Comparison of retinal degeneration treatment with four types of different mesenchymal stem cells, human induced pluripotent stem cells and RPE cells in a rat retinal degeneration model.

BACKGROUND: Retinal degeneration (RD) is a group of disorders on irreversible vision loss. Multiple types of stem cells were used in clinical trials for RD treatment. However, it remains unknown what kinds of stem cells are most effective for the treatment. Therefore, we investigated the subretinal transplantation of several types of stem cells, human adipose-derived stem cells (hADSCs), amniotic fluid stem cells (hAFSCs), bone marrow stem cells (hBMSCs), dental pulp stem cells (hDPSCs), induced pluripotent stem cell (hiPSC), and hiPSC-derived retinal pigment epithelium (RPE) cells for protection effects, paracrine effects and treatment efficiency in an RD disease model rats. METHODS: The generation and characterization of these stem cells and hiPSC-derived RPE cells were performed before transplantation. The stem cells or hiPSC-derived RPE cell suspension labelled with CellTracker Green to detect transplanted cells were delivered into the subretinal space of 3-week-old RCS rats. The control group received subretinal PBS injection or non-injection. A series of detections including fundus photography, optomotor response (OMR) evaluations, light-dark box testing, electroretinography (ERG), and hematoxylin and eosin (HE) staining of retinal sections were conducted after subretinal injection of the cells. RESULTS: Each stem cell, hiPSC-derived RPE cell or PBS (blank experiment) was successfully transplanted into at least six RCS rats subretinally. Compared with the control rats, RCS rats subjected to subretinal transplantation of any stem cells except hiPSCs showed higher ERG waves (p < 0.05) and quantitative OMR (qOMR) index values (hADSCs: 1.166, hAFSCs: 1.249, hBMSCs: 1.098, hDPSCs: 1.238, hiPSCs: 1.208, hiPSC-RPE cells: 1.294, non-injection: 1.03, PBS: 1.06), which indicated better visual function, at 4 weeks post-injection. However, only rats that received hiPSC-derived RPE cells maintained their visual function at 8 weeks post-injection (p < 0.05). The outer nuclear layer thickness observed in histological sections after HE staining showed the same pattern as the ERG and qOMR results. CONCLUSIONS: Compared to hiPSC-derived RPE cells, adult and fetal stem cells yielded improvements in visual function for up to 4 weeks post-injection; this outcome was mainly based on the paracrine effects of several types of growth factors secreted by the stem cells. Patients with RD will benefit from the stem cell therapy.

Bioinert Control of Zwitterionic Poly(ethylene terephtalate) Fibrous Membranes.

Poly(ethylene terephtalate) (PET)-based materials face general biofouling issues that we addressed by grafting a copolymer of glycidyl methacrylate and sulfobetaine methacrylate, poly(GMA- r-SBMA). The grafting procedure involved a dip-coating step followed by UV-exposure and led to successful grafting of the copolymer as evidenced by X-ray photoelectron spectroscopy and zeta potential measurements. It did not modify the pore size nor the porosity of the PET membranes. In addition, their surface hydrophilicity was considerably improved, with a water contact angle falling to 30° in less than 20 s and 0° in less than 1 min. The effect of copolymer concentration in the coating bath (dip-coating procedure) and UV exposure time (UV step) were scrutinized during biofouling studies involving several bacteria such as Escherichia coli and Stenotrophomonas maltophilia, but also whole blood and HT1080 fibroblasts cells. The results indicate that if all conditions led to improved biofouling mitigation, due to the efficiency of the zwitterionic copolymer and grafting procedure, a higher concentration (15 mg/mL) and longer UV exposure time (at least 10 min) enhanced the grafting density which reflected on the biofouling results and permitted a better general biofouling control regardless of the nature of the biofoulant (bacteria, blood cells, fibroblasts).

Stem cell therapies for myocardial infarction in clinical trials: bioengineering and biomaterial aspects.

