poly(ethyleneimine) (PEI) coating, an amine-containing functional polymer. For comparison, protein A was also immobilized through the commonly used amine-glutaraldehyde (GA) chemistry. Oxygen plasma treatment effectively increased the amount of PEI attachment and subsequent binding efficiency of the primary antibody. The antibody immobilized via TR-catalyzed protein A was able to provide much better specific antigen capture efficiency than GA chemistry due to the optimal spacing and orientation. Consequently, by using this new method, the detection signal and the signal-to-noise ratio of the ELISA immunoassay in microdevices were all significantly improved. In comparison to the standard assay carried out in the 96-well microtiter plate, the treated microchannels exhibited a broader detection range and a shorter detection time. And the detection limit was also decreased to 20 pg/mL, much lower than that obtained in other microdevices.

Chondroitin sulfate-polydopamine modified polyethylene terephthalate with extracellular matrix-mimetic immunoregulatory functions for osseointegration.

Optimal integration between the polyethylene terephthalate (PET) graft and host bone is a prerequisite to obtain a satisfactory outcome after graft implantation for ligament reconstruction. Recent studies indicate that complex biosignals including immunoregulation, cell recruitment, and osteogenic differentiation provided by the extracellular matrix (ECM) are conducive to promoting osseointegration. In the present study, a chondroitin sulfate (CS)/polydopamine-modified PET graft was developed to regulate the local immune microenvironment, guide stem cell behavior, and promote new bone formation. We found that CS-modified PET grafts significantly regulated the macrophage phenotype switching from M1 to M2 and promoted the expression of pro-repair cytokines including interleukin (IL)-4, IL-10 and transforming growth factor (TGF)-ß1. Moreover, the immunoregulatory function of CS-modified PET guided stem cell behaviors, including recruitment, adhesion, and proliferation, and enhanced the osteogenic differentiation of stem cells. In vivo experiments confirmed that CS-modified PET switched the local immune microenvironment status from pro-inflammatory to anti-inflammatory, up-regulated osteogenic marker expression, and promoted the bone regeneration process, so as to achieve graft-bone osseointegration. These results indicate that an ECM-biomimetic immunoregulatory coating is an effective approach to promote graft integration. This study proposes an effective strategy for an artificial graft to achieve graft-bone osseointegration through immunoregulatory osteogenesis.

The synergistic effect of strontium-substituted hydroxyapatite and microRNA-21 on improving bone remodeling and osseointegration.

Surgical failure, mainly caused by loosening implants, causes great mental and physical trauma to patients. As the population ages, improving the physicochemical properties of implants to achieve favourable osseointegration will continue to be the focus of future research. Herein, we fabricated a titanium (Ti)-based SrHA/miR-21 composite coating that was generated by hydrothermal deposition of SrHA followed by miR-21 nanocapsule immobilisation. Both SrHA nanoparticles with good superhydrophilicity and miR-21 nanocapsules with uniform sizes were distributed evenly on the surface of Ti. In vitro experiments revealed that the composite coating was beneficial for osteoblast proliferation, differentiation and mineralization. In vivo evaluations demonstrated that this coating could not only promote the expression of the angiogenic factor CD31 but also enhance the expression of osteoblastic genes to facilitate angio-osteogenesis. In addition, the composite coating also showed a decreased RANKL expression compared with the miR-21 coating. As a result, the SrHA/miR-21 composite coating promoted new bone formation and mineralization and thus enhanced osseointegration and bone-implant bonding strength. Therefore, this method provides a new strategy for bone repair.

An oral delivery device based on self-folding hydrogels.

A self-folding miniature device has been developed to provide enhanced mucoadhesion, drug protection, and targeted unidirectional delivery. The main part of the device is a finger like bilayered structure composed of two bonded layers. One is a pH-sensitive hydrogel based on crosslinked poly(methyacrylic acid) (PMAA) that swells significantly when in contact with body fluids, while the other is a non-swelling layer based on poly(hydroxyethyl methacrylate) (PHEMA). A mucoadhesive drug layer is attached on the bilayer. Thus, the self-folding device first attaches to the mucus and then curls into the mucus due to the different swelling of the bilayered structure, leading to enhanced mucoadhesion. The non-swelling PHEMA layer can also serve as a diffusion barrier, minimizing any drug leakage in the intestine. The resulting unidirectional release provides improved drug transport through the mucosal epithelium. The functionality of this device is successfully demonstrated in vitro using a porcine small intestine.

Design of a novel hydrogel-based intelligent system for controlled drug release.

