Electrochemical deposition of Ppy/Dex/ECM coatings and their regulation on cellular responses through electrical controlled drug release.

Bone tissue engineering requires a material that can simultaneously promote osteogenic differentiation and anti-inflammatory effects at specific times in response to a series of problems after bone implantation. In this study, the porous network-like titanium matrix was constructed and polypyrrole/dexamethasone (Ppy/Dex) composite coatings with three-dimensional nano-network structure were prepared by electrochemical deposition. The biocompatibility of the composite coatings was further improved by the composite of the extracellular matrix (ECM). The Ppy/Dex/ECM composite coatings released Dex by changing the redox state of Ppy under the electrical stimulation of negative pulses, achieving a drug release controlled by electric field. In terms of osteogenic differentiation, the Ppy/Dex/ECM composite coatings exhibited the best osteogenic activity under electrical controlled release, indicating the synergistic effect of Dex and ECM on osteogenic differentiation. In terms of anti-inflammatory properties, ECM exhibited simultaneous inhibition of both pro- and anti-inflammatory process, while Dex demonstrated significant promotion of anti-inflammatory processes. In this work, the effect of electrical controlled drug release on osteogenic differentiation and inflammation in the ECM cell microenvironment was achieved by preparing Ppy/Dex/ECM composite coatings, which is of great significance for bone tissue engineering and regenerative medicine.

Regulation of Macrophage Polarization on Chiral Potential Distribution of CFO/P(VDF-TrFE) Films.

Surface potentials of biomaterials have been shown to regulate cell fate commitment. However, the effects of chirality-patterned potential distribution on macrophage polarization are still only beginning to be explored. In this work, we demonstrated that the chirality-patterned potential distribution of CoFe2O4/poly(vinylidene fluoride-trifluoroethylene) (CFO/P(VDF-TrFE)) films could significantly down-regulate the M1 polarization of bone marrow-derived macrophages (BMDMs). Specifically, the dextral-patterned surface potential distribution simultaneously up-regulated the expression of M2-related markers of BMDMs. The results were attributed to the sensitive difference of integrin subunits (α5ß1 and αvß3) to the dextral- and sinistral-patterned surface potential distribution, respectively. The interaction difference between the integrin subunits and surface potential distribution altered the cell adhesion and cytoskeletal structure and thereby the polarization behavior of BMDMs. This work, therefore, emphasizes the importance of chirality of potential distribution on cell behavior and provides a new strategy to regulate the immune response of biomaterials.

The osteogenic response to chirality-patterned surface potential distribution of CFO/P(VDF-TrFE) membranes.

Piezoelectric poly(vinylidene fluoride-trifluoroethylene) has demonstrated an ability to promote osteogenesis, and biomaterials with a chirality-patterned topological surface could enhance cellular osteogenic differentiation. In this work, we created a chirality-patterned surface potential distribution of CoFe2O4/poly(vinylidene fluoride-trifluoroethylene (CFO/P(VDF-TrFE)) membranes to explore their osteogenic response under no change in surface chemical and topology, attempting to further strengthen the ability of the membranes to promote osteogenesis. The chirality-patterned surface potential distribution was established by microdomain contact polarization with the help of sinistral/dextral-patterned ITO interdigital microelectrodes. In the in vitro evaluations, the mesenchymal stem cells showed a positive response in osteogenic differentiation to CFO/P(VDF-TrFE) membranes with both sinistral- and dextral-patterned surface potential distributions, however, the dextral-patterned distribution gave a stronger response than the sinistral-patterned one. And the in vivo evaluation showed a response tend in new bone tissue formation similar to the in vitro evaluations. The stronger response in osteogenic differentiation and osteogenesis for the CFO/P(VDF-TrFE) membrane with the dextral-patterned distributions may be attributed to that the intense interaction of the cells with the electrophysiological microenvironment appears due to a correspondingly higher expression of integrin α5ß1, which significantly up-regulates the Arp2/3 complex expression, a crucial factor for cytoskeleton reorganization, possibly increases cytoskeleton contractility, and strengthens the transduction of the osteogenesis-related signaling cascade. This work proves that the chirality-patterns in surface potential distributions could provide an osteogenic response similar to a chirality-patterned topological surface.

Anisotropic magneto-mechanical stimulation on collagen coatings to accelerate osteogenesis.