Cardiovascular disease remains the leading cause of death and disability in advanced countries. Stem cell transplantation has emerged as a promising therapeutic strategy for acute and chronic ischemic cardiomyopathy. The current status of stem cell therapies for patients with myocardial infarction is discussed from a bioengineering and biomaterial perspective in this review. We describe (a) the current status of clinical trials of human pluripotent stem cells (hPSCs) compared with clinical trials of human adult or fetal stem cells, (b) the gap between fundamental research and application of human stem cells, (c) the use of biomaterials in clinical and pre-clinical studies of stem cells, and finally (d) trends in bioengineering to promote stem cell therapies for patients with myocardial infarction. We explain why the number of clinical trials using hPSCs is so limited compared with clinical trials using human adult and fetal stem cells such as bone marrow-derived stem cells.

A Zwitterionic-Shielded Carrier with pH-Modulated Reversible Self-Assembly for Gene Transfection.

Cationic vectors are ideal candidates for gene delivery thanks to their capability to carry large gene inserts and their scalable production. However, their cationic density gives rise to high cytotoxicity. We present the proper designed core-shell polyplexes made of either poly(ethylene imine) (PEI) or poly(2-dimethylamino ethyl methacrylate) (PDMAEMA) as the core and zwitterionic poly(acrylic acid)-block-poly(sulfobetaine methacrylate) (PAA-b-PSBMA) diblock copolymer as the shell. Gel retardation and ethidium bromide displacement assays were used to determine the PEI/DNA or PDMAEMA/DNA complexation. At neutral pH, the copolymer serves as a protective shell of the complex. As PSBMA is a nonfouling block, the shell reduced the cytotoxicity and enhanced the hemocompatibility (lower hemolysis activity, longer plasma clotting time) of the gene carriers. PAA segments in the copolymer impart pH sensitivity by allowing deshielding of the core in acidic solution. Therefore, the transfection efficiency of polyplexes at pH 6.5 was better than at pH 7.0, from ß-galactosidase assay, and for all PAA-b-PSBMA tested. These results were supported by more favorable physicochemical properties in acidic solution (zeta potential, particle size, and interactions between the polymer and DNA). Thus, the results of this study offer a potential route to the development of efficient and nontoxic pH-sensitive gene carriers.

Odontogenic epithelial stem cells: hidden sources.

The ultimate goal of dental stem cell research is to construct a bioengineered tooth. Tooth formation occurs based on the well-organized reciprocal interaction of epithelial and mesenchymal cells. The dental mesenchymal stem cells are the best explored, but because the human odontogenic epithelium is lost after the completion of enamel formation, studies on these cells are scarce. The successful creation of a bioengineered tooth is achievable only when the odontogenic epithelium is reconstructed to produce a replica of natural enamel. This article discusses the untapped sources of odontogenic epithelial stem cells in humans, such as those present in the active dental lamina in postnatal life, in remnants of dental lamina (the gubernaculum cord), in the epithelial cell rests of Malassez, and in reduced enamel epithelium. The possible uses of these stem cells in regenerative medicine, not just for enamel formation, are discussed.

Hemocompatibility of polyampholyte copolymers with well-defined charge bias in human blood.

In this work, the hemocompatibility of polyampholyte copolymers from the mixed-charge copolymerization of negatively charged 3-sulfopropyl methacrylate (SA) and positively charged [2-(methacryloyloxy)ethyl] trimethylammonium (TMA) was studied. Charge-bias variation of the prepared poly(SA-co-TMA) copolymers can be controlled using the regulated SA and TMA monomer ratio via homogeneous free radical copolymerization. A systematic study of how charge-bias variations in poly(SA-co-TMA) copolymers affect the hemocompatibility in human blood plasma was reported. The hydrodynamic size of prepared polymers and copolymers is determined to illustrate the correlations between intermolecular cationic/anionic associations and the blood compatibility of polySA, poly(SA-co-TMA), and polyTMA suspensions in human blood plasma. It was found that the protein resistance and hydration capability of prepared copolymers can be effectively controlled by regulating the charge balance of the SA/TMA compositions in poly(SA-co-TMA). The results suggest that polyampholyte copolymers of poly(SA-co-TMA) with overall charge neutrality have a high hydration capability and the best antifouling, anticoagulant, and antihemolytic activities as well as zwitterionic sulfobetaine-based homopolymers when in contact with blood plasma at human body temperature.