The present work focused on the design of an assembled drug delivery system (DDS) to provide multifunctions, such as drug protection, self-regulated oscillatory release, and targeted uni-directional delivery by a bilayered self-folding gate and simple surface mucoadhesion. In this device, a pH-sensitive hydrogel together with a poly(hydroxyethyl methacrylate) (HEMA) barrier was used as a gate to control drug release. In addition, poly(HEMA) coated with poly(ethylene oxide)/poly(propylene oxide)/poly(ethylene oxide) (PEO-PPO-PEO) surfactant was utilized to enhance mucoadhesion on the device surface. The release profiles of two model drugs, acid orange 8 (AO8) and bovine serum albumin (BSA) were studied in this assembled system, which compared with the conventional drug-entrapped carriers and enteric-coating systems. Furthermore, targeted uni-directional release was demonstrated in a side-by-side diffusion cell. In conclusion, for such an assembled device, the poly(HEMA) layer not only affects the folding direction but also serves as a barrier to protect the model drugs. The release time can be controlled by the thickness of the bilayered gate and the drug reservoir. Due to the reversible swelling behavior of poly(methyacrylic acid-g-ethylene glycol) (p(MAA-g-EG)) gels, the bilayered gate can sense the environmental pH change and achieve an oscillatory release pattern. Moreover, the local targeting and uni-directional release have been successfully demonstrated in vitro.

Thymine modified amphiphilic biodegradable copolymers for photo-cross-linked micelles as stable drug carriers.

A photo-cross-linked micelle is synthesized via photodimerization of thymine moieties fabricated from amphiphilic block copolymers (mPEG-b-P(LA-co-MPT). The crosslinking behavior is monitored by UV-Vis spectra and (1) H NMR. Dynamic light scattering (DLS) and transmission electron microscopy (TEM) showed that cross-linked micelles had smaller sizes than their uncross-linked precursors. In vitro studies reveal that cross-linking of the micelle cores results in a slow drug release and faster cellular uptake in comparison with uncross-linked ones in MCF-7 and Hela cells. Moreover, the paclitaxel (PTX)-loaded core-cross-linked micelles exhibit similar anticancer efficacy as free PTX. This work provides a convenient tool for designing a more stable structure in the blood circulation to realize a controlled drug delivery.

A naonoporous cell-therapy device with controllable biodegradation for long-term drug release.

Herein we describe the development and implementation of a nanoporous cell-therapy device with controllable biodegradation. Dopamine-secreting PC12 cells were housed within newly formulated alginate-glutamine degradable polylysine (A-GD-PLL) microcapsules. The A-GD-PLL microcapsules provided a 3-D microenvironment for good spatial cell growth, viability and proliferation. The microcapsules were subsequently placed within a poly(ethylene glycol) (PEG)-coated poly(ε-caprolactone) (PCL) chamber covered with a PEG-grafted PCL nanoporous membrane formed by phase inversion. To enhance PC12 cell growth and to assist in controlled degradation of both the PC12 cells and the device construct, small PCL capsules containing neural growth factor (PCL-NGF) and a poly(lactic-co-glycolic acid) pellet containing glutamine (PLGA-GLN) were also placed within the PCL chamber. Release of NGF from the PCL-NGF capsules facilitated cell proliferation and viability, while the controlled release of GLN from the PLGA-GLN pellet resulted in A-GD-PLL microcapsule degradation and eventual PC12 cell death following a pre-specified period of time (4 weeks in this study). In vivo, our device was found to be well tolerated and we successfully demonstrated the controlled release of dopamine over a period of four weeks. This integrated biodegradable device holds great promise for the future treatment of a variety of diseases.

Use of a nanoporous biodegradable miniature device to regulate cytokine release for cancer treatment.

The clinical management of locally recurrent or unresectable malignant melanoma continues to pose a significant challenge. These lesions are typically painful and currently available treatments, such as repeated intratumoral injections of interferon-alpha (IFN-α), are costly and inconvenient. Nanotechnology offers promise as a novel means of drug delivery. A capsule-like nanoporous miniature device (NMD) based on a biodegradable polymer, poly(polycaprolactone) (PCL) was developed for controlling the local delivery of immunological agents to the tumor microenvironment. The device consists of a nanoporous release gate, a fabricated drug reservoir loaded with IFN-α and a protective layer. To improve the biocompatibility of the device, a hydrophilic poly(ethylene glycol) monoacrylate was applied to the outside wall of the device via covalent bonding techniques. Microscopic visualization of the nanoporous gate from in vitro experiments exhibited good pore stability over a two-month period. In vitro experiments demonstrated a constant release rate of IFN-α from the NMD and showed that the release rate could be regulated by the gate area. The released IFN-α was biologically functional. Cytokine-containing supernatants from release experiments phosphorylated signal transducer and activator of transcription (STAT1) in peripheral blood mononuclear cells. Subcutaneous implantation of the NMDs was well tolerated and associated with an anti-tumor effect in a human xenograft model of melanoma. There was no evidence of a significant inflammatory response to the NMD or encapsulation of the NMD by fibrosis. These experiments show that the NMD can be fabricated and employed in vivo as a versatile drug delivery platform.