Mechanical stimulation has been considered to be critical to cellular response and tissue regeneration. However, harnessing the direction of mechanical stimulation during osteogenesis still remains a challenge. In this study, we designed a series of novel magnetized collagen coatings (MCCs) (randomly or parallel-oriented collagen fibers) to exert the anisotropic mechanical stimulation using oriented magnetic actuation during osteogenesis. Strikingly, we found the osteogenic differentiation of bone marrow mesenchymal stem cells (BMSCs) were significantly up-regulated when the direction of magnetic actuation was parallel to the randomly-oriented collagen coating surface, in contrast to the down-regulated capacity under the perpendicular magnetic actuation. Moreover, further exerting a parallel mechanical stimulation along the parallel-oriented collagen coating, which cells have been oriented by the oriented collagens, were not only able to up-regulate the osteogenic differentiation of BMSCs but also promote the new bone formation during osteogenesis in vivo. We also demonstrated the anisotropic magneto-mechanical stimulation for the osteogenic differences might be attributed to the stretching or bending tensile status of collagen fibers controlled by the direction of magnetic actuation, driving the α5ß1-dependent integrin signaling cascade. This study therefore got insight of understanding the directional mechanical stimulation on osteogenesis, and also paved a way for sustaining regulation of the biomaterials-host interface.

Enhanced osteogenic differentiation of mesenchymal stem cells on P(VDF-TrFE) layer coated microelectrodes.

Electrical stimulation has been proved to be critical to regulate cell behavior. But, cell behavior is also susceptible to multiple parameters of the adverse interferences such as surface current, electrochemical reaction products, and non-uniform compositions, which often occur during direct electric stimulation. To effectively prevent the adverse interferences, a novel piezoelectric poly(vinylidene fluoride-trfluoroethylene)(P(VDF-TrFE)) layer was designed to coat onto the indium tin oxide (ITO) planar microelectrode. We found the electrical stimulation was able to regulate the osteogenic differentiation of mesenchymal stem cells (MSCs) through calcium-mediated PKC signaling pathway. Meanwhile, the surface charge of the designed P(VDF-TrFE) coating layer could be easily controlled by the pre-polarization process, which was demonstrated to trigger integrin-mediated FAK signaling pathway, finally up-regulating the osteogenic differentiation of MSCs. Strikingly, the crosstalk in the downstream of the two signaling cascades further strengthened the ERK pathway activation for osteogenic differentiation of MSCs. This P(VDF-TrFE) layer coated electrical stimulation microelectrodes therefore provide a distinct strategy to manipulate multiple-elements of biomaterial surface to regulate stem cell fate commitment.

Enhancing osteogenic differentiation of BMSCs on high magnetoelectric response films.

High performance of biomaterial surfaces provides a sound basis to mediate cellular growth behavior. In this work, we attempted to incorporate both positive and negative magnetostriction particles of CoFe2O4 (CFO) and TbxDy1-xFe2 alloy (TD) into piezoelectric poly(vinylidene fluoride-trifluoroethylene) (P(VDF-TrFE)) for forming high magnetoelectric effect films, on which osteogenic differentiation could be dynamically mediated by a magnetic-field-induced surface potential (φME).The negatively poled film with TD/CFO volume ratio of 1:4 (1T4C) showed a highest magnetoelectric effect with φME of -171 mV at 2800 Oe. Compared with CFO/P(VDF-TrFE) and TD/P(VDF-TrFE) films, the φME increased about 213% and 173%, respectively. This could result from that P(VDF-TrFE) dipole domains receive a larger off-axial stress caused by the distribution characteristic of CFO and TD in P(VDF-TrFE), consequently to facilitate P(VDF-TrFE) dipole domain rearrangement. When MSCs were cultured on 1T4C film for 7 or 14 days, the magnetic actuation was setup to begin at the 4th or 8th day after the culture. The 7-day osteogenic differentiation was hardly affected for magnetic actuation at 4th day, moreover, the 14-day differentiation was significantly enhanced for magnetic actuation at 8th day. The enhancement appears just at a relatively late period of the cell growth, probably because the cells need a steady change in cell membrane potential to disassociate pairs of ß-catenin and E-cadherin and activate osteogenic-related signaling pathway. This work could provide an alternative way to promote performance for magnetoelectric materials, and get insight into understanding of interactions of surface potential with cells.