Xeno-free culture and proliferation of hPSCs on 2D biomaterials.

Human pluripotent stem cells (human embryonic stem cells (hESCs) and induced pluripotent stem cells (hiPSCs)) have unlimited proliferative potential, whereas adult stem cells such as bone marrow-derived stem cells and adipose-derived stem cells have problems with aging. When hPSCs are intended to be cultured on feeder-free or xeno-free conditions without utilizing mouse embryonic fibroblasts or human fibroblasts, they cannot be cultured on conventional tissue culture polystyrene dishes, as adult stem cells can be cultured but should be cultivated on material surfaces grafted or coated with (a) natural or recombinant extracellular matrix (ECM) proteins, (b) ECM protein-derived peptides and specific synthetic polymer surfaces in xeno-free and/or chemically defined conditions. This review describes current developing cell culture biomaterials for the proliferation of hPSCs while maintaining the pluripotency and differentiation potential of the cells into 3 germ layers. Biomaterials for the cultivation of hPSCs without utilizing a feeder layer are essential to decrease the risk of xenogenic molecules, which contributes to the potential clinical usage of hPSCs. ECM proteins such as human recombinant vitronectin, laminin-511 and laminin-521 have been utilized instead of Matrigel for the feeder-free cultivation of hPSCs. The following biomaterials are also discussed for hPSC cultivation: (a) decellularized ECM, (b) peptide-grafted biomaterials derived from ECM proteins, (c) recombinant E-cadherin-coated surface, (d) polysaccharide-immobilized surface, (e) synthetic polymer surfaces with and without bioactive sites, (f) thermoresponsive polymer surfaces with and without bioactive sites, and (g) synthetic microfibrous scaffolds.

Bioadhesive control of plasma proteins and blood cells from umbilical cord blood onto the interface grafted with zwitterionic polymer brushes.

In this work, bioadhesive behavior of plasma proteins and blood cells from umbilical cord blood (UCB) onto zwitterionic poly(sulfobetaine methacrylate) (polySBMA) polymer brushes was studied. The surface coverage of polySBMA brushes on a hydrophobic polystyrene (PS) well plate with surface grafting weights ranging from 0.02 mg/cm(2) to 0.69 mg/cm(2) can be effectively controlled using the ozone pretreatment and thermal-induced radical graft-polymerization. The chemical composition, grafting structure, surface hydrophilicity, and hydration capability of prepared polySBMA brushes were determined to illustrate the correlations between grafting properties and blood compatibility of zwitterionic-grafted surfaces in contact with human UCB. The protein adsorption of fibrinogen in single-protein solutions and at complex medium of 100% UCB plasma onto different polySBMA brushes with different grafting coverage was measured by enzyme-linked immunosorbent assay (ELISA) with monoclonal antibodies. The grafting density of the zwitterionic brushes greatly affects the PS surface, thus controlling the adsorption of fibrinogen, the adhesion of platelets, and the preservation of hematopoietic stem and progenitor cells (HSPCs) in UCB. The results showed that PS surfaces grafted with polySBMA brushes possess controllable hydration properties through the binding of water molecules, regulating the bioadhesive and bioinert characteristics of plasma proteins and blood platelets in UCB. Interestingly, it was found that the polySBMA brushes with an optimized grafting weight of approximately 0.1 mg/cm(2) at physiologic temperatures show significant hydrated chain flexibility and balanced hydrophilicity to provide the best preservation capacity for HSPCs stored in 100% UCB solution for 2 weeks. This work suggests that, through controlling grafting structures, the hemocompatible nature of grafted zwitterionic polymer brushes makes them well suited to the molecular design of regulated bioadhesive interfaces for use in the preservation of HSPCs from human UCB.

Hemocompatible control of sulfobetaine-grafted polypropylene fibrous membranes in human whole blood via plasma-induced surface zwitterionization.

In this work, the hemocompatibility of zwitterionic polypropylene (PP) fibrous membranes with varying grafting coverage of poly(sulfobetaine methacrylate) (PSBMA) via plasma-induced surface polymerization was studied. Charge neutrality of PSBMA-grafted layers on PP membrane surfaces was controlled by the low-pressure and atmospheric plasma treatment in this study. The effects of grafting composition, surface hydrophilicity, and hydration capability on blood compatibility of the membranes were determined. Protein adsorption onto the different PSBMA-grafted PP membranes from human fibrinogen solutions was measured by enzyme-linked immunosorbent assay (ELISA) with monoclonal antibodies. Blood platelet adhesion and plasma clotting time measurements from a recalcified platelet-rich plasma solution were used to determine if platelet activation depends on the charge bias of the grafted PSBMA layer. The charge bias of PSBMA layer deviated from the electrical balance of positively and negatively charged moieties can be well-controlled via atmospheric plasma-induced interfacial zwitterionization and was further tested with human whole blood. The optimized PSBMA surface graft layer in overall charge neutrality has a high hydration capability and keeps its original blood-inert property of antifouling, anticoagulant, and antithrmbogenic activities when it comes into contact with human blood. This work suggests that the hemocompatible nature of grafted PSBMA polymers by controlling grafting quality via atmospheric plasma treatment gives a great potential in the surface zwitterionization of hydrophobic membranes for use in human whole blood.

Human embryonic stem cells cultured on hydrogels grafted with extracellular matrix protein-derived peptides with polyethylene glycol joint nanosegments.

Human pluripotent stem cells (hPSCs) can be proliferated on completely synthetic materials under xeno-free cultivation conditions using biomaterials grafted with extracellular matrix protein (ECM)-derived peptides. However, cell culture biomaterials grafted with ECM-derived peptides must be prepared using a high concentration of peptide reaction solution (e.g. 1000 µg/ml), whereas the ECM concentration of the ECM-coated surface for hPSC culture is typically 5 µg/ml. We designed a polyethylene glycol (PEG) joint nanosegment (linker) to be used between base cell culture biomaterials and bioactive ECM-derived peptides to enhance the probability of contact between ECM-derived peptides and cell binding receptors of hPSCs. Vitronectin-derived peptides with glycine joint nanosegments (GCGG) were conjugated onto poly (vinyl alcohol-co-itaconic acid) hydrogels via PEG joint nanosegments, and human embryonic stem cells (hESCs) were cultivated on these hydrogels. hESCs could successfully be cultivated on hydrogels while maintaining their pluripotency and differentiation potential to differentiate into cells that are induced from three germ layers in vitro and in vivo, where only a 50 µg/ml ECM-derived peptide concentration was used when the PEG joint nanosegments were introduced into peptides that were grafted onto hydrogel surfaces. The joint nanosegments between bioactive peptides and base cell culture biomaterials were found to contribute to efficient hESC attachment and proliferation.

Effect of extracellular matrix proteins on the differentiation of human pluripotent stem cells into mesenchymal stem cells.

The transplantation of human mesenchymal stem cells (hMSCs), such as bone marrow stem cells (BMSCs) and adipose-derived stem cells (ADSCs), has shown beneficial effects in protecting transplanted tissues and cells against graft-versus-host disease (GVHD). Human pluripotent stem cell (hPSC)-derived mesenchymal stem cells (MSCs) can also be used to generate hMSCs with stable characteristics without limitations. Therefore, we differentiated human induced pluripotent stem cells (hiPSCs, H-M5) and human embryonic stem cells (hESCs, H9) into hMSCs on dishes coated with different extracellular matrix (ECM) proteins to study the effect of cell culture biomaterials on hPSC differentiation into hMSCs. hPSC-derived MSCs cultured on Matrigel (MAT)-coated, collagen (COL)-coated and laminin-521 (LN-521)-coated tissue culture polystyrene (TCP) dishes showed excellent proliferation speed and reduced aging over 10 passages. High MSC surface marker (CD44, CD73, CD90 and CD105) expression was also observed on hPSC-derived MSCs cultured on MAT-coated, COL-coated and LN-521-coated TCP dishes as well as uncoated TCP dishes. Analysis of late osteogenic differentiation by evaluation of mineral deposition revealed that hPSC-derived MSCs cultured on fibronectin (FN)-coated and LN-521-coated TCP dishes showed high osteogenic differentiation. ECM proteins are effective as coating materials on cell culture biomaterials to regulate the proliferation and differentiation fate of hPSC-derived MSCs.

Neuronal Cell Differentiation of Human Dental Pulp Stem Cells on Synthetic Polymeric Surfaces Coated With ECM Proteins.

Stem cells serve as an ideal source of tissue regeneration therapy because of their high stemness properties and regenerative activities. Mesenchymal stem cells (MSCs) are considered an excellent source of stem cell therapy because MSCs can be easily obtained without ethical concern and can differentiate into most types of cells in the human body. We prepared cell culture materials combined with synthetic polymeric materials of poly-N-isopropylacrylamide-co-butyl acrylate (PN) and extracellular matrix proteins to investigate the effect of cell culture biomaterials on the differentiation of dental pulp stem cells (DPSCs) into neuronal cells. The DPSCs cultured on poly-L-ornithine (PLO)-coated (TPS-PLO) plates and PLO and PN-coated (TPS-PLO-PN) plates showed excellent neuronal marker (ßIII-tubulin and nestin) expression and the highest expansion rate among the culture plates investigated in this study. This result suggests that the TPS-PLO and TPS-PN-PLO plates maintained stable DPSCs proliferation and had good capabilities of differentiating into neuronal cells. TPS-PLO and TPS-PN-PLO plates may have high potentials as cell culture biomaterials for the differentiation of MSCs into several neural cells, such as cells in the central nervous system, retinal cells, retinal organoids and oligodendrocytes, which will expand the sources of cells for stem cell therapies in the future.

Corrigendum to 'Application of bioactive hydrogels combined with dental pulp stem cells for the repair of large gap peripheral nerve injuries' [Bioactive Mater. 6 (3) (2021) 638-654].

[This corrects the article DOI: 10.1016/j.bioactmat.2020.08.028.].

Poly(vinyl alcohol-co-itaconic acid) hydrogels grafted with several designed peptides for human pluripotent stem cell culture and differentiation into cardiomyocytes.

We developed poly(vinyl alcohol-co-itaconic acid) (PV) hydrogels grafted with laminin-derived peptides that had different joint segments and several specific designs, including dual chain motifs. PV hydrogels grafted with a peptide derived from laminin-ß4 (PMQKMRGDVFSP) containing a joint segment, dual chain motif and cationic amino acid insertion could attach human pluripotent stem (hPS) cells and promoted high expansion folds in long-term culture (over 10 passages) with low differentiation rates, whereas hPS cells attached poorly on PV hydrogels grafted with laminin-α5 peptides that had joint segments with and without a cationic amino acid or on PV hydrogels grafted with laminin-ß4 peptides containing the joint segment only. The inclusion of a cationic amino acid in the laminin-ß4 peptide was critical for hPS cell attachment on PV hydrogels, which contributed to the zeta potential shifting to higher values (3-4 mV enhancement). The novel peptide segment-grafted PV hydrogels developed in this study supported hPS cell proliferation, which induced better hPS cell expansion than recombinant vitronectin-coated dishes (gold standard of hPS cell culture dishes) in xeno-free culture conditions. After long-term culture on peptide-grafted hydrogels, hPS cells could be induced to differentiate into specific lineages of cells, such as cardiomyocytes, with high efficiency.

Application of bioactive hydrogels combined with dental pulp stem cells for the repair of large gap peripheral nerve injuries.

Due to the limitations in autogenous nerve grafting or Schwann cell transplantation, large gap peripheral nerve injuries require a bridging strategy supported by nerve conduit. Cell based therapies provide a novel treatment for peripheral nerve injuries. In this study, we first experimented an optimal scaffold material synthesis protocol, from where we selected the 10% GFD formula (10% GelMA hydrogel, recombinant human basic fibroblast growth factor and dental pulp stem cells (DPSCs)) to fill a cellulose/soy protein isolate composite membrane (CSM) tube to construct a third generation of nerve regeneration conduit, CSM-GFD. Then this CSM-GFD conduit was applied to repair a 15-mm long defect of sciatic nerve in a rat model. After 12 week post implant surgery, at histologic level, we found CSM-GFD conduit could regenerate nerve tissue like neuron and Schwann like nerve cells and myelinated nerve fibers. At physical level, CSM-GFD achieved functional recovery assessed by a sciatic functional index study. In both levels, CSM-GFD performed like what gold standard, the nerve autograft, could do. Further, we unveiled that almost all newly formed nerve tissue at defect site was originated from the direct differentiation of exogeneous DPSCs in CSM-GFD. In conclusion, we claimed that this third-generation nerve regeneration conduit, CSM-GFD, could be a promising tissue engineering approach to replace the conventional nerve autograft to treat the large gap defect in peripheral nerve injuries.

Laminin-511 and recombinant vitronectin supplementation enables human pluripotent stem cell culture and differentiation on conventional tissue culture polystyrene surfaces in xeno-free conditions.

Human pluripotent stem cells (hPSCs) are typically cultivated on extracellular matrix (ECM) protein-coated dishes in xeno-free culture conditions. We supplemented mixed ECM proteins (laminin-511 and recombinant vitronectin, rVT) in culture medium for hPSC culture on conventional polystyrene dishes. Three hPSC cell lines were successfully cultivated on uncoated polystyrene dishes in medium supplemented with optimal conditions of laminin-511 and rVT. Excellent colony shape and colony size as well as high expansion fold of hPSCs were found under these conditions, whereas the colony size was small and poor expansion fold was found solely on L-511-coated dishes. A small portion of L-511 in the culture medium supported hPSC adhesion and prevented the adhesion from being too strong on the uncoated dishes, and rVT in the culture medium further supported adhesion of hPSCs on the dishes by maintaining their pluripotency. Having the optimal composition of L-511 and rVT in the culture medium was important for generating good hPSC colony shapes and sizes as well as a high expansion fold. After long-term culture of hPSCs on uncoated dishes supplemented with the mixed proteins, the hPSCs successfully showed pluripotent markers and could differentiate into a specific lineage of cells, cardiomyocytes, with high efficiency.

Tunable bioadhesive copolymer hydrogels of thermoresponsive poly(N-isopropyl acrylamide) containing zwitterionic polysulfobetaine.

This work describes a novel tunable bioadhesive hydrogel of thermoresponsive N-isopropylacrylamide (NIPAAm) containing zwitterionic sulfobetaine methacrylate (SBMA). This novel hydrogel highly regulates general bioadhesive foulants through the adsorption of plasma proteins, the adhesion of human platelets and cells, and the attachment of bacteria. In this investigation, nonionic hydrogels of polyNIPAAm, zwitterionic hydrogels of polySBMA, and three copolymeric hydrogels of NIPAAm and SBMA (poly(NIPAAm-co-SBMA)) were prepared. The copolymeric hydrogels exhibited controllable temperature-dependent swelling behaviors and showed stimuli-responsive phase characteristics in the presence of salts. The interactions of these hydrogels with biomolecules and microorganisms were demonstrated by protein adsorption, cell adhesion, and bacterial attachment, which allowed us to evaluate their bioadhesive properties. An enzyme-linked immunosorbent assay (ELISA) with monoclonal antibodies was used to measure different plasma protein adsorptions on the prepared hydrogel surfaces. At a physiological temperature, the high content of the nonionic polyNIPAAm in poly(NIPAAm-co-SBMA) hydrogel exhibits a high protein adsorption due to the interfacial exposure of polyNIPAAm-rich hydrophobic domains. A relatively high content of polySBMA in poly(NIPAAm-co-SBMA) hydrogel exhibits reduced amounts of protein adsorption due to the interfacial hydration of polySBMA-rich hydrophilic segments. The attachment of platelets and the spreading of cells were only observed on polyNIPAAm-rich hydrogel surfaces. Interestingly, the incorporation of zwitterionic SBMA units into the polyNIPAAm gels was found to accelerate the hydration of the cell-cultured surfaces and resulted in more rapid cell detachment. Such copolymer gel surface was shown to be potentially useful for triggered cell detachment. In addition, the interactions of hydrogels with bacteria were also evaluated. The polySBMA-rich hydrogels exhibited evident antimicrobial properties when they were incubated with Gram-positive bacteria ( S. epidermidis ) and Gram-negative bacteria ( E. coli ). This work shows that the bioadhesive properties of poly(NIPAAm-co-SBMA) hydrogels can be effectively controlled via regulated nonionic and zwitterionic molar mass ratios. The tunable-bioadhesive behavior of temperature-sensitive poly(NIPAAm-co-SBMA) makes this biocompatible hydrogel appropriate for biomedical applications.

Culture and differentiation of purified human adipose-derived stem cells by membrane filtration via nylon mesh filters.

Human adipose-derived stem cells (hASCs) cultured for 5 passages were filtered through nylon (NY) mesh filter membranes coated with and without extracellular matrix proteins to obtain the permeation solution. Subsequently, the culture media were filtered via the membranes to obtain the recovery solution. Then, the membranes were cultured in cell culture medium to obtain the migrated cells from the membranes. The hASCs in the permeation solution, through any type of NY mesh filter membrane having 11 and 20 µm pore sizes, had lower osteogenic differentiation ability than conventional hASCs cultured on tissue culture polystyrene (TCP) dishes for passage 5, whereas the hASCs purified by the membrane migration method through NY mesh filter membranes coated with recombinant vitronectin, which have 11 and 20 µm pore sizes, showed a higher proliferation speed as well as higher osteogenic differentiation potential than the conventional hASCs cultured on TCP dishes for passage 5. The membrane filtration and migration methods would be useful for cell sorting for specific cells, such as hASCs with high proliferation and high osteogenic differentiation ability, which do not need antibody binding or genetic modification of the cells for the specific isolation of the cells.

Enrichment of cancer-initiating cells from colon cancer cells through porous polymeric membranes by a membrane filtration method.

Cancer-initiating cells (CICs) or cancer stem cells (CSCs) are primarily responsible for tumor initiation, growth, and metastasis and represent a few percent of the total tumor cell population. We designed a membrane filtration protocol to enrich CICs (CSCs) from the LoVo colon cancer cell line via nylon mesh filter membranes with 11 and 20 µm pore sizes and poly(lactide-co-glycolic acid)/silk screen (PLGA/silk screen) porous membranes (pore sizes of 20-30 µm). The colon cancer cell solution was filtered through the membranes to obtain a permeate solution. Subsequently, the cell culture medium was filtered through the membranes to collect the recovery solution where the cells attached to the membranes were rinsed off into the recovery solution. Then, the membranes were cultivated in the cultivation medium to collect the migrated cells from the membranes. The cells migrated from any membrane had higher expression of the CSC surface markers CD44 and CD133, had higher colony formation levels, and produced more carcinoembryonic antigen (CEA) than the colon cancer cells cultivated on conventional tissue culture plates (control). We established a method to enrich the CICs (CSCs) of colon cancer cells from migrated cells through porous polymeric membranes by the membrane filtration protocol developed in this study.